Webdynpro for abap: my cProjects enhancement post-exit is not working?

I enhanced this WD 'DPR_PROJECTS_VIEW' View'VI_PROJECTS_VIEW'.
created a post-exit in method 'MODIFY_BREADCRUMB', but it is not working.
the post-exit is not run.
May I know the reason? What should I do?

Hi Duan,
just to take care of the simple things first - Have you activated the enhancement? (I'm sure you have!) have you put in a breakpoint in the modify_breadcrumb method to see that it is being called at all?
Is it possible that the method is returning/exiting before your enhancement gets processed?
Cheers,
Chris

Similar Messages

Webdynpro for ABAP - interactive Adobe form - drop down lists not working

Hi all,
I'm trying to create an interactive form for a client using webdynpro for ABAP and I've viewed the demo "Create SAP Interactive Forms by Adobe with Web Dynpro for ABAP" by Thomas Jung, but when I implement it the form following similar steps the form is not interactive.
In the properties of the "InterativeForm", I've tried clicking the "enabled" flag both on and off. I've also tried setting the "displayType" property to both "ActiveX" and "Native". But none of this worked.
I though my problem might be with Adobe reader so I switched from 8.0 back to 7.0 but this didn't make any difference either.
The system we are using is NW04s WAS 700. Any hints would be greatly appreciated!
Thanks,
-tom

Thanks for the suggestion Dezso. I've downloaded a newer version of ACF as indicated by the OSS note and installed it. I'm still having the same issue.
My basic question is what options should I be using in the form and on the InteractiveForm component? It looks like because of the evolution of the product there are multiple options available. I recall reading somewhere that as of a certain SP level we should have ZCI (zero client install) available. The would be our preference. It will be a support nightmare if each user needed a manual download of ACF.exe installed.
Should I click the "enabled" flag on the InteractiveForm object? When I create the form should I use the "Native" drop down list or the one from the "Active X" tab? I would like to use the "List Box" control on the form as well but it is only available in the "Standard" tab. So does that mean I can't get the selections from a "List Box"?
Thanks,-tom

SC Webdynpro Enhancement Post Exit impacts to BBP_PD_SC_GETDETAIL

Hi,
SC delivery address Webdynpro component Enhancement Post Exit Method defaults c/o name, phone and email fields using
existing attribute field. In this scenario values are populated on the screen and saved to the database. But in the Doc check BADI BBP_PD_SC_GETDETAIL will not retrieve the c/o name, email and phone while saving the shopping cart. SAP responded saying that i have to perform update in post exit. Below are the classes/Methods referred by SAP.
"/SAPSRM/IF_CLL_MAPPER~UPDATE" from class /SAPSRM/CL_CH_WD_DODM_SHIPTO,
there is a method call "CALL METHOD lo_pdo_shipto->update_item_partners
Issue is still not resolved after using above methods.
But if user manually enters a vlaue there is no issue everything works fine. Issue is only when system defaults and as per SAP screen changes are not picked unless it is updated. Not sure what update means?
In web dynpro enhancement framework when code is written in post exit is there any update process for buffers to be done? if so can you let me know how?
Thank You,
Vineela

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Webdynpro for ABAP not closing browser window after click Exit

Hi Experts,
We come across a minor problem when executing a Webdynpro for ABAP on our Production Portal.
We have a "Exit" button which suppose to close the browser window with the webdynpro codes called but it failed to do so.
The execution steps of the Webdynpro app:
     Click "Exit"
     Click "No"
     Results message in the browser:
The code we use to exit and close the Web Dynpro application
* Code to close the application when the WebDynpro is executed
* as an independent application
* Also requires an Outbound Plug (GO_EXIT) in the main Window
data : lr_ref      type ref to ig_main_window.
lr_ref = wd_this->get_main_window_ctr( ).
lr_ref->fire_go_exit_plg( close_window = abap_true ).
What would be the issue causing this, the Webdynpro codes or Portal config?
Our systems are SAP NW 7.31 with:
ECC6 (Basis 731 SP10)
Portal (Basis 1000.7.31.7.0.20130227234100)
Thank you for your help & advise.
Derek Phung

Hi Tashi,
Thank you for your quick response & help.
According to your more info link, the check will return ABAP_TRUE as the webdynpro app is ran on Portal.
Sorry i should have mention that I got it working on our Dev & Test portal but now forgotten how i have done it, we now need it config for our production portal. I have vague memory collection that i config it somewhere on the portal, maybe one of the Application Modules in NWA?
Any advise, help, hints would be very much appreciated.
Thank You & regards,
Derek

Follow-up webdynpro for abap using portal theme nw2004s, sp12

Hello,
I wanted to get a follow up to this thread,
Re: webdynpro for abap using portal theme nw2004s, sp12
We are having a problem with the way reports developed in Web Dynpro for ABAP displayed in the portal (the pop-ups and dropdowns look out of wack). The issue appears when we wrap the reports into portal themes (either standard or custom). As per the thread (the link for which I posted above), the suggestion was to apply WDFORCEEXTERNALSTYLESHEET parameter to the WDP, however our system doesn't have this parameter in the system, but it seems like I can create my own parameter. Can some on give me all of the properties assigned to WDFORCEEXTERNALSTYLESHEET in table WDY_APP_PROP_DEF.
Thank you

Hi Brad, I was trying to apply the note 1033496 but our ABAP servers does not have the WDFORCEEXTERNALSTYLESHEET parameter available in WDY_APP_PROP_DEF table. All other notes are not applicable to our issue.
The portal is NW2004s SP12, the ABAP server is NW2004 SP11
Regards.
Message was edited by:
Aleks Ozerov

Article: Screen Conversion in WebDynpro for ABAP

Hi all,
       I want to share with you my first article that i posted in SDN. Looking for your valuable comments...
Click the below link to read by article. Thanks.
<a href="http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/screen%20conversion%20in%20web%20dynpro%20abap.pdf">Screen Conversion in WebDynpro for ABAP</a>
Some of the links in the article are not accessable from the article. The links are given below.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712">Getting Started with Web Dynpro for ABAP</a>
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/30/f2156a26fb4b4d86c5b0ce9f86bfb3/content.htm">Wizard</a>
[url=http://help.sap.com/saphelp_erp2005/helpdata/en/73/e5e6418b7eca17e10000000a155106/content.htm]Restrictions[/url]

HI Hema,
What i understood from u r query is u want 2 refrsh all ui elements data.
u can read data from the respective nodes and clear those data.
Example: I want to delete contents of an ui element on the screen( FULL_NAME ).
create a buuton REFRESH on the screen and assicn a action to that button.u wil get a method with that action.write this follwing code in tat method.
method ONACTIONREFRESH_UI .
    DATA lo_nd_processedby TYPE REF TO if_wd_context_node.
    DATA lo_el_processedby TYPE REF TO if_wd_context_element.
    DATA ls_processedby TYPE wd_this->element_processedby.
    DATA lv_full_name LIKE ls_processedby-full_name.
navigate from <CONTEXT> to <PROCESSEDBY> via lead selection
    lo_nd_processedby = wd_context->get_child_node( name = wd_this->wdctx_processedby ).
get element via lead selection
    lo_el_processedby = lo_nd_processedby->get_element( ).
get single attribute
    lo_el_processedby->get_attribute(
      EXPORTING
        name = `FULL_NAME`
      IMPORTING
        value = lv_full_name ).
clear lv_full_name.
CALL METHOD lo_el_processedby->set_attribute
EXPORTING
    value = lv_full_name
    name   = `FULL_NAME`
endmethod.
reward if it is use ful

WDA: TreeByNestingTableColumn and ALV in webdynpro for ABAP

Hi,
1) I am trying to implement a tree with nested structure and multiple columns. I am using RecursionNode in the context and UI element TreeByNestingTableColumn. I am not able to figure out how to make a distinction between the key and parent key. In TreeByKeyTableColumn, we use key and parent key to differentiate. Is there any link which explains how to implement TreeByNestingTableColumn in Webdynpro for ABAP? (I got a link for webdynpro for java though).
2) Can ALV be used to implement a tree structure instead of using Table with TreeByNestingTableColumn or TreeByKeyTableColumn? Then I would be readily able to use ALV features like sort etc. If it can be used is there any link which explains how to do it in Webdynpro for ABAP?

Hi Srinivasa,
I can answer the first point. If you use a recursive node and TreeByNestingTableColumn, there is no need to have a rowKey and parentRowKey, since the recursion with the context already defines the hierarchy. As far as I know someone posted a blog that explains how to use the TreeByNestingTableColumn in Web Dynpro Java. I don't have the link available, but this blog would be good place to start. The implementation in WDA and WDJ is pretty much the same here.
Kind regards,
Thomas

Issue regarding cell action in webdynpro for abap alv

hello gurus,
       i have one requirement in webdynpro for abap alv.i have one alv table in that i have one coloun employee name.
for that i have provided F4 help and that is editable field.if i select value from F4 help it is getting value correctly and it is showing properly at the same time it is allowing values entered manually insted of from F4 help.but as per my requiremnet it should not allow any manually entered values.how can i get this functinality. i am not aware indepth od WDA.
could you go through my isssue and could you revert me some solution.
thanks in advance.

Hi,
   I dont think this is possible because when you can change the value using F4 then it would obviously be
   possible to enter manually.
   You can try using a drop down instead because in drop down you cannot enter values manually,
   But this would be good if the values that can be shown in drop down are very low, if the values are more
   then again user will face problems selecting values.
   Else you can try out what srinivas suggested, But dont know whether we can have two cell editors at a time
   inside a single cell of ALV. Please post the answer if you have found any other way to do it.

OCI with WebDynpro for ABAP in SRM 5.0

Hi there,
Can somebody tell me how the OCI interface has to be controlled in SRM 5.0 when free order forms are made with WebDynpro for Abap ?
Thanks.

You have posted your message to the wrong forum. This forum is for SRM eSourcing.

Webdynpro for ABAP versus Enterprise Services

Hi,
With ECC 6.0 the WebDynpro for ABAP will be available. After converting my well-known ABAP-dynpro screens to WebDynpro I will have the possibility to expose all R/3 functionality from within the portal.
Two years from now the Enterprise Services will be there. What will be the reason(s) for using enterprise services instead of WebDynpro for abap to make R/3 functionality available in the portal? I think at the end both functionalities can co-exist but what are the criteria to use one or both methods?
Greetings Theo

Theo,
This is not a discussion relegated to the bar...
First the short methodology is correct... Id the processes, expose major entry points as Services, orchestrate, publish Service Desc, endpoints, etc., repeat...
The real question remaining is, if I believe my entire process is incorporated with a single SAP system why would I expose Services (and add the additional layer)?
I agree with the comment where if a process completely executes in a single environment there is no need to change its strategy and force it to be an orchestrated set of Service interactions. That is not inconsistent with providing Service interfaces along the process so that it can be composed into other processes either not yet in place or requiring cross-system interaction. ESA is not saying "break open the container and make every little piece operate as Enterprise Services", instead it guides us to Service enable components so that others can consume them in a standard way, regardless of implementation / execution environment.
As we think about leveraging ESA for the benefit of our businesses (our enterprise and the ecosystem of business partners and customers) we have to acknowledge that we do not and will not know where every step of a busines process will execute throughout time. There may be tremendous value in executing part of a process that could be performed in that same SAP system in a completely different environment. The main benefit of Service enabling is business agility for a reasonable cost. I would argue that at least the main entry and exit points to major processes should have Service interfaces, followed by a more comprehensive assessment of internal process steps - looking for opportunities.
The other side of the equation is determining what additional consumers of the process could be found if major parts of the process exposed Service interfaces. To say, "my process executes inside this one system, so I should not expose it as a set of Services", ignores the potential benefit of other systems being able to incorporate that process in their execution (or parts of a process). As we expose more, well defined Services that represent aspects of enterprise business processes we create an environment where there is low cost, opportunistic integration based on standards.
Or put more briefly, make sure to execute your business process in an efficent computing manner, but do not let that constraint limit your thinking when it comes to Services. They are two different (yet related) issues. Services simply give us another way to leverage an asset we already have. Make the asset available and if it has value to the organization, it will be consumed.
Hope that helps...
David

How to WebDynPro for ABAP?

Hi,
I don't know if I am posting on the right forum, if not please let me know where to post. And I thank you in advance for answering my question.
I am a ABAP programmer for past few years and just out of interest I want to learn WebDynpro ABAP skill. What tools do I need to learn/work on webdynpro for ABAP? And if you could please recommend any books available to quickly learn WebDynPro for ABAP.
At my work place they already have NSWD 70 but I heard it is more for webDynpro JAVA.
thanks,
Soumya.

Hi Soumya,
You have to post this forum in Application Server » Web Dynpro ABAP.
Refer this thread to start with Web Dynpro ABAP : Re: Web Dynpro ABAP step by step guide for sample applications
There are many blogs, tutorials on SDN for Web Dynpro ABAP.
Regards,
Anand G

SAP Webdynpro for ABAP - IXOS Integration for storing documents

Hi
We have a requirement to attach documents to a web based SAP custom application and store as attachments simialr to GOS fucntionality in SAPGUI. SAP web based application is developed using web dynpro for ABAP. Atatched documents are to be stored externally in IXOS system. I am looking for fucntion modules or BAPI's that integrate SAP webdynpro for ABAP and IXOS. Requirement is below
1)     From SAP Webdynpro for ABAP application read a file form desktop and store on external IXOS system.
2)     Retrieve a file from IXOS system and display in SAP Web Dynpro for ABAP application
3)     Delete a file on IXOS system from Web Dynpro for ABAP application
Thank You

You are on right track thinking about enhancement framework.
My approach is would be in the following order.
Personalization/customization
Enhancement
Modification

SAP standard example to get start with Webdynpro for ABAP

Hi,
I just started learning Webdynpro for ABAP.
I'm looking for SAP standard buit in applilcation example which explains all the the view controls, properties and Layout desining.
please let me know the standard applications of SAP for learning.
Many Thanks,
Gupta

hi..
just go to package SWDP_DEMO, it has all sample webdynpro applications using all UI elements.
By the way...question is posted in wrong forum
Regards
Manas Dua

Diff between BSP and WEBDYNPRO FOR ABAP?

Hi All,
can anyone let me know the Difference between BSP's and WEBDYNPRO FOR ABAP.
Regards,
Ravi

Hi Ravi,
In truth, Web Dynpro contains many of the enhancements than BSPs....like built-in value-help and select options...... they
will become standard in Web Dynpro. But these can also be added to BSPs also.
There are several architectural differences between BSP and WDA. WDA has some advanced features but more restrictive framework compared to BSP.
WDA is stateful only. While BSP supports both stateful and stateless programming models.
WDA doesn't aloow us to use our own custom HTML, JavaScript or other controls. To provide compatibility the rendering logic is completely hidden from the developer.
On the other hand, BSP has no such restrictions and allows an extreme level of custom rendering. This makes BSP a perfect platform for applications that require pixel-perfect layout or specialized UI elements.

Perform some changes on standard SAP webdynpro for ABAP application

Hi,
We do need to perform some changes (new buttons, new tabs, adding new code etc) on a standard SAP product developed on Webdynpro for ABAP.
Which is the best approach to do so? I have reading about enhancement framework and it seems to be right solution to do so. Am I correct?
Any best practice to acomplish our target is very welcome.
Looking forward to hearing from you.
Kind regards,
Imanol

You are on right track thinking about enhancement framework.
My approach is would be in the following order.
Personalization/customization
Enhancement
Modification

Webdynpro for abap: my cProjects enhancement post-exit is not working?

Similar Messages

Maybe you are looking for