Webdynpro for ABAP not closing browser window after click Exit

Hi Experts,
We come across a minor problem when executing a Webdynpro for ABAP on our Production Portal.
We have a "Exit" button which suppose to close the browser window with the webdynpro codes called but it failed to do so.
The execution steps of the Webdynpro app:
     Click "Exit"
     Click "No"
     Results message in the browser:
The code we use to exit and close the Web Dynpro application
* Code to close the application when the WebDynpro is executed
* as an independent application
* Also requires an Outbound Plug (GO_EXIT) in the main Window
data : lr_ref      type ref to ig_main_window.
lr_ref = wd_this->get_main_window_ctr( ).
lr_ref->fire_go_exit_plg( close_window = abap_true ).
What would be the issue causing this, the Webdynpro codes or Portal config?
Our systems are SAP NW 7.31 with:
ECC6 (Basis 731 SP10)
Portal (Basis 1000.7.31.7.0.20130227234100)
Thank you for your help & advise.
Derek Phung

Hi Tashi,
Thank you for your quick response & help.
According to your more info link, the check will return ABAP_TRUE as the webdynpro app is ran on Portal.
Sorry i should have mention that I got it working on our Dev & Test portal but now forgotten how i have done it, we now need it config for our production portal. I have vague memory collection that i config it somewhere on the portal, maybe one of the Application Modules in NWA?
Any advise, help, hints would be very much appreciated.
Thank You & regards,
Derek

Similar Messages

Prompting users for confimation when closing browser window

Hi All,
I would like to prompt the user with a popup-screen asking for confirmation that he wants to close the browser when hitting the browser-close ('X') button. Is this possible ?
If the user chose to cancel the browser window shoud remain open, with all content as it was... and of course if he chooses to continue the window should just close.
the WDA app is straight forward, and not running inside the portal.
Thanx in advance
-Tonni

Hi Tonni,
I thought I should add - the portal does implement a work protection mode that does allow you to prompt users if they navigate away from your page - and one of the best ways to implement that is through the FPM and its work protect mode interface.
However, that still doesn't help, I'm afraid, in the case where you're trying to stop the user closing the browser window...
I should also point out that some browsers do indeed produce an event which can be trapped on close of the window, and have been hugely exploited by website designers - to the extent that later/better versions no longer support it. Remember the web pages that when you closed spawned 3 more, and those 3 more etc. etc.
Cheers,
Chris
edit: also worth pointing out that the "Close" button provided within a portal session by the FPM is a form of navigation and can be trapped. Likewise any internal navigation button that perform the same sort of thing within your app.
Edited by: Chris Paine on Mar 29, 2010 3:08 PM

Firefox will not open new window after clicking on link

if I click on a hyperlink in an email message (Apple Mail) then Firefox will not open (if not running).
== This happened ==
Every time Firefox opened

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Webdynpro for ABAP versus Enterprise Services

Hi,
With ECC 6.0 the WebDynpro for ABAP will be available. After converting my well-known ABAP-dynpro screens to WebDynpro I will have the possibility to expose all R/3 functionality from within the portal.
Two years from now the Enterprise Services will be there. What will be the reason(s) for using enterprise services instead of WebDynpro for abap to make R/3 functionality available in the portal? I think at the end both functionalities can co-exist but what are the criteria to use one or both methods?
Greetings Theo

Theo,
This is not a discussion relegated to the bar...
First the short methodology is correct... Id the processes, expose major entry points as Services, orchestrate, publish Service Desc, endpoints, etc., repeat...
The real question remaining is, if I believe my entire process is incorporated with a single SAP system why would I expose Services (and add the additional layer)?
I agree with the comment where if a process completely executes in a single environment there is no need to change its strategy and force it to be an orchestrated set of Service interactions. That is not inconsistent with providing Service interfaces along the process so that it can be composed into other processes either not yet in place or requiring cross-system interaction. ESA is not saying "break open the container and make every little piece operate as Enterprise Services", instead it guides us to Service enable components so that others can consume them in a standard way, regardless of implementation / execution environment.
As we think about leveraging ESA for the benefit of our businesses (our enterprise and the ecosystem of business partners and customers) we have to acknowledge that we do not and will not know where every step of a busines process will execute throughout time. There may be tremendous value in executing part of a process that could be performed in that same SAP system in a completely different environment. The main benefit of Service enabling is business agility for a reasonable cost. I would argue that at least the main entry and exit points to major processes should have Service interfaces, followed by a more comprehensive assessment of internal process steps - looking for opportunities.
The other side of the equation is determining what additional consumers of the process could be found if major parts of the process exposed Service interfaces. To say, "my process executes inside this one system, so I should not expose it as a set of Services", ignores the potential benefit of other systems being able to incorporate that process in their execution (or parts of a process). As we expose more, well defined Services that represent aspects of enterprise business processes we create an environment where there is low cost, opportunistic integration based on standards.
Or put more briefly, make sure to execute your business process in an efficent computing manner, but do not let that constraint limit your thinking when it comes to Services. They are two different (yet related) issues. Services simply give us another way to leverage an asset we already have. Make the asset available and if it has value to the organization, it will be consumed.
Hope that helps...
David

Backend BSP session not closing on server after closing the window

Hi All,
We have SAP EP (7.0 SP21) and there is a BSP transaction ivew (Interaction Center ) intergrated in the portal. The issue is when the user performs any transactions inside the BSP and then closes the browser, session remains on the server till the timeout. Is there a way to end those sessions on server after closing the browser immediately?
Portal domain : xx.mycomp.com
ABAP system domain :mycom.com
Should the domains be same for the DSM of Portal to work or is there any solution that can be considered.
regards
Uday

Hi Uday,
These are the main issues that can cause issues with DSM:
JavaScript Origin Policy:
Scripting
between different domains is not allowed because of “JavaScript origin policy”.
Also
communication between mixed protocols (http\https) is forbidden.
Therefore
the portal server and the content server must be on the same domain and must
use the same protocol.
For
detailed explanation see:
http://mozilla.org/projects/security/components/same-origin.html
Popup Blocker:
•Popup blockers may cause troubles
in relation with SRA feature.
•Terminator handles notifications in
new window when current window is being destroyed (logoff, closing browser
window) – popup blocker prevents the opening of new window, hence no session
handling performed.
please also check SAP Note #596698 for more information typical problems and troubleshooting.
In general, the 2 domains should be the same.
xxx.mycomp.com, meaning that first part of the url can change but what comes after should be the same domain.
Best regards,
Etay

Not able to integrate Payment Gateway with WebDynpro for ABAP

Hi,
   I am not able to integrate the Payment Gateway for Billdesk ( third party software) with Webdynpro for ABAP.
Summery of the Issue : -
(*) Data from PORTAL Application to PAYMENT GATEWAY is going Correctly but
(*) Data from PAYMENT GATEWAY to PORTAL Application is not going correctly.
Details about the Problem : -
   I have created 3 View in Webdynpro Application for ABAP.
View 1 -> Sales Order
View 2 -> Confirm Order
View 3 -> Success Message
When I am on the View 2 i,e Confirm Order, I have a UI Element ( LINK TO URL) on this View. When I click on the Link it successful takes me to the Bill desk site(Payment Gateway Integrator).After selecting the Card Type - > Master card, or Visa or Amex, I am routed to the Gateway Site of the Citibank, Where I have to enter the CARD details like Card Number, CVV Number, Expiry Date, and press the Submit Button.
Which now takes me to the final confirmation site, stating
1) Order Number
2) Bank ID
3) Merchant ID
4) Amount
5) Authorize ( APPROVED / NOT APPROVED)
Now once i click on the Submit button, It transfers the amount of the Customer to my bank account, correctly and goes back to the my portal application.
Till here it is working correctly, but 1 parameter is missing which is called "msg", and this parameter contains important information regarding the payment. This parameter is sent back form the Gateway Site to my Portal.
1) Authorize STATUS
2) Check Sum
etc... which will be finally required to decided whether I should go on to create the Sales Order for the Customer or not.
If the Authorize Status = '0300' then only create the Sales Order other wise if the status is any thing else lets say not equal to '0300' then gives the message that the Credit Card is not authorize to process the Sales Order.
Regards,
Saurabh Bhatnagar
E : [email protected]

Dear Sir,
we are implementing Retail POS (Point of sale) for one retail company. We need to integrate third party payment gateway.
it's name is PLUTAS. We have got developer kit from Plutas (For trial ) . we have installed that kit in our system.
In my program, I am triggering " PL_TriggerTransaction" using call method. After triggering method it executes method, control passes to third party software. But I am not able to catch return parameter (Responce).
So that would be great if you help me out with this issue.
I wrote following code.
REPORT ZTEST678.
INCLUDE OLE2INCL.
data : rc_plutus type ole2_object,
lpszTransData type string,
lTxnType type char4,
lpszTransData1 TYPE string,
ret_string TYPE string,
l_count TYPE i,
l_time TYPE sy-uzeit.
rc_gui type ref to CL_GUI_CONTROL.
lTxnType = '4001'.                        "----
transaction type
lpszTransData = '1234567'.          " -
trasaction data
*create object rc_gui.
create object rc_plutus 'PLUTUSEXCHANGE.EXCHANGEOBJ'(001) no flush. "no flush ."queueonly.
call method of rc_plutus 'PL_TriggerTransaction'(002) = lpszTransData1
exporting
#1 = lTxnType
#2 = lpszTransData.
wait up to 20 seconds.
write: ret_string.                        " <----
Value is not coming
write: lpszTransData1.            " <----
Value is not coming

Webdynpro for ABAP - interactive Adobe form - drop down lists not working

Hi all,
I'm trying to create an interactive form for a client using webdynpro for ABAP and I've viewed the demo "Create SAP Interactive Forms by Adobe with Web Dynpro for ABAP" by Thomas Jung, but when I implement it the form following similar steps the form is not interactive.
In the properties of the "InterativeForm", I've tried clicking the "enabled" flag both on and off. I've also tried setting the "displayType" property to both "ActiveX" and "Native". But none of this worked.
I though my problem might be with Adobe reader so I switched from 8.0 back to 7.0 but this didn't make any difference either.
The system we are using is NW04s WAS 700. Any hints would be greatly appreciated!
Thanks,
-tom

Thanks for the suggestion Dezso. I've downloaded a newer version of ACF as indicated by the OSS note and installed it. I'm still having the same issue.
My basic question is what options should I be using in the form and on the InteractiveForm component? It looks like because of the evolution of the product there are multiple options available. I recall reading somewhere that as of a certain SP level we should have ZCI (zero client install) available. The would be our preference. It will be a support nightmare if each user needed a manual download of ACF.exe installed.
Should I click the "enabled" flag on the InteractiveForm object? When I create the form should I use the "Native" drop down list or the one from the "Active X" tab? I would like to use the "List Box" control on the form as well but it is only available in the "Standard" tab. So does that mean I can't get the selections from a "List Box"?
Thanks,-tom

Webdynpro for ABAP - Popup apearing for userid and pwd

Hi Experts,
We have implemented ESS and gone live. Now we have created one custom application in webdynpro for ABAP and attached with portal.
Initially there was a problem, the application was not getting executed because of system configuration, then I have configured the host name, port number correctly. Then the iView is getting loaded in the portal.
The problem is, when I am trying to access the iView, the popup apearing for the user id and password. This is happening only the webdynpro abap application, this is not happening for all sap standard iViews.
Could anyone help me with this issue?
Thanks
Jay

Hi Jayanthi,
as you had mentioned this is not happening for sap standard iViews(do you mean simple transaction iViews for which you have used a system alias, which was the same you had used for ABAP web dynpro iview)?
Of courese ESS iViews works with their own JCOs which is no way helpful or connected with wd ABAP.
So I believe if your SAP id and Portal id are different(or if they are same but SAP Logon ticket is not configured properly) then only it woudl ask for the authentication again- for Wd ABAP to work fine, only the connector property and WAS to tbe configured in the system object(aka system alias) used for ABAP iview. Now once you enter the login credentials, it is working fine right, then could you please test the user mapping under the user you are logged in, select the alias that you had used while creating the abap wd iView and provide userid/password here, then run the wd ABAP application, it definitely would work.
N.B: if you had provided the credentials once, then it woud be stored in the browser cache, so if you perform the user mapping in user admin, log off from portal, close all your browser windows, then clear cache,(cookies etc). then login to portal, run the wdABAP application, I am sure this would work(it worked for me!!!).
Thanks,
Jakes.

Display HTML code in WebDynpro for ABAP

Hi, I would like to display a html page in a WebDynpro View, ie: I have the html code in a "string" variable and would now display this string now not with the html tags visible, but as a "real" html page.
I found a thread in WebDynpro for ABAP but I am a little bit lost in converting the logic to ABAP world.
Thanks

>I found a thread in WebDynpro for ABAP but I am a little bit lost in converting the logic to ABAP world.
I'm a little bit confused by this statement. Do you mean you found a thread in Web Dynpro Java, perhaps?
Regardless the approach is possible using the iFrame UI. The warning about the iFrame is that it is deprecated in NetWeaver 7.0 and 7.01 and my not be usable depending upon your support package level. However in NetWeaver 7.02 the iFrame returns to fully supported status.
If you have the HTML content in a string, you can simply place it into the ICM cache. This will provide a temporary URL for the content (you supply the lifetime of the URL) that can be referenced via the iFrame URL or even the LinkToURL if you want to open in a new window.
Here is the code for placing the string into the ICM Cache:
****Create the cached response object that we will insert our content into
data: cached_response type ref to if_http_response.
create object cached_response
    type
      cl_http_response
    exporting
      add_c_msg        = 1.
try. " ignore, if compression can not be switched on
      call method cached_response->set_compression
        exporting
          options = cached_response->co_compress_based_on_mime_type
        exceptions
          others = 1.
    catch cx_root.
endtry.
****set the data and the headers
data: l_app_type type string.
      cached_response->set_cdata( lv_html_text ).
      l_app_type = 'text/html'.
cached_response->set_header_field( name = if_http_header_fields=>content_type
                                     value = l_app_type ).
cached_response->set_status( code = 200 reason = 'OK' ).
cached_response->server_cache_expire_rel( expires_rel = 60 ).
data: guid type guid_32.
call function 'GUID_CREATE'
    importing
      ev_guid_32 = guid.
concatenate '/sap/public' '/' guid '.' 'html' into lv_iframe_url.
****Cache the URL
cl_http_server=>server_cache_upload( url      = lv_iframe_url
                                       response = cached_response ).
wd_context->get_element( )->set_attribute(
    name = `IFRAME_URL`
    value = lv_iframe_url ).

In webdynpro for ABAP alv table issue

hello gurus,
                  i am new for webdynpro for ABAP.i strucked at one point at designing time.anybody could you suggest me on this.
thanks in advance.
let me explain my scenario first.
in my webdynpro for ABAP developement i have one alv table having ten fields.i am featching the data for eight fields from one Ztabale and updating , for rest of two fields we need to fill after displaying output using the respective F4 help. Right now these two fields are in input editable mode.now i am getting the values successfully from F4 help and at the same time it is allowing MANUAL ENTRIES also but as per my requirement it should not allow any manual entries . for this i have made these two fields are in readonly mode as like as rest of fields to avoid the MANUAL ENTRIES but at this time i didnot get any F4 helpfor those two fields.
so how can i achive my goal in this thing could any one suggest me.
my final conclusion is we need to get only F4 help values into those two fields . it should not allow any manual values at any point of time.
best regards,
babu

ya hi harshit,
      my self also used same code in my action part . here i have one table with four fields carrid , connid , fldate , price.
for carrid i have created freely programmed search help.but if it is in display mode there is no F4 help in enable mode.
in context for attribute carrid
DATA lo_nd_flight TYPE REF TO if_wd_context_node.
DATA lo_el_flight TYPE REF TO if_wd_context_element.
DATA ls_flight TYPE wd_this->element_flight.
DATA lt_flight TYPE wd_this->elements_flight.
navigate from <CONTEXT> to <FLIGHT> via lead selection
lo_nd_flight = wd_context->get_child_node( name = wd_this->wdctx_flight ).
select connid fldate price from sflight into CORRESPONDING FIELDS OF TABLE
    lt_flight UP TO 20 ROWS.
@TODO handle non existant child
IF lo_nd_flight IS INITIAL.
ENDIF.
get element via lead selection
lo_el_flight = lo_nd_flight->get_element( ).
alternative access via index
lo_el_flight = lo_nd_flight->get_element( index = 1 ).
@TODO handle not set lead selection
IF lo_el_flight IS INITIAL.
ENDIF.
get all declared attributes
lo_el_flight->get_static_attributes(
   IMPORTING
     static_attributes = ls_flight ).
CALL METHOD lo_nd_flight->bind_table
EXPORTING
    new_items            = lt_flight
   set_initial_elements = ABAP_TRUE
   index                =
DATA: lo_cmp_usage TYPE REF TO if_wd_component_usage.
DATA: lo_interfacecontroller TYPE REF TO iwci_salv_wd_table.
    instantiate ALV component usage if necessary
lo_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
    lo_cmp_usage->create_component( ).
ENDIF.
    pass reference to data node to instance of ALV usage
lo_interfacecontroller = wd_this->wd_cpifc_alv( ).
lo_interfacecontroller->set_data( r_node_data = lo_nd_flight ).
Configure ALV
DATA lr_config TYPE REF TO cl_salv_wd_config_table.
lr_config = lo_interfacecontroller->get_model( ).
**declerations
DATA: lt_columns TYPE salv_wd_t_column_ref,
        ls_columns TYPE salv_wd_s_column_ref,
        lr_input TYPE REF TO cl_salv_wd_uie_input_field,
        name TYPE string,
        lt_node_info TYPE wdr_context_attr_info_map,
        ls_node_info TYPE wdr_context_attribute_info,
        lv_tabix TYPE sy-tabix,
        lr_info TYPE REF TO if_wd_context_node_info.
TYPES: BEGIN OF ty_name,
          name TYPE string,
         END OF ty_name.
DATA: lt_name TYPE TABLE OF ty_name,
        ls_name TYPE ty_name.
**for getting node info
*Get the context node information
lr_info = lo_nd_flight->get_node_info( ).
lt_node_info = lr_info->get_attributes( ).
LOOP AT lt_node_info INTO ls_node_info.
    CASE ls_node_info-name.
      WHEN 'CARRID'.
        ls_name-name = ls_node_info-name.
        APPEND ls_name TO lt_name.
     WHEN 'REGIONALOFFICER'.
       ls_name-name = ls_node_info-name.
       APPEND ls_name TO lt_name.
     WHEN 'INSPECTORNAME'.
       ls_name-name = ls_node_info-name.
       APPEND ls_name TO lt_name.
    ENDCASE.
ENDLOOP.
*Logic for Table Horizontal Scrolling
lr_config->if_salv_wd_table_settings~set_visible_row_count( 13 ).
" lr_config->if_salv_wd_table_settings~set_width( '1085' ).
lr_config->if_salv_wd_table_settings~set_width( '100%' ).
lr_config->if_salv_wd_table_settings~set_scrollable_col_count( 8 ).
" lr_config->if_salv_wd_table_settings~set_fixed_table_layout( abap_true ).
lr_config->if_salv_wd_table_settings~set_first_visible_scroll_col( 'CARRID' ).
lr_config->if_salv_wd_table_settings~set_cell_action_event_enabled( abap_true ).
Set the table editable .
DATA: lr_table_settings TYPE REF TO if_salv_wd_table_settings.
lr_table_settings ?= lr_config.
lr_table_settings->set_read_only( abap_false ).
lr_table_settings->set_read_only( abap_true ).
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
        lr_column TYPE REF TO cl_salv_wd_column.
DATA: lt_string TYPE STANDARD TABLE OF string,
        ld_string TYPE string,
        ld_int TYPE i,
        lv_index TYPE i.
Make few columns editable and attach inputfield, if permitted.
    DATA lr_input_field TYPE REF TO cl_salv_wd_uie_input_field.
    CLEAR lt_string.
    APPEND 'CARRID' TO lt_string.
    LOOP AT lt_string INTO ld_string.
      lr_column_settings ?= lr_config.
      lr_column = lr_column_settings->get_column( ld_string ).
      CREATE OBJECT lr_input_field
        EXPORTING
          value_fieldname = ld_string.
      lr_input_field->set_read_only( abap_true ).
      lr_column->set_cell_editor( lr_input_field ).
    ENDLOOP.
    CLEAR lt_string.

WebDynpro for ABAP Vs Java

Hi all,
I have recently started learning Web Dynpro for ABAP.
I have worked in WebDynpro for Java.
1)I wanted to understand pros and cons of WebDynpro for ABAP and Java.
2)What are the functionality that are available in Web Dynpro for Java but not in Web Dynpro for ABAP.
3)What should be preferred when considering performance issues - WD for ABAP of Java?
Any Web Log or Link in this context will be helpful.
Thanks a lot,
Rashmi

Hi,
OOPs ABAP uses Classes and Interfaces which uses Methods and events.
If you have Java skills it is advantage for you.
There are Local classes as well as Global Classes.
Local classes we can work in SE38 straight away.
But mostly it is better to use the Global classes.
Global Classes or Interfaces are to be created in SE24.
SAP already given some predefined classes and Interfaces.
This OOPS concepts very useful for writing BADI's also.
So first create a class in SE 24.
Define attributes, Methods for that class.
Define parameters for that Method.
You can define event handlers also to handle the messages.
After creation in each method write the code.
Methods are similar to ABAP PERFORM -FORM statements.
After the creation of CLass and methods come to SE38 and create the program.
In the program create a object type ref to that class and with the help of that Object call the methods of that Class and display the data.
see the links below, Understand them and start developing.
chk out the links below:
General Tutorial for OOPS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
Have a look at these links for OO ABAP.
http://www.sapgenie.com/abap/OO/
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
SDN Series:
https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/webcontent/uuid/35eaef9c-0b01-0010-dd8b-e3b0f9ed7ccb [original link is broken]
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
Basic concepts of OOPS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b6cae890-0201-0010-ef8b-f970a9c41d47
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1591ec90-0201-0010-3ba8-cdcd500b17cf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
http://www.henrikfrank.dk/abapuk.html
http://www.erpgenie.com/abap/OO/
OOPS in ABAP
oops consept in abap
ABAP with OOPS
http://www.abap4.it/download/ALV.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
http://www.erpgenie.com/abap/controls/alvgrid.htm
OOPS with ABAP
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=37566
/people/rich.heilman2/blog/2005/07/27/dynamic-internal-tables-and-structures--abap
http://www.sapgenie.com/abap/OO/
Regards
Srinivas.K
Message was edited by:
Armin Reichert

Web-site as iframe in webdynpro for abap

Hello,
we want to integrate an external website like google maps as iframe in webdynpro for abap-window.
Is it possible?
Regards
Oliver
Edited by: Oliver Prodinger on Apr 18, 2010 11:41 AM

Hi,
Please be aware that this UI element is deprecated and is not to be used. But we can use it in unavoidable cases.
Refer to the below link for step by step procedure on how to use the iFrame element.
http://divulgesap.com/blog.php?p=MTI5
Regards,
Lak

Do we need to be in unicode to use webdynpro for abap in ECC6 ?

Hello,
we study migration to SAPR3 46C SR2 to ECC6.
a question is: Do we need to be in unicode to use webdynpro for abap in ECC6 ?
Our SAPR3 are in non unicode
thanks

The problem, if you backend system is not unicode, can be, that user with the browser accessing the Webdynpro page, can enter data of any codepage (because browser is Unicode), the data will then be stored with a wrong codepage in the system and will be destroyed.
Additionally all successor versions of ERP will be Unicode only.
And on top of that, if you plan to use Java components (such as a portal), the backend must be Unicode (see Note 975768 - Deprecation of Java features with non-Unicode Backend).
Markus

Firefox 3..7 problems with webdynpro for abap

Hello,
webdynpro for abap is not running in firefox 3.7 alpha.
Is the problem known?
Regards
Oliver

That isn't even a final release level of the browser - so it of course woudn't be supported. Check the PAM (Product Availability Matrix) http://service.sap.com/pam for the latest supported browser versions. Often you need the latest support package in order to have correct rendering on newer versions of the browsers.

Maximize and closing browser window

Hi all.
I have two problems.
I'm running a form in separateframe =true. I want to maximize the browser window. How can I do this???
The second problem: how can I close the browser window? I have create a post-form trigger and I put this code: web.show_document('JavaScript:window.close();','_self');
but nothing appens. Is there someone that can help me???
Thank you all,
Fabrizio

For closing the browser window after closing a form you need to create an html file with the following code in it.
for Internet Explorer:
<html>
<body onload="closeit()">
<script>
function closeit()
     win = top;
     win.opener = top;
     win.close ();
</script>
</body>
</html>Place this file where Oracle HTTP server can read (virtual directory) and call in in a post form trigger with web.show_document.
WEB.SHOW_DOCUMENT('http://machinename.domain:portno/mydirectory/close.html',
'_self');Make sure you use _self to the close the applet browser.
You can sue the same method to maximize the browser window too with the appropriate code.
Regards,
Tony

Webdynpro for ABAP not closing browser window after click Exit

Similar Messages

Maybe you are looking for