Weblogic 10.3.3 to 10.3.5 patch for linux 64 bit

hi,
I need weblogic 10.3.3 to 10.3.5 patch for linux 64 bit.
Thanks and regards,
Edited by: 853559 on Jun 14, 2012 8:32 AM

Hi,
the patch URL you can get from:
http://www.oratoolkit.ch/download/
but the thing is that you need to be an oracle customer with a valid customer support id (CSI) to download it. Without CSI there is no chance to get the patch.
Cheers,
David
OCP 9i / 10g
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

Similar Messages

Weblogic Server 6.1 trial version fails to install in Linux

Weblogic Server 6.1 trial version fails to install in Linux
(in Linux Redhat 6.2, jdk 1.2.2)
1. When unzipping the *.zip file "weblogic610_generic.zip", the unzip program
reported that some files and directories not properly named. (using winzip, quite
a number of files' directories start "d:/".
2. During installation, the screen hanged right after choosing language, and the
background threw "Exception in thread 'main'".

Yes, that is exactly what I ran and it worked.
Kernel: 2.2.12-20
java -fullversion
java full version "Linux_JDK_1.2.2_RC4"
That was to install.
Eric
"Mo Guangquan" <[email protected]> wrote in message
news:[email protected]...
Hello,
Could you give the detailed steps when you unzip and run? Did you only
use the command "java -cp weblogic610_generic.zip install -i console" andit
worked fine? Your system's basic setting like java version and kernal etc?
Thanks.
regards
mo
"Eric Gross" <[email protected]> wrote in message
news:[email protected]...
I actually did my test with RH 6.1. It worked fine.
Regards,
Eric
"Alexander Klimenko" <[email protected]> wrote in message
news:[email protected]...
Sorry guys,
but if you go to "supported platform" document you'll se just Linux RH
7.1
there.
Regards,
Alexander
"Mo Guangquan" <[email protected]> wrote:
error still occurs, guess it is because inside the zip file got some
wrong
absolute paths. error msg:
ZGUtil.getInputStream(): ZGUtil.openZipFile(): Couldn't open /us
java.io.IOException: ZGUtil.openZipFile(): Couldn't open /us
at ZeroGb.c([DashoPro-V1.2-120198])
at ZeroGb.a([DashoPro-V1.2-120198])
at ZeroGb.a([DashoPro-V1.2-120198])
at ZeroGb.m([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.i([DashoPro-V1.2-120198])
at
com.zerog.ia.installer.Main.<clinit>([DashoPro-V1.2-120198])
at install.main([DashoPro-V1.2-120198])
preinstaller.properties not found.
Exception in thread "main"
regards,
mo
"Eric Gross" <[email protected]> wrote in message
news:[email protected]...
Run the following to install it:
java -cp weblogic610_generic.zip install -i console
That will provide a console based install.
Regards,
Eric
"mo" <[email protected]> wrote in message
news:[email protected]...
Weblogic Server 6.1 trial version fails to install in Linux
(in Linux Redhat 6.2, jdk 1.2.2)
1. When unzipping the *.zip file "weblogic610_generic.zip", the
unzip
program
reported that some files and directories not properly named.
(using
winzip, quite
a number of files' directories start "d:/".
2. During installation, the screen hanged right after choosing
language,
and the
background threw "Exception in thread 'main'".

Where can i find the Weblogic Server 10.0 MP2 64-Bit for linux enviroment?

Can anyone help me with finding the location of download for the Weblogic 10.0 MP2 64-bit for linux.

Welcome to the forums !
A simple search returns this link
http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
HTH
Srini

Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment

Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment

Hi.
This is definitely not supported, and I don't know that any work is scheduled in the future
to support this JDK on WLS 5.1.
Having said that, I was able to start WLS 5.1sp12 with JDK 1.4 with no errors. I didn't
exercise any features, however.
Regards,
Michael
Rakesh Gupta wrote:
Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment--
Michael Young
Developer Relations Engineer
BEA Support

Do i need any patches for weblogic 6.1 (service pack 2 or 3) and sybase Jconnect5.5 ?

Hi
I am going use weblogic 6.1 (service pack 2 or 3) with Sybase Jconnect 5.5
. database is Sybase 12.0.0.4 or 12.5. Will i need any patches for this combination
to work? Please let me know.
thanks

Deepak
Thanks. your link was not helpful. It does not mention any patches required.
"Deepak Vohra" <[email protected]> wrote:
>
Sybase jConnect Driver
http://e-docs.bea.com/wls/docs61/jdbc/intro.html#intro016
"Madhavi" <[email protected]> wrote:
Hi
I am going use weblogic 6.1 (service pack 2 or 3) with Sybase Jconnect
5.5
. database is Sybase 12.0.0.4 or 12.5. Will i need any patches forthis
combination
to work? Please let me know.
thanks

Weblogic patch for the "Authentication for user wlsadmin denied" issue

Hi Everyone,
When I try to login to the weblogic console using the weblogic user id and password, I got below issue in the production server..Sometime back I saw a thread that Oracle has provided a patch for this issue. If any of you is aware of it then could you please provide us the patch file and its location please. This is quite a bit urgent. Awaiting for your response. Thanks in advance.
<Apr 3, 2011 10:41:02 PM ICT> <Critical> <Security> <BEA-090403> <Authentication for user wlsadmin denied>
<Apr 3, 2011 10:41:02 PM ICT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user wlsadmin denied
I need to communicate to onsite members about the patch details etc.
Edited by: user11290902 on May 13, 2011 1:27 AM

Faisal, Thank you for your response. Here the weblogic console id & password are known to few people so the guess you are making might be correct. Could anyone might have tried with incorrect credentials couple of times before we face this issue, I am not sure though. The moment we provide the credentials and upon click on Log In button we are getting j_security_check.
http://asdo0002:9683/console/j_security_check
Authentication Denied.
The username or password has been refused by WebLogic Server. Please try again.
Any information about the work--arounds or patches from weblogic would be helpful to me... Thanks a lot.

Patch for Jahia 3.1 to work WebLogic Server 6.1 with Struts is available!!!

I have a major patch for Jahia 3.1 server to work on WebLogic Server
          6.1 (so far I've tested it against WebLogic Server 6.1 sp3 & sp4, I'm
          sure it will work on sp1 and sp2 as well though). We do have complete
          support for strtus. If interested email me at [email protected]
          Regards


What is Jahia BTW?
          "Vitaly Veksler" <[email protected]> wrote in message
          news:[email protected]..
          > I have a major patch for Jahia 3.1 server to work on WebLogic Server
          > 6.1 (so far I've tested it against WebLogic Server 6.1 sp3 & sp4, I'm
          > sure it will work on sp1 and sp2 as well though). We do have complete
          > support for strtus. If interested email me at [email protected]
          >
          > Regards

URL for apache plugin for linux with weblogic 6.1

Hi,
can anyone tell me, where i can find the apache plugin for linux weblogic 6.1
thanks in advance,
cheers chris

Could you give some detail for this issue? I have tried the plugin with IIS6 and it does works.

Which JDK to install weblogic 10.3.3 in Linux 64 bit machine.

I jave a Linux 64 bit box. I am trying to find out suitable java env for installing weblogic. JDK 64 bit, downloaded from Sun, is raising noClassDefFound for java/lang/object. Not sure if my platform is not correct or that .bin file is wrong. Can I use jrockit for installation?

I tried installing 10.3.2 on 64 bit linux with the Sun JDK and had issues (smart update didn't work). I retried with JRockit and it installed just fine and smart update worked. I haven't created any domains though as I'm planning on installing OEM Grid 11g on it.

Patch for Weblogic 10.3.5 to install CO 13.4

Hi,
Is there any patch for Weblogic 10.3.5 which is to be applied before installing CO 13.4 ?
Thanks,
Amrita

You have to install WebLogic Server with Coherence to successfully run CO13.4
You would not need any additional patches.
Arun

WebLogic 10.3 doesn't implements equals() and hashCode() for TimerHandle?

Hi,
I'm using WebLogic 10.3 and need to use TimerHandle to handle some logic in my application.
Below is a scenario.
At the time by creating EJB Timer, I've saved the TimerHandle for later use into Database along with specific name as a key.
Then, at the time to execute/awaken timer I need to check that the saved TimerHandle is the same as passed Timer.
@Timeout
public void execute( final Timer timer )
// getting key from passed object in timer.getInfo().
// getting saved timerhandle by key. let's say dao.getXxxHandle(key);
// perform checking.
if ( timerHandle != null && timerHandle.equals( timer.getHandle() ) )
// do sth.
else
//do another thing.
The result is always drop in else block.
By doing this is working on WAS7 and JBoss4xx (getting to if block). I was wondering if WebLogic doesn't implements equals and hashCode method then is there another way to check that the retrieved TimerHandle is the same one as timer.getHandle()?
I'm thinking of adding some unique ID to see if timehandle is the same one or not? However as I mentioned, It works on WAS and JBoss. Does WebLogic has another way to handle my scenario?
Any help would be appreciate.
Thanks in advance,
Nattachai W.

As you have suggested, it looks like we don't override the equals() method on either our local or clustered TimerHandle implementations.
We opened a bug (9558396) so we can address it in a future patchset.
In the meantime, if you have an Oracle support contract, you could open a service request and ask for a patch for bug 9558396 to be created.
-steve-

I need weblogic 8.1 for linux

Hi,
Does anyone know from where to get the WebLogic 8.1 for linux? We are still using Weblogic 8.1 in production but we moved from Windows desktops to Linux desktops. That's why I need the Linux version.
Thanks in advance for any help on this matter.
Silviu

Hi,
This KM Article should Help
763603.1
~Ashish

Where to download Weblogic for linux 64

Hi,
Can you please provide me with the link to download Weblogic for linux 64.
Regards

Hi ebitar,
afaik, there is no version of WebLogic 10.3 that is just for 64-bit Linux. You would need to install a 64-bit JVM and then download the generic weblogic installer from http://download.oracle.com/otn/bea/weblogic/server103/server103_generic.jar (I.e. the link located under the HP column of the download page).
Someone please correct me if i'm wrong.
-Mr Jones.

Weblogic (10.3.2) support on Linux 64 bit?

Hi ,
Does weblogic 10.3.2 (11gR1) supported on Linux x86_64 ? We are using JRockit version BEA JRockit(R) (build R27.6.5-32_o-121899-1.6.0_14-20091001-2113-linux-x86_64, compiled mode)
Can soem body confirm.
Thanks,
Naveen

The link Tom shared goes up to 10.3.0, but for WLS 10.3.1 - also known as 11gR1 11.1.1.1, please check here:
http://www.oracle.com/technology/software/products/ias/files/oracle%20fusion%20middleware%2011gR1%20(11.1.1.x)%20certification%20matrix.xls
If the full link doesn't show up - go here:
http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
Note that 10.3.2 of WLS is in FMW 11.1.1.2, which is covered by the FMW 11.1.1.1+ sections of the spreadsheet.
There is a special note in the spreadsheet for 11.1.1.2 minimum JVM requirements:
"Minimum JDK Versions That Apply To Oracle Fusion Middleware 11gR1 (11.1.1.2+)
Oracle Fusion Middleware 11gR1 (11.1.1.2+) requires a minimum JDK version. The following minimum JDK versions apply:
Sun JDK 1.6.0_14+ (32-bit, 64-bit).
Oracle JRockit 6 Update 14 R27.6.5+ (32-bit, 64-bit).
HP JDK 6.0.05+ (32-bit, 64-bit).
IBM JDK 1.6.0 SR6+ (32-bit, 64-bit). Note: IBM JDK 1.6.0 SR6+ can be downloaded from http://www.ibm.com/developerworks/java/jdk/aix/service.html"
Edited by: james.bayer on Jul 8, 2010 1:22 PM

Error while applying patch for SOA suite 10.1.3.4 on Weblogic 9.2 - URGENT

Hi All,
I am trying to apply a weblogic patch on SOA server but facing an error while applying the Opatch . I checked the accessibilty to opatch inventory by using the command % opatch lsinventory . This executed fine and there were no errors. But when I try applying the opatch I get the error -that some jars missing . Even if I replace the jars and try executing opatch again I face the same error . I googled a lot but couldnt find any solution . Please let me what can be done for solving this error .
D:\7337034>opatch apply -oh D:\product\10.1.3.1\OracleAS_1
Oracle Interim Patch Installer version 1.0.0.0.61
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : D:\product\10.1.3.1\OracleAS_1
Oracle Home Inventory : D:\product\10.1.3.1\OracleAS_1\inventory
Central Inventory : C:\Program Files\oracle\inventory
from : N/A
OUI location : D:\product\10.1.3.1\OracleAS_1\oui
OUI shared library : D:\product\10.1.3.1\OracleAS_1\oui\lib\win32\oraInstalle
r.dll
Java location : "D:\product\10.1.3.1\OracleAS_1\jdk\jre\bin\java.exe"
Log file location : D:\product\10.1.3.1\OracleAS_1/.patch_storage/<patch ID>
/*.log
Creating log file "D:\product\10.1.3.1\oracleas_1\.patch_storage\7337034\Apply_7
337034_06-02-2009_13-39-26.log"
Provide your email address to be informed of security issues, install and
initiate Oracle Configuration Manager. Easier for you if you use your My
Oracle Support Email address/User Name.
Visit http://www.oracle.com/support/policies.html for details.
Email address/User Name: [email protected]
Provide your My Oracle Support password to receive security updates via your My
Oracle Support account.
Password (optional):
Password (optional):
Unable to establish a network connection to Oracle. If your systems require a
proxy server for outbound Internet connections, enter the proxy server details
in this format:
[<proxy-user>@]<proxy-host>[:<proxy-port>]
If you want to remain uninformed of critical security issues in your
configuration, enter NONE
Proxy specification: NONE
** Installing base package **
Deploying core - Version 10.3.1.0.0
Deploying engines - Version 10.2.7.1.0
Deploying metricdata - Version 10.2.4.0.3
Deploying scripts - Version 10.3.1.0.0
Oracle Configuration Manager has been configured in disconnected mode. If the
target ORACLE_HOME is running a database, please refer to the
"Post-installation Database Configuration" section of the OCM Installation
and Administration Guide
(http://www.oracle.com/technology/documentation/ocm.html) to complete the
installation.
View configuration data reports and access valuable configuration best
practices by going to My Oracle Support.
Backing up comps.xml ...
OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
cal system only.
Please shut down Oracle instances running out of this ORACLE_HOME
(Oracle Home = d:\product\10.1.3.1\oracleas_1)
Is this system ready for updating?
Please respond Y|N >
y
Applying patch 7337034...
Patching jar files...
OPatch encounters the following issues during file patching:
The following java archives on Windows had problems with being patched:
1. orabpel.jar
[ object: DomainFilter.class ]
2. orabpel.jar
[ object: AdapterFrameworkListenerImpl$RoutingRuleXPathInfo.class ]
3. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
4. orabpel.jar
[ Couldn't make backup copy of file. ]
5. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
6. orabpel.jar
[ Couldn't make backup copy of file. ]
7. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
8. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
9. orabpel.jar
[ Couldn't make backup copy of file. ]
Replying 'Y' will terminate the patch installation immediately. It WILL NOT rest
ore any updates that have been performed to this point. It WILL NOT update the i
nventory.
Replying 'N' will update the inventory showing the patch has been applied.
NOTE: After replying either 'Y' or 'N' it is critical to review:
My Oracle Support Note 312767.1 How to rollback a failed Interim patch ins
tallation.
Do you want to STOP?
Please respond Y|N >
y
File Patching Error!
ERROR: OPatch failed during patching, possibly due to missing files.
OPatch returns with error code = 200

Hi , I am facing the same issue.
were you able to resolve it.
please let me know if you were.
Many Thanks.

Weblogic 10.3.3 to 10.3.5 patch for linux 64 bit

Similar Messages

Maybe you are looking for