Weblogic platform migration
Hi everyone
i´m trying to find anything that can help me to migrate our weblogic installations/domains from a solaris platform to linux, is there any document to point me to the right direction, we have weblogic from 7 to 9
thanks in advance
Hi ,
If you are not using any Jboss specific libraries, minor changes might be required only in the database connectivity related code. Are you using XA driver for connections
Regards,
Thirumaran A
Similar Messages
-
Need Help in Cross Platform Migration
Hi Gurus,
can you please tell me best way to do Corss Platform Migration with minimum down time and we are planning to do from AIX TO HP-UX.
oracle version is 10g
and can we do the data sync using streems if it is can you give the steps to configure streems in cross platform.
Thanks in advance.High Availability Customer Case Studies, Presentations, Profiles, Analyst Reports, and Press Releases
[http://www.oracle.com/technology/deploy/availability/htdocs/HA_CaseStudies.html?_template=/ocom/print]
Check under Transportable Tablespace at the bottom
[Multi Terabyte Database Migration|http://www.oracle.com/technology/deploy/availability/pdf/TheHartfordProfile_XTTS.pdf]
HTH
Anantha -
Platform Migration Clarification
Greetings,
We are doing a platform migration of an E-Business R12.1.1 environment. We originally got to R12.1.1 by directly upgrading from 11.5.9.2 back in December, 2009.
Our source platform is: W2003 runs Apache and Forms, and "everything else" is on HPUX PA-RISC. Our target platform is HPUX Itanium. We will not be moving over our W2003 node; rather, the HPUX Itanium will do everything (that's the plan for now).
In following Metalink Note 438086.1, the last notation on Section 1 states: "if you have upgraded the tech stack components to higher versions than those included with the 12.0.4 install media, they will have to be upgraded..."
I would like to clairify what this means. My interpretation is that when we run Section 2, Step 6 "Install the Application Tier Technology Stack" that we are to use the R12.1.1 DVD media. Is this assumption correct?
Thanks...colinColin,
Your assumption is correct. In addition to that, you will need to consider upgrading to the latest OracleAS 10g and Developer 10g patchset (_if applicable_) as per (Note: 454811.1 - Upgrading to the Latest OracleAS 10g 10.1.3.x Patch Set in Oracle E-Business Suite Release 12) and (Note: 437878.1 - Upgrading Forms and Reports 10g in Oracle Applications Release 12).
You could log a SR to confirm this with Oracle support.
Thanks,
Hussein -
Platform migration from HP UX to RHEL
Hi all,
specifications of my system
EBS R12.0.4 , DB 10.2.0.3 (2 node RAC)
OS is HP UX 11.31
I have to migrate it to RHEL 5
I need advice on this process .Please refer to these docs.
Application Tier Platform Migration with Oracle E-Business Suite Release 12 [ID 438086.1]
Export/Import Process for Oracle E-Business Suite Release 12 using 10gR2 [ID 454616.1]
Migrating E-Business Suite Release 12 Databases Between Platforms
http://blogs.oracle.com/stevenChan/2008/09/migrating_ebs_12_databases_between_platforms.html
Thanks,
Hussein -
Virtual directory mapping in weblogic platform 7.0
Hi. I noticed in WebLogic Platform 7.0 there is a entry for
WEB-INF/weblogic.xml that defines a virtual directory. Example:
<!DOCTYPE weblogic-web-app PUBLIC "-//BEA Systems, Inc.//DTD Web
Application 7.0//EN"
"http://www.bea.com/servers/wls700/dtd/weblogic700-web-jar.dtd">
<weblogic-web-app>
<virtual-directory-mapping>
<local-path>C:\webapps\context\x\y</local-path>
<url-pattern>/images/*</url-pattern>
</virtual-directory-mapping>
</weblogic-web-app>
In this case I'm assuming that a request of the form
http:/host:7001/context/images/z.gif would map to the physical file
C:\webapps\context\x\y\z.gif. However I cannot get this to work. Is
my assumption about it's use incorrect? Is the syntax of
<local-path/> or <url-pattern/> wrong? Is there something you have to
do to get WebLogic to recognize the weblogin.xml file?
This is urgent. Please help.
Thanks.
Scott Steimle
Software Engineer
ConveraI see. In my case, x == images, so if I reverse my directory
structure I could still get this to work for me. For instance:
<virtual-directory-mapping>
<local-path>C:\webapps\context\y</local-path>
<url-pattern>/images/*</url-pattern>
</virtual-directory-mapping>
/images/z.gif would map to C:\webapps\context\y\images\z.gif.
I'll have to weigh changing our directory structure vs. keeping the
servlet we have that rewrites the URL.
Thanks for your help.
Scott Steimle.
Rajesh Mirchandani <[email protected]> wrote in message news:<[email protected]>...
From the developer
Virtual directories just replace the doc root. The doc root in your case
is C:\webapps\context\x\y. The request uri is /images/Z.gif. So the whole
thing resolves to C:\webapps\context\x\y\images\Z.gif. Which is where the
image should be located.
We have cleared up the docs. Sorry for any inconvenience.
Scott Steimle wrote:
Hi. I noticed in WebLogic Platform 7.0 there is a entry for
WEB-INF/weblogic.xml that defines a virtual directory. Example:
<!DOCTYPE weblogic-web-app PUBLIC "-//BEA Systems, Inc.//DTD Web
Application 7.0//EN"
"http://www.bea.com/servers/wls700/dtd/weblogic700-web-jar.dtd">
<weblogic-web-app>
<virtual-directory-mapping>
<local-path>C:\webapps\context\x\y</local-path>
<url-pattern>/images/*</url-pattern>
</virtual-directory-mapping>
</weblogic-web-app>
In this case I'm assuming that a request of the form
http:/host:7001/context/images/z.gif would map to the physical file
C:\webapps\context\x\y\z.gif. However I cannot get this to work. Is
my assumption about it's use incorrect? Is the syntax of
<local-path/> or <url-pattern/> wrong? Is there something you have to
do to get WebLogic to recognize the weblogin.xml file?
This is urgent. Please help.
Thanks.
Scott Steimle
Software Engineer
Convera -
Can upgrade to R12 with Maintenance Wiz be combined with platform migration
Hello,
Planning to upgrade our EBS 11i instance to R12. The source and target application servers are different and database server remains same.
Source Instance
Apps Server Deatails
Name : A1
OS : Linux 32 bit (RHEL 5)
EBS version: 11.5.10.2
DB Server Details
Name: D1
OS: Linux 64 bit (RHEL5)
DB version : 11.2.0.2
Destination Instance
Apps Server Deatails
Name : A2 ( Please note tha the server has been changed, as the OS is changed from 32 bit to 64bit)
OS : Linux 64 bit (RHEL 5)
EBS version: 11.5.10.2
DB Server Details
Name: D1 (No change in Server)
OS: Linux 64 bit (RHEL5)
DB version : 11.2.0.2
How to achieve this upgrade using Maintenance Wizard as the application servers OS will be changed during the upgrade?
Can you refer any document for the same?
I searched the forum but could not find anything related.
In the manual I see it is possible to set the platform when defining nodes, but it this meant/enough to also use this for a platform migration?
Thanks. Regards, Carlo.
Edited by: Carlo den Otter on May 6, 2013 7:05 AMYes you can use Maintenance Wizard to upgrade and move to a different platform. The tool does not care that you are switching platforms. It will perform all the 11i steps on the old platform / server. When you get to the 12.1 portion, Maintenance Wizard will execute the steps on the 12.1 platform. So just define the 12.1 nodes using the new platform os and you should be fine.
-
Cross platform migration from hp unix to sun
Hi
recently we have done cross platform migration from hp unix to sun (10g R2 RAC +ASM). It was a challenging experience to complete the migration in 8 hours downtime for a database of about 2 TB.
I would like to share the experience , so that it would be hepfull to others and i would learn more new techniques for improvement .
source environment:
HP-UX -ITANIUM - 2 node RAC - 10g R2 - Oracle clusterware - ASM - Heavily loaded all the time .
Destination Env:
Sun solaris 10 - 2 node RAC - 10g R2 - Oracle Clusterware - ASM
Total Downtime available : 6 hours.
Steps followed
1. snapshot backup of source database on a intermediate HP-Unix box. (stage area)
2. recover the database and start the rman image backup on to disk in stage area.
3. mount this filesystem locally (Veritas ) on to one of the node in the destination env.
4. Mount this filesystem as NFS on second node using a cross cable between both of them (we can use interconnect VLAN also here)
5. Keep applying the archive logs from source env till the downtime .
5. startup nomount the database , change the datafile names from ASM to RMAN image copy files and mount.
6. start rman convert statements and pump into the already exisitng ASM nodes with parallel sessions as much as possible (with 35 sets (513 datafiles) we were able to pump 2 TB data in 4.5 Hrs) - only system and undo datafiles need a convert statements (platform migration ) others would need a file system to ASM conversion only.
7. alter database open resetlogs in the destination environment.
8. create services manually and start the application.
we were given very less time to decide upon this stategy , By gods grace we were able to complete it .
I got a doubt while we are chalking out this plan .
can we connect to ASM instance remotely and pump data from one ASM to another ASM. It seems it is not possible , just a wild thought.
Let me know if you see any more improvements in this.
Thanks
Naveen samalacan we connect to ASM instance remotely and pump data from one ASM to another ASM. It seems it is not possible , just a wild thought.No. Thats not possible.
-
BW platform migration Error - R3ldctl
Hello,
We are getting an error during our BW platform migration while running SAPINST to perform the export.
We are running BW 3.1 on Oracle 9.2.0.5
In one of the steps, R3ldctl is executed and we get the following error in the R3ldctl.log:
<b>
ERROR: no free list for list_insert</b>
There is no indication of what is causing the error. Has anyone experienced this error? If so, how did you resolve it
Thanks in advance,
Rich Bernat
Chevron Information Technology Company
Message was edited by: Richard BernatRich, Kirsten:
We worked through this, so I'm posting the fix:
Reply
15.11.2007 14:01:53 Nils Buerckel
Hello Kirsten,
I got a modified R3ldctl from our development (see link below).
I already sent the link to Brad Dillingham as well.
In the file, you will find the new R3ldctl 640/Oracle for AIX 64-bit:
The zip file includes the necessary dboraslib.o as well.
You should unzip the files and put them into the exe directory.
R3ldctlora has to be renamed to R3ldctl.
But make sure you have a backup of the old R3ldctl.
Short answer: get the latest patch for R3ldctl.
Jim -
Donloaded WebLogic Platform 7.0: WebLogic: license has expired!
Hi all,
I have downloaded WebLogic Platform 7.0 from
http://commerce.bea.com/downloads/weblogic_platform.jsp page last week
and installed it after a number of unsuccessful tries due to
unsufficient resources on my PC. When it was finally installed I tried
to run the server, using the workshop, petstore and examples -> start
server, but
all of them give me this error:
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Unable to start WebLogic Server!!
WebLogic: license has expired!
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
The WebLogic Platform 7.0 was downloaded on Wed, 23 Oct 2002. Installed this weekend.
I appreciate any help on this. Thank you.
Best regards,
Maya mailto:[email protected]Test
-
WebLogic Platform Uninstall Problems With SP3 and SP4
I am experiencing a problem (multiple times) WebLogic Platform's uninstall.
I am installing WebLogic Platform 8.1 SP3 from a CD. My machine's OS is Windows 2000 Professional SP4. I'm 99.9% positive that my environment is a supported configuration. I then upgrade to SP4 (once using SmartUpdate and another using the downloaded EXE from the support site, obviously on different runs).
After installing the original (SP3) from CD, I test the uninstall to see if it works. It does, so I cancelled out of the "splash" screen so nothing runs. I restarted my machine. I then upgrade to SP4. I restart the machine again. (As I mentioned before, I've tried this process twice, once with SmartUpdate and most recently with the SP4 EXE install). Without doing anything else, I test the uninstall again, but now, I'm getting the "splash" screen and a warning dialog with the message "D:\bea\weblogic81\uninstall". All methods of uninstall (Start Menu, Console, Silent, Control Panel > Add/Remove, etc...) fail.
In addition, when attempting to use SmartUpdate to downgrade back to SP3, the same things happens, but, in addition, I get another warning dialog with the message "Fail to launch the installer.".
Please help...
Others have experienced this problem since Jul 23, 2003 5:56 AM (based on the thread link below) and I can't seem to find any additional information on it...
http://forums.bea.com/bea/message.jspa?messageID=600005276&tstart=0
Sincerely,
Anthony MangioneI just got the problem. Help needed. Thanks
"J.D. Corbin" <[email protected]> wrote:
>
Arghhh...
When I try to uninstall WebLogic Platform the uninstaller errors out
saying "No
installation of WebLogic Platform found!, aborting"
I figured the install had problems so I tried reinstalling it to another
directory.
The installation went fine. I immediately tried to uninstall it and
got the
same error. Has anyone seen this or have a suggestion as to how to uninstall
the software.
it is driving me nuts.
J.D. -
Platform Migration During EBS upgrade
Hi ,
We are planing to upgrade oracle apps from 11.5.10.2 to R12.1.3.
Currently Both oracle apps(11i) and DB(11gR1) are on IBM-AIX 5.3.
also planing for OS migration from AIX 5.3 to Linux x86-64.
So what would be the better option :
1. Migrate existing apps and db to Linux x86-64, then upgrade Oracle Apps to R12.1.3
OR
2. First Upgrade Oracle Apps to R12.1.3 and then do platform migration i.e AIX to Linux.
Regards,
Kiranuser13605085 wrote:
Hi,
We have EBS 11.5.10.2 on HPUX with 10.2.0.5 database.We want to migrate it to EBS 12.1.3 with 11.2.0.3 database.
We also have 10.1.4.3 SSO with AD.
Our approach is:
First Phase:
1) From source(HPUX) take export(expdp) backup of 10g database.
2) Install 11.2.0.3 database on Target ie,on Linux server.
3) Import database on target 11g database.
4) Link 11g(Linux) database with 11i(HPUX) application
5) Re-Integrate SSO with 11g database.
Second Phase:
1)Pre upgrade steps on 11g database(linux)
2)Install file system of EBS 12.1.1 on linux with upgrade.
3) Upgarde steps
4) Post upgarde steps.
Is it feasible? Please suggest.Please do not post duplicates -- Upgrade EBS 11i(10.2.0.5) on HPUX to EBS R12(11.2.0.3) on linux
Thanks,
Hussein -
I am performing a cross platform migration aix to Linux from release 11.2.0.2 to 11.2.0.4. I am using this doc
Reduce Transportable Tablespace Downtime using Cross Platform Incremental Backup (Doc ID 1389592.1).
I am using the db_file_transer method and I have hit this error
Error:
/home/oracle/local/db_convert/dest_rman/xxttconv_i3q0t1ha_1_1_4.sql execution failed
ERROR IN CONVERSION ORA-19994: Message 19994 not found; product=RDBMS;
facility=ORA
ORA-19600: input file is backup piece
(/oraback/nfclpat1/i2q0t1ha_1_1)
ORA-19601: output file is backup piece
(/oraback/nfclpat1_tmp/xib_i2q0t1ha_1_1_5_28)
CONVERTED BACKUP PIECE/oraback/nfclpat1_tmp/xib_i2q0t1ha_1_1_5_28
PL/SQL procedure successfully completed.
I have searched and do not have anything to go on.
Can anyone who has seen this give me some direction?As per Oracle documentation on given error code, Please see if following action helps.
ORA-19994: cross-platform backup of compressed backups to different endianess is not supported
Cause: A cross-platform backup was requested for a compressed backup to a different endianess from the current platform.
Action: Do not specify a compressed backup or specify the same endian platform. -
Weblogic platform 8.1.4
Where can I find installation for weblogic platform 8.1.4?
All the easy to get WebLogic server version are listed here: http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
When you need other versions, you have to contact support and see if you can get it through those channels. -
Grid Control for a cross-platform migration
Is it possible to use Enterprise Manager Grid Control to execute a cross-platform migration? A co-worker suggested checking this out, but he wasn't sure if it would work or not.
Cross-Platform transportation is a complex process and done by RMAN utility. Don't rely on GridControl, better follow the roadmap in
http://download-uk.oracle.com/docs/cd/B19306_01/backup.102/b14191/dbxptrn.htm#sthref1379
Werner -
Hi ,
I have migrated application from solaris 10 to Redhat 5 Linux.
Afer migration i have compiled forms for custom tops . I need to know is that I need to compile rdf's for custom top or not ?
I can't see any instructions in platform migration notes to compile reports (rdf) after migration .
Pls advise .
EBS - 11.5.10.2
Apps servers Linux 5
Database 11gR2 Aix 6.1We are hosting multiple business suite 11i on server and and it's shared Appltop.
I have installed JDK 1.6 on /do1/java directory and future will be shared by all ebs apps. I have not installed jdk under comm top because it is shared appltop
if I use comm top I will ended up instaling l jdk only on one server. But another issue is If i have to upgrade jdk infuture ,that mean I need to failover all services.
Do you have such env where multiple business running on one server and how you handled jdk setup ?If you do not want to have one JDK installed and shared between the instances, then your option would be installing multiple versions of JDK (one for each instance). These directories can be on any mount point (which is not shared with any of the instances). Each instance will be having its own JDK60_TOP (or JDK_TOP) which denotes the top-level directory where the JDK is to be installed.
Please see (Using J2SE Version 6 with Oracle E-Business Suite 11i [ID 401561.1]) for details.
Thanks,
Hussein
Maybe you are looking for
-
Javascript embedded in button pl/sql event handler not being executed
Javascript calls not working from pl/sql button event handler. What am I missing? Are specific settings needed to execute javascript from pl/sql proceedures? Example: Want to toggle target='_blank' off and on in a button pl/sql event handler to open
-
How do I set a particular view in STUDIO record browser for a particular user?
How do I set a particular view in the Studio record browser for a particular user?
-
Web service Task - Value pair as variable issue
firstly .. I not an .net Developer. We have scenario in which I have a execute SQL task which sends a set of rows with two columns as an variable (object) to a for each loop container.The for each loop container has the web service task and each ti
-
Nokia Suite doesn't detect Nokia E62
I tried to connect my Nokia E62 with the usb to my comp and I can not get it to detect it. It keeps asking for the driver. I installed everything. I am using Motorola SKN6371C usb cable which I was told was suppose to work. Is this the problem?
-
Hi all, My question is mass changing of routing. Is there any transaction, mass changing of routing? Regards MSinan