Weblogic Server 9.2 - Weblogic Admin Console Error

When I open the admin console from the browser on localhost, I get an error "You must have valid license to use WebLogic Portal Framework.
It was working fine until some point and started giving this error.
Any help in resolving this is very much appreciated.
Thanks

Hello User,
You can find the application under below path
Domain_name - Expand "Environment" and Select " Deployments " - here your application will show which are deployed in this domain.
Please refer -http://docs.oracle.com/cd/E13222_01/wls/docs100/intro/console.html
Regards
Laksh

Similar Messages

  • Weblogic Server statistics (other than admin console)

    Hi,
    I am using WLS 5.1 SP 12 on AIX 5.1. I need to figure out how to provide weblogic
    server statistics dynamically (Such as active servlets, response times, session
    stats etc). I know this information is available on the weblogic admin console.
    But due to the complexity of the situation I would like to provide custom JSP
    pages or servlets wherein I can make some API calls (????) to provide the above
    statistics.
    Any help or ideas would be greatly appreciated.
    Thanks,
    Bala

    Hello Nadar,
    Tell me how are you starting server in the cluster, through nodemanager or commnadline.
    Kuldeep

  • Monitoring Weblogic Server statistics (Other than admin console)

              Hi,
              I am using WLS 5.1 SP 12 on AIX 5.1. I need to figure out how to provide weblogic
              server statistics dynamically (Such as active servlets, response times, session
              stats etc). I know this information is available on the weblogic admin console.
              But due to the complexity of the situation I would like to provide custom JSP
              pages or servlets wherein I can make some API calls (????) to provide the above
              statistics.
              Any help or ideas would be greatly appreciated.
              Thanks,
              Bala
              

    Hello Nadar,
    Tell me how are you starting server in the cluster, through nodemanager or commnadline.
    Kuldeep

  • WLS 6.0:  javax.naming.NamingNotFoundException when selecting DataSource in server JNDI tree in Admin Console

    Summary of problem: Get a javax.naming.NamingNotFoundException when selecting the DataSource (see the configuration below) in server JNDI tree in Admin Console
    TheConnection Pool and a corresponding DataSource are configured as follows:
    <JDBCDataSource
    JNDIName="jdbc.PNStoreDB"
    Name="PNStoreDB"
    PoolName="PNStorePool"
    Targets="serverA"
    />
    <JDBCConnectionPool
    CapacityIncrement="2"
    DriverName="weblogic.jdbc.oci.Driver"
    InitialCapacity="2"
    LoginDelaySeconds="1"
    MaxCapacity="10"
    Name="PNStorePool"
    Properties="user=rms;password=rms;server=ora81"
    RefreshMinutes="10"
    Targets="serverA"
    TestTableName="dual"
    URL="jdbc:weblogic:oracle"
    />
    Can't figure out why this is happening. The following is output to the Admin Server command prompt:
    <May 18, 2001 10:20:02 AM EDT> <Error> <HTTP> <[WebAppServletContext(6233000,console)] exception raised on '/console/panel
    javax.naming.NameNotFoundException: Unable to resolve jdbc. Resolved: '' Unresolved:'jdbc' ; remaining name ''
    <<no stack trace available>>
    I tried using a different JNDI name for the DataSource (e.g. just PNStoreDB) with no success.
    The weird thing is that it messes up other resources bound in the JNDI tree. For e.g. I have some EJB's bound under ejb/XXXX that I can click on and view in the Admin Console (JNDI tree) before I add the pool and DataSource. After I add them though, I see the same NameNotFoundException for these as well.
    Thanks in advance for your help.
    [att1.html]

    Are you sure that the connection pool and datasource deployed
    successfully? (Check the logs for an error.)
    Also, I suspect that you want a TxDataSource instead of a
    JDBCDataSource.
    -- Rob
    Weblogic NewsGroups wrote:
    Summary of problem: Get a javax.naming.NamingNotFoundException when
    selecting the DataSource (see the configuration below) in server JNDI
    tree in Admin Console
    TheConnection Pool and a corresponding DataSource are configured as
    follows:
    <JDBCDataSource
    JNDIName="jdbc.PNStoreDB"
    Name="PNStoreDB"
    PoolName="PNStorePool"
    Targets="serverA"
    />
    <JDBCConnectionPool
    CapacityIncrement="2"
    DriverName="weblogic.jdbc.oci.Driver"
    InitialCapacity="2"
    LoginDelaySeconds="1"
    MaxCapacity="10"
    Name="PNStorePool"
    Properties="user=rms;password=rms;server=ora81"
    RefreshMinutes="10"
    Targets="serverA"
    TestTableName="dual"
    URL="jdbc:weblogic:oracle"
    />
    Can't figure out why this is happening. The following is output to
    the Admin Server command prompt:
    <May 18, 2001 10:20:02 AM EDT> <Error> <HTTP>
    <[WebAppServletContext(6233000,console)] exception raised on
    '/console/panel
    javax.naming.NameNotFoundException: Unable to resolve jdbc. Resolved:
    '' Unresolved:'jdbc' ; remaining name ''
    <<no stack trace available>>
    I tried using a different JNDI name for the DataSource (e.g. just
    PNStoreDB) with no success.
    The weird thing is that it messes up other resources bound in the JNDI
    tree. For e.g. I have some EJB's bound under ejb/XXXX that I can
    click on and view in the Admin Console (JNDI tree) before I add the
    pool and DataSource. After I add them though, I see the same
    NameNotFoundException for these as well.
    Thanks in advance for your help.--
    Coming Soon: Building J2EE Applications & BEA WebLogic Server
    by Michael Girdley, Rob Woollen, and Sandra Emerson
    http://learnweblogic.com

  • I depolyed a webapp in oim server problem is oim admin console is not opend

    hi
    i have deployed a webapplication in oim server(jboss) the application is developed using struts. the application is deployed successfully.after server starting the oim admin console is not opend it gives following error .I am using oim 9101 with jboss server
    [ServletException in:/layouts/tjspClassicLayout.jsp] java.lang.NoSuchMethodError: org.apache.struts.util.RequestUtils.message(Ljavax/servlet/jsp/PageContext;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Ljava/lang/String;
    can any one help me.
    Thanks.

    First of all you remove your war or ear file.
    Don't take jar from outside. Take the all jar from OIM machine, used by xlWebApp. You don't need to download any extra jar if it is simple web application based on struts.
    Rebuild with your war or ear with new jar. Than just try it.
    Hope this is clear case of jar confliction.

  • Errors in Weblogic server log for Weblogic Portal

    Hi,
    I apologize if the question has been posted and answered.. I had searched but couldn't find anything in this forum.
    My post is a bit lengthy as I will be providing as much details as possible.. sorry about that.. :)
    I am new to Weblogic server and Weblogic Portal.. in fact I have never worked on portals. I have installed the Weblogic Portal 10.3.2 along with the Weblogic. I have used quickstart to create a domain. There I have configured the following data sources:
    appsGroupSpaceDataSource
    cgDataSource
    cgDataSource-nonXA
    p13nDataSource
    portalDataSource
    portalDataSourceAlwaysXA
    portalDataSourceNeverXA
    My database is oracle 11g. I have created a user and granted the user all the admin roles and priviledges
    The database connection test had worked for all the sources except appsGroupSpaceDataSource where the test query SELECT COUNT(*) FROM SYSTABLES failed as there was no such table in the database.
    I had run the following scripts:
    Drop/Create Groupspace Database Objects (appsGroupSpaceDataSource )
    Drop/Create P13N Database Objects (p13nDataSource)
    Drop/Create Content Database Objects (p13nDataSource)
    Drop/Create Portal Database Objects (p13nDataSource)
    There were no scripts to run for the other data sources.
    After installation whenever I am starting the admin server I am seeing this error in the console:
    <Sep 17, 2010 12:48:05 PM IST> <Error> <JDBC> <BEA-001112> <Test "SELECT COUNT(*) FROM SYSTABLES" set up for pool "appsGroupSpaceDataSource" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Sep 17, 2010 12:48:05 PM IST> <Error> <JDBC> <BEA-001112> <Test "SELECT COUNT(*) FROM SYSTABLES" set up for pool "cgDataSource" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Sep 17, 2010 12:48:06 PM IST> <Error> <JDBC> <BEA-001112> <Test "SELECT COUNT(*) FROM SYSTABLES" set up for pool "cgDataSource-nonXA" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Sep 17, 2010 12:48:06 PM IST> <Error> <JDBC> <BEA-001112> <Test "SELECT COUNT(*) FROM SYSTABLES" set up for pool "p13nDataSource" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Sep 17, 2010 12:48:07 PM IST> <Error> <JDBC> <BEA-001112> <Test "SELECT COUNT(*) FROM SYSTABLES" set up for pool "portalDataSource" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    And the errors are happening in an infinite loop....
    I checked and there is no table created in that name in the database.. and being totally new to weblogic I am not sure where else to check.
    It would be great if some one could help me track the cause and resolve this..
    Thanks a lot for reading the long post.. and double thanks for a reply.. :)
    Edited by: 795423 on Sep 17, 2010 12:17 AM

    I digged in the weblogic installation directory and it seems like the domain configuration wizard messed up the jdbc configs for the data sources.
    The config xml files for the data sources in the /domain root/config/jdbc directory had oracle driver but the test query was for pointbase. I double checked from the database.xml file in the init-info directory and corrected the entry in the datasource config xmls and voila!.. the errors were gone.
    I am not sure if this was the right approach and whether i have solved the issue or simply patched it.. so I am keeping the question open. If any one has any inputs I will be grateful.
    If the mods/admins feel that the thread should be marked as solved I will surely do so.
    Thanks.

  • Weblogic Server not visible in Administration Console

    Hello,
    Forgive me if this is the incorrect location for this question but I could not find a relevant group to post this issue relating to the Administration Console, as it APPEARS.
    We have a three node Weblogic 8.1 SP3 cluster in our environment and the issue we are facing is that one of the three Weblogic Servers (the other two have no issue) is not displaying any information about that server in the admin console (i.e. in "Monitoring"-> active thread queues, connections, performance stats etc. are not displayed). However, the BeaSVC service is running on that server and the server IS serving requests, as confirmed by the weblogic and application logs. It is as if the admin server cannot communicate or thinks the server is in a 'down' state, hence the behavior of not seeing the threads on the server.
    Any suggestions, thoughts or ideas in resolving this matter would be greatly appreciated!
    Many Thanks and Regards,
    -Nader

    Hello Nadar,
    Tell me how are you starting server in the cluster, through nodemanager or commnadline.
    Kuldeep

  • Weblogic Server 10.3.3.0 fatal error

    Hi,
    I am installing weblogic server 10.3.3.0 on IBM AIX 6.1. After i except the default location (/u01/app/oracle/middleware/wlserver_10.3) for Weblogic Server and Oracle Coherence (/u01/app/oracle/middleware/wlserver_10.3) i get this error msg.
    *"A fatal error has occurred. This application will terminate."*
    It's a generic error msg and Metalink doesn't have any notes regarding this. Has anyone seen this issue before?
    Any help would be appreciated.
    Thanks.
    Shawn

    I get the same error msg when i try to install 10.3.2.0. I know that is clearly mentioned in the note for upgrading OEM GC 10g to 11g but i thought this version might have some bugs so i tried to install the most latest one.
    Unfortunately they don't have many notes on Weblogic Server installation and issues.

  • Weblogic Server 10.3.5 - Configuration Wizard Error

    Hi
    I am a newbie to forum threads. Please dont mind if I posted incorrectly.
    When I try to run configuration wizard of weblogic server 10.3.5, I am getting the following error.
    Java Virtual Machine Launcher
    Could not find the main class:
    com.oracle.cie.wizard.WizardController. Program will exit.
    I have't moved any files from installatio directory.
    Please anyone help me out to resolve the issue.
    Thanks in advance.

    How are you trying to run the installer?
    Is it a .exe file OR a .bin file OR a .jar file?
    I am assuming that it is a .jar file.
    The .jar installers would need JAVA to be pre-installed and then use the pre-installed Java to run the installer
    Something like:
    <JAVA_HOME>\bin\java -jar wls1035_generic.jar
    where JAVA_HOME is the location of the Java Installation
    Please review the following documentation for further information:
    http://docs.oracle.com/cd/E21764_01/doc.1111/e14142/guimode.htm#BABHJJEG
    Arun

  • After deploy into weblogic server while running the application-404 Error

    Hi All,
    Created an ADF application and Deployed this application to Weblogic server.
    I am getting the below error After deploy into weblogic server while running the application
    I am able to run this application well in JDeveloper using the IntegratedWebLogicServer.
    The Application is successfully deployed to the Web Logic server.
    While creating the domain, I have extended the Oracle JRF classes.
    Error
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.4.5 404 Not Found
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
    JDeveloper Version : 11.1.1.3.0
    Weblogic Version : 10.3.3.0
    Thanks
    Satish

    On the Deployments look for the Testing tab.. you will see your test link to check your deployment ..
    Some times.. for some reasons( which i dontKnow :( it doesnt identify with m/c name.. repalce it with IP address..and give a try.. if its on local /c u can try 127.0.0.1 /(or local host too)

  • WebLogic Server installation Crashing with a fatal error - SIGSEGV

    Hello WLS Gurus,
    I am in the process of installing Discoverer 11 and I am facing problems with launching wls1036_generic.jar installer.
    I have installed installed Java 7 as follows:
    cd /u02/appldisc/11.1.1/Middleware
    tar -xvzf jdk-7u25-linux-x64.tar.gz
    JAVA_HOME=/u02/appldisc/11.1.1/Middleware/jdk1.7.0_25
    I then excuted:
    $JAVA_HOME/bin/java -Xmx1024m -jar wls1036_generic.jar
    and the installer crashed with this error output:
    # A fatal error has been detected by the Java Runtime Environment:
    #  SIGSEGV (0xb) at pc=0x0000003b09e14d70, pid=28328, tid=139864618293008
    # JRE version: 7.0_25-b15
    # Java VM: Java HotSpot(TM) 64-Bit Server VM (23.25-b01 mixed mode linux-amd64 compressed oops)
    # Problematic frame:
    # C  [ld-linux-x86-64.so.2+0x14d70]
    # Failed to write core dump. Core dumps have been disabled. To enable core dumping, try "ulimit -c unlimited" before starting Java again
    # If you would like to submit a bug report, please visit:
    #   http://bugreport.sun.com/bugreport/crash.jsp
    # The crash happened outside the Java Virtual Machine in native code.
    # See problematic frame for where to report the bug.
    ---------------  T H R E A D  ---------------
    Current thread (0x00007f34d03b9000):  JavaThread "AWT-EventQueue-0" [_thread_in_native, id=28346, stack(0x00007f34c4d3d000,0x00007f34c4e3e000)]
    siginfo:si_signo=SIGSEGV: si_errno=0, si_code=128 (), si_addr=0x0000000000000000
    Registers:
    RAX=0x0000000000000001, RBX=0x00007f34d02bea50, RCX=0x000000009e982203, RDX=0x000000001fabfbff
    RSP=0x00007f34c4e39ab8, RBP=0x00007f34c4e39c00, RSI=0x0000000000000000, RDI=0x0000000000000058
    Can someone help?
    Thanks
    Mathias

    See
    “Generic WebLogic Server Installer generates a Crash immediately after opening GUI on ld-linux-x86-64.so.2 Library (Doc ID 1570688.1)” which states that
    “ This is an issue with AVX support appearing on newer hardware. Default glibc is incompatible with it. This problem happens due to a Red Hat Bug: Segmentation fault in dynamic loader on AVX enabled CPU “
    Solution:
    1. Set the following Environment Property on your active Shell.
      - open a bash terminal and type in:
    $ export LD_BIND_NOW=1
    2. Re-Run the installer as bellow example.
      $JAVA_HOME/bin ./java -jar wls1036_generic.jar
    Mathias

  • Admin console error for 8.1sp2

    Hi, we are using weblogic server 8.1 sp2 and we are getting the following error on our admin console only after a few days of the server restart. Does anyone know why?
    java.lang.NullPointerException
         at weblogic.management.console.helpers.UrlHelper.buildIconList(UrlHelper.java:169)
         at weblogic.management.console.helpers.UrlHelper.getIcon(UrlHelper.java:203)
         at weblogic.management.console.tags.nav.SmartNavNodeTag.getIcon(SmartNavNodeTag.java:147)
         at weblogic.management.console.tags.nav.SmartNavNodeTag.inferStuffFromContext(SmartNavNodeTag.java:132)
         at weblogic.management.console.tags.nav.SmartNavNodeTag.doStartTag(SmartNavNodeTag.java:43)
         at weblogic.management.console.webapp._domain.__nav._jspService(__nav.java:690)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:301)
         at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:150)
         at weblogic.management.console.actions.ForwardAction.perform(ForwardAction.java:35)
         at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:173)
         at weblogic.management.console.actions.internal.ActionServlet.doGet(ActionServlet.java:91)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    ========================
    p.s. error CR100006 was supposed to be fixed in SP2.

    Strange Error... seems due to currpt installation.
    Things to check:
    - Start of instance: please check all processes are down before starting up AdminServer
    - Start of instance: please check messages during startup (also Warnings...)
    - Check listen address, listen IP of instance...are there other (managed) instances?
    - Config files: check the <doman>/config.xml , compare it with backups if you got them

  • Failes to start Managed server using Nodemanager from admin console

    Hi
    I have created the cluster using Weblogic version 9.2 MP3 with
    Machine 1 --> Admin (AS) + Managed server (MS1)
    Machine 2 --> Managed server(MS2)
    All the servers(AS,MS1,MS2) are SSL configured to run in production mode.
    Machine is associated with each managed server and node manager is up and running.
    I have made Host name verification as "None"
    When i start the MS 1 from admin console it comes up in running.However MS2 is not coming in running mode.
    The server logs states that "Could not connect to admin server"
    Cannot decrypt the password ,username and TrustKeyStorePrivatepassphrase.
    Even when i write the clear text password and username in Server_Name/data/nodemanager/boot.properties,then also it throws the same error.
    Node manager is not configured to SSL.
    Any Clue what i am missing????

    Is your Machine #2 shown as "Reachable" in the admin console ( Machines -> Machine2 -> Monitoring )?
    Does your managed server #2 have the same userid and password on its Server -> Configuration -> Server Start page ( UserName & Password fields ) as managed server #1?
    Your boot.properties only needs 2 lines, like:
    password=your plain text password
    username=your plain text username

  • Unable to open Messaging Server 6.2 through admin console 5.2

    my system is
    Sun Java(tm) System Messaging Server 6.2-3.05 (built Nov 23 2005)
    libimta.dll 6.2-3.05 (built 02:22:19, Nov 23 2005)
    Microsoft Windows 2000 version 5.2 (Build 3790)
    i installed Sun Java Enterprise System (directory, admin, messaging) servers on my windows 2003 server, all is working fine except:
    1- unable to open my messaging server through my admin console 5.2.
    when checking the error log file i see
    "[05/Jun/2006:10:51:49] failure ( 2624): for host t.est.hotmail.com trying to GET /msg-config/tasks/operation/cgi_root, cgi_scan_headers reports: the CGI program E:\Sun\Server-Root\bin\msg\admin\bin\cgi_root.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)"
    Any clue?
    2- When creating a new user through the admin console 5.2, and check the mail account checkbox, i don't get the "mail tab" to complete the needed information, and therefore the newly created user is not an active email account as mainly the mailhost attribute has not been created for the account
    Is this related to the problem in point 1?
    NOTE 1: i ran cmm_dssetup.pl before configuring the messaging server and selected schema 1
    NOTE 2: i downloaded the software from sun.com, didn't register it yet as i'm in the testing phase
    Appreciate your help, direction and tips

    Oh, my.....
    1. The Directory Console is not very useful, for anything in Messaging 6. The MTA is configured via editing files, and the mail store is better configured using the configutil utility.
    2. You SHOULD NOT attempt to create users with the Directory Console. They won't work. Use either the command-line tools provided (comm-admin), or use the Delegated Admin tool provided.

  • Admin Console errors in fresh install on Windows 2003 Enterprise.

    I have attempted to install 6.1 SP4 on two different Windows 2003 Enterprise boxes. Neither has W2K3 SP1 on them. The installs proceed using a typical install with no errors reported. All defaults were accepted during the install. I can start the server for the Admin and web server instances. I can hit the default page on the web server instance. When I attempt to launch the admin console, I am prompted to logon, as expected. I enter my credentials and promptly get an HTTP 500 error. I check the logs in C:\Sun\WebServer6.1\https-admserv\logs\errors and find the following line:
    [26/Apr/2005:12:43:26] failure ( 2596): for host 192.168.175.128 trying to GET /https-admserv/bin/index, cgi_scan_headers reports: HTTP4044: the CGI program C:\Sun\WebServer6.1\bin\https\admin\bin\index.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)
    I searched for others reporting similar problems and the closest I could come to an answer was to make sure cookies were enabled on the brower (they are). I get the same error in IE and Firefox, both locally and remotely. After becoming frustrated with one W2K3 server, I decided to try on another. Exactly the same errors.
    Increased loglevels in the server.xml provide no additional logging for this problem. Any pointers to a resolution would be most appreciated as I'm about ready to scrap Sun and move to Apache.
    Thanks,
    Sean

    Yes, there appear to be problems where certain old versions of Netscape and iPlanet products can leave old DLLs lingering in the Windows system32 directory.
    I'd check for the following files in the Windows system32 directory (typically C:\WINNT\system32 or C\WINDOWS\system32):
    libnspr4.dll
    libplc4.dll
    libplds4.dll
    nss3.dll
    nssckbi.dll
    smime3.dll
    ssl3.dll
    nsldap32v50.dll
    nsldappr32v50.dll
    nsldapssl32v50.dll
    If you find any of these files, you can try replacing them with a copy from your Web Server install. Don't forget to backup first.
    Please report back what you find!

Maybe you are looking for

  • How to display results of a report based on current year

    Hi, Please advice me for the following requirement. I have a report which is having sales results, which is having year column also. Report has to be displayed based on the current year. Now it is 2013. I should show current year results only i.e 201

  • Bulk collect & forall error in script

    hi, i am having senerio as below in my code.but i am getting error "too many values for emp1". i know why i m getting error but i need to insert emp column " EMPNO, ENAME" value in emp1 table & emp column " EMPNO, ENAME,sal" value in emp2 table . how

  • Systemd migration issue

    I'm having some serious issues migrating a machine to systemd.  The first error I had was with dbus refusing to start, apparently when I did my upgrade this morning it did not add the dbus user/group. I created the user and then dbus.service starts b

  • Won't start after 10.4.11 update

    I just updated my OS to 10.4.11 and now my computer won't start up. I get to the Mac OS X screen that says OS X is starting up. Then I logon and then the blue screen and that is as far as I can get.

  • Working with canvas. Rectangle won't fill.

    Hey, i'm working with canvas. [code] GraphicsContext g2d; g2d.strokeRect(x, y, w, h); //Rect gets drawn. g2d.setStroke(Color.WHITE); //Strokes are white, works as well. g2d.setFill(Color.BLUE); //Nothing happens. i expect the rectangle to be filled b