WebSAPConsole Run for RF Terminals

Hi
We have installed the webSAPConsole frontend.
We tried to click the  below link :
http://<hostname>/webconsole/run
We are getting the below error
"Dispatcher running, but no server connected!"
I have 3 questions.
1) Please let us know what is wrong.
2) Also let us know what will be the expected output if the above link is successful.
3) We are going to use browser based RF Terminals as well as character based RF Terminals in the warehouse. Will the webSAPConsole work for both types of RF Terminals when we use the webSAPConsole.
Thanks and Regards,
Nagaraj

Hi
I have tried the below links also. But the same error "Dispatcher running, but no server connected!"
http://localhost/sap/isapi_sapcnsl.dll
http://localhost/webconsole/login
Appreciate if some one knows the solution for this problem.
Thanks and Regards,
Nagaraj

Similar Messages

  • After rebooting my Windows Vista 64 bit system, could not access iTunes; after uninstalling I tried reinstalling, but it has been running for more than 24 hrs. Should I cancel installation?

    I had been updating my Windows Vista 64 bit system and as a result of a problem, had to reboot my system. Afterwards, I was no longer able to access iTunes.  I got a message stating that there was a problem with some of the files associated with the application.  A phone rep at Apple's Customer Service provided me with emails linking instructions on completely uninstalling and reinstalling iTunes. I did the uninstall, then checked for lingering iTunes files and couldn't completely remove some, but tried intalling the latest version of iTunes. It has been running for roughly 24 hours.  The status bar is green all the way across, and when I try to cancel, I get the following message: "Are you sure you want to cancel iTunes installation?"  I keep hitting "no," but am staring to wonder if there is a problem with the install.  Should it take this long if I have roughly 134 gigs of music?  I can still see the music in my computer's C drive, so I am worried that there is an error, perhpas because I didn't clear out all the lingering C:\Program Files\Common Files\Apple\ and all the lingering C:\Program Files\iTunes\.  Any thoughts?

    It is not just the HP. I have 3 HP computes and 2 Dell computers. 2 of the HP and 1 Dell suffer the iTunes internet block. Took me a while to figure it out also. But, the one thing that is different on the Dell, is that I can leave iTunes installed and not open it and everything works. As soon as I open it, internet access goes down. BUT secure sites (https:) works fine.

  • I own a MacBook Pro 2.4 ghz non unibody. I turn on my laptop for ten seconds and it freezes. It boots perfectly and runs for ten seconds until everything freezes. Please help!

    I own a MacBook Pro 2.4 ghz non unibody. I turn on my laptop for ten seconds and it freezes. It boots perfectly and runs for ten seconds until everything freezes. Please help!

    See if you can boot into single user mode with Command S.

  • How to check process is running for an application pool on remote server

    Hi,
    I am creating console application which will check whether WCF is up and running. I am thinking of the approach whether w3wp prcoess is running for a particular application pool using some .net API. We have different website with different application pool.
    I know we can use metatdata or any operation inside WCF service to test svcutil or proxy methods but i don't want that. Please help.
    Thanks,
    Dhanaji

    I assume your goal is to simply provide a heartbeat to periodically make sure that a service is running?  There is no real guarantee that a service will be available until you actually try to call it.
    Also please realize that you're going to impact the server's performance by doing this.  IIS is set up to idle out apps that aren't being used. If you periodically poll the service then you will prevent IIS from doing this.  The result will be
    that you'll see a WCF service running even if nobody every uses it.  Is this really what you want?  Hence if you have a lot of WCF services being checked then the server is wasting resources on services that might not be needed. 
    IIS doesn't work like a normal application.  It hosts your WCF service.  You should let IIS handle the lifetime of your service rather than using a heartbeat.  It would take a catastrophic failure for IIS to be unable to start a service when
    a request comes in.  The app pool itself may be running even without the WCF app running. An app pool is a collection of apps so if any app is running then the pool is running.  Checking the pool tells you nothing about the apps in it.
    You mentioned that you don't want to use IIS metadata or a proxy but that is the only 2 options you have.  Personally I would just hit the endpoint with a HttpWebRequest and verify you get a response but the IIS metadata would be a close second.
    Michael Taylor
    http://blogs.msmvps.com/p3net

  • Asset Accounting Reports - Can they be run for any selection of dates

    Folks,
    I have a query - in Asset Accounting, can I run any of the reports (for current fiscal year and closed fiscal years) for any selection of start and end dates? so for example, if I want to run the Asset history sheet for fiscal 2007 (which has been closed in my books), can I run this report for say the month of July 2007 (July 1-31, 2007)?
    I was under the impression that asset reports for closed fiscal years could be run for the entire year ONLY!
    An early response would be appreciated.
    Thx,
    Sameer Aroskar

    Hi Sameer
    I think I did answer this in other forum but anyway here you go again !
    Select Transaction OARP >> Depreciation Lists >> RAGAFA01(Posted Depreciation) - Select this and Execute.
    Select the require company codes and necessary parameters then under Settings select the Depreciation Posting Period e.g. 4 for the required Report date which can be last day of the month from the required previous years. eg 30.04.2007 etc.
    Cheers !
    SA
    PS: award points if you find the answer useful.

  • Is autoconfig required to be run for apps password change

    Is autoconfig required to be run for apps password change -- We are only changing APPS and APPLSYS passwords.
    How to Change Applications Passwords using Applications Schema Password Change Utility (FNDCPASS or AFPASSWD) [ID 437260.1] -- does not mention anything about autoconfig.
    Please clarify.
    Thanks

    It's mentioned in the document twice
    1. For APPLSYSPUB/GUEST as you mentioned
    2. Under "Verify the new password" which cover the apps/applsys passwords
    If you search the doc for "AutoConfig" you will find it there.
    Thanks,
    Hussein

  • I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me kn

    I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me know why it didnt do any conversion. Am i missing something?

    yes, that app engine didnt inserted any rows. So now when i tried to drill down i found that there was no data in the "new demo" database on table UPG_DATACONV. That is the reason for all this.
    When i applied required for upgrade patch in demo it said couple of patch already exists so those update i skipped. Now when i check upd877654 has a step which imports the data in this table. my change assistant told that the update is already available in my demo so i skipped. Now i am not sure what to do.
    I tried reimporting the data and running the analyzer again. But worried that there can be any issues due to this.

  • Report running for long time & performance tuning

    Hi All,
    (1). WebI report is running for long time.so what are the steps i need to check for it ?
    (2). Can you tell me about performance tuning in BO ?
    please help me.....
    Thanks
    Kumar

    (1). WebI report is running for long time.so what are the steps i need to check for it ?
    The first step is to see if the problem lies in the query on the data source or in webi itself. Depending on the data source there are different ways to extract the query and try to run it against the database. Which source does your report uses?
    (2). Can you tell me about performance tuning in BO ?
    I would recommend to start by reading the administrator's guide. There is a section about how to improve performance.
    Regards,
    Stratos

  • Sale Order MRP Run for All Order Line Items

    Greetings...
                     I have One Sales Order , in which i have ten different Line Items .
    Now I have to Run the MRP on basis of Created sales Order so that all Line items wi get consider insingle MRP Run on sales order base MRP Run.
    How to take MRP Run of One Sale Order for all Line Items.???
    In MD50 , we can have sales Order with Item..

    In MD50 you can give only one item at a time.
    Its a standard transaction meant to accomodate changes relevant for MRP after plant level MRP run  related to specific sales order Item.
    so either you need to do it multipal times by changing material or you need to go for MD02.
    Please explain bussiness case in detail why you want to restrict your MRP run for items in a specific sales order.
    Regards

  • Discoverer report running for hours

    Hi,
    One of the custom discoverer report (based on custom SQL) is running for hours.
    When U ran the query for the respective folder, the results were returned in few seconds.
    Hence, data size is not an issue. How can I identify the cause and solve it?
    Thanks,
    Kamath.

    Hello
    If you dont need to run the report urgently then you can always schedule it to run the background till it is finished.
    First log into desktop. Select tools > options > query governor tab. Make sure only radio button named "Never" is ticked. Leave all other options empty / not ticked. Click OK when ur done.
    Then go to File > Manage Workbooks > Scheduling Manager > Schedule.... button then choose either My Computer or Database depending on where your report is stored. Scroll down and find your report. Enter a time and date that you want to start running the report. When you are done click Finish button. Normally the report would run for an hour or till it is complete. But it won't bomb out.
    After 2 hours or even the next morning go to File > Manage workbooks > then look for your report > if it has run successfully then the status column would return something positive like "completed successfully". just double click your report and your are done....
    It works for me if i need to run one of my reports. but that is only if your not in a rush to run your report
    Hope it helps
    Edited by: iandekoker on Jun 11, 2009 12:48 PM
    Edited by: iandekoker on Jun 11, 2009 12:49 PM

  • HELP - ABAP Program Cancelled After Running for 2.5 Hours in Background

    I have an ABAP report program that was being tested in our QA system and it died after running for 2.5 hours with the status of "Cancelled" (which, I assume, means it was terminated by SAP for exceeding some type of governor).
    I ran Code Analyzer and no performance issues were recognized.
    I am running several SELECT statements during program execution.  These are a list of all the SELECT statements used in my program.  Also, I'm using PNPCE to get a list of pernrs for which to pull data at the beginning of the program.
    SELECT *
          INTO CORRESPONDING FIELDS OF TABLE gt_p0167
          FROM pa0167
          WHERE pernr EQ gt_selected_pernrs
            AND bplan IN s_bplan
            AND begda LE pn-endda
            AND endda GE pn-begda.
              SELECT SINGLE fgbdt fasex
                INTO (lv_dob, lv_gender)
                FROM pa0021
                WHERE pernr EQ gt_selected_pernrs
                  AND subty EQ <fs_dtyxx>
                  AND objps EQ <fs_didxx>
                  AND begda LE pn-endda
                  AND endda GE pn-begda.
      SELECT SINGLE agency ansvh
        INTO (p_agency_out, lv_ansvh)
        FROM pa0001
        WHERE pernr EQ p_pernr_in
          AND begda LE pn-endda
          AND endda GE pn-begda.
      SELECT SINGLE vorna nachn gbdat perid gesch
        INTO (gt_control_table-fname, gt_control_table-lname, gt_control_table-dob, gt_control_table-mskssn, gt_control_table-gender)
        FROM pa0002
        WHERE pernr EQ p_pernr_in
          AND begda LE pn-endda
          AND endda GE pn-begda.
      SELECT SINGLE perid
        INTO (lv_ssn)
        FROM pa0106
        WHERE pernr EQ p_pernr_in
          AND subty EQ p_subty_in
          AND objps EQ p_objps_in
          AND begda LE pn-endda
          AND endda GE pn-begda.
      SELECT SINGLE smoke
        INTO (p_smoker_out)
        FROM pa0376
        WHERE pernr = p_pernr_in
          AND begda LE pn-endda
          AND endda GE pn-begda.
      SELECT SINGLE state pstlz zcounty
        INTO (p_state_out, lv_zip, p_county_out)
        FROM pa0006
        WHERE pernr EQ p_pernr_in
          AND begda LE pn-endda
          AND endda GE pn-begda.
      SELECT SINGLE werks btrtl
        INTO (lv_werks, lv_btrtl)
        FROM pa0001
        WHERE pernr EQ p_pernr_in
          AND begda LE pn-endda
          AND endda GE pn-begda.
        SELECT SINGLE region
          INTO (p_region_out)
          FROM zpat_county_code
          WHERE county EQ p_county_in.
          SELECT SINGLE pernr
            INTO lv_pernr
            FROM pa0002
            WHERE perid EQ gt_cobra_table-l_essn.
      SELECT SINGLE eecst ercst
        INTO (lv_eecst, lv_ercst)
        FROM t5ubi
        WHERE barea EQ '01'
          AND bplan EQ lv_bplan
          AND bcost EQ p_bcost_in
          AND cstv1 EQ '0001'
          AND smoke EQ p_smoker_in
          AND begda LE pn-endda
          AND endda GE pn-begda.
        SELECT SINGLE kwert
          INTO lv_kwert
          FROM t511k
          WHERE molga EQ '10'
            AND konst EQ 'ZCOB1'
            AND begda LE pn-endda
            AND endda GE pn-begda.

    The screen shot the tester sent me only says that it was canceled.  However, the log shows the following:
    09/17/2008 16:54:32 Job Started
    09/17/2008 16:54:32 Step 001 started (program ZBNI001...
    09/17/2008 19:22:09 ABAP/4 processor: DATASET_NOT_OPEN
    09/17/2008 19:22:09 Job cancelled
    I'm not sure it was an error, per se, but maybe SAP canceled it because it had been running too long?  The "DATASET_NOT_OPEN" is curious although I've no idea what it means.
    Thanks for your help.

  • How to find what transaction an user was running for a given period

    hi
    could anybody tel me
    how to find what transaction a particular user was running for a given period
    in the past.............

    Hi,
    U need to findout the list of Tcode excuted by SAP user
    1) Tcode: ST03N
    2) Select Expert Mode option
               (there u find  Server Host name & Today)
       If u select Host name u find DAY/WEEK/Month (same thing will in Today option)
    3)Now u need to select the option of DAY,WEEK etc.
    Now u can find in two ways
    1) Transaction profile (Standard / EarlyWatch)
    2) User (user profile)
    If u select the Transaction profile
    Under these u find the option of Aggregation----application/package/tranasation etc.
    I hope these will help u to findout.
    Regards
    ASR

  • HT4623 I have a iPhone 3GS model MC135LL/A with version 6.1.3.  I tried to download the most recent iTunes software but I get " cannot download because version needs to be 10.6.3 or later.",  I hit download and it runs for 10 seconds then quits, saying th

    I want to download itunes 11.0.2 on my PC but I get a "cannot download because you do not have 10.6.3 or later.  I hit download and it runs for about
    ten second then says "Thanks for download" but it is not download.  I have not been able to sync for over 5 months. My iPhone 3GS has 6.1.3 version.

    That's because iTunes 11 requires Snow Leopard or higher.

  • Background job running for a long time - trace is not capturing.

    hi guys,
    My background job runs for more thatn 4 hours.  some times. (normally it completes withing one hour)
    i tried to trace using st12 ....and executed this program. but not got complete trace report of 4 hours.
    what is the best way to trace long running programs like this.
    is there any alternative for this...???
    regards
    girish

    Giri,
    There is no need to trace a program for the full 4 hours. There is usually just one piece of rogue code causing the problem, and it can be identified quite quickly.
    If I were you I would just watch the job run via SM50, to see if it lingers on any database tables. Also check if the memory is filling up - this is the sign of a memory leak.
    You can also try stopping the program (via SM50 debugging) at random points, to see what piece of code it is stuck in.
    The issue should reveal itself fairly quickly.
    Tell us what you find!
    cheers
    Paul

  • Background job is running for long tome in source system (ECC)

    Hi All,
    Background job is running for long tome in source system (ECC) while extracting data to PSA.
    I checked in ECC system SM66,SM50 the job is still running
    in SM37 the job is Active
    There are only maximum 7000 records the extractor is 2LIS_02_ITM but it is taking 11 to 13 hours to load to PSA daily
    I had checked enhancements every thing is correct.
    Please help me on this how can I solve this issue.
    Regards
    Supraja K

    Hi sudhi,
    The difference between Call customer enhancement...  and  Result of customer enhancement:... is very less we can say this as a second.
    The difference is between LUWs confirmed and 1 LUWs -
       and Call customer enhancement -
    Please find the job log details below, and give me the solution to ressolve this
    01:06:43 ***01:06:43 * ztta/roll_extension........... 2000000000                              *                 R8           050
                     R8           048
    01:06:43 1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA     RSQU          036
    06:56:31 Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 5.208 records                  R3           407
    06:56:31 Result of customer enhancement: 5.208 records                                              R3           408
    06:56:31 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 5.208 records                      R3           407
    06:56:31 Result of customer enhancement: 5.208 records                                              R3           408
    06:56:31 PSA=1 USING SMQS SCHEDULER / IF [tRFC=ON] STARTING qRFC ELSE STARTING SAPI                 R3           299
    06:56:31 Synchronous send of data package 1 (0 parallel tasks)                                      R3           410
    06:56:32 tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =                           R3           038
    06:56:32 tRFC: Start = 00.00.0000 00:00:00, End = 00.00.0000 00:00:00                               R3           039
    06:56:32 Synchronized transmission of info IDoc 3 (0 parallel tasks)                                R3           414
    06:56:32 IDOC: Info IDoc 3, IDoc No. 1549822, Duration 00:00:00                                     R3           088
    06:56:32 IDoc: Start = 04.10.2011 06:56:32, End = 04.10.2011 06:56:32                               R3           089
    06:56:32 Altogether, 0 records were filtered out through selection conditions                      RSQU          037
    06:56:32 Synchronized transmission of info IDoc 4 (0 parallel tasks)                                R3           414
    06:56:32 IDOC: Info IDoc 4, IDoc No. 1549823, Duration 00:00:00                                     R3           088
    06:56:32 IDoc: Start = 04.10.2011 06:56:32, End = 04.10.2011 06:56:32                               R3           089
    06:56:32 Job finished                                                                               00           517
    Regards
    Supraja

Maybe you are looking for