Webservice not seen under naigator after transport

Hello Experts
I created a webservice using an EJB.
For this I created 2 DCs 1 is EJB Module and other is a Web module in a single NWDI track.
The Ear file was deployed successfully and the webservice executes perfectly in development system
However when I moved my changes to the test system (transport using Solman ) I cannot locate the web service in the navigator.
I checked the NWA for deployed DCs  in both the systems.
For the EJB DC  when I check the application modules I saw 3 components EJB module, Web Module and the webservice (WEBSERVICE PORTS) in dev system where everything works fine.
However in the test system under NWA for the DC I see only 2 components EJB module and the Web Module under application module. The component of type web service is missing.
Am I missing something in the transports .
What do I need to do to ensure that the web service appears in the WS navigator .
Experts Please help.
Regards
Vikas

Hi,
can you please tell me the version of your engine?
I remember a known issue from the past. The phenomenon was that the webservices were not appearing in the /wsnavigator, and the problem could be resolved using a fix:
#1395019 u2013 Reverse proxy support of Java Web service framework
(http://service.sap.com/sap/support/notes/1395019)
Best Regards,
Ervin

Similar Messages

  • Camera roll not seen in album after updating ios8

    Camera roll not seen in album after updating ios8

    That is intentional. The Camera Roll album is no longer show as a separate album, also My Photo Stream is no longer a separate album.  This Help document explains, where you will see the photos now.
      Get help finding your Photos in iOS 8http://support.apple.com/kb/HT6464
    Have you enabled the "Summarise Photos" option? Then disable it.
    By default, Photos displays a representative subset of your photos when you view by year or by collection.
    To see all your photos, go to Settings > Photos & Camera, then turn off Summarize Photos.
    And did you migrate your photos from iPhoto?  Some photos may still be in the iPhoto Library, that is no longer supported:
    See: Migrating from iPhoto for iOS to Photos on iOS 8

  • [Solved] External USB 3.0 drive not seen under /dev/sd*

    Ok, thought this would be easy but for some reason I cant get arch to see the physical drive. Its a new Seagate 2TB external USB 3.0 drive. I connected it to a windows laptop and it was quickly recognized (ntfs). I then installed ntfs-3g but still cant see it. I then formatted it under windows as ext4, but its still not seen. I tried this with 2 arch PC's, both the same issue. I seen a few other posts and tried a few things like making sure the mod xhci_hcd was running. I have the latest updates on each system. fdisk -l does not show the device at all! I can see and boot to other USB devices fine just not this one, maybe since its USB3.0??
    I noticed here, they talk about maybe USB3 is broke in the new kernels, after 3.10.2 maybe?
    Similar issue: https://bbs.archlinux.org/viewtopic.php?id=126299
    Possible bug: https://bugs.archlinux.org/task/36296
    However, I would think that by now, this would have been fixed as USB3.0 is more common? Other than trying to find a OLD 3.10.2 kernel any other advice?
    dmesg:
    [47653.187708] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
    [48258.419876] r8169 0000:02:00.0 enp2s0: link down
    [48435.623148] usb 6-1: USB disconnect, device number 2
    [48697.691980] usb 6-1: new SuperSpeed USB device number 3 using xhci_hcd
    [48938.171094] usb 6-1: USB disconnect, device number 3
    [48975.057438] r8169 0000:02:00.0 enp2s0: link up
    uname -a
    Linux 3.15.7-1-ARCH #1 SMP PREEMPT Mon Jul 28 20:06:17 CEST 2014 x86_64 GNU/Linux
    lsusb: (Seagate USB)
    Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 007 Device 003: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
    Bus 007 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
    Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 006 Device 004: ID 0bc2:ab20 Seagate RSS LLC
    Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 005 Device 002: ID 05af:8366 Jing-Mold Enterprise Co., Ltd
    Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 013 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 012 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    lsmod:
    Module Size Used by
    uvcvideo 74983 0
    videobuf2_vmalloc 3368 1 uvcvideo
    videobuf2_memops 2239 1 videobuf2_vmalloc
    videobuf2_core 30407 1 uvcvideo
    snd_usb_audio 131860 0
    videodev 123032 2 uvcvideo,videobuf2_core
    snd_usbmidi_lib 21428 1 snd_usb_audio
    snd_rawmidi 20278 1 snd_usbmidi_lib
    media 12611 2 uvcvideo,videodev
    snd_seq_device 5244 1 snd_rawmidi
    mousedev 10912 0
    evdev 11784 8
    mac_hid 3273 0
    kvm_amd 52987 0
    kvm 408583 1 kvm_amd
    microcode 17157 0
    serio_raw 5073 0
    pcspkr 2059 0
    k10temp 3242 0
    snd_hda_codec_realtek 54803 1
    r8169 59191 0
    snd_hda_codec_generic 56366 1 snd_hda_codec_realtek
    mii 4251 1 r8169
    shpchp 25706 0
    snd_hda_codec_hdmi 40396 1
    radeon 1361721 21
    snd_hda_intel 22831 1
    snd_hda_controller 22975 1 snd_hda_intel
    snd_hda_codec 104665 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    ttm 67215 1 radeon
    snd_hwdep 6652 2 snd_usb_audio,snd_hda_codec
    snd_pcm 83207 5 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 19294 1 snd_pcm
    drm_kms_helper 39643 1 radeon
    snd 61276 14 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
    tpm_infineon 7786 0
    tpm_tis 9310 0
    soundcore 5551 2 snd,snd_hda_codec
    tpm 23363 2 tpm_tis,tpm_infineon
    hwmon 3346 2 k10temp,radeon
    i2c_algo_bit 5480 1 radeon
    i2c_piix4 10801 0
    button 4765 0
    processor 25153 0
    vboxvideo 2029 0
    drm 244846 25 ttm,drm_kms_helper,radeon,vboxvideo
    i2c_core 41648 6 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon,videodev
    pci_stub 1381 1
    vboxpci 15059 0
    vboxnetflt 17700 0
    vboxnetadp 18547 0
    vboxdrv 345858 3 vboxnetadp,vboxnetflt,vboxpci
    ext4 494420 3
    crc16 1359 1 ext4
    mbcache 9155 1 ext4
    jbd2 82948 1 ext4
    sd_mod 37554 4
    sr_mod 15026 0
    crc_t10dif 1135 1 sd_mod
    cdrom 35191 1 sr_mod
    crct10dif_common 1436 1 crc_t10dif
    ata_generic 3434 0
    pata_acpi 3579 0
    hid_generic 1217 0
    usbhid 41250 0
    hid 93052 2 hid_generic,usbhid
    atkbd 17006 0
    libps2 4571 1 atkbd
    i8042 13666 1 libps2
    serio 11018 4 serio_raw,atkbd,i8042
    pata_atiixp 5163 0
    ohci_pci 4192 0
    ehci_pci 4152 0
    ohci_hcd 35606 1 ohci_pci
    ehci_hcd 64619 1 ehci_pci
    ahci 24299 3
    libahci 21772 1 ahci
    xhci_hcd 149286 0
    libata 174089 5 ahci,pata_acpi,libahci,ata_generic,pata_atiixp
    usbcore 188509 9 snd_usb_audio,uvcvideo,ohci_hcd,ohci_pci,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
    scsi_mod 138333 3 libata,sd_mod,sr_mod
    usb_common 1712 1 usbcore
    Last edited by banshee28 (2014-08-05 02:27:01)

    R00KIE wrote:
    Make sure you haven't blacklisted the uas driver. If the uas driver does not work well for you, check here [1] how to disable it for a particular drive.
    [1] https://bbs.archlinux.org/viewtopic.php?id=183190
    Awesome, THANKS!! Yes I got it to work following this and specifically Da_Coynul's post:
    I was able to get my external drive working again by telling the usb-storage module to ignore uas for the device. Here is how to do it:
    First, create a file named ignore_uas.conf in the /etc/modprobe.d directory containing the following*:
    options usb-storage quirks=Vendor_ID:Product_ID:u
    *(substitute your actual Vendor_ID and Product_ID obtained from the lsusb -v command).
    Next, regenerate your inital ramdisk:
    # mkinitcpio -p linux
    Finally, reboot your computer.
    Although this is not a solution to broken uas, at least it will let you use your drive as before hmm
    https://bbs.archlinux.org/viewtopic.php … 2#p1428782
    Thanks everyone...Now I can see the drive, and will work on formatting it with XFS...

  • Acrobat XI Pro not listed under applications after installation

    Mac OS: 10.9.1
    Processor: Intel Core i7 2.3GHz
    After installed Acrobat XI Pro, it is displayed in the Creative Cloud Desktop as "Up to date"
    But not listed under "Applications" folder.
    Could not find Acrobat XI Pro anywhere in the computer.
    When you choose "Open with" option for pdf file, not displays Acrobat XI Pro.
    Instead it displays the older version Acrobat Pro 9.
    Someone please help to fix this.

    So, I completed all the steps with no luck. Uninstalled CC and all its components, ran the cleaner, etc. When I reinstalled a fresh version of the Creative Cloud Desktop App, it showed as if Acrobat XI Pro is already installed - see attached screen shot. Any other suggestions?

  • Web Interface builder - Not displaying planning folder after transporting

    I created an web-enabled planning folder and transported it to the quality system.
    In the development system works perfectly (variables, layouts, links, user-exits, etc).
    After transporting it to the quality system when I run this web planning folder the page doesn't load and displays with an empty white web page.
    I tried to re-generate it in the quality system, but I'm having the same problem. I haven't recieved any error message.
    Development system:
    SAP_BW     350     0019     SAPKW35019     Business Information Warehouse
    SEM-BW     400     0012     SAPKGS4012     SEM-BW 400 : Add-On Upgrade Request
    BI_CONT     353     0007     SAPKIBIFP7     Business Intelligence Content
    Quality system:
    SAP_BW     350     0019     SAPKW35019     Business Information Warehouse
    BI_CONT     353     0007     SAPKIBIFP7     Business Intelligence Content
    SEM-BW     400     0012     SAPKGS4012     SEM-BW 400 : Add-On Upgrade Request

    Thanks for your post.
    I tried re-transporting and re-generate it again and I'm still having the same problem.
    Have you heard of a note or something for a similar problem?
    The only thing I recall is that this client was using SEM 3.5 before and upgraded to SEM 4.0 recently.

  • Package not seen under user sys!

    hello;
    I view packages under sys user;
    but not our package seen under sys; I create it with user sys
    any idea
    regrads
    siyavus

    11g R1
    11.1.0.7
    create or replace procedure SYS.mailserver_acl(
    aacl varchar2,
    acomment varchar2,
    aprincipal varchar2,
    aisgrant boolean,
    aprivilege varchar2,
    aserver varchar2,
    aport number)
    is
    begin
    DBMS_NETWORK_ACL_ADMIN.DROP_ACL(aacl);
    dbms_output.put_line(‘ACL dropped…..’);
    exception
    when others then
    dbms_output.put_line(‘Error dropping ACL: ‘||aacl);
    dbms_output.put_line(sqlerrm);
    end;
    begin
    DBMS_NETWORK_ACL_ADMIN.CREATE_ACL(aacl,acomment,aprincipal,aisgrant,aprivilege);
    dbms_output.put_line(‘ACL created…..’);
    exception
    when others then
    dbms_output.put_line(‘Error creating ACL: ‘||aacl);
    dbms_output.put_line(sqlerrm);
    end;
    begin
    DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL(aacl,aserver,aport);
    dbms_output.put_line(‘ACL assigned…..’);
    exception
    when others then
    dbms_output.put_line(‘Error assigning ACL: ‘||aacl);
    dbms_output.put_line(sqlerrm);
    end;
    commit;
    dbms_output.put_line(‘ACL commited…..’);
    end;
    Edited by: sak on Jul 1, 2010 4:36 PM

  • Device not seen in itunes after data transfer

    I bought an original MacBookPro from my daughter & transferred all my data from PB G4 to MBP.
    Everything works just fine, except itunes does not see my ipod touch. I cannot figure out how to get it "recognized" as a device?
    Any suggestions?

    Hello.
    Try the following suggestions below
    1. Perform all Software Updates - Click on Apple logo in top left corner of the OS and choose Software Updates. It will scan the mac and then populate a list of software that needs updating including iTunes if there is any at all.
    2. Connect iPod Touch to another USB Port in the Macbook Pro, If it still does not show up, Disconnect the touch. Reboot the Mac, then reconnect the touch.
    *Link below has extensive troubleshooting steps for iPod Touch not seen in iTunes. Follow one step at a time. Post back if you need further assistance from the community.
    iPod touch not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS2050

  • Changes are not reflecting in QA after transport

    Hi Everyone,
    I am having an issue with the transport in PI. After making the changes in development, i exported the tpz file to Quality. The changes got reflected. Then for testing purpose some changes were done in the Quality IR. Now i again exported the tpz file from dev to QA. But the same changes are not reflecting.
    Has anyone faced such a problem? Need your help experts.

    Hello,
    Check in IR > Environment> cache status overview. Is it in green status??
    Check if the import of .tpz file is successful in quality IR??
    >>Then for testing purpose some changes were done in the Quality IR
    Also, check if there are any conflicts in the IR of quality system??
    -Rahul

  • IPhoto Albums not seen in iTunes after iOS 6 update

    I upgraded a 3rd gen iPad and an iPhone 4 to iOS 6, then updated my Macbook Pro (2.4 ghz quad core i7, 8GB RAM) to 10.8.2 with the requisite iPhoto update.  Now, iTunes will not show my iPad even though wireless sync is enabled, unless the iPad is connected to the laptop via the docking cable.  Both iPhone and iPad error out on synch with an error 1140 if synching photos is enabled.  Under the photo tab, the button to have "selected albums, events and faces" is grayed out.  So I can only select to sync ALL photos or none.  I believe the error 1140 is stemming from my library being too large to sync to the i-device.  In any case, I can no longer choose certain albums that were enabled under iOS 5.  The area below these options in the Photos tab in iTunes also does not show any albums, where it used to do so in a grayed out fashion even if that option was not selected.  Major issue here.  Have tried all the rebuild and repair of iPhoto library.  The kicker is that both the devices I upgraded have the exact same issue, so I'm thinking this is an update/Apple problem, not an issue with my devices or config.

    Ok, all.  I think I found the problem.  In searching for reports of this issue and solutions I found someone that mentioned they had fixed a similar issue with a "free" program called "iPhoto Library Manager."  The app apparently lets you split a library into multiple smaller ones or combine multiple libraries.  Generally it just "manages" your libraries.  I figured I had nothing to lose so I checked it out.  Turns out it costs $19.99 but they do have a free demo. 
    I launched it and it immediately told me that it couldn't display my library and albums due to an issue with the AlbumData.xml file on line 22155.  I read in the documentation of the app under it's "Help" menu that likely causes were a keyword with a "null" character at the end, or a file path being referenced inside the library that had an ampersand or backslash in it.  The person on the board I'd found had had a keyword issue.
    Anyway, I opened the iPhoto library by showing package contents (right click the file to choose this) and loaded up the AlbumData.xml file in TextWrangler, since that displays line numbers.  I found that line 22155 indeed referenced an mp3 in my iTunes library that had an ampersand in it.  Deleted that line.  Then it said line 22156 had an issue so I deleted that, at which point iPhoto Library Manager instantly displayed all my albums.  I checked iTunes and it too now showed my albums and the option to sync only selected albums was no longer grayed out!
    Per the Library Manager's instructions, I saved the AlbumData.xml file I'd modified.  The app said the iPhoto only writes this file out, it doesn't read it.  However, other apps read it to get your album info, hence the issue.  So I had to go into iPhoto and fix the problem, else the next time I exited the app, it would write the file back out improperly.  I noticed in the xml file that where the song was listed it was also referencing one of my albums.  So when I launched iPhoto, I went to that album and checked the slide show settings.  Sure enough, I had set a custom playlist for that album and listed the song I had seen on line 22155 in the AlbumData.xml file.  I removed that song from the settings, and exited iPhoto.  No more issues!  I appear to be all set!
    Now, I'm not clear if I NEEDED to edit the AlbumData.xml file.  Just looking at it showed the error and then I had to fix it in iPhoto.  So you can probably do that.  However, the iPhoto Library Manager software is the only thing I know of that could show WHERE the error was.  Since the free demo works for this purpose, I'd suggest giving it a shot.  This issue is obviously caused by our individual libraries and is not an Apple issue.  Now, the album that had the problem has existed for almost 3 years and I've never had an issue like this arise before so it's anyone's guess as to why it became a problem now.  Fortunately, it's all in the past for me now, though!
    Hope this helps someone.  Good luck!

  • BI Technical Content datasources not found in Quality after transport

    HI All
    I am trying to implement BI technical Content for Admin Cockpit. I was able to implement Technical content Infocubes successfully in development box but when I collected the objects and transported to Quality(collected oblects in seperate requests: info objects in one request, datasources in one request, infocubes, transfer rules and updated rules in one request), I am not able to find the datasources in quality in myself sourcesystem even after repication. but the transport for technical content datasources is successfull. The following are the datasources:
           Comment Entry: Released
           DataSource Replica
               0TCT_DS01                     D17CLNT208
               0TCT_DS02                     D17CLNT208
               0TCT_DS03                     D17CLNT208
               0TCT_DS11                     D17CLNT208
               0TCT_DS12                     D17CLNT208
               0TCT_DS21                     D17CLNT208
               0TCT_DS22                     D17CLNT208
               0TCT_DS23                     D17CLNT208
    can anyone tell me why I am not able to find the datasources in Quality after successfull transport.
    We are on SAP_BW     700   SAPKW70016     SAP NetWeaver BI 7.0.
    thanks

    thanks for your quick responce. I was not able to collect the datasources so I had to manually input them in the transport request. But it worked.
    thanks once again.

  • EHD under snow leopard not seen under maverick

    Hello Apple Community,
    I've recently bought a brand new Macbook pro under Maverick. The External Hard Drive, used on my old Macbook air under snow leopard, is not recognized by Maverick. That's strange because it is seen and can be used on the other laptop, but not on the new one.
    In the finder preferences, the box "show EHD" is checked.
    But when I use the disk utility, it sees only the hard drive on the laptop, not the EHD...
    Does anybody have a solution for this?
    Thank you>

    Keep the old OS around and just kick the tires and test new OS. Apple has a history and habit of breaking support in things like this.
    You can use TimeMachine as one level of backup, and even there there were changes with Lion, I would always recommend foremost backup clones of every volume. And clone (SuperDuper etc) can be stored on something like HP NAS Media Server which also was supporting TimeMachine, iTunes - until Apple made that harder and more their own proprietary format.
    Apple AirPort Time Capsule Support
    Lion Communities
    Cloning as a Backup Strategy
    Rather than "upgrade" I would clone the system, and do a clean install, then allow Setup Assistant to import your files.
    Others who are asking the same question:
    http://www.bing.com/search?q=mac+os+x+lion+WD+My+World+NAS

  • Function module not in Function group after transport

    We have a function group ZPCAD with three function modules in it. I added two  function modules. When they were transported, the function group in the target client did not show the function modules
    I found the program in SE80 Repository info System. when I opened the Module got a message about funtion group being damaged.
    Since then, we have:
    transported the modules again. that did not help
    transported the Function group, that did not help
    Transport all function modules (old and new), that did not help.
    I went to SE37, opened the module and pressed Control, Shift, F5. The function group ZPCAD was opened indicating the module is part of the group. However, the new function modules still were not listed in the group.
    Any advice would be appreciated.
    Scott

    Some time function modules will not be displayed in function group in target systems.
    Goto SE80
    Select the function group from the list box and search for the function group.
    Right click on the functio group and select "Other Functions" and "Rebuild Object List" from the sub menu of "Other Functions".
    After doing all these, function modules will be displayed in function group.
    Regards,
    Siva.

  • IMac OSX 21.5 late 2010, had MTN Lion on it. Prob with thousands of my photos in IPhoto all mixed up and intermingled with thousands of odd images I had not seen before. After trying to erase them, too numerous, I used original disk for disk utility. Disk

    Utility had issues with erasing disk. It took 36 hours and then said it was a failure. I tried repairing and verifying and partitioning. Finally, I used the original disk to install the system. It installed Snow Leopard. I was unable to install the 2nd disk ILife items, so I repurchased those. I thought I was all set but it would not upgrade past 10.6 or something. After it is all set up, I realize there is nothing on the computer. The updates were in download folders and in reading the install logs, it said the install disc was read only and the system was installed from somewhere else and then it was reaped and something about a sandbox and it seemed important that all the Asian languages were added in, even though I unchecked that option. All these odd programs and windows are on there, which I do not use and do not want on there and do not see it on there. So, I tried this several more times, it appears someone is using the Root user. I tried to disable the root user as I do not understand how to set it. Last night, I took the main partition that I put everything on and made me the owner and took over that whole disk. Then the other two were locked, do I ejected them. Then I wanted to erase 4 things - an iDisk an some other trash and the trash is suddenly emptying 989 items, I think were the logs. So, I turned it off. What is going on? I was unable to fix the install disk. The permissions were not repairable on the partition, it was verified as being ok though. Has someone taken over my computer? How can I get rid of them and get it fixed? It has affected my iPad and my iPhone 5. I really need these devices. I am an artist and need to take and post photos of my work. Is this Chinese people doing this and are they nearby?  I did notice they wanted me to sign up for mo ole me. in the logs  it even said, no [email protected]. And no password access at that address.  So, I was also not able to update to Mountain Lion and Icloud again. at one point it looked like I had. i downloaded everything I purchased that was in Icloud to Itunes and it showed the lion in Mail but there was no cloud icon and Mountain Lion said to install, meaning it was not installed. System information confirmed this. oh, and my main disk in disk Utility is named with an unchangeable name that is the serial number of the mac and it says it is an in/out sata media drive. Please, please help me.

    1. If you break your post into paragraphs it is much easier to read.
    2. I have no idea what your post is referring to, and how - if at all - it relates to iPhoto.
    3. It's a good idea to re-read what you've posted, and ask yourself how it might look to someone who doesn't know you and doesn't know what's going on with your machine.

  • IPhone not seen in iTunes after Windows XP reinstall

    Hi
    Can anybody please help me with this, I've tried googling the problem and checking the Apple support info but no luck.
    When I plugged my iphone 3GS in, iTunes doesn't see it. (Windows recognises the device.)
    This worked up until I reinstalled Windows XP (service pack 3) onto a new hard drive, and have installed the latest version of iTunes (10.6.3.25).
    I had copied all my data from my old XP installation onto the new hard drive, including my iTunes directory (iphone sync data - apps, music) , so I just pointed iTunes at the directory and it happily loaded all my apps. Note: Version of iTunes was from 2011 - not sure if it was same, I think it was 10-something.
    Note: iphone is NOT jailbroken
    Steps I have already taken:
    - run through all the steps at support.apple.com/kb/TS1538
    - checked that my cable is ok (iphone charges and is recognised by Windows)
    - authorised my "new" computer.
    - tested my iphone - I went into a mac store and they plugged it in and it was picked up by itunes on their computer
    - disabled my virus protection while testing (AVG)
    - uninstalled and reinstalled iTunes, and rebooted my computer
    - confirmed Apple Mobile Device Support (AMDS) is installed, and restarted it
    Has anybody else seen something like this when reinstalling Windows?

    DEVICE NOT RECOGNISED IN ITUNES
    If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps.

  • Deployed portlet not seen under New channel drop down

    Hi,
    I need to add a new portlet to my portal so user can select it under her content configuration page.
    I have added the new portlet to a user's profile via the portlet admin console.
    But the new portlet channel is not available in user's content configuration page.
    Any Idea ?
    (i'm working on Sun ONE Identity Server 6.1 and Sun ONE Application Server 7.0.0_01 on Solaris 5.8).
    Thanks in advance.
    Best Regards,
    Iris

    Hi,
    This problem occurs when display profile is not updated with portlet provider for some reasons
    Tips :
    1. Please check if Webcontainer instance is up.
    2. login to psconsole -> portals tab -> click on the portal name -> Click Add dn button and search for the dn to which you deployed the portlet -> Add it -> select
    it from the select DN listbox and then download the display profile(dp)
    If the portlet provider which you deployed is not present in the display profile
    , then please undeploy the portlet and try deploying again.
    3) Before running the the portlet deploy, set the logger to FINEST and see if any errors are thrown, basically if should show dp updated and war file deployed.
    ./psadmin set-logger -u amadmin -f ps_password -m pas -O debug.com.sun.portal -L
    FINEST
    tail -f /var/opt/SUNWportal/logs/admin/portal.0.0.log

Maybe you are looking for