Webutil: webutil_file.file_open_dialog seems to hang when cancel is pressed
Hi,
I just used webutil_file.file_open_dialog to select files. I noticed when I press the cancel button, webforms hangs. I have to close my webforms session with the taskmanager, while the cpu has gone to 99%
I encounter the same problem when using webutil_file.file_selection_dialog.
Am I doing something wrong or is this a bug?
what was the code problem that you resolved - I am running into the exact same problem when using the webutil_file.file_open_dialog and I hit cancel it all hangs.
Similar Messages
-
Webutil: webutil_file.file_open_dialog with filter doesn't work as expected
Hi
I just tried to open files by using webutil_file.file_open_dialog. Since I only want to select files with the prefix "brp" (e.g. brp0001.txt, brp0002.lis), I fill the parameter file_filter with the value: brp*.*
This doesn't work. The dialog only shows folders, but not the brp*.* files. I tried with switching to capitals, which doesn't solve anything. With the filter set to *.* the dialog shows all folders and files, so that seems to work ok.
Is anyone aware of this problem and know a solution? I'm using webutil 1.0.2 (beta).K..here's some logging. As far as I can see it's all normal, but it doesn't work (no matter if I use a last | or not). Should be easy to reproduce.
2003-okt-29 09:42:44.547 WUF[setProperty()] Setting property WUF_GFN_DIRNAME to y:\data\
2003-okt-29 09:42:44.567 WUF[setProperty()] Setting property WUF_FILENAME to false
2003-okt-29 09:42:44.567 WUF[setProperty()] Setting property WUF_FILTER to (brp_archief*.*)|brp_archief*.*
2003-okt-29 09:42:44.587 WUF[setProperty()] Setting property WUF_GFN_MESSAGE to bestandsnaam selecteren
2003-okt-29 09:42:44.597 WUF[setProperty()] Setting property WUF_GFN_MULTISELECT to FALSE
2003-okt-29 09:42:44.608 WUF[getProperty()] Getting property WUF_GFN_OPENFILE
2003-okt-29 09:42:45.679 WUF[gfnDialog()] Creating Custom File Filter : Mask=brp_archief*.*, Label=(brp_archief*.*)
2003-okt-29 09:42:45.679 WUF[gfnDialog()] Open File mode
2003-okt-29 09:45:27.203 WUF[getProperty()] Value of WUF_GFN_OPENFILE= -
FYI: New version of Disk Warrior seems to hang when run with Snow Leopard
FYI: It seems that the new version of Disk Warrior hangs when run in Snow Leopard
I have been using DW 4.2 on 10.5.8 and the speed-up was the first thing I noted, too, so it isn't just SL.
Now if it would only 'come up for air' and respond to input to move window (so I can put it where I can see it if needed) I'd like that.
There is a 23 page review of Snow Leopard on Ars. On page 22:
People sometimes ask what, exactly, is wrong with HFS+.
Aside from its obvious lack of the features just listed, HFS+ is limited in many ways by its dated design, which is based on HFS, *a twenty-five year-old file system.*
To give just one example, the centrally located Catalog File, which must be updated for each change to the file system's structure, is a frequent and inevitable source of contention. Modern file systems usually spread their metadata around, both for robustness (multiple copies are often kept in separate locations on the disk) and to allow for better concurrency.
Practically speaking, think about those times when you run Disk Utility on an HFS+ volume and it finds (and hopefully repairs) a bunch of errors. *That's bad, okay?* +*That's something that should not happen*+ with a modern, thoroughly checksummed, always-consistent-on-disk file system unless there are hardware problems (and a ZFS storage pool can actually deal with that as well). And yet it happens all the time with HFS+ disks in Mac OS X when various bits of metadata to get corrupted or become out of date.
Apple gets by year after year, tacking new features onto HFS+ with duct tape and a prayer, but at a certain point there simply has to be a successor—whether it's ZFS, a home-grown Apple file system, or something else entirely. My fingers are crossed for Mac OS X 10.7.
If Disk Utility was reliable in mapping out weak sectors (it is not) and report/log errors. But it doesn't and I trust my data to other file systems when possible. We've come to expect and depend on 3rd party utilities and that Apple First Aid doesn't fix every possible error.
Scanning one drive for errors can take a long time. Maybe it needs to be done, maybe in the background. With 2TB drives it gets worse. Spending hours to scan for errors??? I've set TechTool Pro to concurrently scan anywhere from one to a dozen volumes at once.
An ounce of prevention, as they say, is worth a pound of cure. -
When it hangs, I end up having to "force quit" the application. I can't simply wait it out. No commands seem to respond when it is hanging. I run it on OS X, with all of the most recent software updates. My laptop is a Macbook Pro, most recent iteration.'''bold text'''
When it hangs, I end up having to "force quit" the application. I can't simply wait it out. No commands seem to respond when it is hanging. I run it on OS X, with all of the most recent software updates. My laptop is a Macbook Pro, most recent iteration.'''bold text'''
-
I only noticed today that Firefox works fine until I open gmail, so I'm not 100% sure of that. I usually work with gmail open, so it's hard to separate the two. Problems started before Christmas. Firefox would hang occasionally (every few days). Keyboard worked fine. Then Firefox started to hang once a day or so. Now it hangs several times a day. Every now and then, it crashes (especially if left unattended, the brat), but apparently I never sent a crash report. ( I couldn't get it to crash today -- it would rather hang. Fatal either way.) A week ago, I completely removed Firefox to the best of my ability and reloaded, hoping that would fix any hidden out-of-date or cookie issues. No joy. Keyboard issue started yesterday, so now Firefox is useless. Please save me from having to use Explorer!
P.S. I have Vista.
P.S.S. Oh, google calendar wouldn't load in Firefox, just now - said it's "redirected", and then Firefox crashed. Crash id is below. I did the about:crashes thing and Firefox could not find the report! (Oh Noes!)
This sounds like malware to me, not that I know anything at all. I have current McAffee and it did not detect anything.
Problems started around the same time that I got a new canon pixma MG8120 printer, which loaded a plugin apparently. Might be a coincidence.
If you tell me to remove any plugins, tell me how. I think I tried that and couldn't find a way. Or maybe that was something else...New information and answers to the questions:
1) I've never used dropbox on this machine, so that isn't the case
2) I use Firefox as my browser and don't touch Safari unless it is a site that Firefox balks at. I did all the hardware scans, software scans, resetting prefs, and PRAM as well, almost every day.
New info: I had to do a complete system format and reinstall. It actually seems to have solved the problem and corrected a few things that the recent updates hadn't resolved (the disk sound on sleep-wake didn't work until I installed the update on a new system install). I think the issue had to do with either the recent Java or Airport updates and I haven't installed them this time due to that fear. What forced me to do a complete install was the computer wouldn't hold an internet connection *at all*, even when directly plugged into the router via ethernet. System time got messed up and keychain passwords got hosed too if they related to recent internet/network connections. I wish I had more info to share but that's it. Thanks for the suggestions. I am going to keep this open for now as I am interested in seeing if anything else could explain this issue.
I opened a bug report at the Apple Dev. site (https://bugreport.apple.com/cgi-bin/WebObjects/RadarWeb.woa/110/wo/klAiofleLooe0 XCbERCOUM/5.79.28.0.9) as well. -
ITunes downloads seem to hang when library is on shared USB hard disk
I have a shared USB hard disk on my AirPort Extreme Base Station. I'm able to play music just fine, but when I download a podcast or purchased music from iTunes, the download will start and then hang for a long time. When I quit and tell it to quit downloading in the dialog box, it ignores my choice and won't quit. I'm not even able to force quit iTunes and then can't even shut down my iBook without killing it by holding down the power button.
Is this an issue with transfering the data to the harddrive while airport is also downloading the song? Is there a way to avoid this situation? A setting? Should I be connected to the router directly and not wirelessly?
Please help.You have to mount your drive each time you want to use it. There is a special Airport Disk Utility to do that. Or you create an alias on your desktop (which you can of course only do once you have connected for the first time).
-
the application seems to be : static-cdn.addons.mozilla.net
From the menu bar, select
▹ System Preferences... ▹ Network ▹ Advanced... ▹ DNS
Under DNS Servers you should have one or more numerical addresses, such as “192.168.1.1” or “10.0.0.1”. What are those addresses? -
Firefox 4 seems to hang when I try to type in the address bar...
I have Windows 7, Firefox 4.0, and am trying F-Secure Internet security 2011 trial. My issue is when I am browsing, quite often when I am typing in the address bar or search bar nothing happens. I cannot highlight the text or anything. I have figured I have to wait about 10 seconds for it to clear. Or I can close the browser and reopen and it works.
This is annoying. Is this a Firefox issue or a F-Secure issue? I installed both 4.0 and the F-Secure trail at the same time.Do a malware check with a few malware scan programs.
You need to use all programs because each detects different malware.
http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
http://www.superantispyware.com/ - SuperAntispyware
http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
Mail accessing the internet all the time and hangs when closing or deleting
Why is it every time I look at my DSL modem when Mail is open there is activity and when I close Mail it stops? It's only set to get the mail every 5 min but it's constantly accessing the internet. The other problem is that it seems to hang when closing and sometimes it takes several mins before it will delete an email that I wanted it to delete. Any ideas? I'm running 10.4.4 with a FRESH install, not an upgrade. I only have .Mac mail accounts so there is no other active accounts that Mail has to access to get mail.
This has only been going on since I upgraded to 10.4+ so I tried to reload the 10.4 several times without any change.
Thanks, JasonOkay I used the Activity Monitor to check out mail while it was using the DSL connection. It was using 1.20% CPU and receiving 7 packets/sec. It's memory usage was slowly but steadily climbing until I shut it down. Then all the network activity stopped. As I said before this seems to start after mail has been open but not used for about 20-30 min and doesn't stop until I close mail.
Any ideas. Initially I was worried that there was an exploit in the new mail and someone was using it to access my mac. Is this something worth worrying about or is this a Mail quirk that will be patched later? Anyone else having this issue. I'm not even sure it's a problem but I don't see why Mail would be constantly downloading packets????
Jason -
GarageBand hangs when opening, but will eventually open- what's the problem
Hi,
I just upgraded from GarageBand 2 to GarageBand 3. Previously, everything was on my start-up drive. When I upgraded, I moved all the files I could (loops and the like) to a media drive while keeping everything else on the start-up drive. Now, when I open GB3, it hangs and hangs, beach ball spinning, and the name of the application turns red in Activity Monitor, like it's frozen. But, it does eventually open up, after a minute or two, literally. It seems to hang when it starts loading the instruments used in the track. But it still does open and work fine! Well, not exactly fine, it also takes a lot longer than it used to to load a new instrument when I select a new one. Does anyone know what the issue may be?
Oh, and, I tried opening a file, then saving it as something different, then opening that new file, but it does the same thing.
Thanks!
WilliamThanks for your response, xs4is. I am not on the offending machine at this moment, so I'll have to test your suggestions later this evening. Let me explain a little further what I did that lead up to the issues I'm now experiencing.
I had iLife 05 that came with my computer. I was upgrading to iLife 06. Everything from iLife 05 was on my boot drive- that's how it came and I never changed it. I have the second drive that I use for media files (I edit video- all of those files, my itunes library, etc. is on this drive). Prior to upgrading, I wanted to move everything I could (loops and stuff like that) to the second drive. So, there's a point in the installation right before it actually installs everything- it tells you where it's going to put a bunch of folders, it gives you the path and lets you know you can put them somewhere else if you'd like (ex. "SuchAndSuch" Folder will be installed in /Library/Application Support/Garageband. If you want to, you can choose a different folder. (to paraphrase)). At this point (for each of the folders full of files that it was installing), I followed the path it gave, took the folder that was already there ("SuchAndSuch") and copied it to the second drive, I then deleted that original folder and redirected the installer to the new folder. I even duplicated the folder path, to make it easier for me to understand, so that for the example above, the new path was "SuchAndSuch" Folder will be installed in /MediaDrive/Library/Application Support/Garageband. I am certain I did this part correctly. I created the "Library", "Application Support", & "Garageband" folders-- I only actually moved that last folder and deleted it off the Boot Drive. Anyway, I was pretty sure all this was okay to do because I was only moving the original stuff it was telling me it would be updating or replacing... I hope this makes sense and might help to figure just where or where I went wrong.
I'll have to look later to make sure, but I'm pretty sure there were no other duplicate software instruments in the browser window. There may be dplicates on the drive but not in the window I suppose. And I deleted the old ones off the boot drive.
That's a good idea of creating the alias folder- this could be the root of the problem. But I figured it'd be okay since I was telling the installer to install the stuff on the second drive.
I suspect there may be some small files that I moved to the second drive that really should be on the boot drive- some sort of files that act as a map or something for garageband. Maybe an invisible file? ...I hate those invisible files.
**Oh wait!** I just remembered something, when I was copying those folders (like I was saying above), it did prompt me for my admin name and password! So, wouldn't that mean I was moving something, well, important? Instead of just the loops and stuff?
Yeah, that's probably a key clue, eh?
I'll also try the Garageband index tip and let you know.
Thanks so much for your help!!
William -
Firefox hangs when click link, even to this window, or slow loading a link. WinXP
Firefox often hangs when click link, even to this window. Sometimes closing and opening fireforx fixes it. Very, slow loading some links after a search. Seems to hang when all the google spysites are being contacted.. WinXP
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
Safari hangs when sending forms?
Safari seems to hang when I try to fill in web based forms and send them, its ok on the first attempt
but then seems to hang on part of the form sending process and freezes up the web site I'm visiting. I can navigate to other sites but not the same one again in that session. I have to restart Safari if i want to go to that site again.
Macbookpro latest os and browser. its also doing it with FF?Hi,
From your Safari menu bar click Safari / Preferences then select the Extensions tab. If you have any installed, then turn off, restart Safari. Try a site that uses web based forms.
If it's not Extensions causing this, from the menu bar again, click Safari / Preferences - Autofill.
Click the Edit button next to *Other forms*
Click: Remove All then click Done.
Restart Safari. Try again. If that didn't help, back to the menu bar, click Safari / Reset Safari. Select the top 7 buttons, click Reset. Restart Safari. Try again...
Carolyn -
JDBC Driver.connect seems to hang.
I've been using DriverManager.getConnection to get a connection to MySQL. This has been working fine until I tried to use it from a Threaded part of my application.
It seems to hang when it gets to the DriverManager.getConnection line and never return.
I googled about for hours and came up with that there may be a bug in DriverManager.getConnection which causes a deadlock. So I tried using the connect method directly on the driver but got the exact same problem of it hanging on that line.
I tried running my application (in Netbeans) with the 'Debug File' mode rather than just 'Run File' and everything works perfectly! No problems, which just seemed strange.
If anyone could point me in the right direction I'd be very grateful. I can supply more details if need be :)
Cheers,
stu.It seems to hang when it gets to the
DriverManager.getConnection line and never return.Have you actually verifed this, for example by putting System.out.println statements before and after the getConnection() call? "Seems to..." implies that you're making an assumption which may not be true.
I tried running my application (in Netbeans) with the
'Debug File' mode rather than just 'Run File' and
everything works perfectly! No problems, which just
seemed strange. Doesn't seem too strange actually. That's what "race conditions" and deadlock conditions are about -- different timing in the app will cause different results. -
[solved] Laptop seems to "hang up" when trying to suspend2
I finally got a new notebook, a Thinkpad X60. Today I tried to switch from vanilla- to suspend2-kernel (the one that I had running on my old notebook as well). When trying to "hibernate", I get output on the console until "Doing atomic copy." Then the laptop seems to hang up and does nothing for ages. But when I change to another console and back, the computer turns off... I don't know why.
Starting the system again results in resuming the image - so it seems it has been correctly writen on my swap-device. But the console I come back to on resuming is unusable! I see the output made by 'hibernate' and a prompt. But I don't get an outpu if I type something. Typing blind, something as 'exit' or 'reset' doesn't work either.
What's wrong there?
Last edited by saciel (2007-07-21 23:31:38)Ok, I got it... same fix as for this problem:
http://bbs.archlinux.org/viewtopic.php?pid=250074 -
Web Intelligence Hangs When a Report is Cancelled
Web Intelligence hangs when a report is cancelled. Has anyone else had this problem and how have you fixed it? I have googled it and can find fixes for it on previous versions but can't find it on our current version. We are on SAP BusinessObjects BI Platform 4.1 Support Pack 2 Version: 14.1.2.1121.
Hi,
I still recommend Patch2.x , also the BICS correction is must-have in long term.
You need to save the BEx query in Designer with property "Allow external acess to Query"
Viewer preferences are set in BILaunchPad settings , not CMC
Java version can have impact - but anything in 1.6.0_x range is fine with IE 7 / 8
You also need to make sure your APS server (that contains the DSLBridge service) is running.
You also need to make sure that your user credentials in the BICS logon string have sufficient SAP Authorizations added to your Role, to be able to read the InfoArea nodes as seen in RSA1 in BW.
You also need to have a compatible BW version: 7.01 (EhP1) SP07 and above. (08 / 09 recommended)
Regards,
H
Maybe you are looking for
-
ERROR WHILE RUNNING ODI SCENARIO FROM BAM ALERT
We are using oracle data integrator 11g and have created an ODI Scenario and able to run the scenario from ODI studio client. We have done the configuration for BAM-ODI integration as mentioned in http://docs.oracle.com/cd/E21764_01/integration.1111/
-
I tried setting up my home sharing on itunes but after doing so on both computers with same id and password, it still does not show the same material as in movies on both imacs, what am I doing wrong or how do I fix.
-
My external hard drive that I use as a backup is not being recognizedc by my MAC PRO. Usually I get the icon for the backup, when I attach it to my computer, but that isn't happening. What can I do?
-
I have the newest touch with the latest updates, apple universal dock and composite AV Cable. The set-up is plugged into my LCD TV and works great for playing movies/youtube/BBC iPlayer. However anyone with the same set-up will know that you can only
-
I click on iChat from the Dock and then absoulutly nothing comes up! just at the top of the screen (next to the apple start menu)says ''iChat'' and I click on it (iChat,File.edit etc...)and every thing is grey and I cant click ANYTHING! These are the