Weebly drag and drop editor will not load

I use ipage for my host. When trying to edit my site using weebly drag and drop I am having an issue. I login to ipage, goto control panel, click weebly drag and drop, then click edit site. It brings up a blank page! I have Firefox 3.6.17. I downgraded from the latest version (had the same problem), because Norton plugins were not compatible with the latest version.

Nothing seems to work!!  PSE 8 is supposed to be plug and play without having to mess with anything, get tech support or waste my time.  Why then have I spent 3 evenings trying to make it work?   I called Wal Mart who have a no refund policy on software.  I HAVE HAD IT WITH THIS NONSENSE!!!
Please provide the link to get a refund from ADOBE.

Similar Messages

  • I just installed PSE 8 and the editor will not load

    The organizer seem
    s to work but whin I hit the editor button; n
    othing happens.  What am I doing wrong?

    Nothing seems to work!!  PSE 8 is supposed to be plug and play without having to mess with anything, get tech support or waste my time.  Why then have I spent 3 evenings trying to make it work?   I called Wal Mart who have a no refund policy on software.  I HAVE HAD IT WITH THIS NONSENSE!!!
    Please provide the link to get a refund from ADOBE.

  • Drag and drop feature is not working in Maverick?

    what can i do when the Drag and Drop feature is not working in my I Mac Using Maverick 10.9.4, it will not do it at all i must do copy and paste.
    reading from earlier forums this has been a problem in earlier versions for the mac.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

    Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?  I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
    Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
    This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

    Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

  • UIX drag and drop editor for OAF?

    I posted the following question on the OAF forum, was told it might make more sense to do in the JDeveloper forum:
    I've been told there is a "drag and drop" editor for UIX which can be used with OAF. Is that correct? I am using the following with EBS 11.5.10:
    OA Framework Version 11.5.10.4RUP.
    MDS Version 9.0.5.4.89 (build 555)
    UIX Version 2.2.24
    BC4J Version 9.0.3.13.93
    If there is such an editor, where can I get it, and how do I install it?

    Shay, thanks for the response.
    I have not written any ADF code outside of the course I took a few months ago, but I'm aware of how powerful it is. My question has to do with using the same toolkit or something similar to create and/or modify OAF pages. My customer is using EBS 11.5.10, and as such is using JDeveloper 9.0.3.5. If I can show how to use ADF with EBS, even if it is in R12, I might be able to convince the customer to use ADF. However, any application we develop must work along with the rest of the EBS, so that means we must use the same security mechanism (responsibilities, menus, etc.).
    Currently, to my knowledge at least, there is nothing as simple as your demo which can be done with OAF. There is no drag and drop capability, unless I've missed something.
    Any comments?

  • Elements 13 Editor will not load.

    I've had Elements 13 since November, with no problems until now. Organizer opens as normal, but Editor will not load at all. What do I need to correct this?

    Mac or PC?
    What OS version?

  • Photoshop Elements 12 Editor will not load

    all of a sudden elements 12 editor will not load.  It freezes when it says initializing panels.
    Any suggestions!!

    Start the editor from its .exe or application file or from the button in the organizer, while holding ctrl+alt+shift (command+option+shift on a mac).
    Keep the keys down till you see a window asking if you want to delete the settings file. You do.

  • Just updated Safari in 10.7.5 and now it will not load (beach ball)

    I am running 10.7.5, and I do not want to update to 10.9 at the moment. I updated Safari, and now it will not load. It gets stuck at a white screen with the beach ball of death. Any ideas? Thanks.

    I uninstalled Glims. That solved the problem.

  • Hi my iPod touch gen 4 has stopped working properly and App Store will not load but Internet will, also you tube also won't load. Any ideas?

    Hi my iPod touch gen 4 has stopped working properly and App Store will not load but Internet will, also you tube also won't load. Any ideas? I should probaly also add that I have also recently tried to download a screen recorder from safari and a message keeps popping up and saying that it can't verify server, even for this website

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    Files cannot be downloaded from Safari on an iPod touch.

  • Drag and drop podcasts do not show up under "podcasts" heading

    When I manually drag and drop a downloaded podcast into my Ipod, these do not show up in ITunes under the "podcasts" category. When I look at the Ipod display, it show the podcast is actually on the device, even though ITunes does not show it. I can not browse through the ITunes listings to find the missing podcasts since the only other category available in the left-hand menu is "music" and this does not show podcast as an option for genre. How can I display and delete podcasts after I have listened to them? Hows can I see what is actually on my Ipod using ITunes.

    Only episodes downloaded with iTunes will go into podcast section even if genre is set to podcast. Doesn't matter if it is singles episode download or using subscription.
    Episodes downloaded with browser will go into music section. Depending on tag info they can then be found using genre, artist, or album search.
    Somebody, awhile ago, found the difference in files using a hex editor. They were successful in moving the direct download file to the podcast section.

  • In Oats Drag and Drop Api is not working in Firefox Browser

    To Write OAts test for Drag and Drop functionality
    we are using "dragTo" API.
    Ex :
    web.image("/web:window[@index='0' or @title='Fusion Applications']/web:document[@index='0' or @name='aqizmnwha_1']/web:img[@absoluteLocator='" + sourceIndex + "']")
                     .dragTo("/web:window[@index='0' or @title='Fusion Applications']/web:document[@index='0' or @name='aqizmnwha_1']/web:img[@absoluteLocator='" + targetIndex + "']");
    This Api is not working in firfox.(works in IE browser).
    Is there any other way we can test DnD functionality in firefox and IE?
    Thanks in Advance!
    Thanks,
    Siddi

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • GNOME 3 : "drag-and-drop" + "Alt-Tab" not working

    Hello,
    In GNOME 3.2.1 with Mutter 3.2.1 (current ones in Arch), it is supossedly fixed the following "bug":
    Mutter 3.2.1 changelog:
    * Allow keyboard window switching (alt-Tab) during drag-and-drop [Matthias, #660457]
    But I can't make it working.
    As test, I open a folder (maximized) and vlc (background). I drag a movie file with left click mouse and pressing Alt-Tab makes nothing.
    In fact, when I press Alt the file icon changes to a question mark "?"...
    Has anyone been able to make it work?
    Thanks in advance,
      Franz
    Last edited by franzrogar (2011-11-01 08:48:40)

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • The drag and drop feature is not working on the touchpad

    My drag and drop stopped working on my macbook pro, the model number is the
    MB 13.3/2.4/2X1GB/250/SD/BL-KB-USA
    MB467LL/A
    The systems is runnng Snow Leapard, I have in the preferences, drag lock disabled, dragging enabled, the operating system is 10.6.8.
    I also reloaded the system disk, same issue.
    Any help would be appreciated.
    Thanks,
    Tom

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Drag and drop samples for instant load and playback. MIDI SAMPLE PLAYBACK

    HI, i am looking for a application where I can drag samples in it for instant midi playback.
    I know logic has a way to do this through the ESX24, but the problem is there are multiple steps and it can takes around 1-3 minutes to finished the task.
    I am looking for something on a more "spend less time setting up" event. Basically an application where I can manual drag and drop for quick load. I would like to use the Roland Hand-sonic as my midi play back

    sonther, I've only tried the audiofinder out a little bit running in demo mode. I liked it ok, except that I thought I'd go and let it index my audio files, which took a very long time (fair enough, I have many).. but I didn't really see any great advantage from having done so. also I found that for some files it would give me a waveform overview, others it would say preview not available or something, even though they were the same format. maybe that was a demo limitation thing.
    but it did get me thinking about how much I'd like to work better with my audio in the finder.. I've hated the audio import and audio window management in logic for a while so I'm always looking for better ways to do things.
    ...then, I saw this:
    http://www.audioease.com/Pages/Soundabout/SoundaboutMain.html
    now, I just checked and the website is currently updating this page. but go back later until you see it back up. there was a QT demo video (complete with that generic dutch-english accent..), showing what looks to me like exactly the enhancements I've been looking for, to work much better with audio in the mac finder. and of course it's got a few things that I didn't even know I was looking for, but now I know.
    I'm hoping it gets released soon.. and I'm also hoping that it's not going to mess around with leopard when that comes out, because I have a feeling I am going to get very used to using this thing.
    even for things outside logic, like quickly rounding up my work in progress files to instantly convert to mp3 and AAC right there in the finder, and then automatically have it all placed in an email ready to go, it's going to make life a whole lot easier. especially when you've been working hard on a deadline project, the last thing you feel like doing is messing around keeping your work in progress files in order, prepping mp3s or whatever and emailing, after you've finished a long day at logic.. seriously, check out the video when it's back up..
    et dis-moi sonther, ça se fait comment que tu parles français? t es pô un ptit québecois par hasard?....

  • Drag and drop into playlist not working + changing of timezone

    Hey All
    Ive searched and cant find an answer to this anywhere
    My PC crashed pretty hardcore like (unable to load vista to deauthorize account before formatting PC) so a format ensued, once i formatted i reinstalled itunes and reauthorized my account for my ipod touch did the whole back transfer and delete and resync of my ipod so now i have to put all my music back onto the ipod touch (well not all my music just the stuff i want to listen too)
    So i went and made a new blank playlist (not a smart list) and proceeded to fill ... when i came accross my problem i cant drag music from the library to my new fresh (definitely not a smart playlist) Playlist
    ive checked the "manually manage box" in the ipod summary screen but even when the ipod isnt plugged in i cant drag and drop. i can right click and add to playlist fine ... just not drag and drop
    also when i plug my ipod in it sets my timezone to london and changes my time .... rather annoying considering i use my ipod as an alarm clock
    any assistance is greatly appreciated
    Thanks Rey

    You're Very Welcome Nick!
    I'm glad the fix was that simple!
    Also, I notice that you have marked your question as answered, but have not utilized the Helpful or Solved options. That may be intentional, but, if you are not aware of the benefits, of using that function, here is some information.
    When you mark the appropriate posts as Helpful (5 pts) 2 available, or Solved (10 pts) 1 available, you are Thanking the contributors, by awarding them points.
    In threads with multiple replies, it also alerts other readers, to which answers may have been helpful, or solved the issue.
    This info, and more, can be viewed by clicking on
    ? Help & Terms of Use, located under your login name, on all "Discussions" pages.
    Specifically What are question answers?.
    ali b

Maybe you are looking for

  • How can i update more than one table at a time?

    i would like to update more than one table at a time. In Java Studio creator2 how can i do table updation?

  • Photo from iPhoto gets cropped when inserted into iMovie

    My old video (miniDV camcorder, DV) is 4:3 and lower resolution than my photos (16:9, good digicam). I inserted a vertical photo into a video project, and the photo gets truncated on playback. I expected it to be scaled to fit when shown on the scree

  • Display looks goofy after installing Mavericks

    Hi folks, After I installed Mavs on my 2009 Mac Pro tower, the display won't display correctly. I should have a 1280 x 1024 option, but it isn't there any more! So, I can now 'scale' at another resolution, but it makes fonts and pix look goofy. Any i

  • Binary image

    I want to convert a image to a binary image(only black& white) I use this code to convert a color image to a grayscale image: public static BufferedImage applyGrayscaleFilter(BufferedImage aImage) BufferedImage tmpBufImage = aImage; try for (int i =

  • Cant get rid of coupon drop down

    How do I get rid of this annoying software. I tried resetting Safari but its still there