Weird and serious LR bug: jpg + nef becomes jpg + jpeg!

ok, this sounds very strange, but I'm experiencing some serrious issues with LR 1.1. I've done some shootings with raw (nef) + jpg with my Nikon D200 camera.
I import to LR using the default setting where LR keeps track of both files, but only displays the raw-file (but showing the text: "nef + jpeg" when hovering a thumbnail).
So far so good.
But lately I've experienced some bad beaviour.
When browsing some of these folders with nef + jpegs in LR, suddenly LR starts to work threw the thumbnails, regenerating them a lot brighter (I'm NOT talking about the initial small "adjustment" LR does to raw files).
And when hovering the affected images, it displays "jpg + jpeg" (!) instead of the usual "nef + jpg" message!
I'm I the first experiencing this??
I tried to manually synchronize the affected folder to get it back to the right condition. It didn't work succesfully (reimporting the files, but not grouping jpeg and raw together, and affecting the jpeg files with wrong adjustments). Only fix seemes to be: remove all the images from the folder in LR, reimport the images, and do all keywording, adjustments and final preparations for the images ALL over again.
None of the files seemes to be damaged or corrupt. I've not changed any folder or file outside of lightroom.
Because I have to reimport all images when this happens (experienced it with two or three folders now), I loose all my adjustments and work with the raw-files. Thats totally unacceptable, and I hope there is a sollution to this.
thanks for any help!
regards
Carl
Using Vista, 2GB ram, Intel 2,4ghz C2D

I too have come across this serious bug, which also occurs in LR 1.2 (see http://www.adobeforums.com/webx/.3c051b42 ). I reported it on Adobe's bug reporting web page. It occurs when a folder is moved within LR and is difficult to recover from (the raw filenames in the lrcat are changed to .jpg). I have not had a problem moving selected photographs from one folder to another - just moveing an entire folder in the folder panel. My advice is not to move any folder within LR, move folders outside first, then go back to LR where the moved folder will be shown as missing (in red). Right click on it and use locate missing folder to restore the moved folder.
Tony

Similar Messages

  • BUG:  With same name jpg and RAW in same folder

    OK, we have established that you can't import same filenames RAW/jpg into the same folder, but you can drag them in later. This is useful for stacking.
    Bugs that occur when jpg and RAW with same name together in same folder. (have not tested for psd, tif etc.
    1. If you rename the jpg, the RAW also gets renamed
    2. You cannot move the jpg properly within the folder in grid mode.
    Most of my landscape shots need to go to photoshop. I developed a nice workflow which integrates PS quite well with LR...see post here:
    http://www.adobeforums.com/cgi-bin/webx/.3bc34679/5
    I created the workflow so that I could retain same name RAW/jpg stacks in the same folder. I have altered the workflow slightly so the jpg gets autorenamed with filename_# ... see the link above.
    Kev

    It's the same design issue Kevin. Sidecar files get renamed automatically and these are treated as sidecars.

  • Nikon D5100 and D700, CS5, ACR 6.4.1: not enough memory when I convert many nef in jpg

    The discution was ( and is) also here: http://forums.adobe.com/message/3781380#3781380

    Using ACR from PS3 or PS4, no problems. Using ACR 6.4.1. and making a batch convert, from nef  to jpg ( or to other formats) I receive "not enough memory" sometimes, and all the times when I select reducing noise and lens corrections. It happen also when I try to transform only one nef to jpg.
    I have win 7, i7, memory in triple channel, the system on a SSD, the scratch disk of win on another free SSD and the scratch disk for PS ans ACR on another SSD. I have tryed all imaginable settings, and no hope to use the ACR. Old ACR are OK, only this 6.4.1 have a big problem on my system.

  • Exports both JPG and a copy of the NEF

    I was playing with some settings and where before LR 5.6 exported only JPG files, it now exports both JPG and a copy of the NEF file. How do I just export the JPG and not both? What do I shut off?

    I was doing some tests and, being lazy, rather than import a file from a flash card, I imported from a subfolder in my work folder where I keep the RAW files from a shoot named “RAW”. Usually, the files are imported into this “RAW folder from the flash cards. Apparently, if the NEF file you are importing is already in the folder you are saving to (“RAW”), LR saves to the root directory (“work” folder) which is where I normally export my edited LR files. There needs to be a dialog box come up that says your are saving to the same folder or something to that effect. Goes to show – never try to work late at night when you are tired.
    Long story short, LR was NOT exporting JPG or TIFF files along with the NEF file. The NEF file was copied to the work folder on import. Goes to show – never try to work late at night when you are tired.

  • How can I convert a large batch of NEFs to JPGs in one step or action?

    How can I convert a large batch of NEFs to JPGs in one step or action?  I'm very new to Lightroom and know almost nothing about it, so I need to know step-by-step.  I've seen online advise about exporting but I don't know what that means - export from where to where?  Can anyone help me?  Thanks!

    I suggest you take a little time to watch some tutorials. If you are that new to Lightroom that you don't understand what export means then it would probably be a good idea for you to get some other information as well. If you don't I think you'll find Lightroom can be very confusing. You haven't indicated what version of Lightroom you are using. The link I'm providing you is a series of getting started videos for Lightroom 5. And just about everything in this series will apply to other versions. You will note that there is one video devoted exclusively to exporting images. But I think you really need to watch the whole series.
    Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV

  • RAW file tuning brick and Nikon D2Hs - bug or omission ?

    Hi everyone,
    I use a Nikon D200 and a D2Hs. With NEFs from the D200 in Aperture 3.0.2, I have access to the new RAW file tuning brick (with the De-noise slider).
    With NEFs from my D2Hs, the older v2 RAW file brick appears (with a checkbox named 'Auto Noise Compensation').
    Is this a bug in Ap3, or have Apple updated the RAW engine only for certain cameras ? Could anyone else with a D2Hs please confirm my observations ?
    Thanks
    V

    It is not a bug - seems older cameras got left out of the "enhancements"/fixes to some of the RAW processing - Ps. Of all the "off" Nikon NEF files the D2H is one of the most off compared to NX2 - sheeeesh you think they could have fixed it.
    No biggy I have had my own "presets" since V1 for the D2H.
    RB
    [http://photo.rwboyer.com>

  • NEF und JPG stapeln

    Ich möchte in Elements 10 JPG- und NEF-Dateien, die von meiner Kamer Nikon D90 gleichzeitig von einem Motiv erstellt und in der Kamera bzw. SD-Karte abgelegt werden beim Importieren stapeln lassen.
    Auch hätte ich gerne, dass das JPG immer als erstes Bild des Stapels angezeigt wird.
    Elements fragt nach dem manuellen Starten des Findens gleicher oder ähnlicher Bilder danach, dass es den Index neu erstellen will, das Bejahren hilft allerdings auch nicht.
    Diverse Suchen in Foren haben mich bisher nicht zu neuen Erkenntnissen gebracht. Danke für eure Bemühungen und Tipps.

    loaded a card that had images in JPG and NEF the JPG are in the LR folder but are not visible in LR

  • Weird and aggravating user-burned DVD problem.

    Hi,
    I'm experiencing a very weird and annoying problem with my self-written data DVDs.
    Basically, when I wrote a couple of data-DVDs today, I cannot seem to copy the files from these DVDs on a Mac via the normal way anymore. Basically, when I mount my DVD I see all my files just fine, but when I wish to copy one to my computer I get the forbidden-cursor (the one with the black arrow and a white stopsign). Now the weird part is that if I select multiple files I can actually copy them to the hard-drive, but with a strange caveat; namely the file that I selected last will not be copied over.
    This was the first time my self-written DVDs showed this behaviour, so to check I dug out an older DVD which I knew worked perfectly a year ago. But lo and behold, it now also displays this behaviour. What's more, it seems suddenly all three Macs in this house decided do treat my DVDs (old and new) in this weird way. The lone Windows pc downstairs otoh actually did just fine and allowed me to copy single files from the disc with no problem.
    But that's not all. If I insert such a DVD and later on insert a self-written CD, this CD suddenly shows the same behaviour. Only after relaunching the finder will this CD work correctly again (sadly, this doesn't help with the DVDs).
    To write my DVDs I use an external LaCie d2 16x DVD+/-RW (completely up to date with respect to its firmware) with Toast Titanium 7.0.1 on an eMac G4 1ghz running Tiger 10.4.7 .
    I use either DVD+R or -R (both show this problem) and write them using Toast's Mac & PC data disk option. Between the three Macs here at home the only constant factors are the Apple-supplied system updates, leading me to believe there is either an undocumented burning bug in Toast or there is a problem in Tiger 10.4.7 .
    A google-search did not bring up anything, neither a confirmation nor a solution for this problem. My question now is; has anyone here ever experienced this problem and found a solution (or have at least an idea what the underlying problem could be)?
    Thanks for any and all replies,
    Tim
    P.S.: I figured that perhaps there was a sort of permission problem on the mount volumes, so I ran the fix permissions routine but to no avail sadly.
    eMac G4 (1 Ghz) ATI-graphics, combo-drive, 512 Mb RAM, 160 GB HDD   Mac OS X (10.4.7)  

    Update:
    It seems that older DVDs do in fact still work ok when one relaunches the finder, just like I mentioned for cd's in my above post. So seemingly the DVDs written today somehow seem to 'corrupt' the Finder with their behaviour.
    In fact the last 'good' backup DVD I wrote was in february of this year, so whatever is causing this must have happened between then and now. This gives me the impression that there must be an incompatibility between 10.4.7 and either Toast 7.0.1 or with the firmware on my DVD±RW drive.
    Any insight is greatly appreciated.
    Sincerely,
    Tim

  • When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the test and change the font, it does not change it properly?

    When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the text and change the font, it does not change it properly? This is making it impossible to amend.

    Hi Janedance1,
    If the PDF that you converted already has searchable text, please try disabling OCR as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel. (If the PDF was created from a scanned document and doesn't already have searchable text, disabling OCR isn't a great option, as the text won't be searchable/editable in the converted Word doc.)
    Please let us know how it goes.
    Best,
    Sara

  • I am using a Mac and when I save my files as a jpeg, the files become much smaller, and consequently darker and blurrier.  What can I do to fix this?

    I am using a Mac and when I save my files as a jpeg, the files become much smaller, and consequently darker and blurrier.  What can I do to fix this?  I have tried to figure out how to chat with someone at Adobe, but they certainly don't make it easy to do.  At the moment, this program is useless to me.  Very depressing....

    Hello,
    I would like to inform you that not all the browsers and online PDF readers support copying text from a PDF. If you have opened the PDF online, please download PDF file to your computer and then open the file in Adobe Reader.
    Please share a screenshot if the issue still persists.
    Regards,
    Nakul

  • Preview (and also Quicklook) no longer show certain JPGs

    i run latest 10.6.8 software.
    It was always that preview and later also quicklook showed all the jpgs i created with Photoshop in CMYK mode with included color profile without any problems.
    Now both dont show them anymore.
    When trying, this error shows up in the logs: "Malformed Image: too many APP2 markers"
    The files themselfes seem to be okay because otherwise they can be opened properly.
    aha -> firefox shows them but safari also refuses.
    I tried on a friends macbook with also 10.6.8. Same problem there.

    Hi manxgeorge,
    From what you describe, it sounds like notifications may have changed some how in your Settings for these apps. You can check that here:
    About Notifications on iPhone, iPad, and iPod touch
    To see which apps provide notifications and change notification settings, go to Settings > Notifications, and tap the app name.
    You can also check to see if they were removed from the Today Notifications with here:
    Notification Center - iPhone
    Set Today options. To choose what information appears, tap the Edit key at the end of your information on the Today tab. Tap + or — to add or remove information. To arrange the order of your information, touch , then drag it to a new position.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

    I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

    Each camera needs a specific camera raw version (ACR).  And each ACR is tied to a specific version of PS.  See this list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

  • ITunes 10.4 and Windows 7 bug thread

    I thought I would start an entire thread devoted to iTunes 10.4 and Windows 7 bugs since there are MANY people reporting various issues and may not know about all of them. Hopefully this will combine a list of all bugs for reference and help others. So far, most of this effects Windows 7 64 bit, but some are reporting issues under 32 bit too.
    I have spoken with both Apple Care and a higher level tech at iTunes support. The iTunes support tech said they were "looking into all reported bugs and are aware of issues with version 10.4, especially under Windows 7. They encourage others to report their bugs to iTunes support so they can work on this and find all the issues.
    KNOWN BUGS:
    Album Art copy/paste broken - A bug that causes copy/pase from clipboard where album art is not displayed in the info tab as before. Some have reported success by dragging the image file over to it vs copy/paste method but it is still very much spotty and a known bug.
    iTunes store not working - Some have been effected with the iTunes store not working properly for them. Personally I don't have a problem but this has been for some.
    "Purchases" link not working in iTunes - When you click on "Purchases" link on the right column, all your purchases are missing and do not show up. This includes, music, movies, apps, etc. This is also a known bug and one that I have personally. Works fine in iTunes 10.3 for Windows 7 64bit and also works fine under both Snow Leopard and Lion OS.
    Sync issues - Some have reported syncing issues since upgrading to 10.4 iTunes on Windows 7. This is a bit spotty as well as I have no trouble but there are others that have reported issues.
    Solutions:
    For now, the only way to fix this is to use iTunes 10.4 under Snow Leopard or Lion OS. Also, you can uninstall (not repair) 10.4 and install 10.3 again which should work.

    You are correct and I wish that I had known this before spending 4 days and a lot of trouble going over this with both Apple Care and iTunes support. They had me jumping through hoops and didn't know anything until it was finally escalated. Only then did I get a vague response like I mentioned in the first post. It's troubling to me how a simple response from anyone there could've just said we know about this and they are bugs in 10.4 causing this.
    There are other issues too as you point out with the syncing and crashing. Anyway, hopefully others will find information here more useful than calling Apple for help. Not much we can do now except roll back to 10.3 for those that kept it and hope also they can updated Apple Application Support component.

  • My FaceTime seemed not working and keep  telling me The document "IMG_3054.JPG" could not be opened. FaceTime cannot open files in the "JPEG image" format.  I clicked OK but it pop-up again.  So that I can't turn off my computer at all.

    When I tried to restart my computer, FaceTime will pop-up and a warning message The document “IMG_3054.JPG” could not be opened. FaceTime cannot open files in the “JPEG image” format.  I tried to clike OK but this worning message keeping pop-up and I can not quit FaceTime.  So that I can't turnoff or restart my computer.
    Can someone help?

    The next time that happens, try this keyboard shortcut.
    Command + Option + Esc
    That way you can "force quit" the Facetime App.

  • HT5252 I tried to change my metadata date and got this   Aperture was not able to adjust the date and time of the original file "01769_p_h13ajyrm4bm0944.jpg" because it is locked or you do not have permission to modify it.

    I tried to change the metadata date.  It changed the date on my photo, but when I checked the box that said "also change my original file", it gave me this error message.
    Unable to change original file.  Aperture was not able to adjust the date and time of the original file “01769_p_h13ajyrm4bm0944.jpg” because it is locked or you do not have permission to modify it.
    Wassup?

    What is your Aperture version? The older versions of Aperture 3 had a problem to apply Metadata changes to the original file.
    If you are using the current version Aperture 3.4.5, try to repair the permissions on your Aperture library, if you have not already done so:
    Launch Aperture with the key combination ⌥⌘ held down and select "Repair Permissions" from the First Aid PAnel, that will appear.
    If that does not help, post back with more information on your original files - are the referenced or managed? Where is your Aperture library located? Since when do you have this problem? And what did you do directly before noticed the problem for the first time?
    Regards
    Léonie

Maybe you are looking for