Weird chart shifting problem?

I'm having a problem that's easy to reproduce. Create a pie chart on a blank slide (the default data will work fine). In the inspector move the Labels so they are outside of the pie chart -- around the perimeter. Now set the chart so the build is by slice from first to last (any build in effect will do -- appear is fastest).
Play through the builds.
You'll notice that when it gets to the pie slices on the left side the entire pie shifts positions. How dramatic this is depends somewhat on the build in effect (try it with the scale effect) and the exact position of the data labels, but it should be easy to notice and reproduce.
How can I get it to stop doing this? I've been working with a set of data for a presentation that happens once per year for a number of years now. Older versions of Keynote did not do this. The problem started at, I think, Keynote '08, and has continued in Keynote '09.
One workaround is to move the data points back into the slices, but for the data I am presenting several of the slices are too small for this to be practical. So I need a real solution.
Any help much appreciated.
Thanks,
David

Nothing? Really? Nobody has any ideas? Did anyone even try it? Can anyone at least verify whether or not you can reproduce the problem?
Thanks

Similar Messages

PLEASE HELP - COLOR SHIFTING PROBLEM on output NTSC monitors

http://www.smmlv.com/testproject/
Above is a link to a layered photoshop file that has a USA map and over a dozen network overlays used in a section of our video. I animate each layer on sepeartely in the video and have noticed a major problem recently, the color of the art does not hold true to placement. I created the art originally in Illustrator and then converted the file to Photoshop at 640x480, 72dpi. This has always worked perfectly in the past to display and animated artwork in FCP.
Right now, in FCP I am using the NTSC DV 3:2 frame size, and the compressor of DV/DVCPRO - NTSC. I have a JVC Profressional DV deck that hooks up through firewire and sends S-Video to my monitors. This setup has always given me a great picture even though it is not completely upcompressed. Using these settings and this art, the color lines on this map in red, light blue, yellow and purple all have a "color shift" to the left about 5 pixels. It makes it appear that the line is where it is in the file, but the color overlaying the line is offset to the left 5 pixels and transperant to about 50%. This occurs only when viewed on some TV's and NTSC monitors and projectors. The strange thing is, some monitors display the color aligned almost perfectly on these maps and other monitors and projectors show this "digital halo" of color shifting really bad. If I take the layered network overlays in these colors and color tint them to black or grey, white, light green, or even light orange, they no longer have the color shifting and the detail is perfect.
Is there any way to fix this problem? I have tried duplicating the sequence and setting the compressor to 8bit Uncompressed, and while my captured footage is not this compression, in theory the art should render at this higher resolution setting. This did nothing to solve the problem.
I also have tried using different Broadcast safe and Y/C corrector filters with different results. The Y/C filter allowed me to reposition the color problem and thus removing most of the problem, but also removing most of the color. Nothing else has allowed me to seemingly move the color into the proper possition.
What is causing this color shift on the displayed NTSC image?
In FCP 4.5 I can see my rendered video in the program viewer screen and besides the pixel compression appearing on the lines, overall the video looks great paused or even better when playing. Then you view it through my deck onto my Pro Sony NTSC 19" color monitor and it also appears great, with a slight color halo to the left of these colors, but the color in the lines are there. If you are a few feet from the screen and know what you are looking for you might see it, but doubtful. Then you view it using the same signal on a 17" Samsung TV and the color shifting makes the map and other art, like the clients blue logo, look horrible, with each color line appearing twice and offset left from each other as if you had double vision. Normally I would think it is the TV causing this, but then we tested this same movie on 2 differnt projectors. The $700 Epson projector displayed everything beautifully, again with only the slightest color halo to the left, but then the Panasonic $4000 projector made everthing in these colors look double vision again. What is going on???
One more thing to keep in mind, my color bars also show this problem with these colors as well as shot footage of these facilities. There are tall red poles in the shots and everything displays fine except for the red pole color looks like it's glowing off the pole to the left.
PLEASE tell me there is a solution to this.

I have tried Degaussing, using filters, changing cables, and testing other monitors and systems on these monitors, everthing I can think of to solve the issue. Is it FCPo or is it the monitors?... or is it a signal strength thing. Can monitors and projectors shift color when the signal is read from a DVD or Mini DV Deck? Is there a fequency difference (Ie: 75mgz or 80 mgz) that might be causing the shift in some monitors and not so badly in others. But if this was true, how would some DVD's (like Baby Einstein DVDs that use really bright colors) display red and blue perfect using these same player and monitor, while my projects is shifting color? Doesn't that rule out the signal from the DVD player if other DVD's do not have this issue?
I have uploaded the original art used, an exported .jpg file from the FCP timeline and sample photos of 2 different monitors to show to show this problem as best I can. http://www.smmlv.com/testproject/
Someone out there must have had this problem before. There's no way a color shift problem like this with Mini DV has gone on this long without someone seeing it.
One last thing about what I have tried... I do understand that with editing in Mini DV instead of uncompressed or HD video I lose a bit of resolution (4:2:2) and I see this compression occuring in some of the areas in the video where these problems persist. But, I did remake the art and rerender this project in an 8bit uncompressed settings and then displayed that up on the screen and I get the same color shift. I keep going in circles trying to find the culprit that is causing the delema.
PLEASE HELP! There are large tours going through our facilities daily and the large screen projector is displaying this problem as well. Let's just hope they don't notice and that their TV's at home or office does not display it on our final DVD's made.

Gantt Chart Related Problem

Project Link:
PPPM
How to solve these problems.
Problem 1:
I have to scroll both the Gantt Chart and Task List scroll
simultaneously. When i scroll Gantt Chart , then at the same time
Task List and vice versa.
Problem 2:
How to stop Gantt Chart header movement stop when scroll the
Gantt Chart.
Problem 3:
In the Gantt Chart Node, there are 2 section. One is dark
section and other is lite section. I have to slide these scctions
like like HDevidedBox effect.
Please help me out from these problems.

Hi Vedant,
values are displayed in pie chart their label is not display.
So you're able to view the value and label information when you hover over a slice i.e. viewing the tooltip, but you can't see the actual label for each slice of the pie. If you're not seeing all of the labels for the slices of the Pie chart, then this could due to a couple of reasons:
1) the length of the label
2) the position of the label
3) the size of the chart
Keep in mind that displaying all 41 labels on the chart could result in an extremely cluttered looking chart. AnyChart controls the visibility of the labels, depending on the above factors. So if your labels are quite lengthy, for example, and they are positioned to be displayed outside the chart, then AnyChart will display what labels it can for the given chart size. To work around this, having tooltips enabled is a good starting point. Alternatively, you could look at decreasing the length of the label text, changing the label position or even increasing the size of the chart. For further information on the label formatting, I would recommend reviewing AnyChart's online documentation, here: http://anychart.com/products/anychart/docs/users-guide/label-text-formatting.html?fromtree.
Regards,
Hilary

Bubble chart legend problem

Hello.
I have problem with bubble chart the problem is that in chart legend appear the same number of object what bubble in chart e.g. if chart have 5 bubble then legend also have 5 object.
What do I want to obtain is that in chart appear bubble which have different color (color depends on condition) and legend relate only colors. For example if chart have 4 bubble 3 - red and 1 - green then in legend appear only two position which relate green and red color (now appear 4 object three about red and one green).
Can any one tell me how to resolve this problem?

I already did this I added three condition (three colors red, green and yellow) in field "Value of" I choosed "is equal to" unfortunately it didn't help.
Maybe I joust try to describe what I want to show in this chart.
Suppose I have table with four columns u201Cdateu201D, u201Camount (number type)u201D, u201Csize (number type)u201D, u201Crisku201D (text type) now where this value appear on chart:
- date is x axis
- amount is y axis
- size is a bubble size
- risk will be bubble color
Now I have 3 kind of risk u201CLowu201D (green color), u201CMediumu201D (yellow color) and u201CHighu201D (red color).
Now in my data base I have table with record:
- u201C11-11-2009u201D, u201C1u201D, u201C2u201D, u201CMediumu201D
- u201C12-11-2009u201D, u201C2u201D, u201C1u201D, u201CMediumu201D
- u201C13-11-2009u201D, u201C1u201D, u201C1u201D, u201CHighu201D
- u201C14-11-2009u201D, u201C3u201D, u201C3u201D, u201CLowu201D
- u201C15-11-2009u201D, u201C1u201D, u201C1u201D, u201CLowu201D
Ok so now In My chart I should have 5 bubble and in legend three value (green, red, yellow) but in this case I always have five (the same number what record in table).
Sorry if this example is not clear.

EMac Raster Shift problem

Hi All, I got an eMac 700Mhz in Jan'09 this year with the infamous Raster shift problem for SGD70.00. Managed to download the eMac take apart step by step instruction. Took a day leave and started my expedition exporing the inside of eMac.
As I am electro-mechanical academic trained the instructions was still very useful and in time, I had disassembled to the bare bone of the IVAD box and to the Farady's shield were all out. All this allow me to check all cables and connected link up to the IVAD cable inside CRT. Removed the IVAD (first remove the heat sink), inspected it and found some pins were loose either from my pulling it out or it had came loose graduately throughout the years from the curvature it was bend and the temperature.
Inspected and tested the resistivity of the IVAD cable with a voltmeter. Seems good, pushed all pins backed into position with the tweezer, cable tied and use hotmelt glue around the wire-pins insertion side making sure all are firmed and well insulated. On mounting, I moved the ferrite core beside with the other CRT core.
Before putting eMac back together, got the chance to hose off and clean up the casing. Oiled the fan and removed the wore out sponge sealed. Vaccum and clean up whatever seems dirty even the inside of the speakers box.
Put everything back to together and prayed to God, if this is for me make it work. Wah-lah! my prayers were answered. It booted up with the regular chime and on status light but with a black blank screen, just a couple seconds later the apple appear but screen was yellowish. Oops! something went wrong. Shut it down with the menu and rebooted it. Wah-lah! 2nd time my prayer were answered, the chime, the light and the apple on a grey bright screen. Burn-in for 12 hours without shutting down with sleep mode on and off. And it still work after 2 months.
Things to note; after removing the stand, and all the reviting hex screws from the casing. Be very careful when lefting up the casing because the on-off switch is still attached the casing.
Use a 3 pin plug cable with the grounding pin still plug into socket and leave the unit off to drain out any static or electrical charge still in the unit especial in the CRT as I do not have the CRT discharge tool. Touch the farady or any metal part before you disassembly the eMac.
On assembly, make sure all connection are hooked up and make ink markings with screws with differenct colors before you unscrews any screws inside the unit and place them into different partition box. I used the egg packing tray for this purpose.
Hope all this helps. Enjoyed your own eMac expidition.
Take care and think safety first, rather loose the eMac than injure yourself.

Hope to find out more possible solution and post in the forum. Enjoy your Mac!

Weird colour shift on TV through HDMI

Hi,
I'm using my TV with XBMC to watch videos on my computer more comfortably, but even since I changed my computer the image get those weird shifts where it goes black for about a second, comes back on looking weird, then about 20 seconds later it's one second of black and then back on as normal again. But if I change channel on my TV when it happens, and then switch back to the HDMI channel corresponding to my computer, the image is fixed. I've tried timing this issue, and it seems to appear roughly every 20 minutes, but it can appear twice in 5 minutes, or not at all in 40...
Because an image is worth a hundred words, I took a picture with my phone during one of these colour shifts, here's what it looks like: http://img152.imageshack.us/img152/3284/imag0063gc.jpg . As you can see by the xbmc menu looking weird too, this is not the video's fault.
I've also tried switching the cable, but the issue remains. I've been using this setup for a while, but as I said, I changed computer recently, and part of this change was going from a nVidia card to an ATI one, more specifically a radeon HD 7870, and I'm using the official AMD driver (which is kind of required, since the free driver apparently doesn't support sound over HDMI for my card yet).
It's probably worth mentioning that my primary display, which is plugged in VGA, does not have this issue. Also, I have a Windows dual-boot, but I have yet to test if this issue also appears on Windows (which is kind of a pain to do, due to the randomness of my issue...).
I've tried googling this for days and have yet to find anyone reporting the same issue, but seeing how English isn't my native language, I might not have used the right keywords...
Because I guess this is relevant, here is my xorg.conf on pastebin: http://pastebin.com/2eWPKnt2 . This was generated using amdcccle, so it should be legit (though I do miss nvidia-settings, amd got some work to do on their GUI tool). Not sure if this is relevant, but just in case : to launch the computer on my TV, I use this xorg.conf (named xorg.conf.TV in my system), and start X with the following command (through an alias, of course):
xinit .xinitrcTV -- /usr/bin/X :1 -config xorg.conf.TV
And my .xinitrcTV containing the following:
setxkbmap fr
xbmc
xterm
So here I am, and I don't really have any idea what I could do to fix this problem... Any help would be greatly appreciated.

https://wiki.archlinux.org/index.php/KM … odesetting

Averaging pmt signal and strange signal shift problem with recording

Hello
I'm a researcher at UCL and am quite new to Labview. I have a PMT and i've successfully created a program to read/show and write the data. From the signal I need the average pk to pk value and the average mean value. Is there any way I tell labview to average the signal out then display it and then write it to the file?
Also, I came across a weird problem. I have split the output signal of the PMT to an oscilloscope and the daq card. When I press record in labview I see a shift in the signal seen on the oscilloscope and labview records that shift. Why is this happening? I'm guessing the circuits of the daq and pmt are not completely isolated so how could I solve this problem?
Any help is really appreciated because I'm quite clueless about what to do next
Thank You
thh

Hello THH,
You could use the probability and statistics pallet found in the functions menu under mathematics, this will contain a mean value function which you could feed your data into. As for writing the data to a file I have attached a simple VI I'm am about to post as a community example that can help you understand how to format text files.
As for the problems you are having with the signal shifting, this could be due to a few reasons. The first is an impedance mis-match between the scope and DAQ card, you can check our website for the specifications of your card. The Second reason could be a ground loop issue, you could solve this using an opto-isolator circuit.
Hope this helps
Kind Regards
Regards
Andrew George @ NI UK
Attachments:
Text File Manipulation.zip ‏23 KB

Weird dual monitor problem with changing image colors

I have dual monitors, same brand and type, same color settings and adjustments, and so far image was the same on both of them. Nothing regarding monitors or color preferences I have changed, but suddenly I started having this weird problem. Example:
1. Here is the screenshot. I have pure red image, palettes and layers panel are on the second monitor.
2. I start dragging image window to the other monitor and STILL HOLDING the mouse button (like I said, dragging)
3. And when I release the mouse color suddenly changes.
If I pick window and drag again color returns to normal. As soon as I release the mouse color changes.
This is only happening on second monitor.
I re-installed graphic drivers, and also re-installed Photoshop CC 2014.
I also changed settings so the image both monitors show is the same (duplicate screen in windows) and there is no problem then. If I return to extended display problems FIXES. But as soon as I lock the computer, and login again the problem shows up again.
Any ideas what should I do or how to fix it?

I see your using Window have two displays. I not sure how windows handle profiles for both displays. Your displays are the the same models. My Displays are physically about the same size bothe 16:9. One displays 1920x1080 pixels the other 1360 x 768 so the resolution are quite different requires me to create special wallpaper. to make sean looks seamless or image on have the same composition.
I notice that when I drag a window between displays a size difference but the color consistent. When I release the mouse button I see a color shift and a screen capture shows this. And if I drag the split window the cole os once again consistent. I think what we are seeing is more a Windows thing not a Photoshop thing.
I'm using Windows 7 and CC 2014. I do notice my window drags over the toolbar and under the pallets on the second display. Your window drags under your toolbar.

Weird iSight + Quad problem...

I just got my brand new Quad and connected my old iSight to it. I connected it to the firewire port in the back of the G5. It was really laggy and the image shifted from dark to lighter, dark to lighter. So i disconnected it, and plugged it in to the firewire port in the front - works perfectly!!
Hmm.. i thought, maybe it's something with the firewire port? I tried connecting my 3rd gen. 40GB iPod (firewire), to the back firewire port and tried to transfer some files. Files transfer at normal speeds, both read/write. That's kinda weird, isn't?
So is it the iSight that's the problem?
Jakob
P.S. External harddrives work fine on both ports (front/back).
Quad G5 Mac OS X (10.4.5)
iMac G5 20" rev a. Mac OS X (10.4.5)

That is odd. I recently got an iSight Update sent to my iSight. Perhaps a quick check to see if your is up to date may help.
It is very odd that you should experience the problem on one FW port but not the other.
Beavis2084

Weird Chart of Accounts

Hi,
I have imported my client's Chart of Accounts into SAP Business One 2007A. After import, everything was fine and the active accounts were all in their respective levels and properly organized. However, a few months later, some of the level 5 active accounts shifted by itself to level 2 and are no longer in their respective positions in the Chart of Accounts tree.
I have checked the change log and there was no indication of any modifications by users. The last logged action was our import activity via DTW. However, compared to our pre-golive database which has the same log instance, the position of the said active account have now changed to level 2. We definitely did nothing and as far as I am concerned, the only way it can shift is via the edit Chart of Accounts.
What could have caused this?
Regards,
Alvin

Hi Bishal,
No upgrades done. Restarting the server did not solve the problem because I am able to replicate the problem on my own side.
So, you are saying that when you edit chart of accounts, no logs will be made?
In that case, I am not sure if someone is messing around but it is quite unlikely as only the Finance personnel have access to the Chart of Accounts.
Yea, I guess the only option is to edit the Chart of Accounts again. Is there anyway we can mass edit the Chart of Accounts like moving multiple GL Accounts instead of doing it one by one?
Regards,
Alvin Chong

Weird Video Squeezing Problem

Hello.
I'm having a weird video problem and I thought I'd see if anyone else has experienced it.
I'm running the MSI nforce board with an AthlonXP 1700+ with two Micron 256MB PC2100. Firmware 2.6. Windows XP Home Edition with SP1. I have a four-year old ViewSonic GT775 that I've always had good luck with.
I've been using the latest nForce 2.93 drivers since they came out and am running the 41.03 Detonator drivers. I've tried downgrading to the 40.72 with no change.
I run my desktop at 1024x768x32bit and what has started happening the past couple of days is that the image on my desktop will randomly squeeze in about a half-inch on each side. It will stay like this for a while and then randomly go back. It wouldn't be a big deal if it just stayed like this, but it randomly clicks back and forth. Changing the color depth or refresh rate does not affect it. Even shutting down and then restarting doesn't affect it. If it was squeezed when I shut down, it'll be squeezed when I restart.
Very weird. For now, every time it does it, I just use the monitor controls to resize the display, but it is annoying to have to do it. It seems like right before its going to switch, I'll see minor tearing.
Has anyone else experienced this? Could it be my monitor? I do have another computer at work and I could bring the monitor home. My experience in the past with monitors is that when they start to go, the colors change and the brightness dims and then they just stop working. My monitor today is as crisp and bright as the first day I bought it, so I think it's the onboard video.
Does anyone have any ideas?
Thanks!

Your image resize problem sounds like a refresh rate problem to me. It looks as if your monitor cannot catch the correct refresh or follow the hi speed refresh you ask. It can come from either the board, the monitor or just a bad connection. I would tend to say the monitor, as it is getting a bit old.
Failures in monitor can come from diffrent parts. If it is the electron canon, you can see a lowering of the luminosity/contrast. Same for the high voltage grid. A problem on your deflection parts could lead to a color shift or distorted image. Here, i'd say it is a problem with your synchronisation signal. Try a degauss also. You may just have a shifty ground.
Frenchy

Some playlists don't show up - weird iPod syncing problems

Apologies if this question has been answered elsewhere - couldn't find the answer when I was searching the boards last night. Don't know if this is an iTunes problem or an issue with the touch...
Last night, I plugged my iPod touch (1G) into my MacPro to add some new music. This is when things got weird!
First, I noticed that my iPod's name had mysteriously changed since the last time I synced it. It used to be called "Christine's iPod" and now it has reverted to the default "iPod touch."
Next, when I went to add some different playlists to the iPod, I noticed that one of the playlists I wanted to add didn't show up in the Music tab, so I couldn't "tick" it for inclusion on the iPod. This isn't a new playlist, and I have successfully synced it with this iPod in the past. I tried renaming the playlist and making a new playlist with the same songs, and neither of these playlists showed up either. BTW, I definitely don't have too many playlists - I probably have 100-150 playlists total.
Anyway, I restored my iPod and starting from scratch - and the playlist still didn't appear to be available to sync. I ended up adding the playlist by "manually managing" my music, but this isn't an ideal solution. I'd like to be able to sync the playlist!!
Don't know if it's relevant, but my bf also has an iPod touch that he syncs to the same iTunes account. We have separate computer logins, and our iTunes Library is on a shared disk on our MacPro (to prevent needlessly wasting HD space due to song replication) and occasionally we both get messages saying we don't own or don't have permission to access the Library when opening iTunes. To solve this, we alter the permissions on the disk and apply to enclosed items. Maybe this happens after updating iTunes or adding new songs? Not certain what triggers it.
Thanks in advance - this is really bugging me!

This isn't foolproof but there are usually two things that contribute to songs not appearing under Artist on the iPod, both due to information either in or missing from the Get Info>Info tab against the song in iTunes. 1) the song has no album name associated with it or 2) the song is marked as part of a compilation.
If tracks are missing an Album name (as mentioned above) in the Info tab, this information needs to be filled in. The no album one is a bit quirky as the songs will appear under certain circumstances but the simplest remedy is just add None or Miscellaneous in place of a title. See this link for more detail: I don't see some of my songs when browsing by artist on my iPod
Also if the tracks are ticked in the Get Info>Info tab as part of a compilation, they will not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. Compilations are stored in a separate folder in iTunes so the songs don't appear inside the normal Artist>Album folder which may be why this happens.

Chart alert problem in BO 4.0

Dear Experts
We previously used BO XI 3.1 Edge series, Service pack 2. In this server we have develop some of the reports use alerts in line chart (Vertical Mixed Chart).
Now we migrate our server to BO 4.0 Service Pack 2. After migration complete we have seen that alerts of the chart is not working. and also we can not use alert in any chart in a new report.
Would anyone please help us to solve this problem.
Thanks in advance.
Md. Nahiduzzaman

Hi H
thanks for answering my question. Would you please help me a little more....
Currently i used patch 2.10 and product version of my BO is 14.0.0 and Build No is 565.
Is patch 2.12 is available and from where i can got it? i have checked it in "http://service.sap.com/support" and not find it..
Thanks
Md. Nahiduzzaman

Flash Chart Legend Problem

Hi,
Im having a problem with my flash chart legends in Apex3.0.
I have changed the name of the Series to what i want to appear in my legend - however the legend just shows "Value" for all my Series.
Does anyone else have this problem?
Cheers,
Immanuel

Hello,
I need a legend like this
No of Clicks('000)
If i give l" No of Clicks('000)" as column alias, chart says Error :No chart data available.
If i give "No of Clicks('000')" or "No of Clicks(''000)" as column alias in the query, it displays the correct legend..
Would anybody tell me how to show the legend like this
No of Clicks('000)
Regards,
Archana

Weird event display problem in week view

Hi. I'm getting a weird display problem in week view. First time this has ever happened.
Some events appear to be missing, but when i double click on where I know the event is supposed to be, a new event is created (as excepted), and the missing events suddenly appear. When i move forward or back by a week, and then return to the week in question, the missing events are gone again. But, I can see the missing events in day view or month view.
Any ideas?

Dean,
Next, try reinstalling the Mac OS X v10.6.2 Update (Combo).
If that is unsuccessful:
1. Use iCal>Export...>for each one of your individual calendars.
2. Delete all but one of your calendars.
3. Create a calendar and name it "Test."
4. Delete the calendar which remained after step #2.
5. Quit iCal.
6. Remove the iCal plist, and drag the iCal plist file to your Desktop.
7. Log out/in or restart.
8. Restart iCal and use iCal>File>Import...for each one of the calendars that you exported in step #1.
9. Delete the "Test" calendar, and any "Home/Work" calendar which was automatically created when you opened iCal in step #8.
;~)

Weird chart shifting problem?

Similar Messages

Maybe you are looking for