Weird issue with Site Template in O365

Hi,
I ran into a weird issue while working with Site Template in O365 last night.
I created a sub-site in a Site Collection with some Site Columns, CT and Lists. Then I saved it as a Site Template so that it can be used for different sites. Then I created 3 different sub-sites using the template. All went good.
After some time when I looked at the sites, something really irritating happened. I saw the first two sites were missing all the site columns and CT. And the latest third site had 3 copies of each Site Column and CT. Though for the first two sites,
all the CT, Site Columns were available at List level, but it wad just the reference. The Actual CT was not seen the site settings.
This is the first time I saw this kind of issue. Not sure what is the reason for this.
Any idea around this ?
Thanks,
Nutan
Nutan Sharma

Hi,
According to your description, my understanding is that the error occurred when you created a site from the template with no files in the document library.
I tested the same scenario per your post, and I can create a site from the template with no files in the document library with no errors.
To solve this issue, I recommend to verify the things below:
Did you save the site as a template with Include Content checked? If yes, I recommend to test if it works when saving the site as a template with Include Content unchecked.
Test the same scenario with a new site to narrow the issue scope.
I also recommend to check the event log and ULS log to see if anything unexpected occurred.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

Issue with site template that contains a document library with a lookup column to another list

I have a document library called Proposals with a lookup column in the same site called Document Categories (multiple values allowed). It points to a list called document categories. I have several sample documents in the Proposal Library that
contain valid document categories. When I save the site as a template and instantiate it, everything is fine. However, when I remove the sample documents from the Proposal library and rebuild the site template, I can't get the template to
create another site. I get an error Unable To Open Lookup List.
I don't understand why I can instantiate a site from the template when there's sample data, but not when the document library containing the lookup column is empty.
Does SharePoint 2010 site template support lookup columns?
Why would it make a difference if the library is empty?
Thanks

Hi,
According to your description, my understanding is that the error occurred when you created a site from the template with no files in the document library.
I tested the same scenario per your post, and I can create a site from the template with no files in the document library with no errors.
To solve this issue, I recommend to verify the things below:
Did you save the site as a template with Include Content checked? If yes, I recommend to test if it works when saving the site as a template with Include Content unchecked.
Test the same scenario with a new site to narrow the issue scope.
I also recommend to check the event log and ULS log to see if anything unexpected occurred.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

163; There seems to be an issue with the template that the site is using as there is a code to replace the pricing.

163;
There seems to be an issue with the template that the site is using as there is a code to replace the pricing.
<script>
// Script to extract the currency and decimals from the price
var price = "{tag_saleprice}";
var priceWithoutCurrency = price.replace( /^\D+/g, '')
var decimals = priceWithoutCurrency.substring(priceWithoutCurrency.length - 2, priceWithoutCurrency.length);
var roundedPrice = priceWithoutCurrency.substring(0, priceWithoutCurrency.length - 3);
$('.image-with-price.big span').html(roundedPrice+''+decimals+'');

Here are the screenshots for what it's worth.
Not sure why I can't post them in the original post. 
Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]
'''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
'''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

Weird issue with Exchange 2010 Room Mailboxes - allows multiple booking of the created meeting rooms

Hi,
we are facing weird issue with Exchange 2010 Room Mailboxes
it allows multiple booking of the created meeting rooms.Sometime we are not getting acceptance or declined mail but and we could see our meetings has been booked at slot.
for e.g.
User A booked room1 with weekly recurrence for time 4pm to 5pm., and User B made his booking other day,without realizing that user A meeting is exists.
Neither of user A nor user B got declined/rejected emails.
please sahre guidelines if anyone known to this issue.
Note - Allow Conflict booking is disabled already :) but still have issue
Thanks,
NPratik

Hi,
Just add more in this issue, following testing is done.
referring results and conclusion, you will get better view on issue
====================
Test Case - 1
User OnCloud/O365 - Pratik Nimbalkar
Email ID - [email protected]
( same as UPN)
Room Booking Scenario - Book Room for 6.30pm to 7.30pm slot
Results - Accepted
Room Booking Scenario for same slot- ReBook Room for 6.30pm to 7.30pm slot
Results - Declined
Conclusion = working fine
==================
Test Case - 2
User OnCloud/O365 - Testsm
Email ID - [email protected]
( different from UPN)
Room Booking Scenario - Rebook Room for 6.30pm to 7.30pm slot
Results - No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
Room Booking Scenario for same slot- Rebook Room for 6.30pm to 7.30pm slot
Results -No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
=========================
Conclusion = There is issue with booking room and not getting response while user is
@abc.my id.
======================
Note = for all other on premise users those are having @abc.co.in
and @abc.my it is working fine. Users are getting respective correct reply from room mailboxes.
This issue seems with only on cloud
@abc.my users

Having a weird issue with my assign after java embedding

hi,
I'm having a weird issue with my assign activity, i am using a Java Embedding wherin i access a variable and assign it some data, later in next step when i try to assign some other data to this same variable in assign activity i get a Error message as below.
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure} parts: {{ summary=Invalid to part type. When performing the assign operation, the to node THIS,IS,,TEST is invalid. The node named in the error message was either null or an empty node set, and it was not an instance of org.w3c.Element. Verify the node value at line number 795 is not null and is an instance of org.w3c.Element. } .
i'm using soa 11.1.1.5
Can anyone please help ?
- Thanks
Shirish

Shirish,
It's a bug and you will need to apply a patch for that.
You can find all explanation in Oracle Support Id ID 1194228.1.
Arik

Weird issue with safari on iPad mini?

I just had a weird issue with my safari web page, it stopped responding to my scrolling. I then tried coming out of it and going bad in again a couple of times, which still did not work. It then started jiggling around all over the place (jiggling is the only word I can use to describe it), it was as if you had clicked and held the page with a mouse and then started moving the page all over the place, or even like an earthquake on the page. The tab then closed. Can anyone explain this? Thanks.

Quit Safari then reset your iPad.
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Weird Issue With Windows Live Mail

I have a friend using Windows Live Mail and he's been having some weird issues with it. When he goes to forward an email, it will occasionally open the email up twice, which isn't a huge deal it's just more annoying than anything. I thought maybe there was
some malware or other junk that could be causing it so I ran MBAM and got everything cleaned up but it's still happening. Any other thoughts on what could cause this?
Thanks.

Windows Live Mail support is found @
https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=12&ct=1410798892&rver=6.1.6206.0&wp=LBI&wreply=https:%2F%2Fanswers.microsoft.com%2Fen-us%2Fsite%2Fcompletesignin%3Fsilent%3DFalse&id=273572
You must login to your Windows Live account and then Ask a Question.
This forum is dedicated to the Windows 7 operating system. Windows Live is not a feature of Windows 7 and Microsoft has established support for Windows Live Mail @ the Microsoft Community found @
http://answers.microsoft.com/en-us/windows/forum/windows_7-ecoms?auth=1
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Weird issues with latest X-Fi Driver/Software

-Weird issues with latest X-Fi Driver/SoftwareO So I decided to update my X-fi drivers and software today, but I am running into some issues.
First and foremost is that my Volume Panel no longer works correctly. It brings up this cheap pos window when I click on the Systray icon instead of the corrrect full featured interface.
It lists the merdia source programs and has a volume dial, thats all this new one has.
The other issues are that none of the software updates want to install: Alchemy, Mixer, Mediasource Go
They all give me a message after I being to install that says "can not locate layout.bin please specify the path"? and gives my a "this setip reqires a cd" window and lists a path to a temp folder inside my windows folder.
Installing these for Vista? Ultimate 32-bit.

-Weird issues with latest X-Fi Driver/SoftwareO So I decided to update my X-fi drivers and software today, but I am running into some issues.
First and foremost is that my Volume Panel no longer works correctly. It brings up this cheap pos window when I click on the Systray icon instead of the corrrect full featured interface.
It lists the merdia source programs and has a volume dial, thats all this new one has.
The other issues are that none of the software updates want to install: Alchemy, Mixer, Mediasource Go
They all give me a message after I being to install that says "can not locate layout.bin please specify the path"? and gives my a "this setip reqires a cd" window and lists a path to a temp folder inside my windows folder.
Installing these for Vista? Ultimate 32-bit.

Issue with Report Template in EHS

Hi Gurus
I have an issue wiht report template in EHS. When i go to CG42 i tried to search for a report template no entries found. But if you F4 in template field there are templates getting displayed. If i select template and enter again, it says no object available. Looks like weird. Template is very well available in system. If you have this issue please guide me to correct the situation. Also can you please let us know what is the table to check report templates.
Regards
Murali

Hi Murali,
with TC code - CG34, u may further try the following path -
File with path - Character standard
<path on application server>:\BP_PH_EHS_MSDS.DAT MS-NT
<path on application server>:\BP_PH_EHS_COVERL.DAT MS-NT
Choose Check File (F5). The transfer file area is filled with data.
Choose Start/Transfer time (F6). The symbol match up is displayed.
On the Import Report Template: Symbol Matchup screen choose again Start/Transfer time. MS Word for Windows is started with the template.
Choose Check Template. upcoming warning messages may be Ignored.
hope the issue is solved.
with regards,
mahesh

Issues With PDF Template Mapping

Hi all,
Oracle BI Publisher for Windows 10.1.3.2.1
Oracle Publisher Desktop 10.1.3.2.1
Adobe Acrobat 5.0.5
Broswer IE 6.0.29
I have created a report based on a single database table (DEMO.PRODUCTS) but am experiencing problems when I try and map the form fields in PDF Template to my sample XML file.
I created a PDF Template and uploaded this template to my Layout. This PDF Template has two form fields on it (PRODUCTNAME and UNITPRICE, which incidentally are the names of the database columns I want them to map to).
I have also uploaded my sample XML data file and therefore have access to the Map Form Fields button on my report definition. However, when I click on the button a new window opens with the Map PDF Form Fields and a dialog to "Click on each highlighted...." and then hangs. When I close the window I receive a message about an Adobe Acrobat error.
If I try and do the same thing in Firefox then I receive a message in the JavaScript Console:
Acrobat Database Connectivity Built-in Functions Version 5.0
Acrobat EScript Built-in Functions Version 5.0
Acrobat Annotations / Collaboration Built-in Functions Version 5.0
TypeError: app.execDialog is not a function opened this in Adobe Acrobat
Any suggestions or comments appreciated.
Many thanks,
Gary.

Hi Aashish,
I suggest you to check the RTF Template of your report ....as if your xml output file on submit request form--->diagnostic --->view xml ...is generated ... it means that your data defination file is perfectly fine but there is issue with your rtf template....may be some of grouping or tag is not put properly...
one thing i want to suggest you to pls save that data file as .xml extension and upload in rtf u designed on youe desktop.... check theprview if its coming fine or not.
let me know if u still facing the same problem.
regards
Ratnesh P

Weird issue with cli php..

I try to start my script off with
#!/usr/bin/php -r
So that I can not use the <?php and ?> tags, and I keep getting an error.
Can anyone get this to work?
I am using a custom compiled php, so maybe something is wonky on my end..
I keep getting
Parse error: parse error, unexpected '.' in Command line code on line 1

Hi,
Just add more in this issue, following testing is done.
referring results and conclusion, you will get better view on issue
====================
Test Case - 1
User OnCloud/O365 - Pratik Nimbalkar
Email ID - [email protected]
( same as UPN)
Room Booking Scenario - Book Room for 6.30pm to 7.30pm slot
Results - Accepted
Room Booking Scenario for same slot- ReBook Room for 6.30pm to 7.30pm slot
Results - Declined
Conclusion = working fine
==================
Test Case - 2
User OnCloud/O365 - Testsm
Email ID - [email protected]
( different from UPN)
Room Booking Scenario - Rebook Room for 6.30pm to 7.30pm slot
Results - No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
Room Booking Scenario for same slot- Rebook Room for 6.30pm to 7.30pm slot
Results -No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
=========================
Conclusion = There is issue with booking room and not getting response while user is
@abc.my id.
======================
Note = for all other on premise users those are having @abc.co.in
and @abc.my it is working fine. Users are getting respective correct reply from room mailboxes.
This issue seems with only on cloud
@abc.my users

Weird issue with 10.0.1.0 on Linux - 5 mins delay in server start-up!!

Hi ...
I am having some weird (and unique??) issue with WLS 10.0.1.0 on RHEL servers.
WLS installation on our DEV env works perfectly fine and the server starts up in 15-20 secs. for each of the two domains created on it.
But the QA server is another story all together ! ... It has the same OS and version, WSL installation and version, hardware configs, processes running at the time of start-up etc. But the problem is that when I try to start the server on the only domain on that server, it always gets delayed by 5-6 mins in between the startup at this point -
+<Feb 17, 2009 *7:04:50 *PM UTC> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.0 MP1 Thu Oct 18 20:17:44 EDT 2007 1005184 >+
+<Feb 17, 2009 *7:10:56 *PM UTC> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /opt/bea/license.bea>+
(Notice the 6 mins delay in the timestamps)
There are no logs getting generated within this time and it seems like the WLS 10.0.1.0 just spaces out
After the delay it starts up pretty fast .. within 10-15 secs!!
Anybody here seen such behavior with WLS
thanks,
--Shailesh Welankar

I recommend taking some thread dumps during this delay and contacting support to get some advice.
You can take the thread dumps by kill -3, JRockit Mission Control, etc.

Issue with site load time when exported as HTML. Addressed?

Has the issue with website load time been addressed?
I believe the site attempts to load the entire image content at the initial visit - meaning any galleries with numerous pictures are all included when first getting to the site. This is causing a HUGE increase in load time. I was told when I last brought it up that it was an apparent issue that needed to be addressed.
Any type of resolution coming?
Site for reference: www.dkrecollection.com

Major updates of Muse are targeted to release roughly every quarter. The 1.0 release was in mid-May. The 2.0 release was in mid-August. A fundamental change to image loading would only appear as part of a major update due to the engineering and testing efforts required.
As provided in your previous thread http://forums.adobe.com/message/4659347#4659347 the only workaround until then is to reduce the number of images in the slideshow.

Weird issue with Purchased Song!

I just downloaded "Your Graudin Angle" by Face Down. The song is listed for 5:12 but nothing plays between 3:48 and 5:12. What is wrong?

Hi,
Just add more in this issue, following testing is done.
referring results and conclusion, you will get better view on issue
====================
Test Case - 1
User OnCloud/O365 - Pratik Nimbalkar
Email ID - [email protected]
( same as UPN)
Room Booking Scenario - Book Room for 6.30pm to 7.30pm slot
Results - Accepted
Room Booking Scenario for same slot- ReBook Room for 6.30pm to 7.30pm slot
Results - Declined
Conclusion = working fine
==================
Test Case - 2
User OnCloud/O365 - Testsm
Email ID - [email protected]
( different from UPN)
Room Booking Scenario - Rebook Room for 6.30pm to 7.30pm slot
Results - No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
Room Booking Scenario for same slot- Rebook Room for 6.30pm to 7.30pm slot
Results -No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
=========================
Conclusion = There is issue with booking room and not getting response while user is
@abc.my id.
======================
Note = for all other on premise users those are having @abc.co.in
and @abc.my it is working fine. Users are getting respective correct reply from room mailboxes.
This issue seems with only on cloud
@abc.my users

Having An Issue With Site Loading In Firebox

Hello,
I'm having a small issue that I could use some help with. I'm not really sure what is going on, but I'm having an issue with one of the pages from my site not loading when trying to view the page in Firefox. But if I load this page in Safari or Chrome, it loads just fine.
Here's the page URL to take a look: 
Specific link removed from display by moderator ~J99 <sitename>.com/top-10/top...services/

Any idea on why this could be happening or how to fix it? I'm not sure if it's just my computer, or if others are having the same issue.
Thanks in advance,
Mike

Hello Mike,
I have no problem loading and seeing the page <site>.com/top-10/...monitoring-services . General advice would be to try clearing cache and site cookies on the machine you are using.
*see [[Firefox can't load websites but other browsers can]]
I imagine you will have easy access to other machines on which you can test with Firefox so hopefully you will be able to test and demonstrate that the page does normally load on Firefox.
Website design is outside the scope of this forum, but you probably have a professional team working on that.
I did note from <sitenname>.com/disclosure/
<blockquote>Disclosure In regards to the new FTC regulations, we are making this page to be compliant with 100% transparency regarding disclosure of incentive and paid reviews. Every page on this site has been created to generate revenue. This site generates income through banner advertisements and affiliate links on product reviews.</blockquote>

Weird issue with Site Template in O365

Similar Messages

Maybe you are looking for