Weird issue with sound control?

I am not sure what is going on with my audio controls. I use MSI to control my audio (it's connected to the motherboard). The strange thing is, a crack appears on the "Reset EQ Setting" button.
See link: http://www.facebook.com/photo.php?pid=30673857&l=2041bbbec3&id=1458901123
That wasn't there when I first got the computer. Is there any way I could reinstall this? What could have caused the "crack" to appear? Has this happened to someone else?
I have also noticed that sometimes when I am playing music, the sound wavers, as if I am adjusting the volume slowly up and down by 1 degree. Is this an issue with my motherboard or WMP? Please answer both questions.

Quote
I cannot find the MS-XXXX anywhere!
Please read this thread:
https://forum-en.msi.com/index.php?topic=113146.0
If you can't find the model number, please look at the BIOS P.O.S.T. Status Screen and write down the full BIOS ID String as it appears in the following example picture:
Example (taken from the second picture): A7375NMS V2.2
The BIOS ID String will tell us a lot about the System. In the above example, the following information can be decoded from the ID String:
A...AMI BIOS Implementation
7375 ... Model Number (=MS-7375)
N... NVIDIA Chipset Board
MS... MS Standard BIOS Release
V2.2 ... BIOS Version 2.2

Similar Messages

Having an issue with Parental Controls...

Hi, I'm having an issue with Parentel Controls.
I run several student labs set with parental controls on the systems for a higher education facility. We don't have restricted access to web content (our students need to look up a lot of things, even some that would be considered racey, it's an arts school) and when I set it to "Allow Unrestricted Access" to web content, about a week or so later I'll start getting reports that content is being blocked. I go to check, and sure enough the controls are set to "restrict access to content".
I've had two interations of this issue thus far and it's a pane to go through each system (there are a lot of systems) and manually reconfigure them back to default.
Any tips?

My son could not interact with sites (log in, post) but he could access them (when parental controls were turned on). I had to go under "preferences" on Firefox (under his name) First go to the drop down the menu from the word "Firefox" then "Preferences" "Privacy" (at the top) then "Exceptions" on the right..... and add each address of the sites and pages I wanted to allow. That worked like a charm!! Maybe pull up the itunes STORE address, copy and paste it in "always allow" (you can choose "block" also.....) This is in Firefox PREFERENCES, not just the parental control section.....
Let us know if that helped! Apple was NO help. (I am an Apple fan, but I am not paying 49.99 to get a question answered by someone who didn't sound like he knew anything, anyway...) I think when you pay for a computer you deserve to have ALL the features work... Is that too much to ask?

Issue with copy control of Delivery document to Billing document

Hi All,
I am having some issue with copy control of Delivery document to Billing document.
I am having two line items in Delivery documetn, one is for item to be delivered to customer and other which is created due to batch determination.
Now , when I create billing document (VF01) with reference to this delivery document , I want only one line item (for the one which needs to be delivered to customer).
I have used following things in copy contro from ZLF to ZF2:
Copying requirements: 004 ( Deliv-related item)
Data VBRK/VBRP: 007 "(Inv.Split (Rec/Div))
Is it correct or shall I use something else, so I have only one line item in Billing document.
Regards
Nidhi

Pls. search the forum.
Pls. refer the below link -
Line with 0 quantity for main item with batch split
Thanks

Having a weird issue with my assign after java embedding

hi,
I'm having a weird issue with my assign activity, i am using a Java Embedding wherin i access a variable and assign it some data, later in next step when i try to assign some other data to this same variable in assign activity i get a Error message as below.
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure} parts: {{ summary=Invalid to part type. When performing the assign operation, the to node THIS,IS,,TEST is invalid. The node named in the error message was either null or an empty node set, and it was not an instance of org.w3c.Element. Verify the node value at line number 795 is not null and is an instance of org.w3c.Element. } .
i'm using soa 11.1.1.5
Can anyone please help ?
- Thanks
Shirish

Shirish,
It's a bug and you will need to apply a patch for that.
You can find all explanation in Oracle Support Id ID 1194228.1.
Arik

Weird issue with safari on iPad mini?

I just had a weird issue with my safari web page, it stopped responding to my scrolling. I then tried coming out of it and going bad in again a couple of times, which still did not work. It then started jiggling around all over the place (jiggling is the only word I can use to describe it), it was as if you had clicked and held the page with a mouse and then started moving the page all over the place, or even like an earthquake on the page. The tab then closed. Can anyone explain this? Thanks.

Quit Safari then reset your iPad.
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Weird Issue With Windows Live Mail

I have a friend using Windows Live Mail and he's been having some weird issues with it. When he goes to forward an email, it will occasionally open the email up twice, which isn't a huge deal it's just more annoying than anything. I thought maybe there was
some malware or other junk that could be causing it so I ran MBAM and got everything cleaned up but it's still happening. Any other thoughts on what could cause this?
Thanks.

Windows Live Mail support is found @
https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=12&ct=1410798892&rver=6.1.6206.0&wp=LBI&wreply=https:%2F%2Fanswers.microsoft.com%2Fen-us%2Fsite%2Fcompletesignin%3Fsilent%3DFalse&id=273572
You must login to your Windows Live account and then Ask a Question.
This forum is dedicated to the Windows 7 operating system. Windows Live is not a feature of Windows 7 and Microsoft has established support for Windows Live Mail @ the Microsoft Community found @
http://answers.microsoft.com/en-us/windows/forum/windows_7-ecoms?auth=1
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Issue with Sound Blaster Live! 24-bit driver

,Issue with Sound Blaster Li've! 24-bit driverw Hello, I have a 2004 Dell Dimension DIM900 and a couple months ago it began making a loud crackling noise sporadically. It sounds like real ear-piercing static, like when a microphone is being plugged in, only in short random bursts at alternating pitches so I originally thought my speakers were blown. I turned them off and decided to use a headphone set only to hear the same annoying sound.
I looked in the sound settings and read that I have a Sound Blaster 24-bit internal driver in my system, assuming that information is correct.
What can I do? I did the search and read the read on those X-Fi drivers that had a similar problem, but I didn't know if that was the same as this because the thread concluded that their problem was exclusi've to systems with Nvidia dual SLI graphic configurations and X-Fi drivers. ? Any input would be appreciated, thanks!

Hi IT5,
May I know if this Li've! 24bit came pre-installed on your Dell computer or did you purchase & install the sound card separately?

Weird issues with latest X-Fi Driver/Software

-Weird issues with latest X-Fi Driver/SoftwareO So I decided to update my X-fi drivers and software today, but I am running into some issues.
First and foremost is that my Volume Panel no longer works correctly. It brings up this cheap pos window when I click on the Systray icon instead of the corrrect full featured interface.
It lists the merdia source programs and has a volume dial, thats all this new one has.
The other issues are that none of the software updates want to install: Alchemy, Mixer, Mediasource Go
They all give me a message after I being to install that says "can not locate layout.bin please specify the path"? and gives my a "this setip reqires a cd" window and lists a path to a temp folder inside my windows folder.
Installing these for Vista? Ultimate 32-bit.

-Weird issues with latest X-Fi Driver/SoftwareO So I decided to update my X-fi drivers and software today, but I am running into some issues.
First and foremost is that my Volume Panel no longer works correctly. It brings up this cheap pos window when I click on the Systray icon instead of the corrrect full featured interface.
It lists the merdia source programs and has a volume dial, thats all this new one has.
The other issues are that none of the software updates want to install: Alchemy, Mixer, Mediasource Go
They all give me a message after I being to install that says "can not locate layout.bin please specify the path"? and gives my a "this setip reqires a cd" window and lists a path to a temp folder inside my windows folder.
Installing these for Vista? Ultimate 32-bit.

Weird issue with Exchange 2010 Room Mailboxes - allows multiple booking of the created meeting rooms

Hi,
we are facing weird issue with Exchange 2010 Room Mailboxes
it allows multiple booking of the created meeting rooms.Sometime we are not getting acceptance or declined mail but and we could see our meetings has been booked at slot.
for e.g.
User A booked room1 with weekly recurrence for time 4pm to 5pm., and User B made his booking other day,without realizing that user A meeting is exists.
Neither of user A nor user B got declined/rejected emails.
please sahre guidelines if anyone known to this issue.
Note - Allow Conflict booking is disabled already :) but still have issue
Thanks,
NPratik

Hi,
Just add more in this issue, following testing is done.
referring results and conclusion, you will get better view on issue
====================
Test Case - 1
User OnCloud/O365 - Pratik Nimbalkar
Email ID - [email protected]
( same as UPN)
Room Booking Scenario - Book Room for 6.30pm to 7.30pm slot
Results - Accepted
Room Booking Scenario for same slot- ReBook Room for 6.30pm to 7.30pm slot
Results - Declined
Conclusion = working fine
==================
Test Case - 2
User OnCloud/O365 - Testsm
Email ID - [email protected]
( different from UPN)
Room Booking Scenario - Rebook Room for 6.30pm to 7.30pm slot
Results - No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
Room Booking Scenario for same slot- Rebook Room for 6.30pm to 7.30pm slot
Results -No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
=========================
Conclusion = There is issue with booking room and not getting response while user is
@abc.my id.
======================
Note = for all other on premise users those are having @abc.co.in
and @abc.my it is working fine. Users are getting respective correct reply from room mailboxes.
This issue seems with only on cloud
@abc.my users

Wierd issue with Sound Blaster Z and Windows 8.1

I have just started having an issue with my sound card. For the past year it has been working perfectly fine with no issues. There have been no recent changes to the computer, but within the past week, if I am in the middle of a game or listening to music, the computer will once a day lock up, I then have to restart the computer. After it restarts, the right speakers, and only the right will not work, Center, Subwoofer, and Left side speakers work 5.0. I then go the Sound Blaster Z-series control panel and re-enable the surround sound. At this point the Center and Subwoofer cease to work, but the right side works perfectly fine. After a couple of resets the center and subwoofer still do not work. I then have to go to the back of the computer and change the cable for the center / subwoofer from left most to the second left most (as looking at the back of computer from the top side). It will work fine this way with all speakers working, for roughly a day then it will lock up again. I have to go through the same process, but move the cable from the second left most to the left most output for it to work again. I tried for the past two days to troubleshoot by removing all the software and creative drivers. Same issue after reinstalling with a fresh driver set. Any help, because this is completely annoying.
System Stats:
ASUS P6T Deluxe Motherboard
Intel Core i7 965 CPU
Corsair Dominator 3x2 GB
Intel 520 SSD 120 GB
Samsung Evo 840 SSD 250 GB
WD 500 GB (x2)
XFX Radeon HD 7770 (X2)
Sound Blaster Z
Windows 8.1 Pro 64 Bit
Thank You,
Michael Mastro II

Considering that there is already a ca0132 driver for linux, which was made to support chromebook pixel laptop. It should not be hard for creative to make that driver compatible with discrete cards and motherboards that make use of that chip. But Creative seriously dropped the ball on users and does not care about them. I do not understand this, because all previous creative cards are supported in linux. Steam OS and steam boxes are around the corner and Creative is missing a big opportunity.

Weird issue with 10.0.1.0 on Linux - 5 mins delay in server start-up!!

Hi ...
I am having some weird (and unique??) issue with WLS 10.0.1.0 on RHEL servers.
WLS installation on our DEV env works perfectly fine and the server starts up in 15-20 secs. for each of the two domains created on it.
But the QA server is another story all together ! ... It has the same OS and version, WSL installation and version, hardware configs, processes running at the time of start-up etc. But the problem is that when I try to start the server on the only domain on that server, it always gets delayed by 5-6 mins in between the startup at this point -
+<Feb 17, 2009 *7:04:50 *PM UTC> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.0 MP1 Thu Oct 18 20:17:44 EDT 2007 1005184 >+
+<Feb 17, 2009 *7:10:56 *PM UTC> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /opt/bea/license.bea>+
(Notice the 6 mins delay in the timestamps)
There are no logs getting generated within this time and it seems like the WLS 10.0.1.0 just spaces out
After the delay it starts up pretty fast .. within 10-15 secs!!
Anybody here seen such behavior with WLS
thanks,
--Shailesh Welankar

I recommend taking some thread dumps during this delay and contacting support to get some advice.
You can take the thread dumps by kill -3, JRockit Mission Control, etc.

Having some weird issues with logic 8

i am almost Positive! that i pushed some buttons or selected something to mess it up, i would be indebted to anyone who can help me with like three issues i'm having
I run my M-audio mobile pre into logic and am having these issues:
#1. track 1 and two seem to be tied together even though i select mono tracks... so i need to leave track two blank otherwise it interferes with whatever is on track one. and on the bar where i drag the loop i was using it has two O's that make like a vinn diagram symbol.
#2. the volume controll (the bottom left fader one) can increase the Db but not decrease...
#3 through my headphones the signal only comes out the right side. i am inputting my guitar/vox into the right input on the mobile pre, but i thought if the tracks were mono, it wouldn't matter.
please please please help, i need to get recording soon!
thanks.

i figured out the volume issue, with the weird stereo track, i needed to adjust it on both tracks (even though one was empty haha duh)

Issue with sound effects preference output (no sound)

HI,
Weird issue, my macbook will play any music or sound except sound effects like moving items to the trash or when something is done copying to my external drive.
I checked the sound preferences and everything seems right.
My Sound Effects panel works and shows the list of sounds.
"Play alerts and sound effects through:" is there but that list is greyed out (maybe because only one option?). It does say internal speakers
My Output is through the internal speakers and works fine.
I thought the problem might have been an external pair of speakers I had used. I hooked them up and selected the internal speakers from the menu and then disconnected the speakers but still silence.
I like the audio feedback especially with multitasking. Since all other audio plays fine it's not the internal speaker.
Any ideas?
Thanks,
Phillyman
A typo in the title Message was edited by: Phillyman

HI Carolyn,
Thanks for your reply! The weird thing is that this is a brand new system (about a month old). On my other systems I do have some audio software but I've hardly touched this system. I'm pretty sure it once did give me audio feedback. All the boxes are checked in the sound effects panel (including the play user interface sound effects).
My other systems all have external speakers and I've been too lazy to crawl under the tables and disconnect them. But here my followup. If you have nothing connected is the sound effects through menu: greyed out if you only have one source? In my case it is and I think that has something to do with my problem.
thanks for any and all help,
Phillyman
posted the message while still in the middle of it. Message was edited by: Phillyman

Issue with Period Control Table after copying Essbase adapter

Hi Experts,
I'm working on version 11.1.1.3 and have copied the adapters (Essbase, Pull + EPRi) in the work bench so I can add an additional target for the FDM application. However, I have an issue with the import process; it returns an error with the Time & Periods (I guess it's something to do with the Periods category).
I have reimported the Periods Control Table and updated the new application's Target Period & Year (whilst changing the system code in the Application settings to the newl adapter) and still receive the same error message.
Any direction or thoughts would be welcome.
Thanks
Mark

The time periods do not copy. You need to maintain them through the UI or upload them from excel. There is a KM article on this if you need additional detail.

Weird issue with Windows Server 2008 R2 Print Server

I have an issue with Windows 2008 R2 (VMWare Hosted) running Windows Print Server.
Prior to a small network change, the print server was working well, hosting about 80 different networked printers from various vendors.
We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers). The DNS servers never quite worked right and broke AD authentication to different servers, and was just a mess.
After rolling back we are not able to keep the printers online. If we ping them from the print server, the printer(s) never wake up, when a print job is submitted. If we ping them from one of the access switches, they work fine (until they fall back asleep),
to prevent this, if we start a ping on the server AFTER waking them up from the Switch Ping, they stay online and no problems.
If we stop the ping, they fall back asleep at some point, and again, won't wake up without intervention/switch side ping.
Has anyone experienced anything like this? Any tips on how I could possibly resolve it?
Thanks in advance.

Hi,
According to your description, the issue seems to be that the printers can't keep online. Sounds like a power managerment issue. Why these printers fall into sleep? Have you consulted this issue with the manufacturer of these printers? Do these printers
fall into sleep if them lose the contact with printer server? Have you tried to reset the printers?
>>We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers).
DNS client will cache the recently queried records. If the DNS server has replied with a wrong records, communication issues will occur. To clear the DNS cache on a Windows device, please run the command below:
ipconfig /flushdns
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Weird issue with sound control?

Similar Messages

Maybe you are looking for