Weird problem during synchronization !!!??

Hi all
I came accross a weird problem during synchronization. I am into customizing MAM2.5, and in testing phase. I created 600 local measurement documents and tried to sync. Nearly half of the documents got successfully posted at the back end and got deleted from the hand held. Nearly 250 documents were not posted and it stays in the hand held. On multiple synchronization also it is not getting moved but it says "synchronization successfully completed". The state in the upload syncBO (040) shows the state of these documents as "S" that corresponds to synchronized documents.
any of you had come accross this problem?? any thoughts??
Raj

Hi Raj,
Now that a new development, If the device was restarted manually please do a client data reset. Settings-> client data reset.
I know you have tried doing this before but I want you to check the following.
This will ensure that the data in the client and the middleware are consistent.
Check the MEREP_MON when you perform the first sync.
Download requests must be sent from the client to the middleware (They will be in I-Finished status after processing) and the response will be found in O-Waiting. When you perform the sync the second time all the data is sent to the client. Now the data in the client and the server are in-sync. Now if you change any data and sync the data should be sent to the middleware.
If it still doesnt work your only option is to reinstall MI on the device and start from scratch.
Let me know.
Best Regards,
Karthik

Similar Messages

Problem in synchronization

Hi, i intent synchronize but... appear an error:
Synchronization started
Connection set up (without proxy) to: http://clariana:50200/sap/bc/MJC/mi_host?~sysid=J2E&
Connection to server failed.
Problems during synchronization: Not found 404; The server has not found anything matching the URI given
I have various doubts with the settings:
- Host is the server the same when i enter in http://<server>:<port>/sld?
- Port is the same when i enter in http://<server>:<port>/sld?
- System is the name that i active in sap management console?
If all is yes... appear the error...
Thanks,

For J2ee Sync ....you need to connect to http://<host>:<j2eeport>/meSync/servlet/meSync?~sysid=....
whereas for ABAP sync yo need to connect to:
http://<host>:<port>/sap/bc/MJC/mi_host?~sysid=...
This is generally done in the Mobile Engine.config file of client. But to configure this first of all ..... you need use the steps told in the MI installation guide (New Technology). You can also use the Template installer in the NWA ->Administration->Deploy and Change for configuring the various setting required for ABAP sync.

Warning: Problems occurred during synchronization of the system landscape

Hello
I have created systems in system landscape, TMS is working fine, all the configuration steps are completed successfully.
am working in Solution Manager 4, in project change -SOLAR_PROJECT_ADMIN - Project Administration - in 'System Landscape' tab  Change request and when I activate change request management I am getting following messages:
1. Warning: Problems occurred during synchronization of the system landscape
2. The project is not released. Hence cycle can not be created.
Its bit urgent as I m in middle of this activity, please assist me on the same
Thanks
Sharmishtha

Hello Jason & Prakhar
Thanks for your quick response. I am basis person, and configuring this change request management for one of the project.
Jason:
Will you please check with your basis person about these settings and let me know the same. I have set the settings as follows
C= Development (source system)
T = Quality
P = Production
Prakhar:
I have checked with all RFC connections are working fine, authorizations are also properly given.
I didnt get your point No correctly defined maintenance project exists, I have already created project in project administration transaction, assigned the system landscape, I have activated project IMG in IMG Project and then going in change request tab to activate the change request management, where its giving me above error.
More over, as you have mentioned I am getting following message in SLG1:
Project CHARM_GBW not found in the project administration table
This is asking me to do following things:
Synchronize the project in Change Manager with the Solution Manager. Call the Solution Manager with the transaction SOLAR_PROJECT_ADMIN, and go to the 'System Landscape' tab, and then the 'Project Cycle' tab. Select the 'Change Request Management' field, and choose 'Refresh'. Project CHARM_GBW should then be available.
Where do I have to make entry for this? I can see the entry in /TMWFLOW/PROJMAP table too. I dont know what more I need to do for this.
Problem is I cant see Project Cycle tab in System Landscape. Prakhar, frankly I am not able to find any step wise document on this part. So will you please help me with some documents on this? I am from technical side thus there is bit difficulty to understand this scenario from functional view.
I will be grateful for your help,
Thanks
Sharmishtha

Warning: Problems occurred during synchronization in Charm with virtual sys

Hi Team
I have configured charm with virtual system --(Dev>V01>V02>) as client specific STMS , Where V01 is Quality and V02 is production system; When I do consistency check from solar_project_admin tcode for project created, it shows no errors ;
but when i try to activate the charma and click on "refresh" button , it throws following error
"Warning: Problems occurred during synchronization" ;I have checked the logs in SLG1 for object "/TMWFLOW/CMSCV" ; but
there are no errors except warnings for BC Sets , Can you pl guide what might have gone wrong ?
All the RFC's are working fine and there is no authorization issue in solution manager.
Thanks
Swati

hi,
for the CTS activation you must do all the below,
1. SMSY --> landscape creation
2. RFC Creations
3. Client Specific TMS configuration
4. Prj --> CTS activation.
go through the below doc,
[https://websmp209.sap-ag.de/sapdownload/011000358700000657692007E/eCTS_ChaRM_SP12.pdf|https://websmp209.sap-ag.de/sapdownload/011000358700000657692007E/eCTS_ChaRM_SP12.pdf]
jansi

CRM Genesys (G+ 7.5) addional fields during synchronization of call list.

Hello.
I have the requirement of sending additional fields to Genesys (G+ 7.5) during synchronization of call list.
Do you know if it is possible? I have searched for any documentation or similar topic and I haven't found any document.
Thank you in advanced.
JM

it can be done with the help of a system code 'sy-xcode'. it is initialised the time list is sorted so just keeping a check point, we can solve this problem.
Vishu Khandelwal

How do I get facetime on a MacBook Pro to work? I keep getting a " server encountered problem during registration.." message. I have FaceTime ver. 1.1.1

How do I get facetime on a MacBook Pro to work? I keep getting a " server encountered problem during registration.." message. I have FaceTime ver. 1.1.1
Thanks

Icapper wrote:
I will end up getting something other than Logitech speakers, since I'm just weird like that.
Your not weird, your a audiophile.
https://en.wikipedia.org/wiki/Audiophile
Good sound costs money. And with a 5.1 system your usually doing surround sound decoding for BlueRay movies etc. for home theater purposes.
The PC 5.1 surround sound systems require a audio card in a PC tower and mainly used for playing 3D games so that won't work for any Mac at all. So don't buy a PC 5.1 surround sound system for your Mac.
Harmon Kardon has the GoPlay, it's a portable stereo with awesome sound (not as good as their theater systems) and you can hook up a analog male/male stereo mini cable to it from the Mac.
$200 and it has a iPod dock and also takes like 8 batteries so it's portable.
http://www.amazon.com/dp/B002GHBTNC
There is also the Bose Wave clock/radio, you will need a stereo mini to RCA break out cable for that.
http://www.bose.com/controller?url=/shop_online/wave_systems/index.jsp
The GoPlay has much better sound than the Bose, I think the Bose are overpriced.

Problem during startup of NWDS - Error while opening NWDS -

Hi,
iam unable to start up NWDS.problem during startup of NWDS
Error when double click the NWDS to open.
Error in .log file of workshop[--
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Dec 03, 2007 15:59:04.226
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.reflect.InvocationTargetException
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     ... 7 more
Caused by: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)
     at org.eclipse.swt.SWT.error(SWT.java:2330)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:101)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
     at org.eclipse.swt.widgets.Display.release(Display.java:1782)
     at org.eclipse.swt.graphics.Device.dispose(Device.java:212)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1390)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     ... 8 more

Hi nayab,
                 Ur workspace metadata seems to be corrupted. Go to ur workspace. rename .metadata folder & open the NWDS. It will not show ur previous configuration so u have to import the Development configuration again. In case ur any activity is open, it will come back when u import the Development Configuration.
regards
Sumit

"Program files" directory problem during Microsoft Office Customization Installer in non-English versions of Windows

We have a document-level customization solution for Word and are experiencing problems during deployment in an environment running on terminal services. The OS (Windows 2012) is English and Word (2013) is non-English (German).
Installation is done into the "Program Files" folder correctly. But when trying to start a word document linked to the specific template. The "Microsoft Office Customization Installer" pops up with the error.
"There was an error during installation"
From: file:///C:/Programme/[CompanyName]/[Productname]/[Productname].vsto
Downloading file:///c:/Programme/[CompanyName]/[Productname]/[Productname].vsto did not succeed.
Exception: ....
System.Deployment.Application.DeploymentDonwloadException: Download file:///C:/Programme/[Companyname]/Productname]/[Productname].vsto did not suceed. ---> System.Net.WebException: Could not find a part of the path 'C:\Programme\[Companyname]\[Productname]\[Productname].vsto'.
---> System.Net.WebException: ...... ---> System.IO.DirectoyNotFoundException......
The problem seems to be that the installer is looking for C:\PROGRAMME instead of C:\PROGRAM FILES. C:\PROGAMME is the German localized name of PROGRAM FILES (http://en.wikipedia.org/wiki/Program_Files).
The installer installs the solution correctly deployed into c:\program files, but when the later a user tries to start it and the Microsoft Office Customization Installer is called, it tries to access the non-existing "c:\programme" folder. This
doesn't exist, because Windows is English.
Is there any thing related to deploying solutions on a platform which has different languages (mixing/matching of OS language and Office language?)
Thank you for your help

Hello,
1. First, I would confirm with you whether you dealt with the localization for your document-level add-in?
2. Did you use this way to define the Create a class that defines the post-deployment action part of Put the document of a solution
onto the end user's computer (document-level customizations only) and did you get the path with Environment.SpecialFolder enum?
To handle this, I would recommend you consider using Environment.SpecialFolder to set that property.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem During Installation of ECC 6 on Windows 2003

Here I am facing problem during Import ABAP Phase.
It is throwing Error like that::
CJS-30022 Program 'Migration Moitor' exists with return code 103.
After completeing 9 stages, it's getting problem in Import packages and installation get stucked.
My Server is like that:
OS: Windows Server 2003
Hardware: HP Itanium IA64
Database: Oracle 10.2g
SAP Release : 2004s ECC 6
I have configured Java with j2sdk 1.4.2_12:
JRE 1.5 is not available for IA64 .
I reconfigured the parameter "shared_pool_size" (to 400MB)in init<sid>.ora at \oracle\<sid>\database.
Also adjusted another parameter which is "shared_pool_reserved_size" i.e. 10% of the shared_pool_size.
What to do now.
Please send me feed backs.
Regards,
Sumanta Chatterjee
 

run 'ls -lrta' in /tmp/sapinst_instdir/.... (whatever the lowest path is there, where all the log files are). You should see something like sap<something>.tsk and sap<something>.log. Look at the most recently updated sap<something>.log file for the specific error. One problem I've seen is that if you configure the advanced oracle config to turn off AUTOEXTEND on the tablespaces, the abap load will bomb because it runs out of space. Also, make sure your SYSTEM tablespace has at least 500M.
Posting the relevant contents of the log with the detailed error description would help us provide a better answer as well.
Rich

Apple Banned me, because of a very weird problem with my "Factory Unlocked"

Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
Here's my problem. Apple has exchanged my iphone 3 times.
I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
On October 20th, i recieved my second iphone, and then a bigger problem started .
Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
1.- Telcel
2.- Movistar
3.- Unefon
OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
And every time i tried to activate it, only got this message onscreen:
http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
I though something was wrong with my brand new factory unlocked iphone 4.
I have 4 more simcards from my brothers (they all had iphone 4 too)
I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
I called apple support, and they exchange the iphone for another one.
I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
Serial numbers of the 3 iphones:
79039C0U* (this one worked great with Unefon, only problem was yellow screen)
85042GR4*
81042FJB*
What do you suggest me? any info would be really aprecciated
FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

Iphone 4, having a weird problem /: can't seem to fix it!

So i have been having my iphone for a while, i have no warranty on the phone now. I have this weird problem that when i scoll down my messages and stuff i can see the outline of the message kind of show rainbowish colors that sort of show a bit when i scroll, right near the border of the message. its kind of annoying at times, also there are times when i press the home button, right when i get to my wallpaper, the outline of the letters when i text are there like very very faint, they disappear after for a while but then come back sort of like a glitch, and i cant fix it at all. then i would see faint horizontal lines, i would notice them when i use the camera, they disappear also. can anyone help me with this or suggest something?

Screen lag is normaly the LCD itself. But try restoring the iPhone. http://support.apple.com/kb/HT1414

Problem during creation of shipment document and shipment cost document

Hi
My client facing problem during creation of shipment document and shipment cost document at the time of Batch Job
Delivery no 897654: goods issue on 30.11 at 13:22. Shipment on 30.11 (VT01N).
Shipment costs on 1.12 (VI01).
the problem is the shipment document get created on 30.11.2010 but the shipment cost document get created on 1.12.2010
pleas advice.

Hi,
Please check the batch job processing log.
As per my understanding, business requires to generate the Shipment & Shipment cost documents immediatley.
However there is some time between the documents creation time. I dont see any issue in the data or problem in the delivery docs Because system will not generate the shipment docs after 1 or 2 days if there is an issue with the data . There must be problem in the Batch Job.
Analyse the batch jobs and timing of the job process.
Let us know your feedback...
Best Regards,
MKumar

Problem during installation of Solution Manager

Hi All,
I am facing problem during the installation of solution manager. it shows following error during installation
ERROR 2010-05-21 14:39:24
FJS-00003 TypeError: this._name has no properties (in script NW_Doublestack_SCS|ind|ind|ind|ind, line 5140: ???)
ERROR 2010-05-21 14:39:25
FCO-00011 The step collect with step key |NW_Doublestack_SCS|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
Please also let me konw how much space do we require for installating the Solution manager as a central system on one drive?

Hi Chandan,
Well may be below SDN thread will help you... out ! try out with Curd Abstoss Response !!
Inst. SAP NW 2004s Java SP9 - Error FJS-00003 this._name has no properties
Hope it will work for you..as well !

Problem during installation of NW7.0 SR3 on Windows x64

Hello all,
I have a problem during the installation of a new central instance.
During the phase 38 "Install Software units", SAPINST shows that logs :
Jul 30, 2008 1:41:10 PM Info: Ending deployment prerequisites. All items are correct.
Jul 30, 2008 1:41:11 PM Info: Saved current Engine state.
Jul 30, 2008 1:41:11 PM Info: Starting: Initial deployment: Selected development component 'caf/eu/gp/model/eap'/'sap.com'/'MAIN_APL70VAL_C'/'1497904'/'5' will be deployed.
Jul 30, 2008 1:41:11 PM Info: SDA to be deployed: D:\usr\sap\PAD\DVEBMGS00\SDM\root\origin\sap.com\caf\eu\gp\model\eap\MAIN_APL70VAL_C\5\1497904\cafeugpmodeleap.sda
Jul 30, 2008 1:41:11 PM Info: Software type of SDA: J2EE
Jul 30, 2008 1:41:11 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 30, 2008 1:41:13 PM Info: Begin of log messages of the target system:
08/07/30 13:41:11 - ***********************************************************
08/07/30 13:41:12 - Start updating EAR file...
08/07/30 13:41:12 - start-up mode is lazy
08/07/30 13:41:12 - EAR file updated successfully for 250ms.
08/07/30 13:41:12 - Start deploying ...
08/07/30 13:41:12 - EAR file uploaded to server for 93ms.
08/07/30 13:41:13 - ERROR: NOT deployed. The Deploy Service returned the following error:
                     For detailed information see the log file of the Deploy Service.
                     Exception is:
                     com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
                          Nested exception is:
                          java.net.SocketException: Connection reset
                     java.net.SocketException: Connection reset
                          at java.net.SocketInputStream.read(SocketInputStream.java:168)
                          at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
                          at java.lang.Thread.run(Thread.java:534)
08/07/30 13:41:13 - ***********************************************************
Jul 30, 2008 1:41:13 PM Info: End of log messages of the target system.
Jul 30, 2008 1:41:13 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 30, 2008 1:41:13 PM Error: Aborted: development component 'caf/eu/gp/model/eap'/'sap.com'/'MAIN_APL70VAL_C'/'1497904'/'5', grouped by software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.14.0.20071210153525''/'5':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.DeployManagerException: ERROR: NOT deployed. The Deploy Service returned the following error: com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
     Nested exception is:
     java.net.SocketException: Connection reset
Exception is:
com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
     Nested exception is:
     java.net.SocketException: Connection reset
java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(SocketInputStream.java:168)
     at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
     at java.lang.Thread.run(Thread.java:534)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Jul 30, 2008 1:41:13 PM Info: Starting to save the repository
Jul 30, 2008 1:41:13 PM Info: Finished saving the repository
What can I do to validate that step ?
Thanks in advance,
Edited by: Alexandre Belgrand on Jul 30, 2008 1:48 PM

Hi,
I had same problem.i resolved it by reinstalling OS and configuring high Page file.
Please set the max and min Page file size of same value.
and also do the java memory tuning as per SAP Notes.
Regards,
Sandeep Nayak

Problem during deployment of axis (stock) examples

Hi all
I am getting problem during the deployment of stock example given in the apache site.
Even i am not getting the right response from the URL
http://localhost:8080/axis/services/Version?method=getVersion
and
http://localhost:8080/axis/EchoHeaders.jws?method=list.
I am using tomcat 4.1 and JDK1.4.
I have set all the jar files in the axisclasspath.
At the deployment i am using the commond
C:\tomcat4\webapps\axis\WEB-INF\classes>java -cp %AXISCLASSPATH% org.apache.axis.client.AdminClient -lhttp://localhost:8080/axis/services/AdminService samples\stock\deploy.wsdd
and getting fault as
Processing file samples\stock\deploy.wsdd
Exception: AxisFault
faultCode: {http://xml.apache.org/axis/}Server.NoService
faultSubcode:
faultString: The AXIS engine could not find a target service to invoke! targetService is null
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}hostname:Divyakant-verma
If anybody has solution please let me know
Thanks in advance
Divyakant Verma

I too am having the same issue and I am using the Java2WSDL and the WSDL2Java to create both the WSDL and the WSDD and I still get Server.NoService when I try to use the AdminClient to deploy the wsdd?
I have tried using both 1.2 and 1.2.1.
I am going to try to use an older verison to see if this is a bug..
If any one know the answer to this deployment problem please speak up.

Weird problem during synchronization !!!??

Similar Messages

Maybe you are looking for