Weird red line through arrows vs pointer when I try to use my mouse to grab stuff per usual

Anyone know why my screen is locked & not allowing me to move or place anything? & the cursor has a weird red line through arrows pointing in opposite directions when I try to grab anything. Uhmph

You have selected the Slip Tool.
If its not over a clip it gets the red line.
Select the Selection Tool (V) for placing moving around etc. of clips.

Similar Messages

  • I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

    I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

    How are you trying to transfer it and what are your setting on iTunes.  I'm not on a computer that has iTunes at the moment so I'm going from memory and similar issue.  If iTunes is set to sync music then I don't think you can select and drag, if set to manual manage music then you can.  Also make sure you are dragging to music on the iPhone.
    Hope this helps

  • My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume.  I have been in system prefrences to check all the sound settings and everything is set properly.  What do I need to do to fix this. Help!

    My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume.  I have been in system prefrences to check all the sound settings and everything is set properly.  What do I need to do to fix this. Help!

    Though I have doubts for success, you might try a SMC reset.  It can do no harm.  Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
    http://support.apple.com/kb/HT3964
    Ciao.

  • I get /Volumes/Untitled is not a valid volume mount point when I try to use teminal to make bootable usb stick

    I get /Volumes/Untitled is not a valid volume mount point when I try to use teminal to make bootable usb stick. Why and what do I do to fix this. Very frustrating. Thanks for any help. Btw, I went through all the steps properly more than once to fomat and partition etc.
    John

    FYI
    my process just completed:  here is what I see when it is done... (the first you saw in my earlier post.  It took about 15-20 minutes.
    To continue we need to erase the disk at /Volumes/Recovery.
    If you wish to continue type (Y) then press return: y
    Erasing Disk: 0%... 10%... 20%... 30%...100%...
    Copying installer files to disk...
    Copy complete.
    Making disk bootable...
    Copying boot files...
    Copy complete.
    Done.

  • 8800, battery symbol with red line through it. Won't boot. Please help!!!

    I recently bought a 8800 and when I inserted a battery, all I got was a battery symbol with a red line through it on a dim screen.  I changed batteries, tried to charge it via USB and from a wall outlet to no avail.  I tried cleaning the contacts and tried uploading t a new  OS, but it wont recognize the phone being connected when it actually is.    I am at the end of my rope with this phone and can't figure out what else to do.  Is it just gone? Please help me 
    Solved!
    Go to Solution.

    Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
    If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Powerbook G4 OSX 10.2 red line through screen

    Does anyone know what or why I would have a vertical thin red line through the screen..top to bottom; and is it serious? can it be fixed? What does it mean...
    soni

    Soni:
    It is helpful when we know which PB G4 you have. However, your thin vertical red line may be failing backlight lamp. If that is the case you don't need to worry about it, unless you want it gone. If it is convenient make an appointment at the Genius Bar and have them take a look at no cost to you.
    cornelius

  • My Blackberry does not start up, all I get is a red line through the battery

    Hi this is my first Blackberry and seven months after purchace I phone stops working. All I get when I turn it on is a red line through the battery. I bought a new battery and the same thing. I am like at wits end, HELP!

    #1. Be patient with #2.
    #2. Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
    Message Edited by JSanders on 08-02-2009 11:18 PM
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Weird red lines on the NTSC display

    After I upgraded to Final Cut Studio, my Final Cut Pro started to show these weird red lines over the image on the NTSC display. It happens very often too, like every other time I pause the timeline. They are bright red lines over the video, and the patterns vary. Anyone know what this is and how to fix it? it's very disturbing.
    I've also noticed that the image on the NTSC display doesn't update when I move the cursor around with the mouse, or in my case - the tablet pen. In other words, the image on the NTSC display stays the same until I play and pause again. This also happens way too often. Anyone else having this problem?
    Powermac G5 2GHz DP   Mac OS X (10.4.4)   Final Cut 5.0.3, Compressor 2.0.1, DVD SP 4, QT 7.0.3

    When the going gets weird, the weird trash their preferences, repair permissions and run Disk Warrior on their drives.
    rh

  • I am unable to drag any playlists to my ipod- the circle with red line through it shows up- what is up ?

    I am unable to drag any playlists to my ipod- the circle with red line through it shows up and precludes it from being accepted- what is up ?

    Though I have doubts for success, you might try a SMC reset.  It can do no harm.  Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
    http://support.apple.com/kb/HT3964
    Ciao.

  • Contacts have a red line through them

    I have a contact in my phone that has a red line through it and they cannot call me but I can call them.  please help me fix this problem.
    Thanxs

    If you can hook another monitor up and the line is also on it, the problem is your video card. If it's not on the other monitor it's your iMac display. Either way it's not good. Most iMac video cards are soldered onto the logic board and if it goes bad the whole board needs to be replaced and is very expensive. If it's the display it can be changed out but not cheap. Since you have a 20" and 10.5.5 it sounds like an older machine and may be time to get a new one. You need to take it to an Apple repair place to find out for sure.

  • Why do I keep getting Error 519: Server interface error" - Server interface error "no component returned from creativewidget' Line: 479 - var test = parent.add('statictext', undefined, text)  when I try to use pattern fill/scripted patterns.  I have unin

    Why do I keep getting Error 519: Server interface error" - Server interface error "no component returned from creativewidget' Line: 479 -> var test = parent.add('statictext', undefined, text)  when I try to use pattern fill/scripted patterns.  I have uninstalled and re-installed PS CC.  I have opened holding down shift to disable third party plug-ins.  I have moved 3rd party plugins to a temp location outside of ps and it still doesn't help.  It worked once, and only once and now won't work at all.

    Unless your Photoshop question has to do with a download/install error, you should ask in Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • I am unable to sign into my account through Adobe Elements 12. I can sign in on Adobe's website, and through Revel online, and through my smartphone, however when I try to sign in through Adobe Elements 12 directly, the hourglass never stops turning, and

    I am unable to sign into my account through Adobe Elements 12. I can sign in on Adobe's website, and through Revel online, and through my smartphone, however when I try to sign in through Adobe Elements 12 directly, the hourglass never stops turning, and turning.

    Hi,
    Have you tried working through this document - it does apply to Elements as well.
    Sign in, activation, or connection errors | CS5.5 and later
    If you still have problems you may need to contact the Adobe activation team - see the "Still need help?" link at the end of the document.
    Good luck
    Brian

  • When I try to use spellcheck, I get the "Cannot find the User dictionary". It has always worked in the past and when I go to choose the main dictionary, it just goes back to the same line, cannot find user dictionary.

    When I try to use spellcheck, I get the "Cannot find the User dictionary". It has always worked in the past and when I go to choose the main dictionary, it just goes back to the same line, cannot find user dictionary.

    Have you ever created a user dictionary? You have to manually create one, AppleWorks won't do for you. The user dictionary & any other dictionaries belong in the AppleWorks Essentials folder which belongs in the AppleWorks 6 folder in Applications.
    Deleting & reinstalling AppleWorks from the original disk will not delete your files unless you have saved them in the application folder. The Mac OS creates a separate Documents folder for your files & that is where the documents you created should be.
    Unless all of your documents are AppleWorks 6 word processing documents, Pages alone is not sufficient. The iWork applications - Keynote, Pages & Numbers - can only open AppleWorks 6 presentation, word processing & spreadsheet documents, respectively. They will not open any other type of AppleWorks 6 files or any AppleWorks 5 or any version of ClarisWorks files.

  • When I try to use my remote to input Wifi password, only the down arrow works...how can I fix this?

    When I try to use my  remote to inut WIFI password, only the down button on the remote works.  How can this be fixed.

    likely the microswitches inside the remote are broken and you need a new remote

  • When I try to use the clone stamp another layer of my picture is copied on the photo I'm working on.  Is this a defect or is there a tool I can use to stop it and return to normal usage of the clone stamp?

    When I try to use the clone stamp another layer of my picture is copied on the photo I'm working on.  Is this a de@@@@fect or is there a tool I can use to stop it and return to normal usage of the clone stamp?

    The "Sample Field" letters are very dim.  After punching several times the right click revels "Clone stamp mode".  The next little circle has a line through it and after several right clicks, it says: "turn on to ignore adjustment layers when cloning,"  Despite this I cannot get any kind of a response to change any of the existing entries.  Bob
    Robert Mcdonough
    [email protected]

Maybe you are looking for

  • How do I create AND USE a new iTunes account?

    Hi there, My girlfriend has finally traded in her windows (*spits*) phone for an iphone after months of me drilling it into her that her phone sucked... The problem now is that we share a PC and she wants to fill her spanking new iphone with crap mus

  • Importing CDs into iTunes

    I import one cd into iTunes, but it appears as several cds. Example: Mozart's Requiem, it consists of 14 movements, i.e. 15 tracks on my CD, but in iTunes it becomes two albums, one with tracks 1-13, one with track 14 only. Is there a method for turn

  • Weblogic and Tuxedo server : Security Audit Logs

    In our application we are using the weblogic server 7.0 and Tuxedo server 7.1 (to improve performance). When the user logged in to the application, the security logs are captured from tuxedo. Can anyone tell us, how the auditing can be enabled in sec

  • SQL Server 2008 R2 Setup Very Slow

    Hi, We have a multi-node SQL Server 2008 R2 Failover Cluster.  I've noticed that the SQL Server 2008 R2 Setup is extremely slow and that it appears to only be using 1 of the 128 "CPUs" (i.e. in Task Manager). We use this for creating new cluster grou

  • I phone photo time & date details ?

    How do I find the time and date details for photos I have taken please ? Can find the exact geographical location but no date or time details. Thanks