Weird: Signed in = no post, not signed in = post is there

I just posted my reply to this discussion using Firefox on my PC:
https://discussions.apple.com/message/23203419#5383748
When I'm signed in, I cannot see my post, but when I'm signed out, I can see my post!
This is happening on my PC in Firefox and also on my iPad in Safari.
What is happening there?

OK, thanks, I'm now posting in the Apple forums for over a year, and this is the first time that has happened to me!

Similar Messages

  • Can't signing in iMessage , (could not sign in. please check your network connection )

    I has already enter correct apple id and connect to wifi but it still can't sign in to iMessage and faceTime . the notification shown (iMessage Activation . Could not sign in. please check your network connection and try again )

    I GOT IT! I tried all of the other things people suggestions and nothing worked for me. Don't change your DNS.
    I had to back up all of my everything, turn off facetime and iMessage, and reset my entire phone under settings>general>reset>erase all content and settings. back sure you back up contacts, pictures, apps, etc. on iCloud and your apple ID because it will all be gone. then configure your phone at sq. 1, and in the first couple steps you're gonna wanna skip registering your apple ID, and then move along until you're at the home page. then go to settings, turn on facetime, turn on iMessaging, try to log in. It should work after your phone has reconfigured. then go ahead, once iMessage is working, log into iCloud and your Apple ID so that you get all your **** back. I really hope this helped... blood, sweat and tears went into the process of finding this answer..

  • Invoice posting not permissible after posting MIGO

    Dear Experts
    I don't want to make MIGO ( Goods Receipt ) after making Invoice (MIRO) date.
    Suggest me steps for the same.
    Regards
    viral.

    Hi Viral,
    You need to incorporate the logic of "System should not allow while doing the MIRO before the Posting date of GRN posting date in the enhancement"
    The logic is to take the GR document number from the table DRSEG-LFBNR - Document No. of a Reference Document,  retreive the GR posting date from table MKPF, compare the same with the Invoice Posting date. if the invoicing posting date is smaller than the GR posting date then give the error message as "System should not allow while doing the MIRO before the Posting date of GRN posting date" if it is not then no message.This will be applicable only if GR-Based IV is flagged in the PO line item or else the invoices without GR's will not be posted.
    You will need an ABAPer to develop the same in the sytem.
    U may write the above code in
    Exit Function Module : EXIT_SAPLMRMP_010
    Include : ZXM08U16
    Regards,
    Kiran

  • OS X 10.8.3 iMessege Sign into apple ID error - "Could Not Sign Into iMessege"

    Hi! I'm just new to apple. When I try and sign into iMessege I get an error "Could not sign into iMessege" "Could not sign into iMessege please check your network connection and try again."
    Any suggestions? Im on Mountian Lion OS X 10.8.3.
    Thanks.

    FaceTime, Game Center, Messages: Troubleshooting sign in issues

  • Could Not Sign In to App Store from iPad

    I am unable to sign into the App Store from both my iPad Air and my iPhone 4.
    When I enter the password, the following error message appears:
    Could Not Sign In
    FATAL::Unable to process your request. Please try again.
    I have reset the password via the Apple web site and can sign in to the web site with no issues. (evidnced by ability to post this).
    I have reset the iPad and no change.
    Get same error in iTunes Store.
    Any suggestions would be appreciated.
    Thank you,
    Tim

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    If nothing above has helped, try here >  iOS: Troubleshooting Wi-Fi networks and connections

  • When I try to sign in with my Apple ID and password, it says I can not sign in.  To check my network connection and try again.

    When I try to sign in with my Apple ID and password, it says I can not sign in. To check my network connection and try again.
    I am connected to my home wifi network. Why can't I sign in??

    Not sure, but iAd Producer probably has nothing to do with this.
    Did you try posting in a forum that discusses iPhone, or FaceTime, or networking?
    I searched and this looks like the best fit : https://discussions.apple.com/community/iphone/using_iphone
    -M

  • How can i download mountain lion, if it tells me it is damaged or not signed?

    I recently bought Mountain lion and tried to download it the first time it went well, but due to a internet faiure the dowload was canceled when I tried to download it again I couldnt it said that it was either damaged or not signed... what does that even means!!!!! I want to download mountain lion as soon as possible!!!

    Means you have a corrupted DL. All I can suggest is try again or post your issue to http://www.apple.com/support/mac/app-store/contact.html?form=account and let them deal with this crappy delivery system.

  • Mapquest sign in box does not appear in Firefox but does in Internet Explorer. Why? Have disabled add ons but no luck.

    The sign in box does not show up on Mapquest when I use Firefox. If I use Internet Explorer, the sign in box appears. I disabled the Firefox add-ons thinking there might be a conflict but no luck. Mapquest support is at a dead end, too, especially with it working in IE but not in Firefox. Suggestions?

    Can you post a link to that login page or is this a pop-up window?

  • IMessage Activation could not sign in IOS 8.1.3

    I recently had to erase my phone and restore from the cloud.  After doing so, I have been unable to turn on iMessage or FaceTime.  I'm receiving an error message when I log into iMessage with my AppleID stating "iMessage Activation.  Could not sign in.  Please check your network connection and try again."
    Tons of threads out there about this.  I've tried every solution posted though.  I started simple....
    - Tried everything from http://support.apple.com/en-us/HT201422
    -  -  - Confirmed wifi and cellular connections
    -  -  - Confirmed Date & Time was set to automatically
    -  -  - Turned off, restarted, turned on
    -  -  - Confirmed latest version of IOS (8.1.3)
    Then I tried solutions from the internet...
    - Turn off IMessage, turn it back on, tried signing into iMessage
    - Turn off IMessage, put on airplane mode, turn airplane mode off, tried signing in
    - All of the above, and restarted the phone
    - Confirmed no restrictions
    - Turned off wifi, tried signing in over cellular
    - Entered correct AppleID and incorrect password, then when it prompted I entered correct password.
    - Reset all network settings,  set up wifi again, tried signing in
    - Reset ALL settings
    What perplexes me is how the phone is able to recognize my AppleID in other areas, such as the iCloud & iTunes.... it logs in just fine.  Also, if I put a bogus AppleID into iMessage, it immediately recognizes a bad password.
    Somebody please toss me a bone here.

    So far, I've called Apple support twice with no resolution.  I have another call in this morning, though I do not know what else there is left to try.
    - We've tried signing my apple id out of all my devices (ipad, ipod, etc).
    - We've tried using itunes to restore the phone
    - We've tried setting the phone up as a new phone, and signing in to only iMessage
    I speculate this is related to the latest IOS release; 8.1.3

  • I am trying to buy Mountain Lion but I am getting this message: The product distribution file could not be verified. It may be damaged or was not signed.

    I just tried to buy Mountain Lion but I am getting this message, yes, even after I reboot: The product distribution file could not be verified. It may be damaged or was not signed.
    I don't understand what this means? Is my MacBookPro too old to work with Mountain Lion?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Always search the forum before posting. This is asked at least three times just below your post.
    https://discussions.apple.com/thread/3604789?tstart=0
    https://discussions.apple.com/thread/4153268?tstart=0

  • I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, it is throwing error "The product distribution file could not be verified. It may be damaged or not signed".

    I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
    Is there anything I should do differently? Is anyone else facing the same issue?
    Kindly help.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click anywhere in the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef 
    Step 4
    ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of login items' | open -ef 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • IMessage activation fails: could not sign in

    iMessage activation fails: could not sign in. It waits for activation endlessly.
    The issue started with contacts not being available for iMessage. I ended up not being able to sign in on both Mac and iPhone. Everything works fine on my iPad though.
    Any ideas other than those posted around here? iMessage is becoming a real pain.

    If you get an error when trying to activate iMessage or FaceTime - Apple Support

  • FaceTime Activation Could not sign in

    Hi,
    i bought ipod touch 4g for facetime.
    and i can't activate it!
    it stops on ipod>settings>Facetime='FaceTime Activation, Could not sign in. Please Check your network connection and try again.'
    i have used all the solutions for facetime but all in vain.
    1) Time and date settings Check (even change them and again corrected)
    2) All Ports are open verified with simple port tester (on windows 7 off course i changed the ip address)Ports are open.
    3) My Apple id is email (not ME one) contain combination of alpha numeric,small and capital.
    4) Restore 2/3 times ios 4.2.1
    5) Tried DNS Setting to Google's 8.8.8.8,8.8.4.4
    6) Created New ID in facetime and password entered carefully!
    7) Tried 3 apple IDs (i don't like this But i wanted to run facetime)
    i also have Iphone 4 facetime works great on it! i love this feature!
    i tried to install Tango on Ipod! it installed but stops responding connecting (on Ipod touch 4), so tango also not working. i am just informing about tango. I want facetime to wrok.
    Please Help me! I think this is from Apple server side problem!
    Thanks in Advance

    You may want to ask your question under a new discussion thread so you can be the Original Poster(OP) there. You will continue to receive emails from the other threads you have posted to. I think it will allow folks responding to focus on your particular situation. Also you will have to post your troubleshooting results only once.
    Now that you are past the FaceTime login step, where are you in the troubleshooting steps in the iOS:Using FaceTime article at http://www.apple.com/support/ipad/facetime/?
    Again, if you can ask and answer in a new thread/topic, that would be great.

  • Could not sign in

    imac with 10.6.8 installed
    just installed facetime 1.0.2(166) from apple store,
    I always got this message:
    " could not sign in. please check your network connection and try again "
    my network connection is ok!
    please help

    Hi,
    In the past there have been the odd instance of people not being able to access the Preferences of iChat from the Menu.
    Deleting com.apple.ichat.plist seems to resolve this.
    In many cases the issue did not arise again so deleting this .plist became the designated "fix".
    Messages still uses the com.apple.ichat***.plists
    I have the View Options for files and folders set to include the Modified date.
    The com.apple.ichat.plist was updated more recently than com.apple.imservice.iMessage.plist
    I would be tempted to delete the first and try that then delete both if that did not work.
    I am aware that this only deals with the symptoms and not the cause.
    I would also consider either repairing the Keychain or checking that the User actually Owns it, and has permissions to Read and Write to it.
    8:31 PM      Wednesday; April 25, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I do not use or have not signed up for a MobileMe Account but I am getting duplicates in my iCal for some reason.  All discussions I read are pointing to the MobileMe being the problem but it is not.  Please help me.  There must be another reason.

    I do not use or have not signed up for a MobileMe Account but I am getting duplicates in my iCal for some reason.  All discussions I read are pointing to the MobileMe being the problem but it is not.  Please help me.  There must be another reason all my entries appear twice. 

    If you wish to submit comments to Apple, the best way is to use their feedback pages.
    http://www.apple.com/feedback/itunesapp.html
    It's not likely that anyone from Apple will see your comments here among the thousands of other posts.
    Regards.

Maybe you are looking for

  • Interface between sap to non sap using edi idoc

    hello abaper's,                      i have requirment on creating Interface program for downloading files(PO)  from Non-sap system  to sap system using EDI Idoc techniques.pls give me a good tips for this requirment.. With Regards MurugeshRajeev

  • [HELP] Reading PNG Problem?

    Hello, I got a PNG image in my game: http://img211.imageshack.us/img211/4742/effectquestgate10sb3.png When it is rendered in java, it appears like this: http://img381.imageshack.us/img381/6696/glitcheddb3.jpg Why is that? It also looks like that in p

  • SAP Standard Customizing is missing after the Add-on installation

    Dear Experts, We have an ERP 6.0 EHP4 system and it has been using for a while. We have done an AFS 6.4 Add-on implementation on top of the ERP system. We have a configuration only client 200 on the system and that was already there before we did the

  • PR Release Strategies - Different characteristics

    Hi All, I want to set up PR release so that the strategy of some release groups is triggered by username/item value, and the strategy of other release groups are triggered by cost center/item value.  I know there can be only one class per release cat

  • "No receiver is entered" in SWEL when triggered via program.

    Hi WF experts, I'm currently working on a workflow with Z business object. My WF contains a "wait for event" step. When I launch my WF directly from SWDD. It works (I verify in SWEL and i find receiver data in the details, but when i trigger the even