Were there graphics card problems with the 2006 Mac Pros?

I'm curious about the ATI 2600 graphics card issues occuring with the new Mac Pro's using Leopard...
Did this just start occuring or were people also having problems with the NVIDIA GeForce 7300GT cards on the 2006 Mac Pro's while running Tiger?
The reason I'm asking is my Dual 867 has finally given up the ghost and needs to be replaced and I have the opportunity to buy a new 2 Dual-Core 2.66GHZ Mac Pro with Tiger loaded in lieu of the newer, problem ridden models.
Thanks for your responses.

the 7300 has had no widespread problems.

Similar Messages

What is the best graphics card compatible with the original Mac Pro?

I have an original Mac Pro with dual 2.0GHz DC Xeons. It currently has a GeForce 7300. I would like to know the best Apple graphics card it can support, and the best "flashed" PC graphics card it can support. I would like to be able to play games, but it doesn't have to be on BEST settings. What are the best GPUs that are compatible with Mac Pro 1,1?
Thanks!!

You may have to work at getting the ATI HD5870 to work with a Rev 1.1 MacPro, but the 5770 should be fine. It's not as good a card as the 5870, but much faster than your original, and also a lot cheaper than the 5870! That said, neither is particularly cheap.
If you're techno savvy, you can have a much bigger choice, and can use a generic PC card and 'flash' it to work with the Mac. If you use Snow Leopard or Lion, you may get it to work straight off, as they have drivers that work on many of the PC cards.

Will the XFX Radeon R7750 2gb Core-Edition graphics card work in the 2006 mac pro?

I purchased this graphics card and was wondering if it'll work in the early 2006 model mac pro. This mac pro has 2x3GHz Dual-Core Intel xeon cpu, 4gb 667 MHz DDR2 FB-DIMM RAM, ATI Radeon X1900 XT 512MB graphics, and has OS X Lion installed. Thanks!
I also have an EVGA 600watt power supply, can this also be installed?

User Tip: Mac Pro silver tower (2006-2012) Replacement Graphics cards

Are the graphics cards offered for the new mac pro HDCP compliant??

hi are the graphics cards offered for the new mac pro hdcp compliant??

See if this helps
http://macperformanceguide.com/index_topics.html#MacPro2013

Anyone having a crashing problem with the new Mac Pro?

I have a new Mac Pro purchased in January. I bought it as a front end to my very large mp3 library (170,000 mp3s and over 2,000 mp4s; media is housed on a 12 TB QNAP NAS). Since day 1 it has been a major problem. The biggest problem I have now is random crashing--can occur any time even when I am not even using the Mac Pro, making it totally unreliable and a $5,200 paperweight.
I have had several Apple Care people working on this, but after having been passed around to 5-6 different people, they still have no solution.
Anybody having a similar problem?

As today I'm sure I'll not make the purchase again.
The more I look into this problem, the more people and articles I find about it: and it's more than a month and no update to fix the problem.
PC alternatives are far more interesting and they still give you the choice of building your machine.
Apple was amazing 15 years ago, where is the team of developpers that created the old Mac Pro?!
I want to be optimistic too, but I'm already collecting all the info on how to build an backup machine... since I'm using Adobe CC and other interchangeable softwares, there is no more problems swithcing from Mac to PC and vice-versa.
I hope there will be a third contender entering the market soon, with a dream computer on Linux. I am on mac because of its reputation 20 years ago, but times are changing and Apple vision seems very different now.
I'm afraid that WWDC will not announce a thing relevant for the MacPro or computers, we got used now to ear only about phones and tablets...

"There is a problem with the SIM card in your iPhone"

I'm getting this error when I try to activate my new iPhone 4 through iTunes:
"*There is a problem with the SIM card in your iPhone.*
To activate your iPhone with this account, you will need a new, unactivated SIM card. Please use the SIM card that was provided with your new iPhone. If you are using the new SIM card, and are unable to complete activation, you can go to an Apple Retail Store or an AT&T company owned retail store to request an unactivated SIM. If you would prefer to have a replacement SIM card sent to you via overnight mail, please call us at 1-800-MY-APPLE. We apologize for the inconvenience this has caused."
Now I've already been to AT&T and nothing they could do with the account settings would work, in fact they had never seen the issue before. They gave me a new SIM card and that did nothing as well. Finally they tried out a different SIM tray, and that still didn't work. I have a Genius Bar appointment at the Apple Store tomorrow, but I was wondering if anyone else has this problem. Do you think that the SIM reader inside the iPhone 4 is broken?

I solved a problem I had with activating my iPhone although the error message was different from yours.
I got the message "There is something wrong with your iPhone and it cannot be activated, please bring it to your nearest Apple service".
Via a Chinese forum I found out its the SIM card witch is the problem. If the serial number of the SIM has a "letter" in it it won't work. If only numbers it will work.
I now tried it with 2 SIM cards with letters and got the message over and over again. Than tried with my only numbers SIM card and it activated instantly.

What does it mean when it says there is a problem with the sim card?

What does it mean when it says there is a problem with the sim card?

Exactly that, there is a problem with the sim card.
The sim card is the little chip that links your iPad to the cellular providers network to get internet anywhere.
It may have moved in the tray and lost contact, it may have an actual issue, or it may be deactivated by your cellular service provider.
Contact them to have them look at it or your service and see if there is anything wrong with it.

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

ITunes won't upgrade to10.5. Error message "There is a problem with the Windows installer package. Contact the package vendor". I need help.

iTunes won't upgrade to10.5. I'm on 10.1.17.
When installing 10.5 it terminates with an error message "There is a problem with the Windows installer package. Contact the package vendor".
It does not provide an error code or details/description to further troubleshoot. As a result I can't upgrade my Apple devices to leverage the cloud.
Any smarts out there who could help?
Using PC Win-7 w/IE 7 (should that matter)
Thanks much

I know there's a million threads like this, but I thought I'd record my experience. I, too, was having the original poster's error when I tried to update iTunes on Windows XP. I think I was stuck on 10.
I solved it by un-installing iTunes and every other Apple app. I discovered that Apple Software Update would not un-install as its MSI file could not be found. I used the "Windows Install Cleanup" tool from Microsoft to remove Apple Software Update from the list of installed programs. Google "kb290301" for a Microsoft page that includes a download link for it. After that, I was able to install a fresh copy of iTunes 10.5.2.
I'm not sure why this app's folder and MSI were missing from my computer. I had once used Laplink PC Mover to move everything from my old computer to this one, and perhaps it missed a bit.

HT1926 can't install quicktime or itunes on windows 7 get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run

please help. Can't install quictime player or itunes on windows 7. Get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run. Have followed all the steps suggested and still no luck.

thank you for trying to help. I do not have apple software update on my computer. I have tried to install several programs so i could install it but every installation will not finish and rolls back and says no changes were made to my computer so i can't install the update. I even tried to force install as administrator but nothing works. Any help would be greatly appreciated. I have windows 7 64 bit.

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

After updating to itunes 10 i now get an error message saying there is a problem with the windows insaller package - I have tried all the suggestions but nothing works for me - have I lost all my itunes forever?

After updating to itunes 10 I now get an error message that says there is a problem with the windows installer package. I have tried all the things that others suggested but cannot download itunes at all now. Have I lost itunes forever?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

HT203200 I purchsed 2 albums and was charged for both, but only one downloaded to my Itunes account. The Billy Joel album did not even offer to download. It said there was a problem with the store at the end of the purchase.

I recieved an error message during the purchase of an album, stating there was a problem with the apple store purchase. It led me to believe that the purchase did not go through, aas it never downloaded. A susequent purchase did go through and downloaded. How dod I retrieve the lost purchase?

Have you received email receipts for them and/or do they show in your purchase history : http://support.apple.com/kb/HT2727
They might just be temporary holding charges which will disappear off your card within a few days or so.
If they do appear in your purchase history then you can try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work (or if they are 'proper' charges but nothing appears on your history) then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
For your credit card not being accepted (it is a credit card, not a debit card ?), then is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

There is a problem with the security certificate of the proxy server. Error code 18 and 38.

Hi All,
After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
Exchange 2013 on a remote location with a CA-certificate.
Outlook 2010 and 2013 on different locations, locally installed and on RDS.
When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
certificate is invalid or does not match the name of the site."
Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
- restarting mailserver and AD;
- restarting switches;
- restarting routers;
- restarting RDS, AD and all other servers;
- bypassed proxyserver for RDS;
- created a new profile;
- checked recently installed updates;
- checked certificate on mailserver;
- checked RDS on a different location, working fine.
Nothing helped, what can I do next? Please advice.
Regards.

Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
The first message can be suppressed by adding this to the Exchange config:
set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
Not completely where I want to be, any help regarding the second alert is greatly appreciated!

Were there graphics card problems with the 2006 Mac Pros?

Similar Messages

Maybe you are looking for