Western Australia out by 1 hour issue.

Hello Everyone,
As of Monday, we noticed all our BB fleet's times were an hour ahead.
As such I read KB 24267 (http://www.blackberry.com/btsc/search.do?cmd=displ​ayKC&docType=kc&externalId=KB24267) as per the link from Telstra's web site.
I uploaded the required time zone update as per the instructions, confirmed it is resident in the Blackberry but am still an hour over.
Checking the time info on the BB, it shows the Network time is correct but the device time is still one hour out.
As I have not been able to find anywhere in the KB article that it is for Western Australia, I am guessing this DST patch was NOT applicable for ourselves.
Is there another patch I need to try to allow the BB's to work?
Thank you for any help you can give me.

For anyone interested, you need to change the time to manual and the time zone to Taipei.
There does not currently seem to be a software fix from RIM.  What sucks the most is that Telstra's wombats - after speaking to about 5 different customer service officers - didn't pick up on a solution until the 5th person advised that Telstra's current "fix" is to set the time manually.

Similar Messages

  • Calendar Appointments out by 1 hour

    This seems to be a common problem but there does not seem to be a fix for it.
    The problem lies in recurring events. For example if we create a recurring event in outlook for the next 2 years and then synchronise it with the iphone it will appear in the calendar as normal however if you roll forward to November 2012 (GMT) all appointments are out by 1 hour. If you then roll forward to April 2013 Brittish Summer Time (BST) all appointments are back to their original time.
    However if you hit edit on an appointment showing the wrong time then the actual editable date and time are correct. It is the displaying of the time that is the issue.
    I have tried changing the time zone support etc but that does not fix the problem. I assume if I chose another timezone that is the same as GMT but does not have the Brittish Summer Time change this would be a workaround.
    Is there a fix for this?
    Thanks
    David

    Worked 1st time!
    Thanks.
    Now where can i get some software for the phone? What format are the presentations viewed in?

  • Drop outs every few hours

    Hi all
    hope someone can help as i am coming to the end of my tether with my BT Faster Broadband connection
    it drops out every few hours and has done for almost 2 months.  i cant watch a movie or play a game without losing connection at least once, maybe twice if i am really unlucky.
    i got a new hh5 a little while ago and was fine for a while. then the problems started - dropping 2 or 3 times a day.  contacted bt and they sent a replacement hh5. no change.  eventually in the last few days got worse and its now sometimes dropping at least a dozen times a day, rendering my connection little short of useless.
    almost convinced it was a hh5 issue as they seemed to take an age to resynch, so bought an asus dsl-n66u and crossed my fingers.
    soon enough, connection dropped again and again. 
    i have tried 3 different cables, between router and socket, removed the openreach faceplate and plugged a new filter  in to the test socket.  connected for around 4 hours and droped again.
    Connection details from the Asus, with the filter in the master socket - the same as with the openreach filter (as you can see i lost connection again not so long ago.
    DSL Driver Version
    FwVer:5.4.11.21_A_TC3095 HwVer:T14.F7_0.0
    DSL Link Status
    up
    DSL Uptime
    0days 0hours 12minutes 7seconds
    DSL Modulation
    ITU G.993.2(VDSL2)
    Annex Mode
    ANNEX_A
    SNR Down
    5.8 dB
    SNR Up
    9.7 dB
    Line Attenuation Down
    102.3 dB
    Line Attenuation Up
    12.7 dB
    Data Rate Down
    13595 kbps
    Data Rate Up
    796 kbps
    MAX Rate Down
    18232 kbps
    MAX Rate Up
    937 kbps
    POWER Down
    0.5 dbm
    POWER Up
    0.4 dbm
    CRC Down
    1
    CRC Up
    0
    The last drop out:
    2014-02-16 22:33:14 [Informational] syslog: Terminating on signal 15
    2014-02-16 22:33:14 [Informational] syslog: Connect time 82.5 minutes.
    2014-02-16 22:33:14 [Informational] syslog: Sent 3492127 bytes, received 20543118 bytes.
    2014-02-16 22:33:14 [Informational] syslog: LCP down.
    2014-02-16 22:33:15 [Informational] WAN Connection: Ethernet link down.
    2014-02-16 22:33:15 [Informational] stop_nat_rules: apply the redirect_rules!
    2014-02-16 22:33:17 [Informational] kernel: tc3262_ptm_close
    2014-02-16 22:33:17 [Informational] dnsmasq[14153]: started, version 2.52 cachesize 150
    2014-02-16 22:33:17 [Informational] dnsmasq[14153]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-I18N no-DHCP no-TFTP
    2014-02-16 22:33:17 [Informational] dnsmasq[14153]: reading /etc/resolv.conf
    2014-02-16 22:33:17 [Warning] dnsmasq[14153]: ignoring nameserver ::1 - local interface
    2014-02-16 22:33:17 [Warning] dnsmasq[14153]: ignoring nameserver 127.0.0.1 - local interface
    2014-02-16 22:33:17 [Informational] dnsmasq[14153]: read /etc/hosts - 4 addresses
    2014-02-16 22:33:21 [Informational] WAN Connection: Ethernet link up.
    2014-02-16 22:33:25 [Informational] WAN Connection: Fail to connect with some issues.
    2014-02-16 22:33:40 [Informational] kernel: nas8: starting interface.
    2014-02-16 22:33:40 [Informational] syslog: Initialize LCP.
    2014-02-16 22:33:40 [Informational] syslog: Plugin libpppoe.so loaded.
    2014-02-16 22:33:40 [Informational] syslog: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
    2014-02-16 22:33:40 [Notice] syslog: pppd 2.4.5 started by admin, uid 0
    2014-02-16 22:33:40 [Informational] syslog: LCP is allowed to come up.
    2014-02-16 22:33:41 [Informational] kernel: Link State: PVC_8 logistic interface down.
    2014-02-16 22:33:43 [Informational] kernel: tc3262_ptm_close
    2014-02-16 22:33:43 [Informational] kernel: nas8: starting interface.
    2014-02-16 22:33:44 [Informational] syslog: Initialize LCP.
    2014-02-16 22:33:44 [Informational] syslog: Plugin libpppoe.so loaded.
    2014-02-16 22:33:44 [Informational] syslog: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
    2014-02-16 22:33:44 [Notice] syslog: pppd 2.4.5 started by admin, uid 0
    2014-02-16 22:33:44 [Informational] syslog: LCP is allowed to come up.
    2014-02-16 22:33:45 [Informational] kernel: firewall_execute begin
    2014-02-16 22:33:46 [Informational] kernel: firewall_execute end
    2014-02-16 22:33:54 [Debug] kernel: nas8: no IPv6 routers present
    2014-02-16 22:33:59 [Debug] syslog: PADS: Service-Name: ''
    2014-02-16 22:33:59 [Informational] syslog: PPP session is 913
    2014-02-16 22:33:59 [Warning] syslog: Connected to a0:f3:e4:34:54:bc via interface nas8
    2014-02-16 22:33:59 [Debug] syslog: using channel 15
    2014-02-16 22:33:59 [Informational] syslog: Using interface ppp8
    2014-02-16 22:33:59 [Notice] syslog: Connect: ppp8 <--> nas8
    2014-02-16 22:33:59 [Informational] syslog: CHAP authentication succeeded: CHAP authentication success
    2014-02-16 22:33:59 [Informational] syslog: CHAP authentication success
    2014-02-16 22:33:59 [Notice] syslog: CHAP authentication succeeded
    2014-02-16 22:33:59 [Notice] syslog: peer from calling number A0:F3:E4:34:54:BC authorized
    2014-02-16 22:33:59 [Notice] syslog: local  IP address 86.139.185.229
    2014-02-16 22:33:59 [Notice] syslog: remote IP address 172.16.17.6
    2014-02-16 22:33:59 [Notice] syslog: primary   DNS address 213.120.234.26
    2014-02-16 22:33:59 [Notice] syslog: secondary DNS address 213.120.234.10
    2014-02-16 22:33:59 [Informational] kernel: firewall_execute begin
    2014-02-16 22:34:00 [Informational] kernel: firewall_execute end
    2014-02-16 22:34:00 [Informational] kernel: route_setting
    2014-02-16 22:34:00 [Informational] kernel: open /tmp/pre_lan_route.list fail
    2014-02-16 22:34:00 [Informational] kernel: open /tmp/pre_wan0_route.list fail
    2014-02-16 22:34:00 [Informational] kernel: open /tmp/pre_wan0_mroute.list fail
    2014-02-16 22:34:00 [Informational] kernel: ddns_execute(), DDNS is not enable, so remove /etc/ddns.conf.
    2014-02-16 22:34:00 [Informational] kernel: Link State: PVC_8 logistic interface up.
    2014-02-16 22:34:01 [Informational] dnsmasq[15417]: started, version 2.52 cachesize 150
    2014-02-16 22:34:01 [Informational] dnsmasq[15417]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-I18N no-DHCP no-TFTP
    2014-02-16 22:34:01 [Informational] dnsmasq[15417]: using nameserver 213.120.234.10#53(via ppp8)
    2014-02-16 22:34:01 [Informational] dnsmasq[15417]: using nameserver 213.120.234.26#53(via ppp8)
    2014-02-16 22:34:01 [Informational] dnsmasq[15417]: reading /etc/resolv.conf
    2014-02-16 22:34:01 [Warning] dnsmasq[15417]: ignoring nameserver ::1 - local interface
    2014-02-16 22:34:01 [Warning] dnsmasq[15417]: ignoring nameserver 127.0.0.1 - local interface
    2014-02-16 22:34:01 [Informational] dnsmasq[15417]: using nameserver 213.120.234.10#53(via ppp8)
    2014-02-16 22:34:01 [Informational] dnsmasq[15417]: using nameserver 213.120.234.26#53(via ppp8)
    2014-02-16 22:34:01 [Informational] dnsmasq[15417]: read /etc/hosts - 4 addresses
    2014-02-16 22:33:43 [Informational] WAN Connection: WAN was restored.
    2014-02-16 22:33:43 [Informational] start_nat_rules: apply the nat_rules(/tmp/nat_rules)!
    2014-02-16 22:34:29 [Warning] syslog: IPV6CP: timeout sending Config-Requests
    2014-02-16 22:43:25 [Informational] WEB: WEB user <admin> login
    In summary, in the last 24 (ish hours)
    2014-02-15 21:42:15 [Informational] syslog: Connect time 71.1 minutes.
    2014-02-15 22:34:15 [Informational] syslog: Connect time 50.6 minutes.
    2014-02-15 23:20:44 [Informational] syslog: Connect time 42.5 minutes.
    2014-02-16 00:11:24 [Informational] syslog: Connect time 42.7 minutes.
    2014-02-16 02:59:50 [Informational] syslog: Connect time 168.5 minutes.
    2014-02-16 06:35:57 [Informational] syslog: Connect time 213.9 minutes.
    2014-02-16 11:24:28 [Informational] syslog: Connect time 288.6 minutes.
    2014-02-16 11:26:23 [Informational] syslog: Connect time 1.7 minutes.
    2014-02-16 17:33:40 [Informational] syslog: Connect time 366.6 minutes.
    2014-02-16 21:10:53 [Informational] syslog: Connect time 217.6 minutes.
    2014-02-16 22:33:14 [Informational] syslog: Connect time 82.5 minutes.
    thanks in advance
    Darren

    Sorry, just dropped out again giving this log -
    2014-02-16 23:15:06 [Informational] syslog: Terminating on signal 15
    2014-02-16 23:15:06 [Informational] syslog: Connect time 41.5 minutes.
    2014-02-16 23:15:06 [Informational] syslog: Sent 7191878 bytes, received 30257559 bytes.
    2014-02-16 23:15:06 [Informational] syslog: LCP down.
    2014-02-16 23:15:07 [Informational] WAN Connection: Ethernet link down.
    2014-02-16 23:15:07 [Informational] stop_nat_rules: apply the redirect_rules!
    2014-02-16 23:15:08 [Informational] kernel: tc3262_ptm_close
    2014-02-16 23:15:09 [Informational] dnsmasq[450]: started, version 2.52 cachesize 150
    2014-02-16 23:15:09 [Informational] dnsmasq[450]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-I18N no-DHCP no-TFTP
    2014-02-16 23:15:09 [Informational] dnsmasq[450]: reading /etc/resolv.conf
    2014-02-16 23:15:09 [Warning] dnsmasq[450]: ignoring nameserver ::1 - local interface
    2014-02-16 23:15:09 [Warning] dnsmasq[450]: ignoring nameserver 127.0.0.1 - local interface
    2014-02-16 23:15:09 [Informational] dnsmasq[450]: read /etc/hosts - 4 addresses
    2014-02-16 23:15:12 [Informational] WAN Connection: Ethernet link up.
    2014-02-16 23:15:17 [Informational] WAN Connection: Fail to connect with some issues.
    2014-02-16 23:15:24 [Informational] WAN Connection: Ethernet link down.
    2014-02-16 23:15:41 [Informational] WAN Connection: Ethernet link up.
    2014-02-16 23:15:41 [Informational] WAN Connection: Fail to connect with some issues.
    2014-02-16 23:16:04 [Informational] kernel: nas8: starting interface.
    2014-02-16 23:16:04 [Informational] syslog: Initialize LCP.
    2014-02-16 23:16:04 [Informational] syslog: Plugin libpppoe.so loaded.
    2014-02-16 23:16:04 [Informational] syslog: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
    2014-02-16 23:16:04 [Notice] syslog: pppd 2.4.5 started by admin, uid 0
    2014-02-16 23:16:04 [Informational] syslog: LCP is allowed to come up.
    2014-02-16 23:16:04 [Informational] kernel: Link State: PVC_8 logistic interface down.
    2014-02-16 23:16:07 [Informational] kernel: tc3262_ptm_close
    2014-02-16 23:16:10 [Informational] kernel: nas8: starting interface.
    2014-02-16 23:16:10 [Informational] syslog: Initialize LCP.
    2014-02-16 23:16:10 [Informational] syslog: Plugin libpppoe.so loaded.
    2014-02-16 23:16:10 [Informational] syslog: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
    2014-02-16 23:16:10 [Notice] syslog: pppd 2.4.5 started by admin, uid 0
    2014-02-16 23:16:10 [Informational] syslog: LCP is allowed to come up.
    2014-02-16 23:16:10 [Informational] kernel: firewall_execute begin
    2014-02-16 23:16:10 [Informational] kernel: firewall_execute end
    2014-02-16 23:16:18 [Debug] kernel: nas8: no IPv6 routers present
    2014-02-16 23:16:23 [Debug] syslog: PADS: Service-Name: ''
    The OR modem is a couple of years old, not sure of the exact model as it's mounted on the wall behind a piano.  Not used it since we have the HH5 or the Asus, but as i said earlier, the same happens with the OR modem plugged in to the WAN socket on the Asus and the HH5

  • Sync with MS-Outlook-Calendar, some entries accurate, some entries out by 2 hours

    I've been using a Palm and Outlook since 2000.  While not perfect, they do syncronize nicely.
    For a PDA, I need an accurate calendar with details/notes inside of them (contacts, email, mobile telephone are secondary for me)
    I'll state again, having a small portable calendar is my #1 (I think my calendar has about 10,000 entries)
    I purchased a Curve 9320 yesterday.  Installed BB Destop S/W (but I can't tell what version? - where do I look?) on my XP laptop
    did a one way sync from MS-Outlook-2007 to BB (no way am I doing a 2 way Sync until I 100% trust BB)
    looking at my calendar entries on my BB, some are correct, some are out by 2 hours (e.g. instead of 1 pm, they say 3 pm).  Huh???
    My BB date/time, and my PC date/time are within a minute of each other
    I need to have my BB calendar accurate.  Help please???

    Hi Shaloooom:
    Thanks for your reply, hwever, both the iPhone and the computer clocks are set to Sydney, Australia. Also, the error is only occuring for a small amount of diary entries, not all of them which adds to my confusion.
    Thanks
    Garry

  • Locked out for 8 hours

    Hi I just purchased an iPhone 5, I know my apple ID and password, but forgot the answers to the security questions
    I have now been locked out for 8 hours,  so dissapointed,
    I did not have a recovery email address setup but I have done so now,  is there any way to fix the problem
    or must I wait the 8 hours to use the new iPhone5

    Go here:
    https://expresslane.apple.com/Issues.action
    Ask for assistance

  • Session time out up to # hours for Interaction center

    Hi Experts,
    I want increase the web ui session time out up to # hours. I tried using SMICM and Technical Profile. But using these options i could not achieve such long session. I tried using RZ 11 icm keep alive parameter, but the effect will apply for all the applications in the CRM WEB UI. 
    I want do this for only Interaction center application not for all other application in CRM WEB UI .
    Please help me how I can do this.
    Thanks
    Dinesh

    Hi Dinesh,
    This cannot be achieved without development enhancements to some standard SAP framework component, to introduce a "keep-alive" concept. If you are using a CMS for CTI or email integration, you need to ensure it supports keeping the communications session alive also.
    Sincerely,
    Glenn
    Glenn Abel
    Covington Creative
    www.covingtoncreative.com

  • A month ago my iPhone was stolen, I turned on Activation Lock but it never came out BUT an hour ago somehow my apple ID was changed and someone removed from the account both iPhone and iPad and the iPad was also removely wiped. Can Apple help me somehow?

    A month ago my iPhone was stolen, I turned on Activation Lock but it never came out BUT an hour ago somehow my apple ID was changed and someone removed from the account both my iPhone and iPad and the iPad was also remotely wiped. As soon as I saw it I recover the password and return the access to my iPad. But iPhone is not registered for my apple ID any longer. Can Apple help me somehow? I have all the documents and the iPhone box. Will they lock the iPhone and return me access to it. I'm sure it's been attached to another apple ID.
    PS. the apple ID I'm using on the discussons is not the hacked one.

    Try contacting the Apple account security team and ask: http://support.apple.com/kb/HT5699.

  • Need ANI details of calls landing during Out of business hours

    Hello All,
    Our Contact Center management has raised a new requirement to report with the ANI details of calls landing at any skill groups during put of business hours.
    Options that we have is
    1. Webview report - Call Type 22 and 23
    But in this, If we specify put of business timings and generate the report it will give the number of calls and not its ANI.
    2. Call detail report from our custom report application.
    Here the problem is, this report will give details of calls landing during business hours alone. The reason is that only the calls that utilizes VXML ports in CVP gets to this custom report. The calls coming in during of hours is handled at ICM level and to play the out of office hours prompt it utilizes CVP port not VXML and terminates the call.
    Is there any way to get this ANI details without having to modify this custom report much. Please assist in this. Let me know if you need any more details.

    That's pretty strange.
    Let's just see how you are doing this. Once you detect the out of hours situation in your Routing Script (either by checking a Global variable refreshed by an Admin script or by having a Time of Day node directly in the routing script), do you set a Call Type?
    Then after setting the call type, I assume you play a CVP message and Release the call. Correct?
    When you query the TCD on this call type you should only see your after hours calls. Let's look at one of the calls.
    You should see two rows in the TCD, one with the DNIS of your number on the gateway, or from the PSTN carrier, and one with the VRU transfer label (say 8111111111) - maybe that's in the DigitsDialed column, I'm not in front of an HDS database and can't check. This is all you should see for a call that comes out of hours.
    Both these legs should have the same RouterCallKey with different RouterCallKeySequenceNumbers.
    Do you see this?
    What is happening with another call at a similar time with a different RouterCallKey ? That doesn't make sense.
    Maybe you could do a query and show us the output?
    Regards,
    Geoff

  • I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?

    I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?

    Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
    Anything else I could try, or am I doomed!
    All of your help is much appreciated, thanks

  • How to find out how many hours an iMac has been running!

    Is there a way to find out how many hours an iMac has been running? I am thinking of buying a second hand iMac 20' or 21.5' as for space reasons, the actual 27' versions are too big. And of course, all adverts state "hardly never used"!!

    Hi, I think in later OSes I've seen total Machine hours in System Report or such, but on 10.4.11 right know.
    Hard Drive ON hours might be helpfull using Smart Utility...
    http://www.volitans-software.com/smart_utility.php

  • A friend can't update her iPad (1) as it times out after 12 Hours.  What would happen if she uses my pc with a faster Internet?  Will my iTunes, syncing etc get messed up with hers?

    A friend can't update her iPad (1) operating system as it keeps telling her to do, as her Internet timed out after 12 hours.  Can we use my PC with a fast Internet or will that mess up my iTunes, syncing etc?  Should she just find an apple store?

    - She can try disabling the the security software on here computer during the download and update.
    - Update the iPad on your computer will not mess up yur computer or iPad. However, she will then have to restore the iPad on her computer if she want to sync to that computer. Also, unless all the media is on your computer it will not be on her computer after the update.

  • HT5622 I am living in New Caledonia, a French Territory. How can I purchase from iTunes (ex: USA, Australia) using my card, French Issued?

    I am living in New Caledonia, a French Territory. How can I purchase from iTunes (ex: USA, Australia) using my card, French Issued?

    You can only download content(other than podcast episodes) from a country's iTunes Store if you're in that country. For paid content, you also need to supply a payment method valid in that country.
    (85658)

  • Hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

    hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

    Hi vijayanandhtkp,
    It sounds like you are getting the Connect to iTunes screen as discussed in this article.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    If so, please check out this article as linked from there.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Thank you for using Apple Support Communities.
    Nubz

  • My daughter cannot remember her passcode for her iPhone 5. She needs a phone number that is stored in the phone and cannot remember her passcode. we have tried many groups of numbers and now we are locked out for an hour each time we put in the wrong pass

    My daughter is out of the country until May. She did not take her iPhone 5 with her. Now she needs a phone number that is stored
    in the memory and cannot remember her passcode. I have tried all of the possibities that she e-mailed , but none of them work
    and now I am locked out for an hour each time I enter an invalid passcode. Help? How can I get around this to access the phone?

    Follow the instructions at http://support.apple.com/kb/HT1212

  • ICloud calendar times out by one hour

    My iCal is fine, this is where I usually enter my info.
    iCloud is one hour behind, I have entered the correct time zone. It doesn't matter where I access my iCloud from it is still out by one hour.
    I did take some screenshotsof both calendars to demonstrate but the content was not 'allowed' to be uploaded, whatever that means. Any ideas

    this is the solution fromanother post
    Well, I finally figured it out myself.  It is not very intuitive.  By double-clicking on the account name in the upper right of the main iCloud window (in one's browser), one can change the time zone.  However, by itself that will not cause anything to appear differently.  Nor will telling iCloud to refresh the calendar.  It is necessary to logout of iCloud and then log back in.  That sets all events in the right time zone.

Maybe you are looking for

  • Visual Studio - Column visibility - NOT based on a parameter

    I have several columns within a report that need to show / hide dependent upon the results of a query. I have tried using the following formula to no effect: Iif(Sum([FieldName].[Value]) = 1, True, False) I would expect this to show the column if the

  • Pdf multimedia in android

    Hi, I am creating a PDF interactive, The pdf contains text, images, audio and video and must be shown in pc machines and Tablet Devices (Android and Ios) I have tryed to export from indesign cs5 directly to PDF interactive. It works fine for Pc machi

  • Broken connector pin on my ipod

    Hi everyone, i was trying to charge my ipod (4th generation, 64GB) yesterday but it didn't work. I've noticed that one pin is folded/broken on the bottom: the charger doesn't fit. I bought the ipod on amazon from Apple... Is it going to be expensive

  • Can't Configure iPod Photo

    I have an iPod Photo 60gb. I've installed the software it came with, hard reset the iPod, installed the updater, restarted my PC a million times, but still the iPod will not configure. The dialog box comes up asking me if I want to configure the iPod

  • QuickTime Plugin ? on Safari

    I have just intstalled the new Flash 9 Player on my MacBookPro, but since it's installation a ? has appeared on the QuickTime icon when I've visted sites like http://uk.playstation.com/pdcf/index.jhtml. I have removed plugins from my Internet Plug-In