WF - Error in Material Master extension

Hello friends
I have some changes to the coding(in ABAP not BOR) related to a workflow of Material Master creation and extension, there is a Z table from where it picks the profit centre to create and extend materials.
When Profit centre is there for a plant, the workflow executes without error but when profit centre is not there then workflow is not executed, it gives the following error.
ROLLBACK WORK executed (SWP_CALLBACK_WI_DONE item 8)
ROLLBACK WORK executed (SWP_CONTINUE_WITH_NEXT_NODES item 1)
stating that it could not find agents.
I have checked in MM01 Profit centre is not a obligatory field and neither is there any check in coding for the same.
I have no idea what to do, please guide.
Thanks
Bhavna

Dear Bhavna,
Please check if you are validating Profit Center before calling agent determination. It appears that Agent Determination is linked with Profit Center.
Hope this is helpful.
Regards,
Naveen.

Similar Messages

  • UOM error in Material master.

    Hi
    When we log on to Spanish language, we are getting error in material master for Unit of measure, that the unit of measure has not been created in the language ES. But same UOM has configured in EN language and its working fine for material, while in Spanish language it appear as *** with error details,
    Could you please suggestu2026
    regards
    Vanraj

    Hi,
    Extactly you are right..you got to Logon in Languange ES and create the required UOM in t-code CUNI...
    this shuld solve the issue..try and revrt back..
    Also,In CUNI on top menu Go to-Translation-UOM here maintain Source lang to Target lan
    Reg,
    JJ
    Edited by: Jagsap on Apr 20, 2010 4:10 PM
    Edited by: Jagsap on Apr 20, 2010 4:15 PM

  • Material Master Extension

    Dear All,
              Now my requirement is to extend materials from one plant to another plant.So i used BAPI_MATERIAL_SAVEDATA which is working fine.But if I open the material in tcode MM02 then material master extension is not happening.
    even if the  material is opened , material master extension should happen.How to solve this?
    Regards,
    V.GaneshRaja.

    are u using COMMIT work in ur program or not ?
    Regards
    Peram

  • Exchange rate error in Material Master Upload (MB1C - 561)

    Hi.
    While uploading material through MB1C with movement type 561, I am getting following error
    My company code currency, material master currency is EUR but still following error is occuring.
    "Enter rate EUR / rate type M for 01.10.2010 in the system settings
    Message no. SG105
    Diagnosis
    For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
    Procedure
    Add the missing entry in the currency conversion table.
    Execute function
    You can then continue to process the commercial transaction."
    Why system is asking to maintain exchange rate for same currency?
    What are the settings that I should maintain? Thanks in advance.
    Regards
    Anand

    Hi,
    My material master currency is EUR
    Both Stock and Upload GL accounts currency is EUR
    Co COde currency is EUR
    Where else is the revevant Settings?
    Further, I uploaded one material on 25/Oct/2010 well. But when I am trying to upload the same material again on or before or after
    25/Oct/2010 system is giving exchage rate error
    What could be the remedy?
    Regards
    Anand

  • Dump Error In Material Master Transaction

    Dear Experts,
    When i am creating or changing any material master record, i am getting the below dump error while saving the material.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLC1F2" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
        The following syntax error occurred in program "SAPLC1AX " in include "%_CESPCL
         " in
        line 77:
        "Component called ATWRT already exists. ."
        The include has been created and last changed by:
        Created by: "SAP "
        Last changed by: "SAP "
        Error in the ABAP Application Program
        The current ABAP program "SAPLC1F2" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        The following syntax error was found in the program SAPLC1AX :
        "Component called ATWRT already exists. ."
    Trigger Location of Runtime Error
        Program                                 SAPLC1F2
        Include                                 LC1F2U10
        Row                                     594
        Module type                             (FUNCTION)
        Module Name                             C1F2_SUBSTANCES_SAVE_TO_DB
    Can you please help me out with this?
    Thanks,
    Praveen

    Hi,
    I have not made any changes in the Enhancements/BADIS which are related to ATWRT, but created one ZTable for linking the
    Vendor (LIFNR), Material (MATNR) & Manufacturer (ATWRT).
    Here are the additional details of the dump which i am getting in MM01/MM02 transactions for your reference.
    Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of the dump
    Can you please help me with this?
    Thanks,
    Praveen
    Edited by: Rob Burbank on Feb 2, 2011 9:29 AM

  • ERROR IN Material Master Generation (AII 4.0)

    Hi all,
    We're working with Auto ID 4.0..
    When we try to create products from R3 ECC 5.0 we find errors, the message is well sent from R3 to XI and then to AII but when the proxy is executed is thrown an ABAP exception.
    These are our errors:
    Data cannot be maintained for set type COMM_PR_UNIT
    Data cannot be maintained for set type COMM_PR_SHTEXT
    Data cannot be maintained for set type COMM_PR_GTIN
    We've done the configuration on AII about hierarchy 'AIN_BASE' and category 'AIN_MATERIAL'...
    Do we miss anything??? Please help us..
    Thanks in advance

    Hi
    we are trying to send  material master data from ERP to SAp AII system through XI. I have seen in the integration repository there are standars interface mapping and mesage mapping exists. But not clear on how to do configuration in XI nd which adapter we need to use in reciever communication channel and also the setting nede to be done in AII
    can you please help me in this? Just give me the breif description of steps that need to be followed in ERP side SAP AII side and Xi side
    thanks

  • Error in Material Master download

    Dear all,
    We are in SRM 4.0 with support pack level 11. We have revalidated our setting as per sap note 720819 as well. While downloading the material master from ECC system we are facing this error in our inbound queue.
    "Function module "CRM_DOWNLOAD_RCV_EXIT" not found"
    Kindly suggest the solution.
    Regards
    Dinesh Singh

    Hi,
    See these threads for more pointer/info:
    Re: Function module "CRM_DOWNLOAD_RCV_EXIT" not found error
    Re: ERROR MESSAGE IN SQM2
    Also see whether all the steps have been performed as mentioned in this weblog:
    How to replicate material master from R/3 to SRM
    BR,
    Disha.

  • Error in Material Master

    I am getting an error while viewing in mm03 <i><b>Sales:Sales Organixation Data</b></i>  The error is <b>"No plant-specific data exists"</b>
    Please suggest what could be possible error in maintaining the material master and necessary corrective steps.
    Thanks
    Praveen

    The error is self explainatory "No plant-specific data exists"
    Go to mm01 & maintain the date for the organizational levels you are tyying to view:
    Plant      
    Sales Org. 
    Distr. Chann

  • EAN error in material master

    Hi Everyone,
    We have an issue with International Article Number (EAN/UPC) being enetered in the material master.
    When the user enters particular EAN he gets an error which says "The EAN # may not be assigned externally"
    Message no. WE216.
    I have checked the config & it is ok. The EAN Number entered is well within the number range assigned to the particular EAN category.
    I also did a config check as per SAP note 879460 & corrected it in test sever, but still the error persists.
    Any suggestion on what may be wrong.
    Thanks.
    Akshay

    unfortunatly you did not post the EAN, as the number itself could explain some errors.
    Read OSS Note 545520 - FAQ: International Article Number (EAN/UPC)
    but the error itself explains already that you enter something manual, were SAP expects no manual entry.
    is your number range an external or internal number range?
    Edited by: Jürgen L. on Jan 11, 2011 11:16 PM

  • Material master extension for a particular material

    hi everyone,
    i got a requirement to add a customized screen for a particular material, i designed the screen and added that by going into spro. the screen is viewable now but for all materials. so could anyone tell me how to make it visible only for a particular material type.
    Thanks heaps
    Surya

    Hi mate
    double click the material type in T.code oms2 and higlight the view in user department so it will be displayed in the material master creation,if not deselect the item so it wont be available in MM01 .
    Hope this helps
    cheers
    Chellam

  • Material Master Extension to all the plants of same type

    Hi
    In the given scenario, we have  almost 200 plants where same materials are required , now when we create material master using Tcode MM01 we want to extend this material master to all the plants of same type in one go .Is it possible , if yes , how to go about it ?? please help, this is the specific customer requirment .
    ans will be rewarded
    rgds
    mojib

    Hi,
    Just go through the code
    report ZMM_FERT_CREATE_EXT_PLANT
           no standard page heading line-size 255.
    *include bdcrecx1.
    DATA : it_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE,
           it_bdcmsgcoll LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
    data : p_filex type string .
    types: BEGIN OF t_mm01,
            matnr(018),
            MAKTX(040),
            mtart(004),
            matkl(009),
            WGBEZ(020),
            bklas(004),
            vprsv(001),
            werks(004),
            vkorg(004),
            vtweg(002),
            sktof(001),
            versg(001),
            kondm(002),
            ktgrm(002),
            meins(003),
            gewei(003),
            j_1ichid(012),
            j_1isubind(001),
            j_1icapind(001),
            j_1igrxref(001),
            tragr(004),
            ladgr(004),
            mtvfp(002),
            xchpf(001),
            mtpos_mara(004),
            mtpos(004),
            ekgrp(003),
            BWTTY(010),
            meins1(003),
            meins2(003),
            meins3(003),
            sales_txt(040),
            purc_txt(040),
            mbrsh(001),
            verpr(015),
            peinh(006),
            stprs(015),
            brgew(017),
            ntgew(017),
            j_1ivalass(018),
            umrez1(006),
            umren1(006),
            umrez2(006),
            umren2(006),
            umrez3(006),
            umren3(006),
            lgort(004),
            TAXKM1(001),
            TAXKM2(001),
            HERKL(003),
            HERKR(003),
            J_1IMOOM(018),
          end of t_mm01.
    DATA : it_mm01 type table of t_mm01 with header line initial size 0.
    *Selection Screen                                              *
      SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME TITLE text-001.
                PARAMETERS: p_file like IBIPPARMS-PATH obligatory.
      SELECTION-SCREEN:END OF BLOCK B.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file .
      PERFORM get_filename.
    *START-OF-SELECTION
      START-OF-SELECTION.
       PERFORM upload_data.
       PERFORM fill_data.
    *&      Form  upload_data
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form upload_data .
    p_filex = p_file.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                      = p_filex
        FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = '#'
    *   HEADER_LENGTH                 = 0
    *   READ_BY_LINE                  = 'X'
    *   DAT_MODE                      = ' '
    *   CODEPAGE                      = ' '
    *   IGNORE_CERR                   = ABAP_TRUE
    *   REPLACEMENT                   = '#'
    *   CHECK_BOM                     = ' '
    *   NO_AUTH_CHECK                 = ' '
    * IMPORTING
    *   FILELENGTH                    =
    *   HEADER                        =
      tables
        data_tab                      = it_mm01
    EXCEPTIONS
       FILE_OPEN_ERROR               = 1
       FILE_READ_ERROR               = 2
       NO_BATCH                      = 3
       GUI_REFUSE_FILETRANSFER       = 4
       INVALID_TYPE                  = 5
       NO_AUTHORITY                  = 6
       UNKNOWN_ERROR                 = 7
       BAD_DATA_FORMAT               = 8
       HEADER_NOT_ALLOWED            = 9
       SEPARATOR_NOT_ALLOWED         = 10
       HEADER_TOO_LONG               = 11
       UNKNOWN_DP_ERROR              = 12
       ACCESS_DENIED                 = 13
       DP_OUT_OF_MEMORY              = 14
       DISK_FULL                     = 15
       DP_TIMEOUT                    = 16
       OTHERS                        = 17
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endform.                    " upload_data
    *&      Form  get_filename
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form get_filename .
    CALL FUNCTION 'F4_FILENAME'
                   EXPORTING
                     PROGRAM_NAME        = SYST-CPROG
                     DYNPRO_NUMBER       = SYST-DYNNR
    *                 FIELD_NAME          = p_file
                   IMPORTING
                     FILE_NAME           = p_file .
                   if sy-subrc NE 0  .
                      write : / 'Enter File Name'.
                   endif.
    endform.                    " get_filename
    *&      Form  fill_data
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form fill_data .
    *perform open_group.
    loop at it_mm01.
      clear it_bdcdata.
    refresh it_bdcdata.
    perform bdc_dynpro      using 'SAPLMGMM' '0060'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RMMG1-MTART'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_field       using 'RMMG1-MATNR'
                                   it_mm01-matnr.
    *                              '116100'.
    perform bdc_field       using 'RMMG1-MBRSH'
                                  'C'.
    perform bdc_field       using 'RMMG1-MTART'
                                  'FERT'.
    perform bdc_dynpro      using 'SAPLMGMM' '0070'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MSICHTAUSW-DYTXT(16)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_field       using 'MSICHTAUSW-KZSEL(03)'
                                  'X'.
    perform bdc_field       using 'MSICHTAUSW-KZSEL(05)'
                                  'X'.
    perform bdc_field       using 'MSICHTAUSW-KZSEL(06)'
                                  'X'.
    perform bdc_field       using 'MSICHTAUSW-KZSEL(07)'
                                  'X'.
    perform bdc_field       using 'MSICHTAUSW-KZSEL(09)'
                                  'X'.
    perform bdc_field       using 'MSICHTAUSW-KZSEL(10)'
                                  'X'.
    perform bdc_field       using 'MSICHTAUSW-KZSEL(13)'
                                  'X'.
    perform bdc_field       using 'MSICHTAUSW-KZSEL(16)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLMGMM' '0080'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RMMG1-VTWEG'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_field       using 'RMMG1-WERKS'
                                   it_mm01-werks.
    *                              '9010'.
    perform bdc_field       using 'RMMG1-LGORT'
                                   it_mm01-lgort.
    *                              'F901'.
    perform bdc_field       using 'RMMG1-VKORG'
                                   it_mm01-vkorg.
    *                              '1000'.
    perform bdc_field       using 'RMMG1-VTWEG'
                                   it_mm01-vtweg.
    *                              '03'.
    perform bdc_dynpro      using 'SAPLMGMM' '4000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'MAKT-MAKTX'
                                    it_mm01-maktx.
    *                              'Test ACEPHATE TECHNICAL 50kg'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MVKE-MTPOS'.
    perform bdc_field       using 'MVKE-VERSG'
                                    it_mm01-versg.
    *                              '1'.
    perform bdc_field       using 'MVKE-KONDM'
                                    it_mm01-kondm.
    *                              '03'.
    perform bdc_field       using 'MVKE-KTGRM'
                                   it_mm01-ktgrm.
    *                              '01'.
    perform bdc_field       using 'MVKE-MTPOS'
                                    it_mm01-mtpos.
    *                              'NORM'.
    perform bdc_dynpro      using 'SAPLMGMM' '4000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'MAKT-MAKTX'
                                    it_mm01-maktx.
    *                              'Test ACEPHATE TECHNICAL 50kg'.
    perform bdc_field       using 'MARC-MTVFP'
                                   it_mm01-mtvfp.
    *                              '01'.
    perform bdc_field       using 'MARC-XCHPF'
                                   it_mm01-xchpf.
    *                              'X'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MARC-LADGR'.
    perform bdc_field       using 'MARC-LADGR'
                                   it_mm01-ladgr.
    *                              '0003'.
    perform bdc_dynpro      using 'SAPLMGMM' '4004'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'MAKT-MAKTX'
                                    it_mm01-maktx.
    *                              'Test ACEPHATE TECHNICAL 50kg'.
    perform bdc_field       using 'MARC-HERKL'
                                   it_mm01-HERKL.
    *                              'IN'.
    perform bdc_field       using 'MARC-HERKR'
                                   it_mm01-HERKR.
    *                              '01'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_1IASSVAL-J_1IVALASS'.
    perform bdc_field       using 'J_1IMTCHID-J_1ICHID'
                                   it_mm01-J_1ICHID.
    *                              '2913 00 90'.
    perform bdc_field       using 'J_1IMTCHID-J_1ISUBIND'
                                    it_mm01-J_1ISUBIND .
    *                              'X'.
    perform bdc_field       using 'J_1IMTCHID-J_1ICAPIND'
                                    it_mm01-J_1ICAPIND.
    *                              'F'.
    perform bdc_field       using 'J_1IMTCHID-J_1IGRXREF'
                                     it_mm01-J_1IGRXREF .
    *                              '2'.
    if  it_mm01-J_1IVALASS <> '0'.
    perform bdc_field       using 'J_1IASSVAL-J_1IVALASS'
                                    it_mm01-J_1IVALASS.
    *                              '0'.
    endif.
    perform bdc_dynpro      using 'SAPLMGMM' '4000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'MAKT-MAKTX'
                                   it_mm01-maktx.
    *                              'Test ACEPHATE TECHNICAL 50kg'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MARC-EKGRP'.
    perform bdc_field       using 'MARC-EKGRP'
                                   it_mm01-ekgrp.
    *                              '002'.
    perform bdc_field       using 'MARC-XCHPF'
                                   it_mm01-xchpf.
    *                              'X'.
    perform bdc_dynpro      using 'SAPLMGMM' '4000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MAKT-MAKTX'.
    perform bdc_field       using 'MAKT-MAKTX'
                                   it_mm01-maktx.
    *                              'Test ACEPHATE TECHNICAL 50kg'.
    perform bdc_field       using 'MARC-STEUC'
                                   it_mm01-J_1ICHID.
    *                              '2913 00 90'.
    perform bdc_field       using 'MARC-HERKL'
                                    it_mm01-HERKL.
    *                              'IN'.
    perform bdc_field       using 'MARC-HERKR'
                                   it_mm01-HERKR.
    *                              '01'.
    perform bdc_field       using 'J_1IMTCHID-J_1ICHID'
                                   it_mm01-J_1ICHID.
    *                              '2913 00 90'.
    perform bdc_field       using 'J_1IMTCHID-J_1ISUBIND'
                                    it_mm01-J_1ISUBIND.
    *                              'X'.
    perform bdc_field       using 'J_1IMTCHID-J_1ICAPIND'
                                   it_mm01-J_1ICAPIND.
    *                              'F'.
    perform bdc_field       using 'J_1IMTCHID-J_1IGRXREF'
                                    it_mm01-J_1IGRXREF.
    *                              '2'.
    perform bdc_dynpro      using 'SAPLMGMM' '4000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MAKT-MAKTX'.
    perform bdc_field       using 'MAKT-MAKTX'
                                   it_mm01-maktx.
    *                              'Test ACEPHATE TECHNICAL 50kg'.
    perform bdc_field       using 'MARC-XCHPF'
                                    it_mm01-xchpf.
    *                              'X'.
    *perform bdc_field       using 'MARA-IPRKZ'
    *                              'D'.
    perform bdc_dynpro      using 'SAPLMGMM' '4000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'MAKT-MAKTX'
                                    it_mm01-maktx.
    *                              'Test ACEPHATE TECHNICAL 50kg'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MBEW-STPRS'.
    perform bdc_field       using 'MBEW-BKLAS'
                                    it_mm01-bklas.
    *                              '7930'.
    perform bdc_field       using 'MBEW-VPRSV'
                                    it_mm01-vprsv.
    *                              'S'.
    perform bdc_field       using 'MBEW-PEINH'
                                    it_mm01-peinh.
    *                              '1'.
    perform bdc_field       using 'MBEW-VERPR'
                                    it_mm01-verpr.
    *                              '273.75'.
    perform bdc_field       using 'MBEW-STPRS'
                                   it_mm01-stprs.
    *                              '207'.
    perform bdc_dynpro      using 'SAPLSPO1' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=YES'.
    CALL TRANSACTION 'MM01' USING it_bdcdata
                                    MODE 'A'
                                    UPDATE 'A'
                                    MESSAGES INTO it_bdcmsgcoll.
    CLEAR it_mm01.
    endloop.
    *perform bdc_transaction using 'MM01'.
    *perform close_group.
    endform.                    " fill_data
    *&      Form  bdc_dynpro
    *       text
    *      -->P_0297   text
    *      -->P_0298   text
    form bdc_dynpro  USING prog scr.
    CLEAR it_bdcdata.
      it_bdcdata-program = prog.
      it_bdcdata-dynpro  = scr.
      it_bdcdata-dynbegin = 'X'.
      APPEND it_bdcdata.
    endform.                    " bdc_dynpro
    *&      Form  bdc_field
    *       text
    *      -->P_0687   text
    *      -->P_IT_MM01_VPRSV  text
    form bdc_field  USING fnam fval.
    CLEAR it_bdcdata.
      it_bdcdata-fnam = fnam.
      it_bdcdata-fval  = fval.
      APPEND it_bdcdata.
    endform.                    " bdc_field
    Regards,
    Madhu.

  • Material Master extension to different Plants.

    I am presently using BAPI_MATERIAL_SAVEDATA to create material master in a particular plant. Is there an easy way to extend these to another plant.
    or
    Do i need to use BAPI_MATERIAL_SAVEREPLICA and pass different plant numbers in the MARC table in the initial creation itself.
    Thanks in advance

    Hi every one,
    By using bapi : Bapi_material_Savedata u can achieve it..
    u have to pass only these values to extend material from one plant to another plant.
    Example Requirement : Material 100-101 is available only in plant 1000, So lets Copy material 100-101 to a plant 1200.
    Note :  Pass values in block letters only
    In headdata structure :
    1.headdata-material           " matnr : '100-101'
    2.headdata-ind_sector       " mbrsh : 'M'
    3.headdata-matl_type        " mtart  : 'HALB'
    4.headdata-basic_view      " kzsel  : 'X'
    5.headdata-purchase_view  "kzsel  : 'X'
    In Clientdata structure :
    1.Clientdata-base_uom    " meins  : 'PC'
    In Clientdatax structure :
    1.Clientdatax-base_uom   "meins  : 'X'
    In Plantdata Structure :
    1. plantdata-plant             "werks  : '1200'
    2. plantdata-countryori     "herkl   : 'DE'
    In PlantdataX Structure :
    1. plantdataX-plant             "werks  : 'X'
    2. plantdataX-countryori     "herkl    : 'X'
    By passing above data u can extend material from one plant to another plant..

  • Error Loading Material Master Data

    Hi All, When I try to load ZMATERIAL in BW development. I am getting the below error. I am on BI 7.0. seems like bad data, but how to fix it?? any thoughts??
    in the details TAB of the monitor, I  get a red error message under
    'Transfer (IDocs and TRFC): Errors occurred '
    >>Processing (data packet): Errors occurred
    >>>Data Package 5 ( 10417 Records ) : Errors occurred
    >>>>Update ( 0 new / 0 changed ) : Errors occurred
    >>>>>Data records for package 5 selected in PSA - 1 error(s)
    >>>>>>ZMATERIAL : Data record 10416 ('000001 '): Version '000001 ' is not valid
    >>>Processing end : Errors occurred
    >>>>>Error 4 in the update

    Hi PK,
    i can give you some indications:
    This message indicate that in R/3 you have an incorrect  value and the data record indicate the key with The important information.
    When controlling the InfoObject and the transfer rule you can extract the info that you need to correct the data i think in your case you have to check the length and the character type between your infoobject in BW and the field table in R/3.
    transaction RSA1==> Infosource==> find your Infosource==> double click on your Infosource that take you to transfer rules==> and here you can check the mapping between your infoobject (ZMATERIAL) and the original field in R/3 that you have to correct.
    in the same screen under Transfer_structure/transfer_rules you can find the name of the datasource and in R/3 transaction RSO2 you can find the original table that contain the field to correct.
    when you  individualize the table and the field communicate this Info to the persons who works on R/3 and after they correct the data reload again in BW.
    i hope that this Info help you
    Bilal

  • LSMW error in material master classification uploading

    Hi,
    I'm uploading classification for materials by LSMW with a direct input
    but at the end of the uploading process I can read the following:
    Error Changing Classification Data
    Other
    ( CLAP_DDB_UPDATE_CLASSIFICATION: exception     3  )
    The Following File Was Created with the Error Records:
    RCCLBI03.ERROR
    How Can I find a list of all the exceptions ?
    Thanks!
    Best Regards

    CLAP_DDB_UPDATE_CLASSIFICATION is a function module. which is called from the batch input program RCCLBI03 that you have in your LSMW step1.
    so you can go to SE37, enter CLAP_DDB_UPDATE_CLASSIFICATION and either read the docu or directly display the FM, therein is a tab for exceptions, just count starting from top
    the third is classtype not defined

  • How to maintain material master data in plant....

    Hi all,
    while creating BOM I am getting an error "no material master data in plant'  can some one help me how to maintain the material master data in plant
    Regards,
    Balu

    Hi,
    Please check the below link for MMR creaion .
    http://web.mit.edu/sapr3/windocs/bpmdb01m.htm
    Regards,

Maybe you are looking for