What all configurations to do in SAP R/3 to send an iDOC to XI system

I want to send an idoc from an SAP R/3 ECC5.0 to an XI system Netweaver 04's.
Pls let me know the STEPS I HAVE TO DO IN MY r/3 SYSTEM .
I have created the RFC destination in R/3 and XI system but still the idoc is not going into XI system.
It would be a great help if i can get step bu step guide for the configurations i have to do in R/3 .

Hi,
First check the status , with we02
Also see the below links
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133 - Idocs not reaching XI. Not posted in the receiver SAP
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
Regards
Chilla

Similar Messages

Which all configurations you need to do in R/3 for an Idoc to file scenario

which all configurations you need to do in R/3 for an Idoc to file scenario?
Rgds
Ruchitha

Hi ruchitha thakur ,
A Summary of the Steps to be carried out to enable a SAP R/3 System send Idocs to SAP Exchange Infrastructure.
First - Maintain the Sender R/3 System:
SM59 : Create a RFC destination to XI
WE21 : Create a TRFC Port ->Specify the RFC Destination Created
BD54 : Create a Logical System for the Idoc Receiver
WE20 : Create Partner Profile ->Maintain Outbound and the Inbound Parameters
Second - Log on to XI System:
SM59 : RFC Destination for Sender System
IDX1 : Create the port to get Idoc Metadata from Sender System ( The Port Name must match the port name in the idoc header - Usually in format SAP<System ID>. eg. SAPID1 [Optional Step. Not mandatory]
IDX2 : Maintain the Idoc Metadata. This is needed only by XI, and not by other SAP systems. IDX2 is needed because XI needs to construct IDoc-XML from the IDoc. No other SAP system needs to do that.
To Enable Acknowledgement:
SXMB_ADM ->Integration Engine Configuration ->Specific Configuration ->Add New entry -> Select parameters as:
Category: RUNTIME
Parameters: ACK_SYSTEM_FAILURE
Current Value: 1
GO TO SLD:
Create Technical System: Choose WEB AS ABAP if the system is R/3 -> Define SAP SID, Installation Number and Database Host Name a Maintain message Server Details according to Sender System -> Maintain Client Details of Sender System ->Select a Installed Product for Sender System
Create Business System: Choose WEB AS ABAP if the system is R/3 -> Choose the Technical System and the client Created Before -> Choose the Installed Product -> Set:
Business System Role: Application System
Related Integration Server: Integration Server
Integration Builder
Integration Directory:
Add Business System: Adapter Specific Identifiers -> 'Logical System' identical to the 'Logical System Name' in the SLD Business System
IDoc Receiver Communication Channel: port the same as XI System IDX1
The following web-sites give u step-by-step solution to configure R/3 :
ALE configuration for pushing idocs from SAP to XI
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
How to convert an IDoc-XML structure to a flat file and vice-versa in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Introduction to IDoc-XI-File scenario and complete walk through for starters.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
IDOCs (Multiple Types) Collection in BPM
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
Step by Step Procedure of IDOC to File Scenario using BPM
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/main&
cheers!
gyanaraj
****Pls reward points if u find this useful

What are the steps to create sap apo ..plz send step by steps plzzzzzzzzzzz

what are the steps to create sap apo ..plz send step by steps plz. Iam new for these ?

what are the steps to create sap apo ..plz send step by steps plz. Iam new for these ?

What all contents should a dream SAP SD book contains

Hi Friends,
This is a kind of question which nobody would have expected on this forum but am really interested in knowing your valuable inputs to find out that what would you really love to see in a SAP SD book.
Your true inputs are highly appreciated.
Thanks
Kapil Sharma

HI,
It all depends on whom do you want to sell this book?
Like --Experienced/Fresh SAP SD consultant
         Aspiring SAP -SD consultant
         Person with or without functional experience(SD) or
         Person with or without IT Knowledge
         OR a layman
I suggest that
1)Pl. include real life scenario and its solutions.Try to cover as many as industrial sectors.pl. focus on that.If you go to any of the SAP-SD teaching institute or refer book,basic information never change.Like configuration etc....
2)Pl find out what information is missing in available books in market and SAP SD Consultant needs on their job.I have not referred any book other than supplied by SAP germany.I don't know what other books contain.
e-book would be added advantage.
thanks,
vrajesh

Without Payroll What all Modules I can Implement in SAP HR

Without Payroll What all module I can implement in SAP HR?
Asfar as my knowledge is concerned We can Time Management. Training and Event Management, Performanace Management, Recruitment & E Recruitment.
I guess For Travel Management too Payroll is required?
My Question Can I implement Personal Cost Planning without Payroll? Is it required that i needto configure Basic Wagetype that is 0008 Is that is required to configure Basic Wagetype for Personal Cost Planning?
Could you please throw some light on this?

Hi,
According to SAP help you need to implement Organizational management at least in order to be using Personnel Cost Planning.
However, depending on the functions you require you need to implement other HR submodules and integrate with Personnel Cost Planning component. For this integration considerations please check below:
Integration With Other Application Components
aFunction Required
bComponent Required
1a Include all payment-relevant information from HR master data when creating personnel cost plans
1bPersonnel Administration (PA-PA)
2a Include all payroll results when creating personnel cost plans
2b Payroll (PY)
2a Include all training costs when creating personnel cost plans
2a Include personnel cost plans when creating the budget for Training and Event Management
2b Training and Event Management (PE)
3a Include compensation guidelines for employees or planned compensation for jobs and positions when creating personnel cost plans
3a Include personnel cost plans when creating the budget for Compensation Management
3b Compensation Management (PA-CM)
4a Include personnel cost plans when generating commitment or budget data within personnel budget planning
4b Position Budgeting and Control (PA-PM-PB)
5a Include personnel cost plans in planning for the entire company
5b Controlling (CO)
6a Detailed reports, planned/actual comparisons
6b SAP Business Information Warehouse (SAP BW)
Ref: help.sap.com
Regards,
Dilek

Configure SSO Connection from SAP Enterprise Portal to BOE Server

Hi Guys,
We recently installed a BOE Server and want to connect it to our SAP Enterprise Portal. What we need is just to display the Crystal Reports via Enterprise Portal. We have set up the following:
SAP EP with AD Authentication
SAP EP configured with SNC to SAP BI7 system
SAP BOE XI 3.1 - SAP Integration Kit
BOE Server configured with SAP Authentication via SAP BI7 System
We've also set up BOE IK iviews and URL iviews pointing to existing reports in BOE. However, when we access it from EP, it prompts for a username and login to BOE. Is there a way to configure these so that there is no prompt for login to BOE server and SSO is used? Is it also possible to have a service account (e.g. domain/crystal) that will run the reports in BOE everytime a user accesses a report from SAP EP?
Let me know if this is at all possible

Hi,
You should configure InfoView for SSO first, which required infoview.xml file modification, using windows AD default authentication. If you want to utilize the OpenDocument URL for iView then you also need to configure OpenDocument.xml file for SSO also. The SAP portal must have trust relation with the SAP BW server so the Windows AD token can be authenticate with SAP BW server.
If you want crystal user to run all the report then you will lose data security. It can be done by hard coding user name and password in the report properties and database logon but the SSO capability can be accomplished only by windows AD, SAP or LDAP.
For more details check BOXI Admin guide and SAP Integration Guide.
Thanks,
Muhammad

What is the business processflow in sap xi ?

hi experts send me xi business flow.
Hi Experts
Give me the answers for this questions
what is the business processflow in sap xi ?.
where we can implement sap xi ?,
what is the prasent sap implemented compnay ladscapes in sap xi ?
what are the different technical systems are there in the landscape. (please send me the examples ).
What is your file size and how many records are there in your file ? which idoc your using ? what is business requirment for that senario ? in your project how many interfaces are developd? (Expample plase ) what is your role on the project ?
Edited by: g.praveen kumar on May 29, 2008 5:45 PM

what is the business processflow in sap xi ?.
Check this link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f79be190-0201-0010-96b9-f00ef2ac00d
Understanding message flow in XI
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
what are the different technical systems are there in the landscape.
The technical system describes the physical view and the business system the logical view, respectively.
So in most cases you must define both but while a technical system can only link to one WEB AS, more than one business systems can link to the same technical system.
Tech System - Holds the tech details like installation no, db instance.
Technical Systems are of following types:
Technical systems are application systems that are installed in your system landscape. An example of an application system is a Customer Relationship Management (CRM) server. In the SLD, there are five types of technical systems:
1.)WEBas java,
2.)Standalone JAVA
3.)Third party
4.)Web as ABAP
1) Web AS Java
Web AS Java systems consist of one or more instances and each instance is installed on a separate host. An instance itself consists of cluster nodes that can communicate with each other.
2.)Standalone Java
Standalone Java technical systems are standalone Java applications that are installed in a computer system from an administration perspective. They can also be installed as an operating system service or as a daemon
Web AS java belongs to the NetWeaver Comes with both ABAP and Java, Standalone instread comes separate from the netWeaver.
3) Third party technical sytem
It can be any of the technical sytem. let us say if you want to send a file to R/3, here the file reside in your local system. for that you can define your local system as a third party technical system.
All those machines that comes under non sap, belongs to the third party.
4.) Web AS ABAP technical systems, ranging from any SAP system to an APO server or CRM server, are based on the same Basis Component (BC), which includes the ABAP interpreter, ABAP Dictionary, ABAP Workbench, and so on. A dedicated database, which stores most of the data of the BC and the application components, is associated with the system.
Also refer : http://help.sap.com/saphelp_nw70/helpdata/en/24/8fa93e08503614e10000000a114084/content.htm
What is your file size and how many records are there in your file ? which idoc your using ?
The file size that your server can process depends on various different aspects like the server hardware sizing, total available memory form both Java and ABAP side, the kind of interfacing you are trying to achieve, if your interface needs a complex mapping etc. Although there is no correct picture on theoritical Max file size, it will depend on the specifics of your landscape.
I personally feel that, processing a 2 GB file is not a good idea as the message when converted to XML its size multiplies atleast 3.5 times to 7 times, which gets persisted at various stages of logging that the system does. You may want to consider other options like splitting the messages into smaller chunks, having no or minimal mapping and configuring the recordset per message property.
Personally in one of the implementations we have had to process a Max file size of 350MB which gets processed once a month and that too during non-peak working hours.
SAP Network Blog: SAP XI acting as a (huge) file mover
/people/alessandro.guarneri/blog/2007/02/21/sap-xi-acting-as-a-huge-file-mover
SAP Network Blog: Night Mare-Processing huge files in SAP XI
/people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
Selecting an IDOC depends on your requirement.
example: if it is purchase order then the idoc would be orders.orders05
if it is invoice,idoc would be invoic.invoic02.
Reward points if this helps
Regards
Pragathi.
Edited by: Pragathi on May 29, 2008 7:00 PM

What step is required for open sap in browser (internet explorer)

Hi All,
What is configuration is required for open sap in internet explorer,
i want to open sap gui in browser, for that what customizing is
required?.
i have ecc 6.0.
Thanks & Regards
Arpit

Hello. This blog are for 640 release, but the main steps are same, activating in SICF , publishing in SE80 , check ICM, after test service in same SICF -->
sap/bc/gui/sap/its/WEBGUI.
Running your first ITS WebGUI application in SAP NetWeaver 04 ABAP Edition - NSP
Regards.

What is the relationship between the SAP BC and XI?

Hi Friends,
What is the relationship between the SAP BC and XI?
Regards
Sam

Hi Samuel Melvin ,
The SAP BC is basically WebMethod's product supplied free of charge to SAP customers.
SAP XI is a purchased product from SAP that can be used to integrate multiple systems, you would need to contact your SAP Account rep to discuss licensing issues. You cannot download it for free from sapnet.
It is probably more relevant to discuss the comparison between these solutions based on a specific scenario, but here are some basic differences. Obviously, the foremost one being that the SAP Exchange Infrastructure (XI) belongs to the SAP Netweaver technology suite, whereas Business Connector although bundled by SAP is really a Integration tool provided by Web Methods.
Being a Netweaver solution the SAP XI is central in design and configuration. The SAP XI is really integrated as a required solution for some of new mySAP solutions like SRM. For example, the mySAP SRM business scenario for Supplier Self Services in EBP requires the implementation of SAP XI, the Business connector cannot be utilized to replace this scenario. Although the SAP Business Connector can still be utilized with SRM for all XML based communication. Both mySAP SRM and XI runs natively on the SAP WebAS Server.
The Business Connector is a point to point solution that provides messaging and routing. Currently a number of organizations using the Business Connector utilize it to communicate between its partners using XML based messaging. This can be achieved using SAP XI as well, but SAP's strategy is to utilize XI as a central hub for messaging, routing, and communication between all SAP, non-SAP systems as well as partners. As SAP XI is a relatively new solution, organizations that are looking for communicating with their partners to exchange XML based documents or other point-to-point scenarios can still utilize SAP Business connector.
Initially, when SAP announced the SAP XI, there was a notion that SAP Business Connector would be phased out and SAP XI would be the solution utilized hereon. But SAP will continue to support the Business Connector, the SAP Exchange Infrastructure will remain as the SAP's strategic integration solution. All new and or updated SAP solutions will make use of the XI for all process-centric, message based integration. As upgrades are scheduled and new solutions deployed we'll see the mandated need for XI but currently the only solution that natively requires SAP XI is mySAP SRM 2.0.
It will be interesting to see how organizations that already utilize SAP Business Connector warm up the SAP XI idea. But for the most part they will not have a choice really, as the new mySAP products are going to natively require the use of SAP XI for all process-centric integration between the different SAP solutions. But there is no reason why organizations cannot continue to utilize the SAP Business Connector for all point-to-point solutions already deployed with possibly document exchange and partner integration. Hope this helps.
These web-sites may help u in understanding XI & BC
Understanding SAP XI SEEBURGER
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
http://www.t2b.ch/Flyers/t2b%20SAP%20Xi%20Flyer.pdf
SAP Exchange Infrastructure (BC-XI)
http://help.sap.com/saphelp_srm30/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/content.htm
webMethods for SAP
http://www1.webmethods.com/PDF/webMethods_for_SAP-wp.pdf
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
cheers!
gyanaraj
****Reward points if u find this helpful

What are the pre requisites for SAP SRM7.0 DB Rrefresh?

Hi,
What are the pre requisites for SRM DB Rrefresh?
Thanks

Hello Peter,
When it comes to DB refresh you need to know what all the client dependent data which needs to be retained.
For example you need RFC connections, Variants, User master etc.
As a pre task of Database refresh you may need to export the tables which are related to this so that once the database is refreshed you need to import them.
Ensure the proper backup of production database is available. Also check all the STMS configurations which need to be retained again.
Make sure that you need to have enough disk space which can accommodate your production data in to the pre production system.
These are some of the general consideration one needs to have but again it depends on the environment on which one runs SAP systems.
Regards
Vivek

Technical configuration required to load SAP NetWeaver 2004s BI

Hello all,
I want to know the technical configuration required to load SAP NetWeaver 2004s BW. I will be using it for extraction from R/3 also. So please tell me how much should I go for in terms of
HDD:
System RAM:
Windows OS:
Your help will be highly appreciated.
Thank you.
TR.

Hi TR,
There are a base requirements for installing the BW system and then it varies on how much data you are going to extract. I suggest you start here http://service.sap.com/sizing You will find a variety of information on how to determine what you need. Then on the same site run the quicksizer.
Good Luck,
John

What's the difference between old SAP appraisal system and the new SAP appraisal system?

Hi Experts,
What's the difference between old SAP appraisal system and the new SAP appraisal system?
Can anyone shed some light please.
Thanks.

emgr_update no longer sets or gets the thesaurus from workbench. In 11 all workbench configurations are saved in IFCR configuration directly.
Hence the thesaurus entry should be added directly in version 11 Workbench as opposed to xml file in older versions.
And if you want to migrate the changes across environments then import_site script in control directory can be used.

What are the master Data in SAP SD

Hi All,
I have a question. Even though its a naive question please bear with me.
what are the master data in SAP SD.
These are the one's i know.
1) Customer Master Data
2) Material Master Data
But what i want to know is does the following ones come under master data?
1) Price master data
2) Transporters master data(we are using transportation management)
3) Route master data
4) Customer material info records
5) Credit master data(iam using credit management)
What will be the master data for Transportation management(module), CIN(country India version), credit management & rebate processing
Thanks for your valuable time & knowledge.
Regards,
Pavan

Hi Pavan,
 Just to add some more valuable information.
Organisational master data : Every company is structured in a certain way. In order to work with the SAP System your company structure has to be represented in the system. This is done with the help of various organizational structures.
Condition master data : In sales and distribution, products are sold or sent to business partners or services are performed for them. Data about the products and services as well as about the business partners is the basis for sales processing. Sales processing with the SAP R/3 System requires that the master data has been stored in the system.
Material master data : In addition to sales and distribution, other departments of the company such as accounting or materials management access the master data. The material master data is stored in a specific structure in order to allow access from these different views.
Document master data : The processing of business transactions in sales and distribution is based on the master data. In the SAP R/3 System, business transaction are stored in the form of documents. These sales and distribution documents are structured according to certain criteria so that all necessary information in the document is stored in a systematic way.
Customer Master Data : or for that matter various business partners, we maintain data for them also called as the customer master data or vendor master data like that.
Thanks & Regards
Sadhu Kishore

What is a dynamic join in SAP HANA?

What is a dynamic join in SAP HANA and how it works? Please explain me with the example , how to use it?
Message was edited by: Tom Flanagan

Hi Sree,
In very simple and basic terms:
If you have table A and B with columns C1, C2, and C3 used in multi-column join (with Dynamic join set to true) from both the tables, then depending upon which columns you select in the query, ONLY those columns will be used in the join.
For ex. if you select C1, C2 in the select statement, then the join will happen only on C1 and C2, C3 will not be used in the join criteria, even if the join definition involves all the 3 columns.
Regards,
Ravi

Why we go for SAP ?what are the benifits to implement SAP inanyorganizat?

Hi,
Why we go for SAP ?what are the benifits to implement SAP in any organization?
Early reply is highely appruciable.
Regards,
Chow.

Hi
check following link for ur doubts
http://www.sap.com/solutions/business-suite/erp/businessbenefits/index.epx
Some key points to switch to SAP is like
Focus on Business Processes
Elimination of Redundant Data (Common & Consistent Data)
Easier Corporate Consolidation
Better Managerial Control
Elimination of Interfaces
Faster reaction to changing structures
Organization/Customers/Competitors
Integration is the Key
Integration of all business modules
Major reduction in time required for accounts finalization
Easier Corporate Consolidation
Cost control Batch wise / Cost centre wise
Centralised Inventory planning and control
Reduction in Inventory carrying Costs
Best Business practices across the organisation
Elimination of redundant data
Better Managerial control
Data Integrity
Enhanced Organisational flexibility
Improvement in Personal productivity
High Data availability
Improved Order cycle time / accuracy / cost
hope this is what ur looking for
If not pls revert
Vishal...

What all configurations to do in SAP R/3 to send an iDOC to XI system

Similar Messages

Maybe you are looking for