What am I doing wrong? Photos will not print.
I finally learned a little about layers when I got CS6 on my Mac.
I bought 2 Topaz plug-ins, Adjust & Simplify.
I took 39 photos on a flash drive to the local CVS & Rite-Aid and both machines said 34 of my photos are corrupt and will not print.
What am I doing wrong?
I did change them from psd to jpeg before putting them in a desktop folder.
Could that be the problem?
Thanks, Eli
Have a look at this article in the Apple Knowledge Base and let us know if it solves your problem.
Similar Messages
-
What am I doing wrong? flv not found on server!?
I really need some help please!
Here is a step by step of what I've done:
Created a folder on my desktop. Copied .mov to this folder.
Created a new flash file (Actionscript 3.0, CS3). Saved into same
folder on desktop. Used Import Video to import .mov file
(Progressive download, etc). Video imported fine. I tested the
movie and all looks good. So then I published. I checked out the
publish previews and all look good!
So next I took my folder from my dekstop and all it's
contents (.mov, .fla, .flv, .swf, skin.swf, .html, and .js) and
uploaded to my ftp. When I go to the site nothing shows up and it
says there was one error opening the page. So then I looked at the
activity and it says the .flv is not found. But I checked AGAIN and
the .flv is in the same folder as the rest of my files.
Am I missing a step? I am very new to flash and I can't
figure out what I'm doing wrong. Can anyone help? Should I be
posting this in another forum?
Thanks!Check with your hosting provider to make sure their MIME type
is set to display the FLV format.
Chris Georgenes
Adobe Community Expert
www.mudbubble.com
www.keyframer.com
www.howtocheatinflash.com
Kirsten Vandenhouten wrote:
> I really need some help please!
>
> Here is a step by step of what I've done:
>
> Created a folder on my desktop. Copied .mov to this
folder. Created a new
> flash file (Actionscript 3.0, CS3). Saved into same
folder on desktop. Used
> Import Video to import .mov file (Progressive download,
etc). Video imported
> fine. I tested the movie and all looks good. So then I
published. I checked out
> the publish previews and all look good!
>
> So next I took my folder from my dekstop and all it's
contents (.mov, .fla,
> .flv, .swf, skin.swf, .html, and .js) and uploaded to my
ftp. When I go to the
> site nothing shows up and it says there was one error
opening the page. So then
> I looked at the activity and it says the .flv is not
found. But I checked
> AGAIN and the .flv is in the same folder as the rest of
my files.
>
> Am I missing a step? I am very new to flash and I can't
figure out what I'm
> doing wrong. Can anyone help? Should I be posting this
in another forum?
>
> Thanks!
> -
I am using Adobe Photoshop Elements 8 and trying to print photos. When I have set it all up ready for printing and press the print button a box opens with the comment "Another computer is using the printer" "The following status is the usage status of that computer" My other computer is turned off at the wall power point but I still get the message on my main computer. I tried Picasa 3 and it works fine.. Any suggestions?
Do you get an error message when trying to print from the photo tray, or does it just not print?
If the print job gets stuck in the queue, look at this document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&cc=us&dlc=en&lang=en&lc=en&product=505...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you. -
Photos will not print in color on photo paper
I was out of two colors, put new ones in, cleaned and aligned the cartridges but when I put in photo paper, they only print in black. If I copy and paste them to regular paper, it prints in color.
Hello SSBA,
Welcome to the HP Forums!
I understand you're unable to print color when using photo paper. I will do my best to assist you! First, I need to ask you some questions to clarify this issue:
1. First, I need to find out your operating system on your computer? Windows or Mac?
2. What type of printer do you have? Click here to find out: Model Number.
3. What type of photo paper are you using?
4. What program are you using on your computer?
Please verify this information and I will assist you further. Have a great night!
I worked on behalf of HP. -
I'm trying to make a ring to for iPhone and about 20 sec into the playing of the song it fades out and goes silent. What am I doing wrong? Thanks
Im not sure what garage band is, but i can tell you the way apple recommends making ringtones. Highlight a song in iTunes, right click and select get info. Goto the options tab and youll see the time lengths (write down the ending time) for the start time type in where you want the ringtone to start, ringtones can only be 30 sec long so make the ending time 30 sec later. Exit it out of the info and while song highlighted goto the "advanced" tab at the top of iTunes where you will see an option that says "create aac version". after creating the aac version you will have a duplicate song in your iTunes, change the original back to the correct time length. Take the 30 sec aac version and drag it to your desktop, right click the icon and click "preferences" You will then be able to change the name of the file which will be somethign to the effect of "songnamehere.m4a" you just change the m4a to m4r. you now have a ringtone, drag the new file to iTunes where it will pop up in a new tab labled ringtones. If you cannot change the name of the file when it is on your desktop let me know and i will give you instuctions how to be able to change it. Once you get it figured out you can use any song you have on iTunes to make a ringtone.
-
Acrobat Pro 8 will not print some graphics, any ideas?
I am printing from Word 2007 to an Acrobat Pro 8 PDF. When I do so, some of the graphics will not show up. They seem to be in the document as when I highlight them, they show they are blocked and I can actually copy the stuff by highlighting it and copying, but it will not print or display.
This seems to be a new problem, as it worked fine, then I am not sure what trigered it, but now it will not print all the graphics. The graphics are just JPGs
Note the document looks good on the screen, but when I create a PDF or print the PDF, it will not print.
I also see this a lot when I use my PrintShop Mail program, which uses Acrobat to genterate it files.
Any ideas?
Regards,
GeoffSince Acrobat is not an Apple product, you would probably be better off posting your question on Adobe's own forums as they would be geared more toward the issue than an Apple forum:
http://www.adobeforums.com -
Using Adobe Photoshop Elements 10 Editor as external editor in Aperture. The issue is once i make the changes in Photoshop it request that I save (use tiff) and the photo is not update in Aperture. What am I doing wrong?
Marianne,
how do you save? Photoshop Elements can save either versions or overwrite the original file, afaik.
You need to set the save preferences, so that it will write to the original file and not write a version. Also the filename extension should be "tiff" and not the default "tif" (I think you did that already).
Regards
Léonie -
I transferred photos from my camera to burn folder on my macbook Pro. Made a DVD from the burn folder but it will not play on my DVD player. What am I doing wrong?
How did you do this burn? Did you use a program like iDVD? A DVD player requires that the data on the DVD is recorded in the proper format: MPEG-2. A program like iDVD will do this. There are other programs available that can do the proper coding (Roxio 'Toast' for example), but iDVD has the most features and is easy to use. It is no longer available from Apple, but if you search on Amazon, you can find 'iLife 11', a suite of programs including iDVD. It will function properly on Apple's current operating system, but it cannot make a High-Definition (Blue-Ray) presentation. It is Standard Definition only, as are all regular DVD's. One good way to present photos on a TV is to make a slidesow in iPhoto, then export that slideshow to iDVD, where it will be properly formatted for a DVD player. Or, iDVD can make its own slideshow of up to 99 photos. HTH.
Frank -
Hi I don't know if I was able to send this question before but here it goes again. I'am doing a poor man's morph project on my motion 4 program, and it works great while in Motion, but once I try to import it to fcp, it will import the photos but not the optical flow fx, what am I doing wrong? I appreciate you help
Decided to use cmd A to select all the icons on the desktop and then looked for a right click option. There it was - the option to move to a folder. I now have them all in this folder which tells me it holds 157 items. Now you know why I needed to know LOL
Thought it might be of help to someone.
Cheers Mally -
I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?
Have you checked the ink cartridges and made sure the nozzles are clear? Are you able to print from outside of iPhoto with the correct color?
Try the following: make temporary copy of the library and do the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT -
I make annotations to my photos in iphoto using preview. But once I have made the annotation I do not get the photo back into the event in iphoto from which I took the photo. What am I doing wrong? I am not using aperture
For the annotations to display on the photo in iPhoto you must setup Preview as the external editor in iPhoto via iPhoto's Advanced preference pane.
After adding the annotations just do a Save. iPhoto will then recognize the change via a new modified version. You can revert to the original at any time if you want to get rid of the text.
OT -
Can not use my backup photos, what am I doing wrong?
I am having problems using the photos from my external hard drive. I switch library, and get all the thumbs up in iphoto. When I try to edit them or export in any way, I am not allowed to. This is very frustrating, can anyone tell me what I am doing wrong?
n555:
Welcome to the Apple Discussions. The "!" in the edit window indicates that iPhoto has lost the link to the original file in the Originals folder. Check in the Originals folder to make sure you have the full sized image files in there.
Did you rename or move any files/folders in the iPhoto Library folder from the Finder? That's one way to get the situation you're experiencing but it would be only for those you tampered with. Since it's the entire library then you've probably fallen victim to the damaged database file problem that hit a lot of users.
If the full sized image files are there you can try to rebuild the library as follows: launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all of the options. I'm not optimistic that the rebuild will recover your library but it's worth a try.
If the rebuild does not work you'll have to start a new library and import the image files from the damaged one as follows:
1 - rename the iPhoto Library folder that's on the external HD.
2 - launch iPhoto with the Option key depressed and, when asked, select Create a new library, navigate to the external HD and do so.
3 - with the new library open, drag the Originals folder from the old library into the open iPhoto window.
This will give you a new library with the same rolls as the old one. However you'll lose your albums, slideshows, keywords, etc.
To help protect from this type of problem in the future check out the tip at the end of my signature.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance. -
I am in Aperture -photos - browser - view. Am trying to find "Sort" by filename to elimate duplicates. I cannot find "sort in Viewer and not sure what I am doing wrong. Help
This is what the top of the Viewer should look like:
Here is the same view with the pulldown opened:
What is it that you see? Include a screenshot. -
Am signed in to Adobe and trying to edit a form. Can pull up form but it will not allow me to edit the form. What am I doing wrong?
To elaborate on what Sukrit posted, it is likely that the form is not an Acrobat forum but a Designer form or was set for distribution and is locked for editing. I suspect it was probably created in Designer and thus can only be completed in Acrobat or Reader since the PDF is really container for and XML structure and does not have the basics of a PDF document. If that is the case, you either need Designer or you can print to a new PDF and use the field recognition feature of Acrobat to recreate the form. Of course, the latter will require some editing to the form fields in most cases.
-
I am trying to print redplum coupons and I can't, help. I have updated java, adobe flash, and made sure my printer was set on default. I am not sure what I am doing wrong. I have contacted redplum and no one will help.
No Apple response??? Redplum/Valassis will not help either. I searched, using the cups error message and though it is Unbuntu, same error so maybe useful...only problem: details would not display unless I join Unbuntu forum. What a pain to do anything with my Mac or find any help. I honestly regret buying this buggy OS.
Anyway, here is what I found, FYI:
http://ubuntuforums.org/showthread.php?t=483415
As the old saying goes: when in doubt, consult the manual. The problem appears to be that I added the printer using the KDE Add Printer Wizard. It was automatically given a "socket" URI instead of an "lpd" one. When I:
- altered the printer settings at http://localhost:631 (the CUPS admin page) as instructed in the manual for the printer, and
- copied the PPD file into a second place on the hard drive (as instructed on ubunutuforums, see the link above)
..everything started working.
It's still slower than windows, but I can live with that
Probably a simple fix. Change the socket I.P. to match the printer I.P. like this:
socket://192.168.1.86:9100. The thing I'm concerned with using socket:// is that AFAIK the printer I.P. must not change. In my case I'm able to assign a static I.P. address to the printer but it's something to consider.
I found that the only thing I needed to do was change socket to lpd (and remove :9100 off the end as well). See Solving Ubuntu printer broken pipe problem (DocuPrint C525A) . BTW thanks for steering me in the right direction - very grateful.
Solving Ubuntu printer “broken pipe” problem (DocuPrint C525A)
Posted on November 25, 2008
Are you having a problem with your printer under the latest versions of Ubuntu (perhaps it worked under an older version)? Are you able to print short documents, but not longer, or more graphics-intensive, documents? (e.g. the unfortunate people at http://ubuntuforums.org/showthread.php?t=625493). Do they sit there as Processing for ages and then switch to Held? If you have the same problem I had the solution I tried may work for you too. Firstly, check your cups error log:
sudo gedit /var/log/cups/error_log
If you see anything like the following, the solution may be simple:
[Job 201] Unable to write print data: Broken pipe
PID 13359 (/usr/lib/cups/backend/socket) stopped with status 1!
System > Administration > Printing and right click on your printer, selecting Properties. Settings > Device URI
If you see something like socket://your_printer_ip_address:9100 just change socket to lpd and remove the :9100 off the end. Then click on apply.
Apparently lpd is a more modern protocol which works with most printers whereas socket is more raw (and potentially faster but riskier in a network situation). Somewhere along the line, the default Ubuntu/Gnome setup for networked printers shifted from lpd to socket. Some primitive printers will have benefited whereas a larger number of more modern printers will have suffered.
Please correct me if I am wrong (which is highly possible) but the underlying problem could be that socket may make the printer wait a long time for a large file to be processed ready for printing. Some printers, such as the Fuji Xerox DocuPrint C525A, may drop the socket if things take too long to start coming through.
Changing timeout settings might work but lpd is better than socket so it is the preferred solution in any case.
If this works for you, please leave a comment to let others know (ideally with a description of the printer and Ubuntu version). Printer may be relevant if it doesn’t support the direct stream protocol properly. NB I may take a while to let your comment through because of the volume of spam. Sorry about that.
Finally, thanks to sphilli8 for the steer in the right direction at http://ubuntuforums.org/showthread.php?p=6245626.
http://ubuntuforums.org/showthread.php?t=483415
Maybe you are looking for
-
How do I print multiple identical small images on the same sheet of paper?
I would like to know how I can produce multiple identical small images (10mm x 10mm) on the same sheet of paper? I used to be able to do this in older versions of Adobe Photoshop. Thank you.
-
How can I set up VPN in Iphone 4s
How can I set up VPN in Iphone 4s? Can anyone help me out to set up any VPN proxy in iphone 4s? which proxy is working to access restricted sites? And explain how to set it up.. Thanks..
-
'PLS-00363: expression..' error when executing a stored procedure..
Hello, I'm trying to run a PLSQL script containing an ORACLE API but its failing on compilation with the message: 'PLS-00363: expression '<expression>' cannot be used as an assignment target'. As far as I understand its connected to my IN-OUT paramet
-
How to include the pages dynamically in JSF
Hi all Below is static include <jsp:include page="../inc/sideMenu.inc"/>How to include the file dynamically Thanks Sudhakar
-
How do I archive a processed file and move
This is not our standard. Our standard is to output the extract file, then archive a copy. The reason is that a process usually comes along afterward and moves the file to another location. Also within scope of this item is the need to confirm that a