What amps are required to charge an iPhone 5s

what amps are required to charge an iPhone 5s

watt = amps *volt
this mean
amps = watt / volt
the ac charger is 5Watt and 5volt
so 1 amp
but the phone also charge at usb which in some cases is 5volt 0.5amp == 2.5watt
are you looking for how further down then 0.5 amps you can go ?
the lower the amps the slower it charges

Similar Messages

What do I need to charge an iPhone in France?

I'm planning to travel to Paris and need to know what exactly I need to charge my iPhone once I get there. Will I need a voltage converter or just a plug adapter? I've done quite a bit of Googling and can't seemed to find any detailed info on this.
Also, anyone know what the availability of wifi is like over there?
Message was edited by: Sean Robertson

Just a plug adapter so the North American plug fits into a European socket. The AC adapter that came with your iPhone works on 100-240 V and 50/60 Hz (even states that in very fine print on the adapter itself), so it works (nearly) worldwide with the proper plug adapter.
Wi-Fi availability is pretty good in urban areas.

What settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE

hai friends
what settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE
Thanks a lot
Regards
VinayKrishna

Hi Vinay,
1. For DP_PROC_TY you need to give the transaction type or R/3 document type you want to use for creating direct material POs. Could be ECDP given in the standard or copy of which you might have created.
2. For CT_PROC_TY it is either PCTR or GCTR depending what you want to create local contract or GOA.
3. TEND_TYPE can have BID, RFCR etc depending on what type of bid invitaion you want to create form sourcing cockpit or as follow on bid invitaion.
Ragards,
RRK.
Do reward points for useful answers
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM

What steps are required to configure the Payroll Tax ( USA)?

Hi All,
Please answer
What steps are required to configure the Payroll Tax ( USA)?.
Thanks in Advance
Thank you,
GKReddy.K

hi Dan
this is covered in the Rapid Clone documents -- Refreshing a Target System
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
you should run adautocfg.sh on the application tier as well. Otherwise the essential information regarding your application tier will not be registered within the database and you will not be able to connect to your database through the application.
adcfgclone will not be necessary on the application tier.
Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1
source;- https://forums.oracle.com/thread/652681
AppsMasti
Sharing is Caring

What roles are required to use Guided Procedures?

Hi ,
What roles are required to use Guided Procedures?
Thanks
Srinivas.K

Hi,
Refer this block https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3603. [original link is broken] [original link is broken] [original link is broken]
This blog is very useful to u and in this blog she is explained what roles to needed for Guided Procedure.The Composite Application Framework role is used for the Guided Procedure in the Portal.First create the user and then assign the CAF role for that user.This is way to obtain the Guided Procedure for that user.
Thanks,
satheshkumar.R

What modifications are required to make a servlet support SSL data encrypti

Hi,
What modifications are required to make a servlet support SSL data encryption?
--kumar

Hi,
What modifications are required to make a servlet
support SSL data encryption?
--kumar No modifications are required in servlet. You have to setup servlet container.

What locks are required on a table when Oracle is processing an UPDATE

What locks are required on a table when Oracle is processing an
UPDATE statement?

Welcome to the forum!
Whenever you post provide your 4 digit Oracle version.
>
What locks are required on a table when Oracle is processing an
UPDATE statement?
>
Here is a relevant quote from the 'Lock Modes' section of the doc that Ed Stevens provided
>
Assume that a transaction uses a SELECT ... FOR UPDATE statement to select a single table row. The transaction acquires an exclusive row lock and a row share table lock. The row lock allows other sessions to modify any rows other than the locked row, while the table lock prevents sessions from altering the structure of the table. Thus, the database permits as many statements as possible to execute.
>
The above describes the locks when you, the user, tells Oracle to lock the row.

GRID Control Server (OMS) - what services are required?

What services are required (and what is the startup order) on the Windows 2003 GRID Control Server (OMS). The target database is 10g on Solaris.

Hi.
I assume that you have three folders in the oms installation folder, called oms, agent and db.
You should first start the grid database on the 2003 server along with the listener from the db folder.
Than you should install the application server processes by running:
opmnctl startall from the oms\opmn\bin - folder.
Than you should start the agent by runnint agent\bin\emctl start agent
You should further start the agent on the Solaris node and verify the upload to oms:
$ORACLE_HOME/bin/emctl start agent
$ORACLE_HOME/bin/emctl status agent
Good luck
rgds
Kjell

Hyperion Planning Fusion Edition, what components are required?

Hello,
Currently we're planning to install Hyperion Planning Fusion Edition, but we're not certain what components are required if we want to use Planning with EPMA/BPMA. Can someone post a list of components/applications required?
Additionally, where from can we download Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition, v11.1.1.1.1? The documentation states that such a version exists, however we're unable to locate it on Oracle's web pages.
Thank you
Regards
Marcin Stawny

Hi,
You will need the following :-
Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.1.1.0
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.1.0 - Part 1-3
Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition Release 11.1.1.1.0
Oracle Essbase Client Release 11.1.1.1.0
Oracle Essbase Server Release 11.1.1.1.0
Oracle Hyperion Provider Services Release 11.1.1.1.0 (if you want to use SmartView)
Oracle Hyperion Planning, Fusion Edition Release 11.1.1.1.0
Oracle Hyperion Smart View for Office , Fusion Edition Release 11.1.1.1.0
You can find the files on Oracle edelivery or here
Cheers
John
http://john-goodwin.blogspot.com/
John

What Files are required to install R12 VISION with out Express selection???

Hi,
I had installed R12 before, and i could nt received any error. installation was OK,
Now i am installing in same way on diffrent machine now i am getting error
E:\oracle\....\visdb\....\temp\oradun91.cmd (Some thing like that). I think i have missed some files.
this error come at setp 1 of 5.
when 91 files unzipped successfully.
I want to know which file is missing. LOG file does not shows the name of missing of folder or directory name.
What Files are required to install R12 VISION with out Express selection on Windows server 2003.
so that i extract that file again.....
thanks a lot
regards.
kalash

Please check the following log files for any further details about the error:
1) <RDBMS ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/<MMDDHHMM>.log
2) <RDBMS ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/dbInstall.log
I assume you are using the same Stage area, so it should work fine no matter what instance you are trying to install.
What Files are required to install R12 VISION with out Express selection on Windows server 2003What do you mean by missing and required files? As stated above, you should have the complete stage area staged properly.

What ports are required to be open on a firewall for UCCX ver7 Backups

I'm trying to setup a backup location on UCCX version 7.
The backup storage location and the UCCX server are seperated by a firewall.
What ports are required to be opened on the firewall to allow the backups through to the backup location.
Can't find any info online

Try it locally on the server itself.
You just need to create a shared directory backup oon the server on C:\ drive.
\\127.0.0.1\C$\backup
This should work.
Link to port utilization guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/configuration/guide/uccx70prtuti.pdf
Regards,
Chuck
Please rate helpful posts and identify correct answers.

What changes are required for OSS note 456507

Hi All,
PLease advise me what changes are required for OSS note 456507 (Assign the function groups QOWK or ORFC in the authorization object S_RFC to tRFC/qRFC users).
Im thinking of just going with the following additions to Role
AAAB Cross Application Auth Objects
S_RFC
Activity 16
Name of RFC - *
Type of RFC - *
But wanted to check what the implications of doing such a thing were, are there any negative points that you can think of opening up the access as above, as opposed to what was suggested in the OSS note?
Your advice would be greatly appreciated.
Thanks in Advance.
Regards,
Sandhya.

Hello Sandhya,
S_RFC is needed in case of making any RFC calls.
Normally it is needed for users that are mentioned in RFC destinations.
As such mostly these users are system/communication users or super users.
Without giving access to function groups through S_RFC successful RFC call can´not be done.
Now the value of field name of RFC can be * but only for those users which are really global super users. In case you need this authorization for any selective functionality as in you case only for function groups QOWK or ORFC then you should try to restrict the access. Negatiity is only that in case of * the authorization access increases but for system or super users you dont need to worry too much really because with system/communication users no one can login and the super users will have sap_all generally. Also their passwords will be a well kept secret so that a miususe can not be made.
By global super users I mean users which are used for various types of activites.
Please award points accordingly.
Regards.
Ruchit.

What cable is required to tether from Iphone?

Hi there i will be receiving my Ipad next week and will be looking to tether my 3G signal from my Iphone. Can anyone confirm what cable is required so i can plug the Iphone into the Ipad and use the signal.
Thanks in advance.
Andy

Besides the Bluetooth and the WiFi way described above, you can use USB, i e the cable that comes with your iPhone and connect it like if you were to sync with iTunes or something.
Then it does use the computers battery though. If you have a laptop which is not connected, that will "drain" a little bit from the computers battery. If you are connected to power then there is no "issues" what so ever.
Happy tethering!
"So i can tether my 3G signal on my Iphone 4 to my ipad when i am not in a wifi area correct?"
Indeed you can! But not with any cable as far as i know. Bluetooth or Wifi!
Message was edited by: Tobias Ahl with more CORRECT tethering answers
Message was edited by: Tobias Ahl Wo did not read it all!

What settings are required for Milestone Billing ?

Please explain in detail what all settings are required in order to do milestone billing ?
Regards,
Gobind.

Hi
Milestone Billing.
1. Create New Sales Order Type, say ZOR (Copy of OR) through T.Code: VOV8
Maintain Delivery Type as LF & Billing Type As 'F1' - Order Related / 'F2' Delivery Related.
IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Header > Define Sales Documents Types
2. Assign New Sales Document Type to Sales Area, For Eg:
1000 (S.Org) / 10 (D.Channel) / 10 (Division) / ZOR (S.O Type)
IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Header > Assign Sales Area to Sales Document Type
3. Create New Item Category, say ZTAN - Copy of TAN (For delivery Related) / ZTAD - Copy of TAD (For Order realted) / ZTAS - copy of TAS (For Third Party)
Maintain as under (others remaining same)
Billing Relevance: I
Billing Plan Type: 01
IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Item > Define Item Category
4. Assign Item Category, for ex (assuming Usage & higher level item category as blank):
Sales Document Type | Item Category Group | Default Item Category
ZOR | NORM | ZTAN
ZOR | DEIN | ZTAD
ZOR | BANS | ZTAS
IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Item > Assign Item Category
Note: In the above Billing Type '01' plays the main controller for milestone billing. In Sales order, at item level, we require to maintain the billing plan.
Follow the Sales cycle as normal sales cycle for particular Scenarios
Also Refer:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/milestone+billing.

Siri would be able to tell me what planes are above me on my iPhone 5s, but not my new iPhone 6 plus

I live in Atlanta and use to love to be able to ask Siri what planes are above me right now and it would show the flights numbers and how high they are. That was on my iPhone 5s. I have had my iPhone 6 Plus for two weeks now and thought oh I haven't tried it with the new phone. So when I asked Siri to show me the planes above me right now, she does a web search! Displays articles on how Siri can show me the plans above me. I have tried to rephrase the question many ways and it still doesn't work. Anyone else have this issue and is there a fix?

Hi! I know how to help. Siri won't tell me what planes are above when I say "what planes are above me" or "Flights above". So what you have to do is you have to ask her "what commercial planes are above" I have a iPhone 5s and she wont tell me when I say "what planes are above" so I had to ask her "what commercial planes are above" hope this helps you!

What amps are required to charge an iPhone 5s

Similar Messages

Maybe you are looking for