What are some ways to do split screen?

i am looking for some ways in fcp to divide up the screen to show two / four things going on at same time, but i want them all to be in the right proportion not all squashed or streched out, i currently do a picture in picture type thing by using super impose and using wireframe to size it down. thanks for your help ....eric

can you also do things like the lower 1/2 of the screen full video and the top 1/2 split in two , or is it just 1/2 and 1/2 or however many layers you want?<<</div>
However many layers you want. Each clip can have the filter applied. If you don't plan on moving the visable are of the video around in the box, a few simple adjustments in the Motion tab will do the same thing. DH_Box just offers more options within one control panel.
-DH

Similar Messages

  • My iPhone 4S will not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

    My iPhone will
    not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

    Try resetting your network settings.
    Settings>Genenal>Reset>Reset Network Settings.

  • What are some ways to tell if my charger is frayed?

    What are some ways to tell if my charger is frayed? I plan on going to the apple store soon and asking, However I will busy for the next couple weeks. I know
    that you wont be able to say for certain, just best guesses. I am not sure if its fraying or just improper use because I bought the laptop from a small computer shop near my university. It is a late 2008 Macbook pro 15 inch(Not sure if that extra information helps but just in case ).

    vance0688 wrote:
    What are some ways to tell if my charger is frayed? I plan on going to the apple store soon and asking, However I will busy for the next couple weeks. I know
    that you wont be able to say for certain, just best guesses. I am not sure if its fraying or just improper use because I bought the laptop from a small computer shop near my university. It is a late 2008 Macbook pro 15 inch(Not sure if that extra information helps but just in case ).
    Your charger is frayed

  • What are some ways to allow downloads after a user makes payment?

    Hi everyone,
    I want to setup a web site and sell some digital documents on it. After a user makes payment, he/she will be able to download the documents. What are some popular ways to approach this goal? how to connect the payment and download efficiently and securely?
    Thanks
    Hu Lee

    Hi Haritha,
    Go to Tcode SE16, give your ODS active Table name and give width of output list as 1023.
    Now run transaction to see your data and then click Settings --> User parameters and Select ALV Grid Display.
    Now you should see and Excel Icon on top, click on it then select Table , then
    Microsoft Excel and it will open your data with all columns you want.
    I just tried for 213 columns
    Hope this helps.
    Thanks
    CK

  • What are some ways to remove shine from the face in portraits?

    What are some different methods that people use to remove shine from the face while still leaving enough for a subtle highlight? I would love to hear all the different options I have. Thanks!

    Here is one:
    Open a blank layer above the background layer
    Access the Clone Stamp Tool.
    On the tool's option bar, enter Mode: Darken  Opacity: 30%  Aligned: Checked  Sample all layers: checked
    Zoom in on the shiny area, then ALT+left click a non-shiny skin area to sample the skin. Now, paint over the shiny area

  • What are some ways to hook my imac to my tv

    I am looking for some ways to hook my G5+isight to my tv.  im not really sure what kind of cables to buy.  i would like not to have to move my comp but the only way i found for that would be the apple tv, am i right? my tv has all kinds of diff connections on it.   Thanks

    (1) Apple TV is an easy way that offers TV connection and MUCH more.  You can ask your retailer about if additional cables or wi-fi connections are needed to connect your particular Mac and television to the TV.
    (2) Alternatively, Page 38 of the User Guide that came with your iMac or can be downloaded here
    http://manuals.info.apple.com/en_US/iMacG5-iSight-Users_Guide.pdf
    has a section called "Connecting a Television, VCR, or Other Video Devices" that gives instructions for connecting your iMac to a TV's Composite or S-Video ports.
    Message was edited by: EZ Jim

  • MOV size: What are some ways to down sample .MOV files?

    Okay all, I need some suggestions––
    I want to reduce the size of .MOV files on my computer, mainly those which are in iPhoto from my iPhone 5. They appear to all be coming in as 1080p, which is certainly of no use to me. 360p is preferred.
    I want to know how I can down sample (in batch, if possible) .MOV files down to about 1/4 of their size. They need to stay where they are though so that iPhoto doesn't lose them from its library.
    Any ideas?
    –Daniel
    P.S. It would be great if I could just choose a lower sample rate for my iPhone to capture at. If anyone knows how to do that (besides third party apps), that kind of info would be great, too.

    can you also do things like the lower 1/2 of the screen full video and the top 1/2 split in two , or is it just 1/2 and 1/2 or however many layers you want?<<</div>
    However many layers you want. Each clip can have the filter applied. If you don't plan on moving the visable are of the video around in the box, a few simple adjustments in the Motion tab will do the same thing. DH_Box just offers more options within one control panel.
    -DH

  • What are some ways to prevent dust from getting into the camera of my iPhone 5?

    I have done much research on this topic but all I can find on the internet are ways to clean the camera after dust has already gotten into it. I've had to have my iPhone 5 replaced twice now because the dust has been so bad. I just got my third and I would love to be able to prevent the dust before it happens. Any tips? Thanks in advance.

    Also I'd like to mention that I have noticed many other people are having this problem with the iPhone 5's so I've got to think that somebody has figured out some sort of solution.

  • Ive tried almost EVERYTHING and i still cant track my iPod that was recently stolen. Ive called apple been all over the website and still no way of tracking it. What are some other ways!?

    Ive tried almost EVERYTHING and i still cant track my iPod that was recently stolen. Ive called apple been all over the website and still no way of tracking it. What are some other ways!?

    Only the old fashioned way, like if you lost a wallet or purse.
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • What are some options, in case someone has stolen my device

    I need help, my iPod has been stolen, what are some options u recommend me to do, I have tried to located with "find my phone app" but it only tells me is offline, responds as soon as possible

    Not really much
    lost/stolen                                      
    No app is required.                                               
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If off-line/not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • What are different ways to pass variables in a c# program?

    What are different ways to pass variables in a c# program?
    I was wondering if :
    var numbers = textBox1.Text.Split('
    .Select(int.Parse).ToArray();
    var min = numbers.Min();
    var max = numbers.Max();
    textBox2.Text = string.Format("min:
    {0} max: {1}", min, max);
    and
    private
    int[] numbers =
    new
    int[10];
     were considered passing variables and I am also interested in learning new ways.

    Hi Billst3r,
    Your examples would be considered creating variables or "instantiating" them, which basically means creating them in memory.  To pass variables, here is a brief example.
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    namespace ConsoleApplication1
    class Program
    static void Main(string[] args)
    // Declaring variables
    int num1 = 1;
    int num2 = 5;
    // Pass created variables to private method
    int answer1 = ComputeSum(num1, num2);
    // Print results
    Console.WriteLine(answer1);
    Console.ReadLine();
    private static int ComputeSum(int param1, int param2)
    // Return sum of 2 provided parameters
    return (param1 + param2);
    Best of luck.

  • VOTE FOR YOUR BEST ADDED PLUGIN.   WHAT ARE SOME PLUGINS WELL WORTH THE $$

    Always like to see peoples opinions about added plugins for logic pro.
    WHAT ARE SOME GREAT PLUGINS WELL WORTH THE MONEY?
    TYPE OF SOUND CAN BE SYNTHS/EFFECTS WHATEVER YOU LIKE.

    i've stopped using external plugins cause it always ended up with some issues :
    - plugins would have some bugs
    - plugins would need to be updated all the time, and the new version would mess up with my songs
    - automation would not work properly
    - settings would not have been saved properly with the song ...
    of course i'm exagerating but :
    - logic already has plenty of plugins all sounding well and covering everything you need
    - i don't master half of them yet
    - there's always a way to achieve the same sound of an other plugin / technic, may it be less easy
    - any of my songs could be opened with any Logic Pro 7 in the world
    - i feel like plugins are the new video games. my friend don't play video game anymore, they download plugins and rave about the latest ones. i don't need plugins to get creative, and when i have an idea of a sound or a song, i've never thought "**** i need reaktor" or anything.
    just my two cents !
    bontempi

  • What are some good visual effects programmes for the Mac?

    I have been editing with Final Cut Express since 05 and I want to be able to do fancy visual effects I cannot do with Final Cut Express so I put it to you; what are some good visual effects programmes for the Mac? I know there is Adobe After Effects but I am wondering if there are any others, including from Apple.

    Russ H wrote:
    Or does it? Because by purchasing Motion, you also get the Pro Res codecs and Animation. Will FCE be able to work with them if they're in your QT library? I think so but am not positive. I'd check with the FCE gurus in that discussion forum.
    So I half answered my own question. FCE will respect the alpha channel in a PR 4444 file. But from the limited testing I was able to to, there doesn't seem to be a way to export it ( or other flavors of PR) as a PR sequence. It renders as AIC, which is fine. FWIW, it can always be exported as Pro Res via QT Conversion, but why bother?
    However,  I now have to say – despite what I said in my first post – that I'm not 100% percent certain that the all the codecs will be available by buying Motion. I'm like 95% sure, the more I think about it. But I have too much NLE and graphics "stuff" on my systems to test it conclusively.
    Russ

  • What are some of the best iOS apps can remotely played videos, audios, photos and text files from a NAS hdd connected to Airport Extreme USB port? And how to configure this setup?

    I have already set up NAS hdd as connecting it at USB port of Airport Extreme, i also want to remotely access it from iPhone, so what's the next step? What are some of the best iOS apps can remotely played videos, audios, photos and text files from the NAS hdd and how to configure this setup?

    *Edit - I am not able to connect to the NAS when hardwired to the airport extreme.

  • What are the ways in data transfer

    Hi Experts,
    What are the ways to transfer data from SAP R/3 to SAP BW and SAP BW to SAP APO DP?
    Can anyone help me please.
    Regards
    Suvi

    Hello,
    I can only help on part of your questions, since I'm not familar with R/3 data uploading ...
    If you want to download data from BW infocube to APO DP:
    1)For CVCs, you can just use /sapapo/mc62, input POS name, click 'Create Characteristic Combinations'.
       Then select an option except 'Create manually'.
       In the 'Data Source' area, select load data from 'InfoProvider'.
       Then you can load CVCs from infocube to APO system for generation.
    2)For transactional data (key figure values), you can use /sapapo/tscube.
       Just fill in the source cube's name, version, and tagert planning area's name, version.
       Key figure assignment and characteristic assignment are also necessary.
       Specify other options as to your requirement, and you can download transactional data from BW to DP.
    Best Regards,
    Ada

Maybe you are looking for