What are steps for transitioning from my current CC team account to new CC individual account?

Hi, I can not find any info to this question. I currently have a team (company) membership that is to expire soon. I will be getting a new CC individual (educational) licence then. What are the steps to install this new license onto my computers? I can not seem to find this info anywhere. Thanks!

CN1982 wrote:
Hello myFico subscribers, How can I improve my current scores? 1-Unsecured CapOne platinum CC $1200, 1-CapOne QuickSilver Secure CC $15001- FingerHut-$500, Victoria Secret- $300. How do I use the CC for me to see the benefits from usagae. Am I suppose to use less than 15% and pay it down before the statement is generated? Or, the CC needs to report a small balance each month. Current scores: July 7, 2015EQ: 622, TU: 659, EX:637I would also ask how long you have had each card? I would also suggest making a small purchase with the cards pretty much every month or at least every other month to show that you are 'interested' in their cards. And of course, keeping an eye towards getting the QuickSilver to be unsecured, and if you use it for expenses, it should be that way in time. For the unsecured cards, you could check to see if they have a CLI request button online, or maybe a chat option to ask for an increase. I believe Cap1 is once every 6 months. I do not have any experience or knowledge about asking for a CLI on a secured card, not sure if that's possible or not. Other than that, keep everything paid on time and your scores will rise over time, as mentioned. hth ETA: The benefit to getting larger CLIs is that it will help your utilization and that as you get larger CLIs, it will promote or suggest that other CCCs also offer you a larger CLI or in the case of a new card, a larger SL. It will also happen as your scores increase. Also, Jackielee explained everything very well and I didnt mean to overwrite anything, just to supplement it.

Similar Messages

What are steps for transferring photos

How do I transfer photos and videos from my iPhone to my PC. I am connecting the two directly using USB connector on PC.

iOS: Importing personal photos and videos from iOS devices to your computer

What are steps followed in aggregation level in multiprovider

what are steps followed in aggregation level in multiprovider

I am kind of new too. But this site helped me to understand and deploy the example in weblogic.
Hope it helps you.
http://e-docs.bea.com/wls/docs81/webserv/example.html#1052582

What are steps to take music from ipad itunes and add to ipod nano?

what are steps to take music from ipad itunes and add to ipod nano?

You will need to transfer any music that you have purchased on the iPad directly from the iTunes Store app to the iTunes app on the computer to which you sync the iPod. You can do that by directly downloading the media from Apple to the computer's iTunes app or by connecting the iPad to the computer and before syncing the iPad transferring purchases that you have made to the computer's iTunes media library. One place that you will find that command is in the iTunes app's File menu.

My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for? Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?

My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for?
Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?
I do not have any VPN enabled?

Do you happen to have an Android? If so and depending on what version there is a great data usage analyse tool built-in. See if you can go to Settings -> Data Usage from there you can pick a current or previous billing cycle and then use the vertical sliders to select a date range and it will filter the usage data per app to show you exactly what app(s) were using data during that time frame.

How to create queries on multiproviders& what are steps to be taken.

Hi all,
How to create queries on multiproviders& what are steps has to be take care.
Thanks,
cheta.

Hi,
Following scenario for sample for slow moving items for multiproviders.
Slow Moving Item Scenario
You want to define a query that displays all products that have been purchased only
infrequently or not at all. In other words, the query is also display characteristic values for
which no transaction data or only low values exist for the selected period.
Procedure
In the Administrator Workbench;
1. Create a MultiProvider consisting of a revenue InfoCube, containing the InfoObject
Material (0MATERIAL), and the InfoObject 0MATERIAL. The InfoObject must be set as
an InfoProvider in InfoObject maintenance. In other words, you need to have assigned
the InfoObject to an InfoArea. (also refer to Tab Page: Master Data/texts [Ext.]).
In the BEx Analyzer:
2. Select your MultiProvider in the Query Designer.
3. Define a query that contains the InfoObject 1ROWCOUNT in the columns.
The InfoObject 1ROWCOUNT is contained in all flat InfoProviders, that is, in all
InfoObjects and ODS objects. It counts the number of records in the InfoProvider.
In this scenario, you can see from the row number display whether or nor values
from the InfoProvider InfoObject are really displayed.
4. Save the query and execute it. All values are now displayed, including those for materials
that were not purchased.
If you filter by time (0CALYEAR, for example), values from the InfoProvider
InfoObjects are not displayed since 0CALYEAR is not an attribute of
0MATERIAL. You can see this from the absence of values in the 1ROWCOUNT
column in the query. If you want to restrict by time, you need to proceed as
follows:
Constant Selection for the InfoObject
You need to set the constant selection for the 1ROWCOUNT key figure in order to be able to
set a filter by time in this query.
1. In the Query Designer, via the context menu for 1ROWCOUNT, choose Edit.
2. On the left hand half of the screen, under the data package dimension, select the
characteristic InfoProvider (0INFOPROV) and drag it into the right-hand screen area.
3. From the context menu for the InfoProvider, choose Restrict, and restrict across the
InfoProvider InfoObject.
4. Also from the context menu for the InfoProvider, choose the function Constant Selection.
5. Save the query and execute it. You can now also set a filter for a time characteristic, the
materials display remains as it was.
Displaying Slow Moving Items
If you want to display a list of slow moving items, excluding products that are selling well, you
need to proceed as follows:
1. In the Query Designer, via the context menu for 1ROWCOUNT, choose Edit.
2. Via the context menu for InfoProvider, choose the function Display Empty Values. Also
select Constant Selection.
3. Save the query and execute it. The result is that the system displays the materials for
which there was no revenue.
Displaying Products with Small Revenues
If you want to display a list of products that have not been sold or have only been selling
badly, you need to proceed as follows:
1. Set constant selection as described above, but do not select the display empty values
function.
2. In the Query Designer, define a condition for the 0MATERIAL InfoObject. Specify a value
that is to be the upper limit for a bad sale.
3. Save the query and execute it. The result is that the system displays all materials that
have not been sold or have been selling badly.
Thanks,
Sankar M

Service/Database Accounts - NT SERVICE\MSSQLSERVER & NT SERVICE\SQLSERVERAGENT - what are they for?

Hi Guys,
I’ve done a fair amount of research for this question but just cannot seem to find the answer to my question in simple, non-DBA, terms.
Server 2008 R2
SQL 2008 R2
There are 2 users in the system database logins (NT SERVICE\MSSQLSERVER, NT SERVICE\SQLSERVERAGENT) … what are they for? It appears that they
are accounts to run the corresponding Windows services but yet they cannot be selected from the list of available built-in accounts, local accounts or domain accounts.
Also, I am using a couple of domain user accounts to run the services, do I need to add them to the database? I changed the service accounts from NETWORK
SERVICE to the domain user accounts using the SQL Configuration Manger which is supposed to take care of managing the user group membership and registry changes but the domain accounts are not in the database …. The services appear to be running fine.
Thanks

In basic terms:
As you say, in the SQL Server Database Engine there are two logins;
NT SERVICE\MSSQLSERVER and NT SERVICE\SQLSERVERAGENT. The Database Engine runs in Windows as a Windows service named
MSSQLSERVER. The NT SERVICE\MSSQLSERVER login is used by the service to connect to the Database Engine. Basically, this is how it connects to itself. The SQL Server Agent runs as a Windows service named
NT SERVICE\SQLSERVERAGENT. The NT SERVICE\SQLSERVERAGENT
login is how the Windows process that is SQL Server Agent connects to the Database Engine to read the
msdb database to find out what it should do; and then do it. Both of these logins are members of the
sysadmin fixed server role, so they can do anything in the Database Engine. And they need to stay that way.
No, they can't be selected in the list of available built-in accounts, local accounts or domain accounts. This is because they are services, not accounts. They have a security identifier (SID) in Windows,
but Windows knows they aren't real users. Windows can authenticate them, but they don't have passwords that any human can use. If you run
lusrmgr.msc and look at the groups, you will see groups like
SQLServerMSSQLUser$computername$MSSQLSERVER and NT SERVICE\MSSQLSERVER
is a member of the group.
As for the account that you used to run the services, this is complicated and has changed from SQL Server 2005 to SQL Server 2008 and now again in SQL Server Code Named 'Denali'. The short answer is that
the account you specify will be used when a process tries to reach outside of the current Windows environment. But within the computer, there is a mix of authorization granted to the domain user, the service, and the Windows group
SQLServerMSSQLUser$computername$MSSQLSERVER.
The good news is that SQL Server Configuration Manager figures out all the stuff you need when you change the accounts. If you are a glutton for punishment, you can get an idea for how complicated this
is by looking at the Denali documentation where I have tried to provide more specific information. (Note this is not the same as SQL Server 2008.) You can see it at:
Configure Windows Service Accounts and Permissions
http://msdn.microsoft.com/en-us/library/ms143504(SQL.110).aspx
Rick Byham, Microsoft, SQL Server Books Online, Implies no warranty

What are the pin connections from 7764 to stepper motor drive

what are the pin connections from UMI 7764 to stepper motor drive? I use PCI 7340 controller. Third party driver is not branded, but assembled. It has 3 inputs, one for (A,A/) one for (b,b/) one for enable, apart from ground pin.

Dear enigmata,
Here is a link to the UMI Manual that describes the signal connections:
http://www.ni.com/pdf/manuals/321941b.pdf
What you really need is the documentation for the input of the "translator" mentioned on the left side of the last diagram you posted. It is still not possible to tell which of you drive inputs correspond to step and direction (or CW, CCW) because in the circuit that you posted, these signals have already been converted by other circuitry in the drive to the A, A/, B, B/ output signals for the stepper motor.
I agree with Jochen: Without the documentation you will need to test it out as he described in his last post.
Best Regards,
Nate Holmes
National Instruments

SEM BCS - Step for Load from Datastream

Hi,
What are steps to configuration "Load from DataStream".
What kind of infocube that i should use?
Thanks in advance.

Hi,
There are rather lot threads reg the issue.
For example:
Re: BCS configuration
Re: How is data loaded into the BCS cubes?
Re: Which info object should be used for Financial statement line (BPS and BCS)
Re: SEM-BCS: Load from data stream
Feel free to ask if something is not clear.

HT204406 Hello, I have songs that show they are "Waiting" for download from the cloud but they are greyed out. Some songs in one album are done others in the same album will not download. It is not a time function because i have been working on this for

Hello, I have songs that show they are "Waiting" for download from the cloud but they are greyed out. Some songs in one album are done others in the same album will not download. It is not a time function because i have been working on this for weeks. I have allowed my compter to run for days and the songs are still not accessible. I have a Match subscription and Match is working. If I click on the "Genre" link the greyed out songs show that they are ready for download from the cloud but I cannot download them. I have downloaded over 1500 other songs, so I am trying to understand what is going on here. I would appreciate any help anyone can give me.
Thanks

I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?

Trying to understand what are the parameter/output From debug SNMP timers

Hi All
I am trying to understand what are the parameter/output
From the debug SNMP timers
Output SNMP timers :
*Dec 31 11:56:27: SNMP: HC Timer 632DDE28 fired
*Dec 31 11:56:27: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
*Dec 31 11:56:32: SNMP: HC Timer 632DDE28 fired
*Dec 31 11:56:32: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
*Dec 31 11:56:37: SNMP: HC Timer 632DDE28 fired
*Dec 31 11:56:37: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
*Dec 31 11:56:38: SNMP: HC Timer 70B54A70 fired
*Dec 31 11:56:38: SNMP: HC Timer 70B54A70 rearmed, delay = 20000
70B54A70 , 632DDE28 ² what this number means.
5000 , 20000 ² why I have different delay time ( does it means that I have delay for SNMP request )

The debug messages you are seeing are related to High-Capacity (HC) timers, which manage updates to 64-bit (HC) snmp counters as defined in RFC2233.
The "fired" and "rearmed" messages indicate when each of these timers
updates ("fired") the HC snmp counters, and when they should fire next
(the "rearmed" messages). Higher speed interfaces require updates more often than lower speed interfaces, so you see two examples of that in your debug messages - 5000 ms updates vs 20000 ms update.
The numbers that are in the messages (i.e. 632DDE28 ) are internal references to the timer that has fired.
These messages do not indicate any delay in SNMP message processing, but normal SNMP operation of HC counters.

HT204382 I was attempting to upload a video to face book and decided to cancel, now I can not get the quicktime icon with Facebook icon embedded to delete? what are steps to clear desktop?

I was attempting to upload a video to face book and decided to cancel, now I can not get the quicktime icon with Facebook icon embedded to delete? what are steps to clear desktop?

A warm welcome to Apple discussions!
A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say for your processor speed? What does it say about how much RAM you have?
If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
There are a few more things we might check but this is a good start.
Awaiting your information,
Allan

What are attributes for a row?

What are attributes for a row?
Are these the column names associated with the row?

Attribute is the object-oriented term for an object's data holders. So attributes are analogous to columns in a table.
Of course, attribute also has a couple of non-OO meanings. So the answer to your question really depends upon context.
Cheers, APC

What are alternatives for passing DB credentials to rwrun/rwclient command line instead of USERID parameter?

What are alternatives for passing DB credentials to rwrun/rwclient command line instead of USERID parameter?
As per application security, the DB details should be mentioned in command line.
I am looking for alternatives which I can use?
Please help.
Regards
Gaurav Anand

If you want a database username/password for every user that runs a report, you need to include un/pw in the command.
An option that you see quite often is that Reports use a general database user to run any report. In that case you can include the un/pw of this special user in the Key Map File:
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_run013.htm#RSPUB23557
Of course, in that case you need an application in front of the call to the report to check if the user is allowed to run the report. This is how most web applications work anyway: there is one database user, and application users are maintained in the application itself.
Or you can use single sign on:
http://docs.oracle.com/cd/E24269_01/doc.11120/e24479/pbr_sso002.htm#RSPUB23512

Transitioned from an older G5 Pro to a new iMac. My Final Cut files are on a 2T WD external HD. When I try to boot I get a "General Error 41" and files do not load. Took the WD to the Apple Store and tried it on one of their iMacs...it works OK. Ideas?

Transitioning from an older G5 Pro to a new iMac. My Final Cut Express files are on a 2T WD external HD. When I try to load a project to the iMac I get a "General Error 41" and the files do not load. Took the WD the Apple Store and tried it on one of their iMacs...it works fine. The problem seems to be in my new iMac, other WD's with different files load OK. Any ideas?

Hi
Can it be so that You try to boot a G5 (Power) Mac from one external hard disk - then try to boot an INTEL Mac from same external Mac.
WILL NOT WORK - It's not just the Mac OS Extended formation that plays a part here - they have to be formatted differently to be bootable on each system.
I don't think there is any solution to this AT ALL.
When You format a hard disk.
• Select Partitions
• Under the graphic representation to the left there is an Alternative button
Here You select if it's supposed to be Bootable on a Power CPU or INTEL-CPU
No other possibilities.
Yours Bengt W

What are steps for transitioning from my current CC team account to new CC individual account?

Similar Messages

Maybe you are looking for