What are the actual dimensions of the new Thunderbolt Display without the stand (e.g., when using a VESA mount)?

I need to use the new Thunderbolt Display without the stand on a VESA mount, but before I order it I need to make sure it will fit height-wise in the allotted space.

The ThunderBolt display specs page has the same sizes listed as the 27" LED Cinema Display specs page (web archive). I just measured my Cinema Display for you and the height of the display itself without the stand is 15 5/8". However, you will need some additional space at the bottom for air flow intake. These displays get hot and need proper ventilation so do not block the vents on the bottom. Also the bottom vents are where the speakers are.
Hope this helps.

Similar Messages

What are the advanteges and disadvanteges of using pl/sql over hibernate

i knwo that pl/sql are well structure and provide a lot of functionalities with oracle databse , but my question is the hibernate might give some advnateges of scalability over pl/sql.
so what are the advanteges and disadvanteges of using pl/sql over hibernate?
and does oracle recommend using hibernate for connecting JSP with oracle 11i , or it is better to connect the JSP pages with oracle databse using pl/sql ?

812643 wrote:
but if i search for the diferencess then there are a lot of opinions about this ..., specially when they say that with hibernate you can integrate with any DB , and it provides object printed architecture, etc.All databases are not equal. This is a basic and fundamental fact. SQL-Server is not Oracle. Oracle is not SQL-Server. As it is the case with Sybase, Ingres, DB2 and other database products. They are all different. And there are some very core differences between them.
So how would a product like Hibernate treat these database products with their differences? By using the lowest common denominator. Which means your expensive database product is dumbed down - and even MS Access will likely have better and more features.
You also need to decide what is the "permanent" part in your architecture. What is going to the core? What is the expensive part? The app server (with Hibernate)? Or the database server?
What are you likely to change next year? The app server server? Or the database server?
In the vast majority of cases, the core is the database server. That is your biggest expense and investment. As it should be - as it holds that which is most precious to business, data. You want to ensure the integrity of that data. The accuracy of that data. Make sure that it can be easily backed up and recovered. Is flexible to use. Etc. Etc.
The database server is the core - and that is where you need to realise your return on investment. By using the database server to its full extent.
Hibernate does not do that. And in that respect, it is junk.
Why does it not do that? Because many Java developers are totally and fully clueless about what database servers are and how to use them. And want to use them as little plug-in black boxes - bit buckets that are only there to provide a data persistence layer. Instead of using the database server to its full extent, they instead use Hibernate, and try to do their own "+database thing+" in the app layer - and do it poorly and with utter lack of any scalability. (and no, only ignorant Java heads think that scalability means throwing more money and h/w at it)
My largest database processes billions of rows per day, every day, 356 days a year (between 350 to 450 million new inserts into a single table per day). And have been for several years now. It does so using PL/SQL. Using Oracle to its full extent. Then there are Java heads that cannot even design and code an app that effectively process 1% of this volume... and grasp at straws like Hibernate and other Java cr@p to "fix" this - when the actual problem is their total lack of ignorance in how to use and scale the database server.
Hibernate is trash - and a symptom of Java developers's ignorance of database technology.

What are the things taken care while using multiple suites?

Hi all,
I have created a plugin which sends the current file path to an url,
its working fine with debugging in Visual studio 2005 and while it is added to the Adobe Illustrator its works only once.
That is its sending the file path only for one file. While i tried for the second time its not working
I am using following suits in my plugin
AIDocumentSuite
AIFilePathSuite
AIActionManagerSuite
AIUnicodeStringSuite
AIURLSuite
I am using the "AIURLSuite" for calling the url and it is calling the url multiple times while its used alone, and its only working once with the multiple suites.
What are the things taken care while using multiple suites? , is it neccessary to release all variables and the suites after completing the task?
Should they released in the same order in which they are acquired?
Thanks in advance
Sreejesh K V

Hi,
The problem was with the "sAIDocument->GetDocumentModified(mod);"
The "GetDocumentModified" is crashing after executing once, i just removed that statement , and now
i am forcefully saving the document with out checking the modification status!
Its working fine now!
Could you please tell me how can we lock a plugin , or a particular function in a plugin.
There is any specific standard to use the GetDocumentModified function?
Thanks and Best Regards
Sreejesh K V

What are the delta mechanisms and tables used for Lo Extraction & COPA

Hi all
what are the delta mechanisms and tables used for Lo Extraction & COPA.
please explain clealry.
Thanks & Regards,
James

James,
Please go through Roberto's weblog :
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
Anyways,
As you know LO cockpit consists of different modules(MM, PP, SD, etc)
They are called appl components. Each of them have a number (eg.MM=02) and for each appl comp they might be different Data sources and for each DS they might be different tables. So, unless you be specific we cant tell a specific table for a DS.
coming to the delta mechanisms, there are " direct delta, queqed delta and serialized delta".
Copa is based on the oepration concern. it can be created on " accouting based" or "costing based".
Assign points if helpful
Kalyan

What are the system ports that XI uses to invoke web services?

Hi guys,
Anyone knows what are the system ports that XI uses to invoke and to be invoked from web services?
I think it uses the port of AFW but I dont have sure
Thanks in advance,
Ricardo.

hi,
if you want to invoke a WS on the XI use
the j2ee port (5XX00)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

What are the pros and cons of using people keywords, given that my catalogue is already uptodate with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular

What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?

What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?

What are the username and password when i click the ICM of JavaEE5@SAP

when i click the ICM of JavaEE5@SAP in the sapmanagement console mmc, It need i input the username and password for Web_admin, What are the username and password when i click the ICM of JavaEE5@SAP and which tools act the role as the VisualAdministrator of NetWeaver04s and NetWeaver2004s?
thank you very much

Hello Guoging,
you can login to ICM with username Administrator and password abc123. That is described in the start.html file, which you can find in the unzipped Downloadpackage of SAP NetWeaver Java EE 5 Edition.
You can use NetWeaverAdministrator(NWA) or config tool to configure this edition. NWA
needs to be installed separately. If you have a default installation, go to
C:SAPJP1JC00j2eeNWAdmin and execute the file install.bat. Ensure that NetWeaver is running, enter user Administrator und the Masterpassword you chose during installation and wait around 20 Minutes or more. NWA is started automatically after installation has finished in your webbrowser.
For more information on NWA read the Administrationguide
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/806e75a0-0e01-0010-2587-fc518de8ac1a">Administration Guide</a>

What are the adv and disadv of using SRM as an addon?

Hi Friends
what are the adv and disadv of using SRM as an addon
Regards
Simha

Hi Simha,
Here are my view points on SRM and ECC one client deployment: The decison to have one client for SRM and ECC is more driven by the business model of the client and functionalities one need out of SRM .Following points needs to considered before deployment:
1) ERP and SRM as an add-on does not support any multiple-backend functions or hub deployment for procurement.
2) Upgrade or migration from SRM system to ERP with SRM as add-on is not supported
3) Strategic sourcing scenarios in SRM are not used by clients with such deployments
4) Although SRM is running on the same client as ECC the purchasing organization have to be maintained in both MM and SRM system
5) From HR Orgstructure stand point there is no additional benifit in same client deployment as compared to seperate deployment
6) From Security stand point its better to have a seperate client for SRM-vendor registration as this functionality is exposed to outside world and internet.
7) Master Data Synchronization is a positive point which is only available within the SRM Add-on deployment with ECC
8) For SRM and ECC (seperate) master data management remains asynchronous and unidirectional
Thanks,

What are the standard Application tool bars used in reports

Hi All,
What are the standard application tool bars used in the report/program?
Thanks in advance
Regards
Chakri

Hi,
Goto SE41,
Programs : SAPLKKBL
Status : STANDARD
Thanks,
Best regards,
Prashant

What are the different tools(software) we used in support projects and avi

hi,
What are the different tools(software) we used in support projects(sap) and aviailable in market??/
Thanks,
bajee

Hey Bajee,
I believe you are talking about Ticketing tool used for AMS ( Application Management Support )....
There are several tools available for this by several vendors....
They are Magic Service desk, HP open view, BMC remedy, Peregrine help desk, SAP Solution Manager can also be used as support desk tool...
I hope that what you asked for and if its not then please clarify your questions !!
Inspire ppl by rewarding !!
Regards,
Anand

What are the possibilities and limitation of using Out of the box content search webpart on SharePoint Online 2013/O365 ?

Hi All,
We are migrating from on-premise SharPoint 2010 to SharePoint online 2013.
I have few questions below:
What are the possibilities and limitations of using Out of the box content search webpart?
Also, how the cross site publishing will work in SharePoint online something with managed navigations and product catalog apporach? if it is not supported, then what are the alternatives to acheive the same?
Appriciate any commnets/clarifications.Thanks in advance.
Thanks,
Dhananjay.

Here are the possibilities of Content search webparts
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/configure-a-content-search-web-part-in-sharepoint-HA104119042.aspx
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/when-to-use-the-content-query-web-part-or-the-content-search-web-part-in-sharepoint-HA104206662.aspx
Compare the strengths and limitations of the Web Parts
It’s important that you understand the strengths and limitations of the two Web Parts because if you choose the wrong one, your site could run into performance problems. You can use both Web Parts to show content that is based on a query. In a simplified
world, here’s how you can decide between the two:
Use the CQWP when you have a limited amount of content, your query is simple, and you don’t expect your content to grow much in the future.
Use the CSWP in all other scenarios when you want to show content that is based on a query.
The table below gives a comparison of the two Web Parts:
Web Part behavior
Content Query Web Part
Content Search Web Part
Query configuration
Easy
You’ll need to know about certain search features such as
managed properties.
Query across large amounts of content
Limited
Yes
Handle complex queries
Limited
Yes
Scale to handle future content growth
Limited
Yes
Display content from other site collections
No
Yes (see
section below)
Design of query results can be customized
Yes, by using XSLT.
Yes, by using HTML.
Maintenance cost in a complex site architecture
High
Small (see
section below)
Narrow down the query results that are displayed in the Web Part
No
Yes, in combination with the
Refinement Web Part.
It was not there previously but then it was added to Office 365
http://blogs.office.com/2013/10/29/search-innovations-for-site-and-portal-design-in-sharepoint-online/
If this helped you resolve your issue, please mark it Answered

What are the levels and points when you go to yor profile here on the website

what are the levels and points when you go to your profile here on the website? and what do they do?

Welcome!
The level system is rather thinnly explained in this ASC tutorial:
Reputation points, status levels and privileges
What you get for it--that I know of--is that, at Level 2, you get the privilege of using the "Report Abuse" function to tell the Hosts about an abusive poster, inappropriate post, or even to ask that a post be moved to another, more appropriate forum area for the subject matter.
At Level 6, you get Lounge privileges where you have direct access to the ASC Hosts for helping with forum function issues, and to an area where you can hobnob with other Wizards.
The list of all ASC tutorials is here:
https://discussions.apple.com/static/apple/tutorial/index.html

What are the TCodes generally we can use in ABAP?

Hi Abapers?
What are the TCodes generally we can use in ABAP?
Early reply is highely appriciable.
Regards,
Chow.

HI Chow,
go thru this t-codes..
S001 Abap Workbench
SE09 Workbenche organizer (Transports)
SE11 ABAP/4 Dictionary
SE16 Data browser
SE24 Class builder
SE30 ABAP Runtime analyzes
SE36 Logical Databases
SE37 Function builder
SE38 ABAP/4 Editor
SE55 Table maintenance dialog
SE80 ABAP/4 Object browser
SE91 Message Classes
SE93 Maintain transaction
SapScript
SE71 Form painter
SE72 Style maintenance
SE78 SapScript Graphics Management
SO10 Create standard text module
Workflow
SWDM Workflow explorer
SWDD Workflow builder
SWUS Start workflow - Test enviromnent
SWU0 Simulate event
SBWP Business workplace
PFTC_INS Create Task/Task group
PFTC_CHG Change Task/Task group
SWUD Dagnosis
SWI1 Work item selection
Batch input
SHDB Batch input recorder
SM35 Monitor batch input
System
SM04 User overview ( Possible to end sessions)
SM12 Lock Entries
SM21 System log
SM30 Maintain table views
SM37 See job status
SM50 See processes
ST22 Short dump analysis
Other
ABAPDOCU ABAP coding examples supplied by SAP
AL11 Look at t directories on the host system ( With drill down )
CMOD Enhancementprojects
LSMW LSM Workbench
OSS1 OSS
SA38 Submit batch job
SE01/STMS Transport system
SLG1 View application log
SLG2 Delete application log
SPAD Output devices
SP01 See spool
SPRO Customizing
SPAM Support packet manage
SU03 Maintain Authorizations: Object Classes
SU51 Display Authorization Data (Can be called after failed authorization)
SWEC Events for change documents
SW01 Business Object Builder
SWO4 Display Businesss Object Types
VOK2 Maintain OutputDetermination
regards
sham.

What does the RHD symbol mean when using the multiple speakers?

i have two 1st gen apple TVs and when i pull up the multiple speakers prompt, i see an acronym "RHD" after each device.
what does the RHD symbol mean when using the multiple speakers?
typically i was used to seeing the Apple TV-1 vs. Apple TV-1-RHD??
What is the difference?

It's been modified to run Remote HD.
http://remotehd.com/

What are the pros and cons re using an intel iMac vs MacPro with LP8?

I'm considering getting a new intel Mac in the near future (presuming a new MacPro will be released in the near future - maybe at the same time as Leopard). I compose largely for film and television and I am composing largely using a combination of loops, software instruments and some recorded live performance. I usually sync to a low res quicktime movie.
I do like the idea of a simple and uncluttered work environment with an iMac, added to which there's also a degree of portability with the iMac however the MacPro is obviously more powerful. I'm not sure how much the difference in power between the two computers would affect me.
Would I be compromising myself much if I went for the iMac over the MacPro? What are the pros and cons of the iMac vs the MacPro in relation to Logic Pro 8?

In the world large-scale music composition using samples, loops, etc (especially for film) your two biggest needs are RAM and HD speed/access. The imac looses big time in this department (as a single computer at least) as it can only be upgraded to 4gb ram, and only holds one internal HD, and also lacks any PCI expansion for DSP cards, audio interfaces, etc.
In generalyou want to separate your data vs applications as much as possible, to ensure both can be accessed quickly and easily by the computer. So its best to have your system software / applications on one internal HD, and your logic data (samples, audio recordings, loops) on another drive(s). You can do this with an iMac via USB, FW800, & FW400, but depending on how big your projects get, how many USB and FW drives / interfaces you use, and how much data you need to stream, you could overload the buss on the imac (not sure if it has multiple busses or not). Plus speed wise, internal SATA are much faster than external drives, and the mac pro with its 4 internal slots seems like a great choice for speed and flexibility.
However, if you dont find yourself doing large scale projects, then you might be better off going with an imac. We just purchased one for my father and it runs great! It blows the socks off of my Dual 2.5 G5 tower in terms of CPU speed! If you run into problems running things from the imac, you could always add a mac-mini down the road to stream sample libs, as a Logic node, etc, which seems to be a much more cost effective solution.
I hope this was helpful, but I probably just made the decision harder . In fact, if I were to start over today, I dont know if I'd go with a MacPro, or an iMac / mac mini combination. they both seem to have their advantages / disadvantages.
Best of luck!

What are the actual dimensions of the new Thunderbolt Display without the stand (e.g., when using a VESA mount)?

Similar Messages

Maybe you are looking for