What are the advantages of MacBook Pro for digital DJing?
What is better with a MacBook Pro? Especially for using Traktor Pro and a USB-Control-Device (Behringer BCD 3000)?
(just thinking about buying a MacBook Pro...)
If you are thinking about digital djing on the mac, this might help:http://guides.macrumors.com/DJing_on_the_Mac
Similar Messages
-
What are the advantages of using ENC for a datasource
Other than eliminating a tight binding between a EJB and a datasource , what are
the other considerations and/or advantages of using JNDI ENC to define a datasource
reference vs a direct lookup of a Datasource in the EJB implmentation?
For example, are their performance advantages by the datasource being cached in
JNDI ENC?Hello Bryan,
Basically the main advantage is to not have the tight coupling between the EJB
and the particular JNDI name that it's bounded to. Please refer to a previous
post where I addressed this issue (perhaps a few days ago on this newsgroup).
In addition, you will always gain performance improvements by caching the remote/local
home objects for your EJBs.
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
"Bryan Boyer" <[email protected]> wrote:
>
Other than eliminating a tight binding between a EJB and a datasource
, what are
the other considerations and/or advantages of using JNDI ENC to define
a datasource
reference vs a direct lookup of a Datasource in the EJB implmentation?
For example, are their performance advantages by the datasource being
cached in
JNDI ENC? -
What are the symptons of macbook pro hard drive not running fast enough
what are the symptons of the hard drive not running fast enough
Physically the drive will be as fast as any other of its class, and if not then it's experiencing a mechanical issue that should prompt a warning or two in the system, especially if you use a drive management tool like Disk Utility that checks the drive's built-in "S.M.A.R.T." diagnostics.
As for "logical speed," if there are bad blocks on the drive where sectors cannot be read or written to because of a breakdown of the storage medium, then this can result in a program or the entire system crashing or hanging (generally the latter is the case), where it usually pauses for a number of seconds at a time. This is usually accompanied by messages that state "I/O Error" or other similar warning in the OS X Console (in the Applications > Utilities folder).
Beyond this, drive formatting errors such as might happen after a crash or power outage can result in similar hang-like behavior, though this is usually not as distinct of a hanging behavior as is seen with bad blocks.
Finally, if the drive is simply full of files or highly fragmented (not as much of a problem in OS X, but it can happen), then this can reduce access time for reading and writing files, and prevent the system from optimizing the use of RAM, which can result in overall slowdowns. Heavy drive use can also cause similar bottlenecks, but this is ususally only an intermittent issue during a time when you are performing a heavy file transfer or copying process, or other task that occupies access to the drive's index and formatting (e.g., if you check it for errors with Disk Utility, then you may see the system pause or slow down during the check). -
What are the advantages of using cirrus for multiuser applications ?
Hi!
Can anybody help me understanding the advantages of using cirrus for multiuser apps ?
One advantage i think, may be it's free . Isn't it ? Anything else ( say, it's faster .? )The main advantage is that it is a P2P system. It is not the same as a Flash Media Server or other Flash servers. When using Cirrus, your content is sent directly to and from clients, they do not need to send it to the server, get it interpreted and then send it to the other user.
So essentially Cirrus is fantastic if you have an application envrionment that needs multiuser interaction, but only for client to client operations: you'd want peer-to-peer. -
What are the differences between MacBook Pro 2008 and MacBook Pro 2012?
AirPlay Mirror in OS X Mountain Lion, allows the user to connect a MacBook Pro to a TV using Apple TV, but only if the MacBook Pro is early 2011 or newer. My MacBook Pro is 2008, 2.5 GHz Core 2 Duo with 4GB 667 MHz DDR2 SDRAM. What am I missing that would allow me to use AirPlay Mirror, and is it possible for me to upgrade my MBP to early 2011 specs?
About four years of hardware change. You csnnot upgrade your hardware. You can simply buy a new computer or find an alternative:
About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Another solution is the Air Parrot. -
What are the best, affordable Macbook Pro speakers?
I'm thinking $50/60 and lower range
preferably 3.5mm input instead of USB 3 connection or bluetooth connection, but USB 3 is fine too.
speakers that give good sound like logitech, jbl, etc. <-- not neccessarily the kinds I'm looking for, any good ones will do- from any brand or storesBest sounding speakers is a very subjective term, what sounds good to one may sound horrible to someone else.
I would take my MBP to the store and "audition" some and see what sounds best to YOU. (There are many out there so listen to a few, make some notes for comparison (bass, treble, loudness, clarity, ease of use, size, etc...)
I would think any salesperson that wishes to make a sale would be happy to allow you to do this.
Hey, it's your ears/brain processing the sound, buy what sounds good that fits your price range.
Forget what the spec sheets say, as they are written by marketing departments, use your ears -
What are the advantages of Creative Cloud for a Virtual Team?
Hi, I run The Virtual Works UK, we are a team of multi-skilled professionals who are remotely based in various locations across the UK. We collaborate heavily with our customers and provide services such as implementation of Customer Management Systems, Workforce Management Solutions and Virtual Project Assistance.
I have been looking at a few applications both cloud based and others.
I wondered whether those of who have used Creative Cloud could list its 10 main advantageous to those of its competitors ie functionality and how they could benefit a business such as mine.
We sell B2B on our behalf and that of our customers, who are mainly new, small to medium sized businesses in different verticals.
How would our use of Creative Cloud benefit them as well?
Any feedback would be most appreciated.HI VirtualWorkscom
Although not specifcally what you are asking for, these might be a good starting pointing
http://terrywhite.com/5-myths-about-adobe-creative-cloud/
http://www.adobe.com/products/creativecloud/tools-and-services.html
http://www.adobe.com/products/creativecloud/faq.html
-Dave -
What are the advantages and disadvantages for the larger blocksize and for
What are the advantages and disadvantages for the larger blocksize and for the smaller blocksize?
Smaller blocksize
Advantages
GoodHas relatively large space overhead due to metadata
(that is, block header).
Not recommended for large rows. There might only
be a few rows stored for each block, or worse, row
chaining if a single row does not fit into a block, for small rows with lots of random
access.
Reduces block contention.
Disadvantages
Has relatively large space overhead due to metadata
(that is, block header).
Not recommended for large rows. There might only
be a few rows stored for each block, or worse, row
chaining if a single row does not fit into a block.
Larger blocksize
Advantages
Has lower overhead, so there is more
room to store data.
Permits reading a number of rows into
the buffer cache with a single I/O
(depending on row size and block size).
Good for sequential access or very large
rows (such as LOB data).
Disadvantages
Wastes space in the buffer cache, if you are doing
random access to small rows and have a large block
size. For example, with an 8 KB block size and 50
byte row size, you waste 7,950 bytes in the buffer
cache when doing random access.
Not good for index blocks used in an OLTP
environment, because they increase block contention
on the index leaf blocks. -
What are the advantages to using BlazeDS or Granite?
We have decided to use Flex3 to upgrade our UI. We have heard
good things about using Granite Data Services, but it requires jdk5
or higher, and the same for BlazeDS.
We are currently using Websphere 6.0 and are discussing our
environment options: replace Websphere with JBoss 4.2 (Sun jdk6),
upgrade to Websphere 6.1 (IBM jdk5), or keep the current Websphere
6.0 (IBM jdk4). The concerns are upgrade cost, and time to develop
and qa any changes to the environment.
We would like to get some feedback on pros and cons of using
Flex with these three environments. If we stay with jdk4, will we
spend nn% more time writing code that could have been done out of
the box with Granite? Are there improvements with memory, speed,
etc. using Flex with a later version of the jdk? Will development
time be shorter with a later version of the jdk? What are the
advantages and disadvantages of using Flex with WebSphere versus
JBoss?
Thanks for your input!BBM and PIN messages are messages sent from one BlackBerry to another. The message is composed by the sender and goes through RIM's secure server before being delivered to the recipient. They are only available to BlackBerry users.
The thing I like about them is how you can see if they've been received by the recipient. Once the message reaches the recipient's phone, you'll notice a small 'D' at the start of your message. This means it's been delivered. When the recipient opens the message, that 'D' will switch to an 'R', for 'read'. So now you know that it's actually been received by the recipient.
One more great thing about these messages is that there is no limit to length. As you're probably aware, most carriers limit text messages to 160 characters; not so with these messages, they can be much longer.
BBM and PIN messages are the same type of message, but with PIN messages you're limited to just that one contact receiving it. With BBM, you can have many contacts in on a chat or you can broadcast a message to many contacts at once.
I hope that explains things for you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
What is the value of MacBook Pro 17 inch 160 GB?
What is the value of MacBook Pro 17 inch 160 GB?
You can try one of Apple's recycling partners to see how much they'll offer for it:
http://store.apple.com/us/browse/reuse_and_recycle
But you are likely to get more for it on ebay or craigslist. -
Whats's the difference between MacBook Pro 13 and 13.3 ?
This, Whats's the difference between MacBook Pro 13 and 13.3 ?
Firstly, you are not in MacBook Pro forum, so you need to get your bearings.
2nd check the specs page
http://www.apple.com/support/macbookpro
Then Bing/Google for reviews, Ars is always good but dozens have done one.
2011 brings Intel Sandy Bridge processor boards, Thunderbolt, SATA3 (6G) along with options for SSD and much more RAM (can save buying RAM and doing the upgrade yourself) -
Converting RAW to DNG! What are the advantages / disadvantages?
I have Canon cameras and shoot RAW, but the question itself is surely also valid for Nikon, Sony or other brand-shooters.
When importing my pictures to Lightroom, I could convert them to DNG but didn't do this up to now, because I do not know what I loose. I suppose that I loose the ability to process my files with DPP, but I will not do that anyhow. I can appreciate the advantage of having the file in an open documented format, where even I could easily write a reader for it. So the answer should not be what I can easily find in the Adobe introduction into DNG. I have also the DNG specification in front of me, and I can read it, because I once wrote a program to read TIFF files. I understand that I could add the original RAW image stream, but I do not want using up the space wasted for this. I know, that all development parameters used for the specific RAW image can be written with the image file instead of having those stored in a database or a side-car-file.
But what I did not find until now a technical explanation about what happens during the convert. Who can enlighten me? Where do I find the missing technical explanations?
Thanks in advance!
Lucien.Feierwoon wrote:
That wasn't the question... .
Based on the title of the thread and your initial post, it seems like your question had a lot of
"What are the advantages / disadvantages?"
in it, and only a little
"What happens at a technical level when converting"
But if you want more detailed info about conversion, and you have the aptitude to understand, I recommend doing what Lr5user-pt recommended:
Download the DNG SDK and dig in - all your questions will be answered (and if not, you can also ask DNG-specific technical questions in the DNG forum).
As far as my "sources" regarding the technical summary I presented, they are many and varied, none of which are the DNG SDK. In other words, my knowledge is based more on experience over the years - I don't know all the details under the hood..
Some experiments to consider doing:
* exiftool (-X) a proprietary raw file, then convert to DNG and repeat.
* open a proprietary raw in a DNG-supporting software of your choice and inspect metadata, then open the converted DNG in the same software and re-evaluate. Compare to proprietary raw opened in manufacturer's software, and what you see via exiftool.
Tom Hogarty (Lightroom project manager) and others who know have said: "DNG converter discards no metadata", and I believe them, but haven't verified for myself. Yet once proprietary metadata is in the DNG, most (all?) software will no longer decode it. A prime example is focus points - presumably they're there, but once converted, focus point feature is no longer supported. The amount of work required to support converted focus point data is unknown (to me), but as far as I know, no software has ventured to do it. If you want focus points, don't convert.
If you want the truth, I think for most people it's "not wise" to convert to DNG. Why? because unless you already know why you are converting (and need to convert to satisfy your goals), or you already know why you must NOT convert (e.g. so you can open the files in mfr.software, and see focus points..) the pros and cons are likely to be a wash, and now you have twice the number of raw files, unless you discard your originals, which would be REALLY "not wise", in my opinion. If you find the notion of "openly documented format" sufficiently compelling, then, ya know, more power to ya (I don't judge..), but there is no guarantee that DNG will outlast NEF (or..), and if it does, there will be ample opportunity to convert before you're left in the cold, unless you're stuck in a cave for a few decades, or are kryogenically frozen.. True, if all companies die, you may be able to write your own DNG converter (/reader), given the DNG documentation, but FWIW, NEF is also thoroughly documented (document is in freely downloadable SDK), and reverse engineerable (that's what Adobe and Phil Harvey does), so you could also write your own NEF converter, so not really a very compelling argument, not this year anyway - ask me again in a few decades..
If filesize is a main draw, then be sure NOT to save the hi-rez previews in your DNGs, otherwise you've just lost most or all of the filesize advantage. Also, you can strip previews from some proprietary raws (e.g. NEFs), to reduce filesize.
Personally, if DNG supported sidecars, I would be more likely to convert, because file-management/backup is only an issue if you "forget" about xmp sidecars (and I do not forget), and I'd rather have my xmp in separate ready-to-read xml text files, rather than embedded in binary files, but hey, that's me..
PS - I always use/encourage-others-to-use DNG when distributing raws to others for use in Adobe software, so xmp is not separate and can not get lost.
PPS - proprietary raws and dngs are both just glorified tiff files - raw data, previews, and metadata..
Don't get me wrong: I am NOT anti-DNG, and in fact - just the opposite: I am PRO dng, it's just that I wouldn't (don't) convert my own raws to DNG at this point. If you find the reasons to convert now are sufficiently compelling, you have my complete support and cooperation, fwiw..
Cheers,
Rob -
Does anybody knows what is the difference between MacBook Pro MC723LL/A and MC723RS/A?
Does anybody knows what is the difference between MacBook Pro MC723LL/A and MC723RS/A?
evghenii wrote:
Does anybody knows what is the difference between MacBook Pro MC723LL/A and MC723RS/A?
No difference other than one is for the Russian market. Specs on both are the same, standard Apple Store issue versions.
Of course the screen choice of anti-glare, glossy, high res or low res is not included.
The default is likely the cheap glossy and low res.
MC723LL/A - 2.2Ghz MacBook Pro (15" Early 2011) $2,199
Display 13,3'' Dual-Core i5 2.3GHz/4GB/320GB/HD Graphics/SD, Russian (MC700RS/A)
Display 13,3'' Dual-Core i7 2.7GHz/4GB/500GB/HD Graphics/SD, Russian (MC724RS/A)
Display 15.4" Quad-Core i7 2.0GHz/4GB/500GB/HD Graphics/Radeon HD 6490M/SD, Russian (MC721RS/A)
Display 15.4" Quad-Core i7 2.2GHz/4GB/750GB/HD Graphics/Radeon HD 6490M/SD, Russian (MC723RS/A)
Display 17'' Quad-Core i7 2.2GHz/4GB/750GB/HD Graphics/Radeon HD 6750M/SD, Russian (MC725RS/A) -
Has anybody heard if Apple is going to fix the Logic Board on the early 2011 Macbook Pros for Free? Of course my Apple Care warranty expired months ago, and this just happened. I've been looking online for solutions. But am wondering if anybody has heard if Apple is going to take care of this, or what others are doing to get Apple to repair this problem without having to pay $1,000!!!!!!!!!!!!!!!
I know this is an old post but just in case it helps. They ARE fixing certain macs for free!
https://www.apple.com/au/support/macbookpro-videoissues/ -
What is the problem on MacBook Pro retina 15"?
I just bought a new MacBook Pro retina 15". After unboxing, I turned it on and there was no any problem. But the second time I turned it on and charge battery, I got 2 problems, 1. The machine made noise loudly and 2. The charging is not working. What is the problem on MacBook Pro retina 15"? However, after about 1 hour, it works normally. Should I still use it or sell it before it has more issues?
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.
Maybe you are looking for
-
How do I increase the number of pages viewed in history?
how do i increase the number of websites in history?
-
C3-01 memory card problem..
Hi guys, I have a problem and that is that when i take a picture or download an app and want to install it my phone gives the message that i don't have enough space and that i have to delete some stuff but i got a memory card of 8Gb inside!!!???? How
-
Hi, I've set up an application that works fine and I just localized it: english and chinese. I've set up the compiling preferences, created the properties files and loaded them into my components with fx:Metatag. Then I assigned the following to all
-
How to create Dev, Test and UAT environment of OAS 10g on single Linux box
Hi According to Paul's forms/reports installation thread, i installed standalone versions of Forms & Reports (10.1.2.0.2)services on Linux suse 9. And it is working fine. Now my next requirement is that i want to create three environment on my Linux
-
Does Apple repair computers under warranty if you dropped it?
My Macbook Pro slipped out of my hands tonight and crashed to the floor (hardwood, alas). And the side, where the ports are, struck a power strip under my desk. So much for Unibody durability----when I picked it up i was sickened to see a HUGE DENT o