What are the best Color "Display Settings" for both my Macbook Pro Retina and Thunderbolt Display??

I have recently purchased a Thunderbolt Display for my MBPr (early 2013) and was wondering what were the best settings for both to obtain an equal color and graphic appearance. I want to have them identical for working on graphics and illustrations.
Thanks

I have the same laptop. There's nothing you really need to do to optimise the system. Perhaps just install the cuda drivers.
It runs premiere like a dream.

Similar Messages

  • What are the best imovie, mpeg4 settings for making dvds?

    What are the best imovie, mpeg4 settings for making dvds?

    • iMovie'08 to 11
    - Share to Media Browser - AND as Large (or Medium) - HD or other resolutions degrades the final result
    iMovie'08 to 11 are not the tools of choise if quality is important as they all degrade the picture by discarding every second line when going from, Event's to Project's and this can not be mended.
    iMovie HD6 and FinalCut delivers 100% of what any DVD-Authoring program needs.
    • DVD is as standard MAX - intrelaced SD-Video - and can not be any better than this
    • iDVD does only care about TIME / Duration as
    iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
    About double on DL DVDs.
    • iDVD Does Region = Zero (to be played everywhere)
    • Frame rate - DVD can be in two types PAL (25fps) and NTSC (29.97fps)
    If Your material is 30fps then keep to NTSC (29.97fps), if 25fps keep to PAL.
    One can feed iDVD the other frame rate - BUT RESULTING DVD WILL BE BAD
    I use JES_Deinterlacer (free on Internet) to convert all material to the same and final frame rate
    • NTSC - US etc
    • PAL - EU etc
    Yours Bengt W

  • What is the best external battery to use with a macbook pro retina?

    Looking for the best option here. What is the best external battery to use with a macbook pro retina?

    You should check your date of purchase against the manufacturer's warranty
    or guaranty since some of those better brands have some recourse should
    they fail within a specified time period. A good reason to save dated receipts.
    Since solid-state USB drives probably don't (all) use a wear-leveling software
    to equally utilize their recordable space evenly, it is possible that some of these
    may exhibit a failure in some sector areas due to excessive over-writing. If the
    ones you use do not have such a technology or an undercounted total capacity
    with a means to automatically write in other sections, you may have to consider
    manually using a disk utility to zero-overwrite and reformat them occasionally.
    Even so, that may only help a marginal flash or thumb drive work a little longer.
    Should a camera memory card fail you still may be able to attempt with margin of
    success, to +recover image files+ from it. re: http://www.cgsecurity.org/wiki/PhotoRec
    The standard default format they ship with works well for most file types; so if
    you aren't moving OS X or Mac app specific files around on a USB flash drive,
    the original format should be fine. Oh, you can use Disk Utility to attempt to do
    a repair; but in some cases you may have to reformat them, etc.
    {Some of the flash drive warranties or guarantees may vary from between regions;
    so if you have one with a '5 Year' guarantee in the US, other rules may apply in EU,
    or when you seek to replace an item under warranty outside of where it was bought.}
    Good luck & happy computing!

  • What is the best case to get for my new Macbook Pro

    I just bought a new 15" Pro over the phone last week and according to the tracking it should be here by Wednesday.  I am extremely excited and cannot wait to get my new machine (my first mac).  But my question is, I want to protect it, what is the the best option, best case, or best sleeve, in order to protect my new investment?
    Thank you in advance for any comments.

    I saw this today when researching the same thing
    Mouse over the pictures for a side view.
    http://www.radtech.us/Products/MacTruck.aspx
    (no comp)

  • MacBook Pro Retina and Thunderbolt display

    Hi all,
    I noticed a for me new strange behavior when running  my new TBD on my new MBPR. Running Mountain Lion.
    When the lid is closed, that is when the MBPR's screen is closed and I use the TBD as an external display it only works when I use the TBD's power supply or the Mag Safe dito, do i disconnect the power from the MBPR the screen geas black... ok , that is as described in the manual. But....
    ..in the same scernario with no external power to the MBPR... if I open the MBPR, that is pull up the MBPR's screen they both spring to life anf can be used again???
    What's the logic about this?
    Please tell me the relevance why this is possible?
    Regards
    /Cekari

    Welcome to Apple Support Communities
    Open System Information (in /Applications/Utilities) without the Thunderbolt Display plugged in, and choose Thunderbolt in the sidebar. What does System Information say? Then, try with the Thunderbolt Display plugged in, and tell me the results.
    Also, reset the SMC > http://support.apple.com/kb/HT3964 And do a PRAM reset > http://support.apple.com/kb/HT1379

  • What is the best iTunes Equalizer settings for Bose QC15 Headphones?

    What is the best iTunes Equalizer settings for the Bose QC15 Headphones? An image of those settings would be great.

    I'm a bit of an audio geek, so I can tell you that YES whatever sounds right is what you want, but NO those settings are not very good. The general setting is "OK" but the values are extremely out of range. Take that setting and reduce the distance between the sliders and you're getting there. Look for example at how the other iTunes presets are made, the don't go that far from the horizontal middle, and for good reason.
    When you play a recorded song, the song has usually been put through an extensive process of mixing, EQ and mastering before you got it, in order to get the best balance of all frequencies, to ensure the best sound accross a wide range of speakers and headphones, and to ensure the most important details and instruments are audible when played together.
    All speakers are different, and that's where the idea of an EQ for the listener is introduced. The idea is to tweak the overall sound from your music player (iTunes) to compensate for the strengths and weaknesses of your speakers. Which to be honest, is a bit much to expect form a typical music consumer.
    The iTunes EQ has a set of horizontal lines representing 3dB (volume steps) each. In my experience you should not boost or cut more than 6 db at the most - and that's a lot! I stay at around 0-4dB. The extreme options are there to cut noise from bad recordings or emphasize a detail you can't hear very well.
    So here's basic EQ lesson:
    The EQ represents the range frequencies in sound that the human ear can hear. Actually they go beyond that - most people cannot hear the far left and right frequencies. The range of frequencis start at "deep" or "low" frequencies at the left (bass) passing through the Midrange (midtones) in the center, to the (treble) at the right.
    Your speaker has a limit to how many frequencies it can play at once before it starts to lose detail - meaning one sound will drown out in order to make room for another. So don't over-EQ your sound or it'll ruin it.
    How to tweak an EQ:
    1) Start by playing a well-produced piece of modern music  - it'll most likely be well mixed and employ a wide range of frequencies. I'm into heavy metal but for this I'd probably go with some average pop music, because metal is so noisy it gets hard to pick out the details.
    2) Set you EQ to FLAT - zero all accross the board. It'll sound pretty flat and boring unless your speakers are very "flavoured" or "colored" already.
    Sliding any of the EQ bar up, will increase or boost the volume of the frequency the bar represents. You can't really add frequencies that aren't there already - you're just adding noise in that freqeuncy and that will "fill up" the available frequencies on your speaker, causing that "drowned out" effect I was talking about.
    Instead, slide them down from the center, and you're cutting the volume instead. This is better because it'll leave more "room" for the other frequencies. You can always use the Preamp slider at the end if you're worried about loudness (but I wouldn't).
    3) Start by tweaking the 500 and 1K slider. This represents the middle of your ears' range of hearing and the most noticable change. It should most likely go downwards - this will take the "canned" sound out of your music and that'll be apparent quickly. Go ahead and slide that down as far as -6dB.
    4) Now work outwards from the center forming a "v" shape, where the top tips of the V end at the 64 slider and the 8k slider. The very far left and right sliders (32 and 16K) should dip down again to about 0bB. Trust me, these are almost non-important in most music. You can tweak thos last if you feel it's needed.
    5) now it's time to start playing round with the V shape. Go ahead and try sliding the sliders a little up or down between 125-250 and 1K to 4K. You may find that some need to move a lot out of the average "V" shape before the sound is good. This is what my iTunes EQ settings ended up looking like for my Motörheadphones "Motorizer" headphones:
    Hope it helps.

  • What are the best books to purchase for pl/sql programming?

    What are the best books to purchase for pl/sql programming?
    I am new to this field and I am looking for the best books to help me in pl/sql programming. Can someone please suggest?
    Thanks

    In my opinion one of the best to start
    Oracle PL/SQL Programming, Third Edition
    Steven Feuerstein

  • What are the best dimensions to allow for iPad 3 Retina for full-page landscape images?

    What are the best dimensions to allow for iPad 3 Retina for full-page landscape images?
    I read an article and cannot find it that said something about trying to make it 2million pixels and JPG to keep it small, but what exactly should the dimensions be that I ultimately import?  Is there some kind of a "density" setting I have to use, as well, when exporting from Photoshop, for example?

    See Optimizing performance in your iBooks Author books
    Density is discussed by Apple in this context as 'dpi'...
    132 - iPad 2
    264 - new iPad
    At the top of this forum there are popular links listed on the right, including image sizing etc. Be sure to study those existing/previous threads on this topic.
    Good luck.
    Ken

  • What are the best storage systems to archive inactive (but still used) apps and files?

    What are the best storage systems to archive inactive (but still used) apps and files of all types? I already have a Time Casule which I back up on and I'm needing to create more space in my flash drive in my Mac Pro, so I need another external storage system I can use to archive all that I don't currently need. I may still wish to edit and use the files, and I am not very techy and am a broke student... so anything grossly expensive is a no-no for me (between $50 and $200 is idyllic). If you could simply post links of different good/useful hard-drives that I can use, I'd be thankful.
    Thank you
    p.s. I'm australian, so anything within this country would be great. Or I can deal with somewhere that has cheap shipping.   

    It's been moved and seconded. Any discussion? Yes:
    Buy two external drives. Use one for Time Machine. Be sure this drive is at least twice the capacity of your computer's hard drive. Use the second drive as a bootable clone of your computer's hard drive. Should something happen you can immediately get the computer up and running from the clone until your restore from the Time Machine backup. This is what is called redundancy. Should either backup drive fail, there's another to take its place. Backup redundancy is very important. You can never have too many backups.

  • What is the best external hard drive to backup my MacBook Pro?

    What is the best external hard drive to backup my MacBook Pro?

    The best is a Hitachi.   This is basically the ONLY thing the "HD gurus" agree on.
    Toshiba is nearly neck and neck in 2.5" USB external HD to Hitachi.
    Here are "best for the money"....at bottom is BEST external USB HD
    best options for the price, and high quality HD:
    Quality 1TB drives are $50 per TB on 3.5" or  $65 per TB on 2.5"
    Perfect 1TB for $68
    http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
    Nice 500gig for $50. ultraslim and perfect
    http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
    2 Terabytes, 2.5" and only $129
    http://www.amazon.com/Toshiba-Canvio-Basics-Portable-HDTB120XK3CA/dp/B00ARJD56K
    updated "design" casing cousin $119
    http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
    *This one is the BEST  external HD available that money can buy:
    $75
    HGST Touro Mobile 1TB USB 3.0 External Hard Drive
    http://www.amazon.com/HGST-Touro-Mobile-External-HTOLMX3NA10001ABB/dp/B0062FZ2WS /ref=sr_1_1?s=electronics&ie=UTF8&qid=1379185002&sr=1-1&keywords=hitachi+extern a l+hard+drive
    Most storage experts agree on the Hitachi 2.5"

  • What is the best way to run Sage on a MacBook Pro?

    What is the best way to run Sage on a MacBook Pro?  I am a first time Apple user.

    There's a lot of Sage out thete so fill us in with information. If it runs on Windows then you'll need to create a partition on your mbp using boot camp and install Windows. So what is Sage for you?

  • What is the reasonable battery count cycle for a new macbook pro?

    what is the reasonable battery count cycle for a new macbook pro? I just bought it and i found that the count cycle for the battery is 6, is that normal?

    First off, a MacBook Pro is not a Power Mac.  Power Mac is the nomenclature for Apple desktop machines prior to mid-2006.   Mac Pros also are desktops, but later than mid-2006.    http://www.apple.com/batteries/ covers Apple notebook batteries and other battery performance.  I've asked this thread be moved.

  • What is the best cable to use to connect my MacBook Pro to my LG HD TV

    What is the best cable to use to connect my MacBook Pro to my LG HD TV?

    Read the tv user manual to see what they recommend. 

  • What are the best printer deployment practices for Win Server 2012 R2?

    I have about 40 printers deployed around my school. My users move around my building and log into several computers throughout the day. I need to consistently get the correct group of printers to map to the computer upon startup and set a default printer.
    I have tried to use GP, but the inability to set a default printer within the computer policy is a crippling issue. I have tried using third party software (Kaseya DPM) where I can set printers and default printers, but the real-world, daily deployment is
    inconsistent. I have a logon script that I used to use, but the printers were trying to map before the network was established; the printer mapping was failing because the script was too fast.
    This is not a new idea. What is the best way to consistently deploy printers that are mapped to specific computers?

    Am 04.08.2014 um 22:10 schrieb VermontTech:
    > but the inability to set a default printer within the computer policy is
    > a crippling issue
    Why not using user policy with item level targeting for the computer name?
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • What are the optimum wifi router settings for ipad mini

    My new iPad Mini WiFi access is really slow on my home WiFi network.  All my other WiFi devices are working fine.  I have a D-Link DIR655 Wireless Router - What are the optimum router setting to ensure compatibility with the iPad?

    I'm having the same issue with a TP-LINK router.

Maybe you are looking for

  • XML data into sap

    Hi guys, How to upload a XML file into sap? is there any function module? can anybody give me an example program for converting or uploading XML data into sap. regards, vinoth.

  • Issue with "Find" in Bridge when searching external drive.

    When using "Find" in Bridge (version 2.1.1.9) in CS3 to search for files on an external hard drive I must either check "Include Non-Indexed Files" or go to the external drive and build the cache for the folders I want to search. Otherwise the files w

  • Stationglobals in a Labview custom step type inside a new thread do not get updated

    Hi, I have a Custom Step type which I use to pass parameters to TestStand from a VI and vice-versa through some step fields. I run the VI inside a sequence in a new thread and expect the VI to update the parameters when I change them through the Test

  • What's the deal with buying an unlocked iPhone?

    I think I'm going to buy an unlocked iPhone. That just means I don't have to deal with any contracts, right? So then do I just walk into a Verizon/AT&T/Sprint store and buy a SIM card? And, essentially, if I owned SIM cards from different carriers, I

  • ORACLE Crystal Report Error

    Hi All i am using Weakly Bound REF CURSOR to load data to crystal report (getting data from SP) when i am adding SP to the report it will prompt a massage as follows ORA-00000: normal, successful completion Help me to over come this