What are the best practices to extend the overall lifespan of my MacBook Pro and its battery?

In general what are the recomended practices to extend the lifespan of my batter and other general practice to extend the lifespan and characteristics(such as performance and speed) like new on my MacBook Pro which this past fall (2011)?

About Batteries in Modern Apple Laptops
Apple - Batteries - Notebooks
Extending the Life of Your Laptop Battery
Apple - Batteries
Determining Battery Cycle Count
Calibrating your computer's battery for best performance
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Battery University
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utilities are: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior.  Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.

Similar Messages

  • Best practice on extending the SIEBEL data model

    Can anyone point me to a reference document or provide from their experience a simple best practice on extending the SIEBEL data model for business unique data? Basically I am looking for some simple rules - based on either use case characteristics (need to sort and filter by, need to update frequently, ...) or data characteristics (transient, changes frequently, ...) to tell me if I should extend the tables, leverage the 'x' tables, or do something else.
    Preferably they would be prescriptive and tell me the limits of the different options from a use perspective.
    Thanks

    Accepting the given that Siebel's vanilla data model will always work best, here are some things to keep in mind if you need to add something to meet a process that the business is unwilling to adapt:
    1) Avoid re-using existing business component fields and table columns that you don't need for their original purpose. This is a dangerous practice that is likely to haunt you at upgrade time, or (worse yet) might be linked to some mysterious out-of-the-box automation that you don't know about because it is hidden in class-specific user properties.
    2) Be aware that X tables add a join to your queries, so if you are mapping one business component field to ATTRIB_01 and adding it to your list applets, you are potentially putting an unnecessary load on your database. X tables are best used for fields that are going to be displayed in only one or two places, so the join would not normally be included in your queries.
    3) Always use a prefix (usually X_ ) to denote extension columns when you do create them.
    4) Don't forget to map EIM extensions to the extension columns you create. You do not want to have to go through a schema change and release cycle just because the business wants you to import some data to your extension column.
    5) Consider whether you need a conversion to populate the new column in existing database records, especially if you are configuring a default value in your extension column.
    6) During upgrades, take the time to re-evalute your need for the extension column, taking into account the inevitable enhancements to the vanilla data model. For example, you may find, as we did, that the new version of the S_ADDR_ORG table had an ADDR_LINE_3 column, and our X_ADDR_ADDR3 column was no longer necessary. (Of course, re-configuring all your business components to use the new vanilla column can also be quite an ordeal.)
    Good luck!
    Jim

  • What is the best practice for using the Calendar control with the Dispatcher?

    It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security.  However, the Calendar relies on this endpoint to build the events for the calendar.  On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works.  We've noticed the same behavior on the Geometrixx site.
    What is the best practice for using the Calendar control with Dispatcher?
    Thanks in advance.
    Scott

    Not sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
    Example: http://www.cariboowoodshop.com/wood-shop.html

  • What's the best practice to manage the page file?

           
    We have one Hyper-v Server running windows 2012 R2 with 128 GB RAM and 2 drives (C and D). It setup Automatically manage page file size for all drives. What's the best practice to manage the page file?
    Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

    For Hyper-V systems, my general recommendation is to set the page file to 1-4 GB. This allows for a mini-dump should something happen. 99.99% of the time, Microsoft will be able to figure out the cause of the problem from the mini-dump. It does not make
    sense on a Hyper-V system to set aside enough space to capture all the memory on the system because only a very small portion of that memory is used by the parent partition. Most of the memory is under control of the individual VMs.
    Yes, I had one of the Hyper-V product group tell me that I should let Windows manage it.  A couple of times I saw space on my system disk disappear because the algorithm decided it wanted all the space for the page file.  Made it so I couldn't
    patch my systems.  Went back in and set the page file to 1-4 GB and have not had any issues since.
    . : | : . : | : . tim

  • What is the best video editing software i can get for a macbook pro without slowing my computer way down

    What is the best video editing software i can get for a macbook pro without slowing my computer way down. I need it to be able to take hd videos. With the camera i got i can't even upload my videos to imovie.

      MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions
    http://www.apple.com/support/macbookpro
    http://www.apple.com/support/
    http://www.apple.com/support/iphoto
    You stumbled on a Mac Tower forum, not notebooks.
    If you are running 10.6.8 then you must have bought it 3-4 yrs ago?
    Might want to check the specs and then look at various programs and their requirements as to whether Final Cut Express and ah, you want to import media to an app, not "upload."
    http://www.apple.com/support/imovie
    http://www.apple.com/support/finalcutexpress
    Checked AppStore, Google or even the forums for various Apple programs.

  • What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?

    What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?

    I agree with teh OWC sggestion above, but why must it be USB powered? I find that far more unreliable, and the low power devices slow.
    I'd frankly get a good external enclosure and buy a bare drive.  But the OWC stuff is quite good - vastly better than some of the majors (WD being aprime example of stuff that's boderline quality and often not compatible)
    Grant

  • I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

    Good Morning,
    I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
    I also rebooted holding down the shift key and still no Snow Leopard
    Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
    thank you.

    Have you restarted holding down the Opt key?  That procedure should give you a gray screen with all of the partitions that exist.  Then select the SL partition for boot.  Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

  • What are some best practices for Effective Sequences on the PS job record?

    Hello all,
    I am currently working on an implementation of PeopleSoft 9.0, and our team has come up against a debate about how to handle effective sequences on the job record. We want to fully grasp and figure out what is the best way to leverage this feature from a functional point of view. I consider it to be a process-related topic, and that we should establish rules for the sequence in which multiple actions are inserted into the job record with a same effective date. I think we then have to train our HR and Payroll staff on how to correctly sequence these transactions.
    My questions therefore are as follows:
    1. Do you agree with how I see it? If not, why, and what is a better way to look at it?
    2. Is there any way PeopleSoft can be leveraged to automate the sequencing of actions if we establish a rule base?
    3. Are there best practice examples or default behavior in PeopleSoft for how we ought to set up our rules about effective sequencing?
    All input is appreciated. Thanks!

    As you probably know by now, many PeopleSoft configuration/data (not transaction) tables are effective dated. This allows you to associate a dated transaction on one day with a specific configuration description, etc for that date and a different configuration description, etc on a different transaction with a different date. Effective dates are part of the key structure of effective dated configuration data. Because effective date is usually the last part of the key structure, it is not possible to maintain history for effective dated values when data for those configuration values changes multiple times in the same day. This is where effective sequences enter the scene. Effective sequences allow you to maintain history regarding changes in configuration data when there are multiple changes in a single day. You don't really choose how to handle effective sequencing. If you have multiple changes to a single setup/configuration record on a single day and that record has an effective sequence, then your only decision is whether or not to maintain that history by adding a new effective sequenced row or updating the existing row. Logic within the PeopleSoft delivered application will either use the last effective sequence for a given day, or the sequence that is stored on the transaction. The value used by the transaction depends on whether the transaction also stores the effective sequence. You don't have to make any implementation design decisions to make this happen. You also don't determine what values or how to sequence transactions. Sequencing is automatic. Each new row for a given effective date gets the next available sequence number. If there is only one row for an effective date, then that transaction will have a sequence number of 0 (zero).

  • What is the best Practice to improve MDIS performance in setting up file aggregation and chunk size

    Hello Experts,
    in our project we have planned to do some parameter change to improve the MDIS performance and want to know the best practice in setting up file aggregation and chunk size when we importing large numbers of small files(one file contains one record and each file size would be 2 to 3KB) through automatic import process,
    below is the current setting in production:-
    Chunk Size=2000
    No. Of Chunks Processed In Parallel=40
    file aggregation-5
    Records Per Minute processed-37
    and we made the below setting in Development system:-
    Chunk Size=70000
    No. Of Chunks Processed In Parallel=40
    file aggregation-25
    Records Per Minute processed-111
    after making the above changes import process improved but we want to get expert opinion making these changes in production because there is huge number different between what is there in prod and what change we made in Dev.
    thanks in advance,
    Regards
    Ajay

    Hi Ajay,
    The SAP default values are as below
    Chunk Size=50000
    No of Chunks processed in parallel = 5
    File aggregation: Depends  largely on the data , if you have one or 2 records being sent at a time then it is better to cluster them together and send it at one shot , instead of sending the one record at a time.
    Records per minute Processed - Same as above
    Regards,
    Vag Vignesh Shenoy

  • What are some best practices to work with Compressor 3 droplets and new Compressor 4?

    I have purchased Final Cut Pro X / Motion 5 and Compressor 4 from the App Store. My installation of Final Cut Studio 6.0.6 / Motion 3.0.2 / Compressor 3.0.5 has been moved to a new folder "Final Cut Studio". I have started the old version of Motion first as advised in this document.
    I just tried to use my old Compressor 3 droplets and i am able to convert as before.
    I am wondering what I should do now and what the best practices are
    Use the old droplets and stick with Compressor 3?
    Import the droplets to a new location to be able to use them in Compressor 4?
    Recreate new droplets with similar settings within Compressor 4?
    What are the changes I can expect from using Compressor 4?

    I've found that it helps to meet with each person in your new org that you'll be supporting. Start with the Eloqua Admin(s) and ask for an overview of standard reports, naming conventions, folder structure, processes, etc. Make sure to do the same with sales operations, too. If you're moving into an admin role ask for the data dictionary so you can study it to understand how the data maps from front end CMS to MAP to CRM.
    The next phase would be to meet with field marketing and campaign managers. Ask them about current projects, future projects and how you'll support their success with Eloqua.
    And last but certainly not least - process documentation! Ask for all of those things and you'll be rocking and rolling in no time.
    Good luck in your new role!

  • What is the best solution to watch cable TV wirelessly on my MacBook Pro?

    Hi all. I know this isn't a direct AppleTV question but I thought I may find a solution in this forum.
    I just purchased a MacBook Pro and I want to watch cable TV wirelessly. I have an old Formac Studio TVR thats held up pretty well over the years which I have hooked up via FireWire to my PowerMac.
    I have...
    -Comcast Cable Box w/DVR
    -Formac TVR
    -Netgear WPN824 v2 Router (ethernet 10/100 only)
    -MacBook Pro (core 2 duo 2.4ghz)
    I'm open to purchasing new items but I want to hear what solution works best before doing so. I've seen some specs on Slingbox but I wonder if Apple has or is working on a solution.
    thanks in advance.

    I have the $149 Slingbox Solo. It connects directly to my Digital Cable box/DVR. You can watch it on a wired or wireless connection. Quality varies according to the speed of the connection. On a local network, the quality is actually excellent. You control the box by an on-screen remote control. As note by others, you can watch remotely from anywhere with an internet connection. It works very well with my Mac as well as various laptops (MacBook pro and a Sony Viao). I also have an Elgato and a Miglia tuner - neither of which can do anything wirelessly. The Slingbox does take control of the cable box. Overall, I am very impressed with the Slingbox and would highly recommend it.

  • Recently my iPad3 and iPhone5 stopped synching automatically to iCloud. Around the same time I backed them both up to my Macbook Pro and installed the iOS6 update. Any thoughts or help is appreciated!

    Recently, I noticed that my iPhone5, iPad 3 and iPod Touch 4th Gen stopped backing up to the iCloud automatically despite ALL of them doing so previously, without a single problem. A few weeks ago I bought a Macbook Pro and I backed up all 3 devices to it a couple times (and they still backed up to the iCloud by themselves without a problem). A few days ago, I noticed that ALL 3 OF THEM stopped backing up to the iCloud automatically. Around the same time, I backed them up to my Mac and I also downloaded the iOS6 update. I'm not sure what is wrong. Has anybody else experienced this type of problem? I'm NOT very familiar with MAC computers as this is my first one and I've been learning a lot as I go. I don't know if I did something in the setting's of iTunes when I backed the devices up that could have caused the decives to stop backing up to the iCloud automatically. I did notice on my previous laptop (a Gateway) and on this one (the MacBook Pro) that on each device, I had to go into "Setting's" on each device and turn the "iCloud Backup" back to the  "On" position! That was right after I backed them up to each computer. I attempted to fix it yesterday by adjusting the setting's in iTunes, but nothing worked. If anyone can help, I would sincerely appreciate it. Thank you!!!

    Ok, I can try those things this afternoon. I have to leave now and won't be able to try for several hours. I'll let you know how things turn out. Thank you again. Also, I am not sure what DNS Setting's are regarding the router and how to change them. Thank you again for trying to help me with this. One side note. I noticed yesterday on another post regarding this topic, a man said he changed his iCloud email from one to another. I have two. One is and @me.com address and one is an @icloud.com address. I switched them around the other day. One device had @me.com as the one the email one be sent from (I think that was the phone) and I believe the iPad 3 had @iCloud.com as the other. Well, I switched them both to @icloud.com. In the post I mentioned a man said that he did that to his, and it worked. That was a few days ago and this was around the same time I began noticing the devices not synching to iCloud like they should. Right now I have for the iCloud email account (on both the iPhone and the iPad) @iCloud.com as the setting that any emails from that account would be sent from and the @me.com is also turned to the "On" position on both devices. I figured that if I'm sending an email from an iCloud account it should say "@iCloud.com" after it rather than "@me.com" after it. I just did that so everthing was the same on both devices and out of personal preference. No other reason really as I don't ever use the account to email anyone and have never given either address to anyone. Only Apple has them and they sent a couple things initially and I never receive anything on that account (for the most part). Ocasionally I get something from Apple and that's a rarity. I don't know if that may factor in at all or not. It did for one gentleman. Thank you randers4!

  • I have just acquired an iMac desktop. I want to sign on to my airport wireless network, but cannot remember the password. How can I access the password or reset it. I already use a MacBook Pro and an iPad on the network.

    I have just acquired an iMac desktop (about 4 years old). I want to connect to my Apple airport wireless network, but cannot remember the password. How can I access the password or, if necessary, reset it. I already use a MacBook Pro and an iPad on the network and don't want to jeopardize what already works well. I am not all that computer literate.

    How can I access the password or, if necessary, reset it.
    Read the user manual that came w/your Airport router or you can cross-post in one of the  AirPort Forums for instructions. 

  • What are some cool ways to use my iPhone 5 with my MacBook Pro ?

    I just bought a new MacBook Pro and was wondering what types of cool ways I could use my iPhone 5 with my new Mac.

    iphoto is pretty cool as you watch photos update : D
    Imessage is pretty sweet. to text someone on your phone then hope onto your Mac and text them from imessage : D
    (USCG Mechanic with an Apple problem)

  • What product can I buy that will provide portable power to my MacBook Pro and iPhone and iPad when I am flying?

    What product can I buy that will supply portable power to my MacBook Pro, iPhone and iPad when I am flying?
    I recently was on an extended trip and the port for charging at my seat was not working.

    Unfortuntly you can't.
    The Apple Airline adapter is only meant to keep a fully charged battery from draining, however with newer computers requiring more power, they tend to drain the battery AND the power at the same time, thus require more power hook up without the computer running to charge the battery.
    Since your iPhone and iPad charge off USB, that's going to drain the MacBook Pro battery as well.
    To generate enough power to charge all three will require a portable generator which of course can't be used on a plane.
    The best you can do is have all three charged up before you board the plane, and use each for as long as you can.

Maybe you are looking for

  • How can we Delete the Duplicate AUC or reverse AUC Valueswith out hiting GL

    Hi, we have the Dulicate AUC which are having  Duplicate AUC asset balances.   We have been excluding the AUC assets when we run reports ever since in order to tie out to GL.  It would be best if we can either reverse them out or load some offsetting

  • Simple solution to getting advanced features working on iWeb 1.1

    I've been rather frustrated with the problems with iWeb 1.1, but after a couple of hours of experimenting, I now have a solution and theory about the problem. For a quick summary, scroll to the bottom of the post. I have a site with a small blog a fe

  • VW WIFI Auto-On No Longer Works

    I updated my Droid Incredible yesterday to GB 2.3.4 and now the VW WIFI Auto-On app is no longer working.  It had actually been working poorly over the last couple of weeks, whereby it wasn't turning the WIFI radio off.  Now it is no longer turning t

  • Sharing apps between your iPhone and iMac

    How do you share apps from your iPhone to your iMac?

  • DVD Burner for i book G4?

    Hi, I have downloaded and edited a film on i movie, and assumed i could burn it onto a DVD. (I bought the computer for i tunes so didn't check out its other programs. Therefore i don't really know whether the computer has a DVD drive installed?) I wi