What are the color values for imessage and send buttons?

I am trying to paint my room. Does anyone know the specific colors of the 'imessage bubble' or the 'send' button on the iPhone, iPad, iTouch. The RGB or Hexidecimal values would work. Thanks!

Use the DigitalColor Meter app located in your utilities folder. This will allow you to hover over areas of your screen and it will display whatever type of values you want it to.
Translating this into a paint chip number at the hardware store might be a bit of an issue though. There is no method (at least that I'm aware of) to translate computer color codes to paint swatches.

Similar Messages

  • What are the optimal values for mac and arp timeout values

    Hi Guys.
    What are the best values for "mac address-table aging-time" and "arp timeout" by following scenarios?:
    - single sg300-10 as layer3-switch with a maximum of 10 local (direct connected) hosts
    - and a 3750x-stack with 100 local hosts + hsrp with a other stack of the same sort
    or for asa 5520 as internet gateway for 500 clients?
    I use at the moment a mac aging-time from 300 seconds and a arp timeout from 3600 seconds.
    Is this o.k.?
    Thanks.

    Marvel.
    As far as enhancing the CLI, it will of course be enhanced when new firmware releases provide new features. As far as making it more IOS-like, best to my knowledge, no.  The only other supported CLI on the SB switches are on the SX500 series and SX200E series which the CLI are all consistent. If you bought a SX500 series the commands are nearly identical minus the different feature sets.
    -Tom
    Please mark answered for helpful posts

  • What are the possible values for the JOB status?

    What are the possible values for the JOB status in the table TBTCP and significance for each?

    Hi,
    Have a look at include LBTCHDEF.
    The standard include from SAP.
    -> Definitions and Constants for Function group BTCH
    Kind Regards
    Raymond

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • What are the table names for CRM and APO?

    hi friends,
    what are the table names for CRM and APO?
    Regards
    suneel.

    hi Suneel,
    check in crm forum
    Re: SAP-CRM Tables
    BUT051 BP Relationship: Contact Person Relationship
    Similar to BUT050 , additionally contains Contact Person’s Address data
    BUT0BK Business Partner: Bank Data & Details
    BP Number, Bank Key, Bank Country Key, Bank Account Number
    BNKA Bank Master Data
    BUT100 BP: Roles
    ADR2 Telephone Numbers (Business Address Services)
    ADR6 SMTP Numbers (Business Address Services)
    Contains Email – Id of the BP.
    ADRC Addresses (Business Address Services)
    BP’s Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
    TSAD3T Table containing the Title text against a Title No.
    COMM_PRODUCT Master Table for Product
    CRMM_BUAG Master table for Business Agreement
    CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
    Note:
    1. It doesn’t store the Business Partner
    responsible for the transaction. To
    get the Partner No, link it with
    CRM_ORDER_INDEX.
    2. This table can be used for search
    based on the Object Id(Business
    Transaction No).
    CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
    CRMC_PROC_TYPE Master table Business Transaction Type
    CRMC_PARTNER_FCT Definition of Partner Functions
    SCPRIOT Priorities for Activities with priority text.
    CRMC_PROC_TYPE_T Text for a transaction type
    CRMC_ACT_OBJ_T Objective Number and Text for Activities
    TJ30T All the status code and text
    CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
    IBIB : Installed Base/Ibase
    IBIN : Installed Base Components
    COMM_PRODUCT : Products
    CRMC_T077D : customer account groups
    CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
    CRMD_ORDERADM_H Business Transactions CRM
    CRMD_ACTIVITY_H Activity
    CRMD_OPPORT_H Opportunity
    BUTOO : Customer details
    BUT001 BP: General data II
    BUT100 BP: Roles
    BUT150 BP relationship: Attribute table (test
    different
    BUT_HIER_TREE Business Partner Group Hierarchy
    CDBC_T_PRODUCTID Mapping: Product Id
    CDBD_ORGMAN Business transaction - organizational unit -
    set
    COMC_PRODUCT General Product Settings
    COMC_R3_FIELDS Assignment of R/3 material master fields to
    CFOP
    COMM_CATEGORY Category
    COMM_CFGMAT Basic Data for Materials
    COMM_HIERARCHY Category Hierarchy
    COMP_TYPES Hierarchy Tool: Comparison Type Check
    Table
    CRMC_CPRICPROC Customer Pricing Procedures
    SMOKVBEZ15 Assignment employees to positions
    CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
    CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
    SMOFSUBTAB : Mapping & Parameters
    SMOFDSTAT : Download Monitor (R4AM1)
    SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
    SMOFOBJECT Definition of Objects for Download
    SMOFOBJPAR Parent Objects of an Object in Table
    SMOFPARSFA Middleware Parameter
    SMOFQFIND Queue Finder Table for MW-Queue finder
    SMOFTABLES Definition of Tables for Download

  • What are the default values for "default if unwired"?

    How do you know what the default value for an object will be...if using a "use default if unwired" with an event case?
    Is there a listing somewhere of what default values will be?
    Thank you,
    cayenne

    tst wrote:
    Personally, I would highly recommend disabling this on every single tunnel coming out of an event structure (with the possible exception of the tunnel going to the loop's stop terminal). If you use this option, you are almost guaranteed to forget to wire a required value into a tunnel at some point in the future when you add a new case.
    More generally, I think that this option should not be the default for these tunnels. You can see more about this here and I would suggest voting it up if you agree with it - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Outp​ut-tunnels-from-event-structure-should-default-to-​...
    VERY much agreed!  Disabling the "default if unwired" option makes absolutely certain that you have considered the correct value for every case.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • What are the data targets for 0EC_PCA_1 and 0EC_PCA_3?

    Hi,
    I am looking at help.sap.com but not able to find out the data flow from these two datasources.
    0EC_PCA_1 (Profit Center Accounting - transaction data) and 0EC_PCA_3 (Profit Center Accounting - Line Item).
    What are the data targets and further flow for these data sources?
    Thanks,
    Akshara

    Hi,
    Data source  - 0EC_PCA_1 and cube - 0PCA_C01
    Data source - 0EC_PCA_3 and Cube - 0PCA_C01.
    you can use same cube for two data sources.
    Standard multi providers - 0PCA_MP01 and 0PCA_MC01.
    Thanks

  • What are the APN values for Blackberry 9630 Tour?

    I have an application to communicate with my server, what are the values I need to set the APN Settings?

    Or if you're feeling creative, try THIS

  • What are the valid values for CPU in conditional disable structure config?

    After diggin' around for some time (but to no avail)...
    Does somebody know the valid values for the CPU (symbol) in the conditional disable structure configuration or where I can find this information?
    Best regards,
    Horst

    Not sure but you can try this:
    http://zone.ni.com/reference/en-XX/help/371361E-01/lvprop/app_apptarget_cpu/
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • What are the accepted values for each Maps parameter in the Apple URL Scheme?

    I'm interested in a complete enumerated list of the acceptable VALUES (as in KEY=VALUE) for the URL Scheme defined https://developer.apple.com/library/ios/featuredarticles/iPhoneURLScheme_Referen ce/MapLinks/MapLinks.html
    Obviously some of those parameters have an enumerated list, some are freeform. I'm just interested in the enumerated ones.

    Hi,
    Have a look at include LBTCHDEF.
    The standard include from SAP.
    -> Definitions and Constants for Function group BTCH
    Kind Regards
    Raymond

  • What are the default values for the NetStream.multicast***** properties

    I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
    I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
    I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
    Sorry for my poor english, Thanks.

    the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream.  in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit.  setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher.  if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4).  this is for safety.  we recommend you always leave push enabled.
    each peer (including the publisher) can change the multicast stream parameters dynamically.  changes are local to that peer.
    for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called.  example:
       var ns:NetStream = new NetStream(netConnection, groupSpecification);
       ns.multicastWindowDuration = 10; // change default for everybody
       ns.publish("mystream");
       ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
    each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick.  overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received.

  • What are the allowed values for nsmerge?

     

    As requested, elaboration on the question. Is available in 4.11 & 5.0 via Console as follows:
    Directory Server.Directory tab.NetscapeRoot.<domainname>.Global Preferences.Common
    it appears as multi-valued attribute (nsmerge). Out of box is configured with {nsuniqueattribute}ADD_IF_EMPTY, {nsuseridformat]ADD_IF_EMPTY, {nsuserrdncomponent}ADD_IF_EMPTY & {nsgrouprdncomponent}ADD_IF_EMPTY.
    We have changed the naming attribute for a user entry to be cn. We use an external application to create the entries in the DIT (it does not add a userid); the entries are created. However, if you attempt to change an attribute in one of these user entries (via Console) & then save the change, an error is tossed saying data is missing (userid -> it is blank). We are trying to disable the mandatory userid. Any insight on how to achieve this objective would be most welcomed.

  • What are the possible values for a check box?

    I'm trying to fill a pdf with a asp.net web form. I'm getting the text boxes filled ok, but I'm having trouble setting the check boxes. I am testing to see if a web form check box is checked. if it is, I tried to set the pdf checkbox value to "on". But this doesn't seem to be right.
    My asp.net code is like:
    If CheckBox1.Checked Then
             af.SetField("pdfbox1", "On")
    End If
    Any suggestions?
    Thanks

    The value is the value entered into the "Export Value" option when the form is created. You can use the Acrobat JavaScript "exportValues" property to get the array of values for the same named check boxes. And if you know the 'widget' of the check box, you can use 'isBoxChecked' method to check if a given 'widget' is checked. More information is contained in the Acrobat JavaScript doucmentation.

  • What are the default values for dom.max_chrome_script_run_time for FFVersions 25 through 30 ?

    I have run across issues that creep up. The timeout setting of
    dom.max_chrome_script_run_time
    seems to be 20 seconds in FF 25.0.1 and 10 seconds in FF 30
    I was wondering if you have release notes for all versions from
    [25, 30] so that I can know all of the different timeout values?
    Thanks,
    -Charlie

    Can you post a screenshot that shows a different default value of one of those prefs?
    Note that it is possible to modify the default value via a mozilla.cfg file in the Firefox program folder.
    See:
    *http://kb.mozillazine.org/Locking_preferences
    *http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

  • What are the Flash alternatives for iphone and ipad?

    Hello,
    I would like to know what could be the Flash alternatives for iphone, ipod, and ipad. I would like to create iphone applications that have 3D animation I usually create with Flash.
    But since Apple does not support the use of flash, I need to know what applications or programming languages I must use to create movies or animations for iphone or ipad.

    I would like to create iphone applications
    Then you need to go here:
    http://developer.apple.com/programs/iphone/

Maybe you are looking for