What are the consequences of using mismatched wattage power cords on macbooks?

I am fortunate enough to have a macbook air, a macbook pro, and a macbook at my house. Sometimes the power cords get mixed up. What are the consequences of using the lower wattage macbook air power cord with the macbook pro and vise versa?
Paul

It will work but it isn't recommended. The PSU of the MBA will be charged for the maximum amount of power it can deliver so it might break sooner than normal, but I doubt you'll ever notice it if you're not doing this on a daily basis. It might also be possible that your MBP will not charge (as fast) from the MBA PSU.
The other way around is no problem since the device will only ask as much power from the PSU as is needed.

Similar Messages

What are the consequences of changing the scratch disc??

What are the consequences of changing the scratch disk? Everything was fine with my project until I tried to work on a new project for someone else. I uploaded new footage to a new session and changed the scratch disk to my other external hard drive. Now there is confusion with my initial project..

This is something we all live with. You have to be careful going back and forth between projects, if you are using different scratch disks for each. If you are editing a project on one scratch disk, then start a new project on another, remember to switch back to the original scratch disk when you go back to the original project. Otherwise render files will wind up on the wrong drive, or worse, you will capture to the wrong drive. Each issue is correctable by managing your media over to the proper drive, and deleting then deleting from the other.

HT4236 i am syncing my 6228 photos, can I stop the procedure in mid operation. what are the consequences

I am presently syncing my ipad for the first time.
i am at step 8 of 8
syncing 6228 photos.
it is taking a long time.
can I stop the procedure at this stage with no consequence.
if any what are the consequences.

Do matters improve if you update to iPhoto 9.4.1?
iPhoto 9.4.1
From the release notes for the new version:
What's New in Version 9.4.1
Improves the reliability of syncing to iOS devices via iTunes
Fixes an issue that could cause iPhoto to quit unexpectedly when using the Export command
Addresses an issue that could cause iPhoto to quit unexpectedly when upgrading multiple books, cards, and calendars
Resolves an issue with downloading and viewing photos synced from Facebook albums

I overcharged my ipad 2 battery for about 3 hours. what are the consequences, i overcharged my ipad 2 battery for about 3 hours. what are the consequences

i overcharged my ipad 2 battery for about 3 hours. what are the consequences? and there are these tiny fibers and dust that enters insideipad screen. how will i clean them. .please help

Relax, you cannot "over" charge it. The built in charging protection ensures it will not overcharge the battery or do any damage leaving it plugged in. Many folks (myself included) leave our iPads and iPhones plugged in overnight, all night, so they are charged and read for use the next day.

What are the main tables using in vendor performance report.

what are the main tables using in vendor performance report.
how many select statements are in ABAP reports.

Refer the links -
vendor performance report !!!
vendor performance report
vendor performance report
I need standard vendor performance report
Regards,
Amit
Reward all helpful replies.

What is an ageing report? What are the data sources used to develop an agin

Hello BW gurus,
I was going thru some of the BW resumes. I could not understand some of the points mentioned below. Kindly go thru them and please explain each of it.
Thank you.
TR.
     Developed AR ageing report, created invoice layout and processed invoices.
What is an ageing report? What are the data sources used to develop an aging report
     Worked on month-end and year end processes such as Balance Sheet Statements and Profit and Loss Accounts.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
     Involved in the end to end implementation of BW at Reliance Group as a team member.
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or
a full life cycle project?
     Extensively worked on BW Statistics to optimize the performance of Info Cubes and to create Aggregates.
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes.
What are aggregates why do you need them?
     Prepared design documents from the Business Requirement documents and identified the
relevant data targets for satisfying the customer requirements.
What are the design documents does one prepare, please give an example.
Is cube a data target?

What is an ageing report? What are the data sources used to develop an aging report
Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
customer (credit) for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
Requirement gathering, blueprint creation, development etc
Refer to posts on Sap Methodology and Sap lifecyle
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
Please check these links
http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
What are the design documents does one prepare, please give an example.
Design document is basically a document to say how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets to be used and how data shld be stored for providing the client a solution they need.
Is cube a data target?
Yes cube is a data target.
Hope this Helps
Anand Raj

What are the key fields used to group double orders in t-code SDD1?

What are the key fields used to group double orders in t-code SDD1?
Cheers,
VT

Hi,
You can group the duplicate sales documents with the help of the following fields,
Sold-To-Party,Document type,date and sales area details.
Regards,
Gopal.

What are the advantage of using a passive monitoring technique ?

What are the advantage of using a passive monitoring technique

Hi Plawansai,
I saw your question that is still unanswered.
I believe an advantage of using a passive monitoring technique is that it won't interfer with live traffic, as it does not inject traffic into the network or modify the traffic that is already on the network.
One drawback anyway, is that post-processing time can take a large amount of time with passive monitoring!
A combination of the two monitoring methods seems to be the route to go.
V.

What are the implications of using jquery version 1.10.2 rather than the version (1.7.1) that Adobe

What are the implications of using jquery version 1.10.2 rather than the version (1.7.1) that Adobe uses? Thanks
Bob

I am having trouble when my Edge Animate composition (banner ad) appears on a web page that uses jquery version 1.8.23. Some of the functionality of the host page no longer works. This occurs only when my composition is present & the functionality returns when another ad is displayed (either a Flash ad or a gif). It happens in Chrome Version 31.0.1650.63 m, Chrome Version 33.0.1738.0 canary & IE 11.
I had edited my Edge Animate files to use the Adobe CDN option & to point to another server (mine) so only the html file was needed to be placed in the ad rotator & on the host's server. I now have edited them again to include the Google CDN locations for version jquery 1.10.2 (http://ajax.googleapis.com/ajax/libs/jquery/1.10.2/jquery.min.js). I am waiting for the host site to try this updated html file. When I visit just this new page & the old one that pointed to 1.7.1 for that matter, it works fine.
Thank you for taking the time to read and answer my message.
Bob

What are the UI components used in oracle adf?

what are the UI components used in oracle adf?

Web.:
- ADF Faces and Trinidad JSF components
http://docs.oracle.com/cd/E28280_01/apirefs.1111/e12419/toc.htm
Desktop:
- MS Excel
http://www.oracle.com/technetwork/developer-tools/adf/overview/index-085534.html
Mobile
- AMX UI Components for Android and iOS
Frank

What are the transactions we use day to day in the bw before go live

what are the transactions we use most in the bw before go live?
Tcodes for backend objects like creating infocube and so on.
Tcodes for front end objects like creating queries and so on.
Thank you.
York

Hi Les,
check previous posting
Transaction Codes for BW Developers
SAP BW n R/3 transactions.
table TSTCT contains all the transaction codes
RSA6 Maintain DataSources
RSA7 BW Delta Queue Monitor
RSA8 DataSource Repository
RSA9 Transfer Application Components
RSD1 Characteristic maintenance
RSD2 Maintenance of key figures
RSD3 Maintenance of units
RSD4 Maintenance of time characteristics
RSDBC DB connect
RSDDV Maintaining Aggregates
RSIMPCUR Load Exchange Rates from File
RSISET Maintain InfoSets
RSKC Maintaining the Permittd Extra Chars
RSLGMP Maintain RSLOGSYSMAP
RSMO Data Load Monitor Start
RSMON BW Administrator Workbench
RSOR BW Metadata Repository
RSORBCT BI Business Content Transfer
RSORMDR BW Metadata Repository
RSPC Process Chain Maintenance
RSPC1 Process Chain Display
RSPCM Monitor daily process chains
RSRCACHE OLAP: Cache Monitor
RSRT Start of the report monitor
RSRT1 Start of the Report Monitor
RSRT2 Start of the Report Monitor
RSRTRACE Set trace configuration
RSRTRACETEST Trace tool configuration
RSRV Analysis and Repair of BW Objects
SE03 Transport Organizer Tools
SE06 Set Up Transport Organizer
SE07 CTS Status Display
SE09 Transport Organizer
SE10 Transport Organizer
SE11 ABAP Dictionary
SE24 Class Builder
SE80 Object Navigator
RSCUSTA Maintain BW Settings
RSCUSTA2 ODS Settings
RSCUSTV*
RSSM Authorizations for Reporting
SM04 User List
SM12 Display and Delete Locks
SM21 Online System Log Analysis
SM37 Overview of job selection
SM50 Work Process Overview
SM51 List of SAP Systems
SM58 Asynchronous RFC Error Log
SM59 RFC Destinations (Display/Maintain)
LISTCUBE List viewer for InfoCubes
LISTSCHEMA Show InfoCube schema
DB02 Tables and Indexes Monitor
DB14 Display DBA Operation Logs
DB16 Display DB Check Results
DB20 Update DB Statistics
r/3 (bw related)
SBIW BIW in IMG for OLTP
BD61 Activate Change Pointers - Generally
BDLS Convert Logical System Names
BF11 Application Areas
RSA2 OLTP Metadata Repository
RSA3 Extractor Checker
RSA5 Install Business Content
RSA6 Maintain DataSources
RSA7 BW Delta Queue Monitor
RSA8 DataSource Repository
RSA9 Transfer Application Components
RSO2 Oltp Metadata Repository
RSO3 Set Up Deltas for Master Data
LO setup table
OLI1BW INVCO Stat. Setup: Material Movemts
OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
OLI3BW Reorg.PURCHIS BW Extract Structures
OLI4BW Reorg. PPIS Extract Structures
OLI7BW Reorg. of VIS Extr. Struct.: Order
OLI8BW Reorg. VIS Extr. Str.: Delivery
OLI9BW Reorg. VIS Extr. Str.: Invoices
OLIABW Setup: BW agency business
OLIFBW Reorg. Rep. Manuf. Extr. Structs
OLIIBW Reorg. of PM Info System for BW
OLIQBW QM Infosystem Reorganization for BW
OLISBW Reorg. of CS Info System for BW
OLIZBW INVCO Setup: Invoice Verification
Check out AHP's reply specifically in the link:
urgent
Assign Points if Helpful *****
Regards,
Ravikanth

Deletion of setup data : what are the consequences ?

Hello,
I am a sap basis guy, and currently perfroming an Upgrade (4.7-->ECC6).
during the preparation phase, I had some problems with BW estraction data that correspond to the symptoms described
in sap note 1083709; I executed the report RMCEXCHK and deleted the content of the setup data "02" and "11".
This is still harmless , as we are in the QAS system, but I'm concerned about the upcoming upgrade of the production environneemnt.
What are the consequences of deleting the setup tables ?
I'm really confused about what need to be done after the upgrade, regarinf the BW setup tables that have been emptied :
Do you know if :
The setup tables "02" and "11" should be reconstructed ? This should be done when no users are connected?
BW delta loads "02" and "11" will still be operationals ? Or do we need to plan new BW initializations ?
are there any others side effects of deleting the setup tables ?
Thank you in advance for your help.
Regards.

Hello,
Before upgradations all the users will be locked and there wont be any transactions in the surce system....
concerning to delta queues there....All the data have to be extracted before upgradation from delta queues into BW this is important.
Concerning to setup tables....there wont be any problems if you delete, because there wont be any oads going on at this time....
Its always preferable to have some sort of communication with BW guys at upgradation time, make one check list what need to be done before upgradtion and after upgradtion...speak with BI people they will explain their steps...and as a basis guy you can prepare your check lists.
Filling of setup tabless....no need to be done from your side that BI people will do if it is required.
no initializations required after upgradtions.
Regards,
pavan.

What are the business scenarios used in plastic industry

Hi Experts,
Could you guys please tell me what are the business scenarios (in sap sd) i should use while implementing in plastic industry (as if someone already worked on implementation project at plastic industry).....
As per my knowledge i would use:
MTS
Batch management
Third party etc....
but in addition to these (if anyone already worked on the implementation project in plastic industry...then what are the business scenario used for......please suggest.....)
If have any idea please suggest........ would be a great help.......
Thank you in advance...........

it depends which part of the value chain you are working at e.g. your company is B2B, supplying ingredients to Plastic industry manufacturer or you sell to wholesellers.
Below are the processes you - may - do in Plastic industry -
- Inter-company stock transfer
- Subcontracting
- Contracts
- QM inspection during delivery process
If you require business scenario descriptions (in brief) for the above processes, then please convey.
Edited by: Typewriter on Jul 11, 2011 11:30 AM

What are the KEYstroke(s) used to CLOSE the active tab in the web browser?

What are the KEYstroke(s) used to CLOSE the active tab in the web browser? I am reluctant to use a mouse where I can use keystrokes, as the mouse is a much slower process. In fact, can I find a list of all key strokes which can be used in Firefox, e.g. ALT+S followed by R (once or more) and ENTER used to restore previous browsing session; or CTRL+F to search for a specific word or term? Thank you.

http://support.mozilla.com/en-US/kb/Keyboard+shortcuts
http://www.7is7.com/software/firefox/shortcuts.html
http://www.mvps.org/dmcritchie/firefox/keyboard.htm

What are the limitations of using labview 8.5.1 developers suite verses a real-time module in field point applications?

What are the limitations of using labview 8.5.1 developers suite verses a real-time module in field point applications? Can an exe. be loaded onto a field point controller or does the controlling program have to reside on a PC for example?

centerbolt is correct, you can't load a .exe or even run a program on the fieldPoint controller unless you have the Real Time module. However, that does not mean you can't use your FieldPoint bank without the Real Time module.
From LabVIEW for windows you can make calls to the fieldpoint IO using the fieldpoint read/write functions.
This program runs on the PC not the FieldPoint controller. If you loose network connection to the fieldpoint, your program will loose connection to the IO. For many data logging applications this type of arrangement can work just fine. However, if this is the only type of application you are ever going to run, then you may as well not buy the Real Time controller for your fieldpoint but the network controller only.
If your application requires more reliability, and/or greater determinism than can be achieved by running a program on windows, then you should use the LabVIEW Real Time module and develop a program that can run down on the FieldPoint controller independent of windows.
Message Edited by StevenA on 07-22-2008 04:14 PM
SteveA
CLD
FPGA/RT/PDA/TP/DSC
Attachments:
fp pallet.PNG ‏6 KB

What are the consequences of using mismatched wattage power cords on macbooks?

Similar Messages

Maybe you are looking for