What are the default display settings on MBP?

I have been working on finding the best setting for a new video projector in conjunction with my MacBook Pro.
So I found one - but then when I went back, restarting, the MBP, I thought I was going blind! I have tried a few settings in display, but at the moment they all look "off."
I want to go back to default -- can someone please tell me what that is?
Thanks!
Patty

The brightness is fine - what I am wondering about is
the resolution.
Is default 1440, 900 and Millions?
That seems to be about right now - feels better to
the eye!
Patty
Hi Patty,
Yes, that is the correct resolution. 1440X900 is default.

Similar Messages

What are the default font settings for 7.0.1 I have messed with them a bit and now my text is blotchy. I want to start clean.

I tried to adjust font settings to a font that I prefer and a size I can read. It was all kind of messed up so I searched what the default settings should be to start at ground zero again which I found but now it is worse. The main issue is that text is blotchy, dark some places, light another. Monitor is new so it's not issue. What exactly are the Default settings for 7.0.1 I'm not sure mine are correct ??? What other things can I look at if the default doesn't improve everything? I have Windows 7 and turning clear text on or help has no effect. PLEASE HELP ???

You can see the defaults in a screenshot in this KB article:
* https://support.mozilla.com/kb/Some+text+shows+up+bold+after+upgrade
You can check the font setting in: Tools > Options > Content : Fonts & Colors > Advanced
Default Font: Times New Roman (16)
Fonts for : Western
Proportional: Serif (16)
Serif : Times New Roman
Sans-serif : Arial
Monospace : Courier New (13)
[X] "Allow pages to choose their own fonts, instead of my selections above"
Are there any problems reported in the Graphics section at the bottom of the Help > Troubleshooting Information page?
If you have an ATI graphics display try to disable "Morphological Filtering" in the Catalyst display driver:
* Catalyst Control Center > 3D Settings > Disable Morphological Filtering
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

What are the default trackpad settings for the MacBookPro13 (Mid 2012'), What are the default trackpad settings for the MacBookPro13 (Mid 2012')

Could anyone answer the question above, with detail? I would like the defaut trackpad settings, and preferably others of the MacBookPro of the Mid 2012 model?
Im running OS X 10.8.2

your home folder should have the permissions set as you state them.
Everything inside your home folder (like Music, Documents and others) should be more like
you: read&write
staff: no rights
everyone: no rights
but if you are the only user of your Mac, these settings have little importance to you.
to repair the permission boot into recovery (pressing command + R before you hear the start up sound. Then start Disk Utility from the Utility menu and choose Repair permissions. See this article for a detailed set of instructions. It's a little older, but still valid-

What are the default settings for ethernet, shows connected but no internet

What are the default settings for ethernet ? shows connected but no internet via ethernet.
It used to work fine but I think i have changed something getting my airport to work.
Now i only get internet via wifi.
Thanks in advance

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

What are the best import settings for iTunes - AAC 160 / AAC 192 / MP3??

Hi I originally imported all my treasured CDs to iTunes several years ago, and they've served me well (AAC 128 - default setting) but in recent times hard-drive sizes have trebled and my much loved iTunes Library has not been updated.
I am thinking of re-importing all of my original CDs - as I think now that hard-drive space would allow for a higher quality but at the same time I do not want to fill my hard-drive completely with music - hence my question;
WHAT ARE THE BEST IMPORT SETTINGS CONSIDERING SIZE AND QUALITY?
(I know this has probably been asked a million times, but I did a search and nothing came up that answered my Q - also all the answers that came up in Google search where dated 2003/ 2004 - a little out-dated me thinks!!)
Rachael

Personally I've started ripping everything Apple Lossless. That way I hope I never have to rip again.
I used to rip 320 mp3. I couldn't tell the difference between 320 mp3 and lossless, but, one day I might be able to - big maybe. But since disk price is not likely to go up, I figured I'd rip lossless from now on "just in case."
Probably few, if any, people could tell the difference between 256 AAC and lossless (I've done it at 192, but never at 256, and I have not bothered trying again recently - there might be a song out there where I could hear the difference, hence ripping lossless from now on - my time costs more than disk space . . .)
256 AAC is a pretty safe bet, unless you need mp3 compatibility, then use 256 (or 320) mp3.

What is the default time settings in Process chains

Hi,
What is the default time settings in Process chains.
How to set time settings for daily,weekly,monthly loads in Process chains.
What is the time settings that we have to take care when creating meta chains.
Thanks,
Madhu.

Hi Madhu,
The Time settings for any PC is done in the start variant of the PC. There is nothing like default time setting. These settings are totally depended on the requirement and system performance. It is a general rule of thumb to load the data during a time when the user activity is minimum as the loading process is going to occupy many dialog as well as background WPs. So, if you schedule them at a time when there are many users on the system, they might feel that the system is slow. Hence, you decide as to what is the best time for scheduling a PC. The same applies to meta chain also. In case of meta chains, you make sure the dependencies of the local chains is also handled. Hope this helps.
Thanks and Regards
Subray Hegde

CS3 - What Are the Best Export Settings for Animation?

I have edited a project in Premiere Pro CS3. It is animated, and I want to preserve as much of the quality of the animation as I can.
What are the best possible settings that I can use to export the video to a .MOV file?
A little background info, in case it helps:
The animations were created in After Effects, and the .MOV files were made with the Animation codec.
After editing in Premiere, I exported the finished file to the Animation codec. It looks so-so.
Important: I imported the Premiere Project into After Effects, and exported the project with After Effects. The After Effects Quicktime file looks better than the Premiere version of the Quicktime file. (And has a higher data rate, in case that matters.)
What kind of settings do I need to select in Premiere when I export the video to make the .MOV file look as good as it can?
(And please don't be afraid to dumb it down.)
Thx!

Try an Uncompressed "QT" file. (Component YUV - 10-bit)
BTW: Did your PPRO Settings match the AEFX Comp you exported from?

What are the default parameters for PER_EVENTS api

Dear Experts,
Can you tell us what are the default parameters for PER_EVENTS API.Here below I have pasted the API.
procedure create_event
(p_validate in BOOLEAN default FALSE
,p_date_start in DATE
,p_type in VARCHAR2
,p_business_group_id in NUMBER default NULL -- HR/TCA merge
,p_location_id in NUMBER default NULL
,p_internal_contact_person_id in NUMBER default NULL
,p_organization_run_by_id in NUMBER default NULL
,p_assignment_id in NUMBER default NULL
,p_contact_telephone_number in VARCHAR2 default NULL
,p_date_end in DATE default NULL
,p_emp_or_apl in VARCHAR2 default NULL
,p_event_or_interview in VARCHAR2 default NULL
,p_external_contact in VARCHAR2 default NULL
,p_time_end in VARCHAR2 default NULL
,p_time_start in VARCHAR2 default NULL
,p_attribute_category in VARCHAR2 default NULL
,p_attribute1 in VARCHAR2 default NULL
,p_attribute2 in VARCHAR2 default NULL
,p_attribute3 in VARCHAR2 default NULL
,p_attribute4 in VARCHAR2 default NULL
,p_attribute5 in VARCHAR2 default NULL
,p_attribute6 in VARCHAR2 default NULL
,p_attribute7 in VARCHAR2 default NULL
,p_attribute8 in VARCHAR2 default NULL
,p_attribute9 in VARCHAR2 default NULL
,p_attribute10 in VARCHAR2 default NULL
,p_attribute11 in VARCHAR2 default NULL
,p_attribute12 in VARCHAR2 default NULL
,p_attribute13 in VARCHAR2 default NULL
,p_attribute14 in VARCHAR2 default NULL
,p_attribute15 in VARCHAR2 default NULL
,p_attribute16 in VARCHAR2 default NULL
,p_attribute17 in VARCHAR2 default NULL
,p_attribute18 in VARCHAR2 default NULL
,p_attribute19 in VARCHAR2 default NULL
,p_attribute20 in VARCHAR2 default NULL
,p_party_id in NUMBER default NULL -- HR/TCA merge
,p_event_id out nocopy NUMBER
,p_object_version_number out nocopy NUMBER
);

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

What are the best export settings to use...

Operating system: Vista SP1
Camera: Canon HF100 (1900x1080 HD quality 29.97fps) -- uses AVCHD compression which is H.264 I believe.
I'm able to watch my camera video files in Vista nicely. However, I'm having trouble with the watching the results of my edited and exported videos. Assuming I want the same quality and playability as the source video, what settings should I use in the export?
In the export settings window... I select:
Format: H.264
Preset: HDTV 1080p 29.97 High Quality
Source files have the extension: .m2ts
...I don't change the other values. Then I export. Now the result is an .mp4 file which does not play in Windows Media Player. It does play in Quicktime or iTunes however it plays jerkily... I would like to be able to play it as smoothly as the original source plays... And I'd like to be able to play it in windows media player just as the source can be played in media player. Media player seems to play the source more smoothly than does iTunes or Quicktime.
So what are the best export settings for me so that I can watch my edited HD video on my computer as easily as the source footage???
I've been able to edit and save the results of the edit using the crappy ImageMixer3 video editor that comes with the camera. The results are perfect and play in windows media fine. The files it exports the edited video as is the same as the soure... the file extension is .m2ts
So the problem is how to get Adobe to export the edited video to an .m2ts file or at least to a file type that plays as nicely in my system?

See
Exporting to iPods, cell phones, PSPs and other mobile devices in the PPro Help for details.
Cheers
Eddie
PremiereProPedia
RSS feed)
- Over 350 frequently answered questions
- Over 300 free tutorials
- Maintained by editors like
you
Forum FAQ

Will migration assistant change the default display settings on my new Mac?

I just set up a new iMac and used Migration Assistant to load from my Time Machine. But now the display looks muted and not as bright. Would Migration Assistant change the default display settings on my new Mac?

Migration Assistant may not be the cause. But you should reset the NVRAM and see it that fixes the issue.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the third time.
Release the keys.

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

What are the proper print settings to print two sides, landscape and bind on the short side?

what are the proper print settings to print two sides, landscape and bind on the short side?

This is a question best asked in the appropriate product forum.

What are the report-relevant settings in the hierarchy maintenance?

What are the report-relevant settings in the hierarchy maintenance?

Hi,
See these links.
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
assign points if this helps.
Thanks.....................
vasu...................

PUBLIC database account on oracle 10g - what are the default privilages?

Hi there,
I was wondering what are the default privileges to PUBLIC database account on oracle 10g R2. Could somebody explain it? Thank you in advance.

There is not a user PUBLIC. There cannot be a user PUBLIC. Users and roles share the same name space so if there is a role PUBLIC, there can not be a user PUBLIC.
The catalog table user$ contains both roles and users. The usage is determined by the TYPE# column - 1 = user, 0 = role.
select user#, name, type# from user$ order by 1
sys@esdb01:pncl# /
     USER# NAME                               TYPE#
========== ============================== ==========
         0 SYS                                     1
         1 PUBLIC                                  0
         2 CONNECT                                 0
         3 RESOURCE                                0
         4 DBA                                     0
         5 SYSTEM                                  1Try it yourself and see.
SQL> create role foo;
Role created.
SQL> create user foo identified by bar;
create user foo identified by bar
ERROR at line 1:
ORA-01920: user name 'FOO' conflicts with another user or role name

What Are The Default Music Icons On iTunes 10?

What Are The Default Music Icons On iTunes 10?
So far I have:
Alternative
Blues
Classical
Country
Dance
Electronic
Folk
Christian & Gospel
Hip-Hop
Jazz
Latin
Pop
R&B
Reggae
Rock
Vocal
World Fusion
Which ones am I missing?

the default apps would vary by region
this is whats in most models below
facebook
hi five
youtube
real player
ovi music
radio
bounce tales
these are whats on most models but they would vary by region and operator
some others would have extra or even less
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

What are the default display settings on MBP?

Similar Messages

Maybe you are looking for