What are the default values for dom.max_chrome_script_run_time for FFVersions 25 through 30 ?

I have run across issues that creep up. The timeout setting of
dom.max_chrome_script_run_time
seems to be 20 seconds in FF 25.0.1 and 10 seconds in FF 30
I was wondering if you have release notes for all versions from
[25, 30] so that I can know all of the different timeout values?
Thanks,
-Charlie

Can you post a screenshot that shows a different default value of one of those prefs?
Note that it is possible to modify the default value via a mozilla.cfg file in the Firefox program folder.
See:
*http://kb.mozillazine.org/Locking_preferences
*http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

Similar Messages

What are the default values for "default if unwired"?

How do you know what the default value for an object will be...if using a "use default if unwired" with an event case?
Is there a listing somewhere of what default values will be?
Thank you,
cayenne

tst wrote:
Personally, I would highly recommend disabling this on every single tunnel coming out of an event structure (with the possible exception of the tunnel going to the loop's stop terminal). If you use this option, you are almost guaranteed to forget to wire a required value into a tunnel at some point in the future when you add a new case.
More generally, I think that this option should not be the default for these tunnels. You can see more about this here and I would suggest voting it up if you agree with it - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Output-tunnels-from-event-structure-should-default-to-...
VERY much agreed! Disabling the "default if unwired" option makes absolutely certain that you have considered the correct value for every case.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

What are the default values for the NetStream.multicast***** properties

I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
Sorry for my poor english, Thanks.

the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream. in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit. setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher. if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4). this is for safety. we recommend you always leave push enabled.
each peer (including the publisher) can change the multicast stream parameters dynamically. changes are local to that peer.
for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called. example:
   var ns:NetStream = new NetStream(netConnection, groupSpecification);
   ns.multicastWindowDuration = 10; // change default for everybody
   ns.publish("mystream");
   ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick. overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received.

What are the optimal values for mac and arp timeout values

Hi Guys.
What are the best values for "mac address-table aging-time" and "arp timeout" by following scenarios?:
- single sg300-10 as layer3-switch with a maximum of 10 local (direct connected) hosts
- and a 3750x-stack with 100 local hosts + hsrp with a other stack of the same sort
or for asa 5520 as internet gateway for 500 clients?
I use at the moment a mac aging-time from 300 seconds and a arp timeout from 3600 seconds.
Is this o.k.?
Thanks.

Marvel.
As far as enhancing the CLI, it will of course be enhanced when new firmware releases provide new features. As far as making it more IOS-like, best to my knowledge, no. The only other supported CLI on the SB switches are on the SX500 series and SX200E series which the CLI are all consistent. If you bought a SX500 series the commands are nearly identical minus the different feature sets.
-Tom
Please mark answered for helpful posts

What are the possible values for the JOB status?

What are the possible values for the JOB status in the table TBTCP and significance for each?

Hi,
Have a look at include LBTCHDEF.
The standard include from SAP.
-> Definitions and Constants for Function group BTCH
Kind Regards
Raymond

What are the default parameters for PER_EVENTS api

Dear Experts,
Can you tell us what are the default parameters for PER_EVENTS API.Here below I have pasted the API.
procedure create_event
(p_validate in BOOLEAN default FALSE
,p_date_start in DATE
,p_type in VARCHAR2
,p_business_group_id in NUMBER default NULL -- HR/TCA merge
,p_location_id in NUMBER default NULL
,p_internal_contact_person_id in NUMBER default NULL
,p_organization_run_by_id in NUMBER default NULL
,p_assignment_id in NUMBER default NULL
,p_contact_telephone_number in VARCHAR2 default NULL
,p_date_end in DATE default NULL
,p_emp_or_apl in VARCHAR2 default NULL
,p_event_or_interview in VARCHAR2 default NULL
,p_external_contact in VARCHAR2 default NULL
,p_time_end in VARCHAR2 default NULL
,p_time_start in VARCHAR2 default NULL
,p_attribute_category in VARCHAR2 default NULL
,p_attribute1 in VARCHAR2 default NULL
,p_attribute2 in VARCHAR2 default NULL
,p_attribute3 in VARCHAR2 default NULL
,p_attribute4 in VARCHAR2 default NULL
,p_attribute5 in VARCHAR2 default NULL
,p_attribute6 in VARCHAR2 default NULL
,p_attribute7 in VARCHAR2 default NULL
,p_attribute8 in VARCHAR2 default NULL
,p_attribute9 in VARCHAR2 default NULL
,p_attribute10 in VARCHAR2 default NULL
,p_attribute11 in VARCHAR2 default NULL
,p_attribute12 in VARCHAR2 default NULL
,p_attribute13 in VARCHAR2 default NULL
,p_attribute14 in VARCHAR2 default NULL
,p_attribute15 in VARCHAR2 default NULL
,p_attribute16 in VARCHAR2 default NULL
,p_attribute17 in VARCHAR2 default NULL
,p_attribute18 in VARCHAR2 default NULL
,p_attribute19 in VARCHAR2 default NULL
,p_attribute20 in VARCHAR2 default NULL
,p_party_id in NUMBER default NULL -- HR/TCA merge
,p_event_id out nocopy NUMBER
,p_object_version_number out nocopy NUMBER
);

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

What are the default settings for ethernet, shows connected but no internet

What are the default settings for ethernet ? shows connected but no internet via ethernet.
It used to work fine but I think i have changed something getting my airport to work.
Now i only get internet via wifi.
Thanks in advance

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

What is the default value of EO_INBOUND_PARALLEL

Hi Gurus,
We are on PI 7.0 EHP 1. We have not set the parameter EO_INBOUND_PARALLEL. Does this mean there is only one inbound queue registered by default if the default value is 1? However, I seem to recall that when we had issues with messages stuck in queues, I have seen more than one XBTI8 queues.
Please help me with my doubt. thanks!

Hi,
Thanks for the replies.
How about the parameter EO_INBOUND_TO_OUTBOUND and EO_OUTBOUND_PARALLEL?
I assume by default EO_INBOUND_TO_OUTBOUND is set to 1?
Then what is the default value for EO_OUTBOUND_PARALLEL? Plus to set this parameter you need to specify the receiver, in this case, is it true that EO_OUTBOUND_PARALLEL is not set at all so only one outbound queue? this does not make sense. Or maybe by default EO_INBOUND_TO_OUTBOUND is set to 0 so EO_OUTBOUND_PARALLEL is not used at all?
Thanks.

What are the steps to make it seamless for a customer to use the install program and then use the installed program?

I wrote an install program (.exe) that is downloaded from a website. When run, it 1) leads a customer to browse to a directory, and 2) copies files (.exe, .dll, etc.) from a website to that directory. When I run, the installed program works.
What are the steps to make it seamless for a customer to use the install program and then use the installed program?
bhs67

This site https://msdn.microsoft.com/en-us/library/vstudio/2kt85ked%28v=vs.110%29.aspx provides a basic description of the Visual Studio Windows Installer.
Near the bottom of the page is "You can unlock all the features of InstallShield by paying to upgrade to the full version of InstallShield." Where do I find info that describes the differences between the "free" and the "full"
versions?
bhs67
Hello,
The default feature does support the task for your requirement, so there is no need to pay for the other features unless you want to use some feature which is not free.
In addition, as this thread
InstallShield LE not available with VS 2012 RTM? shared, even through there is a link to InstallShield LE in the New Project dialog under Deployment solutions, but it belongs to third-party that I would recommend you consider posting this issue
at the following forum to get supports about InstallShield.
http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What Are the Index Values of the MTTR and MTBF of the MA5600?

What Are the Index Values of the MTTR and MTBF of the MA5600?

The networking environments are different and the device uses different boards. Therefore, the reference value of the MTBF of the MA5600 is 55 years and the reference value of the MTTR of the Field Replaceable Unit (FRU) is two hours. The preceding values
are only for reference. For details, contact the related Huawei engineers.
http://www.huanetwork.com/smartax-ma5600-series-price_c43

What are the default userid and password to logon to Oracle Applications

What are the default userids and passwords to logon to Oracle Applications Manager?

There r no any default password for Application Manager,
However userID is applmgr and if I have to create a password for applmgr I would do that as welcome or welcome1 so the applmgr user can change it when he/she log on first time as needed.

What is the default value of Vector?

what is the default value of the Vector? now another main thing i have generate one vector with fix size like
Vector v=new Vector(5);
now the thing is that suppose i add sixth element at that time it's size will be 10 or will be 15.
Vector v1=new Vector(15);
now i add 16 the elment so at that time vector size is 25 or it will be 30??

ya i get it your point let's i explain which i understand from your side ok
Vector v=new Vector(10,15)
so in this case it's size is 10 right when i add 11the element at that time it's size is 25 right?
Vector v1=new Vector(5);
in this case the it's size is 5 right and when i add 6th element at that time it's size will be double in short 10 in this case right.
Vector v2=new Vector();
in this case the default size is 10 right when i add 11th element at that time it's size is 20 right
If my understanding is wrong then pl'z explain this thing with examples
waiting for your reply.

What is the default value of iterator's rangesize in pageDef.xml

there are two jspx file,one named by browsePage,another editPage.they use the same VO. and i can go into editPage from browsePage by commandButton or commandLink .
the rangesize of the iterator in browsePage is 10, like this
<iterator id="SysTabColorView1Iterator" RangeSize="10"
Binds="SysTabColorView1"
DataControl="SysManageAppModuleDataControl"/>
usually in editPage, it like the following
<iterator id="SysTabColorView1Iterator" RangeSize="10"
Binds="SysTabColorView1"
DataControl="SysManageAppModuleDataControl"/>
now i have a question ,when i dont set the value of RangeSize in editPage, what is the default value of this iterator.
other business, when i set the value to 1 , it will occur the famous error ,
JBO-

Hi,
if you are browsing to the edit page from the browse page it doesn't matter what the range size is. If you've navigated though the ranges on the browse page then you will be in the correct range set and ranging won't be a problem.
Brenden

What are the Non SAP data sources supported for Analysis workbooks?

AO 1.4 SP6
BO 4.1 SP2
What are the Non SAP data sources supported for Analysis workbooks?
Thanks.

HANA is a data source (which could contain non-SAP data)
For other Excel front-ends that may connect to "non-SAP" data look at Live Office or Power BI by Microsoft - see Excel and Power BI connectivity to SAP BusinessObjects Universes | Power BI

What are the settings in i phone 4s for connecting internet in mobile data ?

what are the settings in i phone 4s for connecting internet in mobile data ?

Did you ever get a reply to this. I have the same problem. I have the same problem when even when I reply to an email... no photo shows up in my new reply message. The only way I have figured out is to use the "forward" option.
But this still does not solve the problem when people email me back... I have no idea what photo they are speaking of. Instead of a photo... there is a <photo name of some sort>.
Let me know if you ever hear on this one.
Many thanks.

What are the default values for dom.max_chrome_script_run_time for FFVersions 25 through 30 ?

Similar Messages

Maybe you are looking for