What are the different discounts in the UK ?

I'm outside of the UK now so I couldn't reach Apple UK.
I want to know how much is the educational discount and how much is the Apple on Campus discount (for an 11" MacBook Air).

Hi Avinash,
chk out the function codes.
Batch
The following commands can be entered in correction mode ('Process in foreground' or 'Display errors only') when processing a batch input session:
/n This terminates the current batch input transaction and characterizes it as
/bdel This deletes the current batch input transaction.
/bend This terminates batch input processing and sets the session to Failed
/bda This switches from Display errors only to Process in foreground
/bde This switches from Process in foreground to Display errors only
Reward Points For the Same.
Regards,
Harini

Similar Messages

My iPhone was stolen and I have contacted the police who are using the meid number to locate. How does this work and what are my chances of getting the phone back?

My iPhone was stolen. I used Find My iPhone app to lock it and display a message. The phone has not connected to the internet to locate it. I contacted the police and they have taken my meid number. How does this work and what are my chances of getting the phone back? Are there other ways the theif can use it. I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes. If they do that, they'll probably keep him under surveilance for a year or so before they act.
Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
I'm sorry, but that's the way it is.

HT4993 on my computer there are two different accounts for the itunes store but my brothers account keeps syncing in on my iphone instead of my own account how do i get his account off of my phone and add my own back?

on my computer there are two different accounts for the itunes store but my brothers account keeps syncing in on my iphone instead of my own account how do i get his account off of my phone and add my own back?

Not a good idead to share IDs
Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
Read Sharing an Apple ID with your Family
Does your father have a recent backup of his phone? If so restore his phone from that. Please not that everythign created on th ephone since the backup was made will be lost

What are options available to cancel the Excise Invoice?

Hi,
What are options available to cancel the Excise Invoice?
Does cancelling the commercial invoice automatically cancels the excise invoice
if not what are the other options?
Any settings required to achieve that.
Usefull answers will be rewarded
Thanks
Regards

Dear Rajiv
No cancelling commercial invoice will not cancel the excise invoice in background. For that, you need to run the T.Code J1IH where if you click on Cancel Excise Invoice, system will ask for excise invoice reference, financial year and series group. Here while giving the excise invoice number, you have to ensure that it is preceded with zeroes as you can see in J1I7.
thanks
G. Lakshmipathi

Just bought an IPod nano 7th generation. I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?

Just bought an IPod nano 7th generation. I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?
Thanks to your feedback.

Click here, check that your computer meets the requirements, purchase and install the DVD, and run Software Update.
(74380)

What are strengths and weaknesses of the sap.m.Shell and sap.m.App as container for an application wrapper?

My question today: What are strengths and weaknesses of the
sap.m.Shell
and
sap.m.App
as container for an application wrapper?
I currently use non of them, but I see the advantages.
SAP best practise is to use one of them or nest them as shell > app. What are strengths and weaknesses of the approaches?

We prefer to say, the tender mercies of the Fetch block.
You'll notice the "wfm info" cluster as an output of the Fetch
VI. This cluster has gain and offset members- use these to scale
your binary data to floating point voltage representation.
As you point out, the numbers won't be exactly what you expect given
the vertical range and the device resolution. There are a few
reasons for this. First, we don't use the absolute full scale of
the ADC for the maximum input voltage. There are a couple of
codes of headroom at the top and bottom. This allows your input
signal to slightly exceed the specified vertical range without clipping
(you'll get a warning from the driver). Second, these gain and
offset numbers take into account calibration information for your
device. Using these numbers will correct for small deviations
from the ideal offset and gain.
So if you use the gain and offset numbers from the driver, your
measurements will be more accurate than if you assume 0 offset and
perfect gain. They will be most accurate if you make sure to
perform a self-calibration once the device is in your system and at the
temperature that your tests will be run.

How to view what are all programs maped with the event....

I am new to this events concept - could you please say
in SM64 we can give Event....
<b>How to view what are all programs maped with the event..</b>
Thanks in advance.

Hi Sam,
See these links:
How-to trigger a process chain using ABAP?
Re: scheduling process chain 3 specific times a day
NOTE: If you want to trigger the process chain from R/3, there are many examples in this forum. However, since the search function is not working now, I suggest you look at OSS Note 135637. This will show you how to do it also.
Hope this helps.
concerning to sm64 ..
Triggering events manually ...
Events let you start background jobs when particular changes in the R/3 System take place. When an event occurs, the background processing system starts all jobs that were scheduled to wait for that event.
example : JOB_OPEN to create a background job..
When scheduling a background job, you can specify it to start "after event".
If you do so, you'll have to create an event in SM62.
If a job is scheduled after event event and you trigger the event with SM64, the job will start.
Events can be raised by external systems in SAP by sending a command to a SAP application server. You can also raise event in any program using function mosule BP_EVENT_RAISE.
Reward if helpful.
Regards,
Harini.S

What are Crypto Cards, and what are they different from Java Cards?

Hi,
I just heard the name 'Crypto Card'. I thought Java Card is the only standard for smart card. Could anyone tell me what are Crypto Cards, and what are they different from Java Cards? Thanks in advance.
Joey

Probably any card that offers cryptographic capabilities (crypto coprocessor) could be called "Crypo Card", but likely the term was referred to cards offering a pkcs#11 interface.
Pkcs#11 is the standard for accessing crypto devices, like tokens, cards, or accelerators. Such a device can be easily accessed for example from your browser to perform cryptographic and digital signature operations.
A Javacard can operate as a pkcs#11 device in you install on it an applet dealing with the pkcs#11 requests.

If i buy a new ipad and bring it to England will it still work with the different voltages and the 3G/4G?

if i buy a new ipad and bring it to England will it still work with the different voltages and the 3G/4G?

They both seem to cover the same 3G bands - from http://www.apple.com/ipad/specs/ :
Wi-Fi + 4G for AT&T model: 4G LTE (700, 2100 MHz); UMTS/HSPA/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz)
Wi-Fi + 4G for Verizon model: 4G LTE (700 MHz); CDMA EV-DO Rev. A (800, 1900 MHz);UMTS/HSPA/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz)
CDMA isn't any use here as there aren't any UK CDMA based carriers, they are all GSM/sim card based (I'm not aware of any CDMA carriers in Europe). As the AT&T version appears to support an extra 4G LTE band then that might be the better one.

I was trying to do a favor for my gf, and I uninstalled bonjour. What are my next steps with the cloud and ios5

I was trying to do a favor for my gf, and I accidentily on purpose uninstalled bonjour. It has seemed to really screw up iTunes for me. What are my next steps to get this back to normal? I have downloaded and using the icloud and ios5. I have two iPhones 3gs and our iPad2. And our computer is windows xp(yes it is time for an upgrade)

Try the troubleshooting help here. http://www.apple.com/support/iphone/assistant/phone/
You may need to restore your iPhone.
If it won't restore, try here. http://support.apple.com/kb/ht1808
If nothing helps, you need to contact Verizon for information for an exchange or refund. This is a user to user forum, not Apple.
Apple's policy for a refund or exchange is within 14 days of purchase. Verizon's policy may be different.
Definitely try restoring .. hopefully you won't have to go through the hassle of an exchange.

What are CREATOR and REGISTRAR in the V$ARCHIVED_LOG view?

Environment: Oracle 11.2.0.3 EE on Solaris 10.5
I'm not sure exactly where this question belongs since it deals with database processes, RMAN and Data Guard all in one so I'll start here and see where it takes me.
I have a Data Guard environment set up with 1 primary and 1 standby. I am running some queries against the V$ARCHIVED_LOG view to understand the view so I can better monitor the archive log activity between the databases.
I have read the documentation but am still confused over a couple of things:
1- What is the FGRD process and how can it write archive logs as seen in the CREATOR column of the view looking from the primary side? I thought only the ARCn process could do that.
2- On the standby side all the logs have LGWR as the CREATOR which makes sense since, as I understand it, the LGWR process on the primary is sending the log files to the standby via SQL*Net. I realize this is not a question. :-)
3- The documentation for the view shows RMAN as a possible value for the CREATOR column. How and where does RMAN create an archive log file?
4- Finally, for now, what is the meaning of the REGISTRAR column? What exactly is it registering since we already know the source (CREATOR), status and whether the log has been archived, applied and deleted.
Thanks very much for any light you can shed in my darkness.
-gary

garywicke wrote:
Environment: Oracle 11.2.0.3 EE on Solaris 10.5
I'm not sure exactly where this question belongs since it deals with database processes, RMAN and Data Guard all in one so I'll start here and see where it takes me.
I have a Data Guard environment set up with 1 primary and 1 standby. I am running some queries against the V$ARCHIVED_LOG view to understand the view so I can better monitor the archive log activity between the databases.
I have read the documentation but am still confused over a couple of things:
1- What is the FGRD process and how can it write archive logs as seen in the CREATOR column of the view looking from the primary side? I thought only the ARCn process could do that.I thinks its the RFS process, when its writes directly to archivelog files when standby redolog are not available and LGWR on standby wait for its confirmation. Thats why acting as forground process.
>
2- On the standby side all the logs have LGWR as the CREATOR which makes sense since, as I understand it, the LGWR process on the primary is sending the log files to the standby via SQL*Net. I realize this is not a question. :-)
3- The documentation for the view shows RMAN as a possible value for the CREATOR column. How and where does RMAN create an archive log file?It might be when you explicitly register archivelog with "REGISTER" command.
>
4- Finally, for now, what is the meaning of the REGISTRAR column? What exactly is it registering since we already know the source (CREATOR), status and whether the log has been archived, applied and deleted.
This might be because archivelog file can be generated from other resource i.e either from RFS or by registering with RMAN command REGISTER.
>
Thanks very much for any light you can shed in my darkness.
-gary

What are some new differences in the white iPhone?

i dont see anything new besides the colour, and something that looks like a second speaker.

but there are 2 horizontal bars at the top, one is for listening during calls, what is the other bar for?

What are normal operating temperatures of the i7-2620 in the X220, using TPFanControl?

So I finally got TPFanControl working on my X220 after I really started noticing the fan spinning up and producing high-pitched whine. The fan had begun to remain on all the time, even while on battery with the CPU sitting at 800MHz. I could have sworn the fan remained off a lot of the time beforehand.
So, what are the normal operating temps of the i7-2620CPU? Right now plugged in at "Balanced" speed, jumping between 2.7GHz and 800MHz and with the fan manually set to "7," 4500rpm, in TPFanControl, it shows the temperature at 63C. On battery at 800MHz, the temp goes between 50C and 60C.
CPU Utilization remains at 7% when on batteries, 0-4% while plugged in at idle.
Are those normal numbers? If not, do I have some kind of problem with the thermal paste or heatsink, or dust?

at idle? no my fan is hardly audible at idle.
what you are describing sounds like a problem with the either fan, or improper installation, in which cases you would need warranty.
If you boot the laptop into the bios menu, does the fan come on?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

What are file extension suppored by the screen painter

hai
i have small doubt at screenpainter.
what are the file extensions supported by screen painter
thanking
nagababu

It supports both files in .xml or .srf (at least I have opened both with the Screen Painter). My guess it supports any extension ... as long as the contents in the file have the right xml code on them.

VOTE FOR YOUR BEST ADDED PLUGIN. WHAT ARE SOME PLUGINS WELL WORTH THE $$

Always like to see peoples opinions about added plugins for logic pro.
WHAT ARE SOME GREAT PLUGINS WELL WORTH THE MONEY?
TYPE OF SOUND CAN BE SYNTHS/EFFECTS WHATEVER YOU LIKE.

i've stopped using external plugins cause it always ended up with some issues :
- plugins would have some bugs
- plugins would need to be updated all the time, and the new version would mess up with my songs
- automation would not work properly
- settings would not have been saved properly with the song ...
of course i'm exagerating but :
- logic already has plenty of plugins all sounding well and covering everything you need
- i don't master half of them yet
- there's always a way to achieve the same sound of an other plugin / technic, may it be less easy
- any of my songs could be opened with any Logic Pro 7 in the world
- i feel like plugins are the new video games. my friend don't play video game anymore, they download plugins and rave about the latest ones. i don't need plugins to get creative, and when i have an idea of a sound or a song, i've never thought "**** i need reaktor" or anything.
just my two cents !
bontempi

What are the different discounts in the UK ?

Similar Messages

Maybe you are looking for