What are the .fm.sp files that are created when using SharePoint?

What are the .fm.sp files that are created when using SharePoint? When I'm working with SharePoint, I've noticed that duplicate files ending in .fm.sp are created. I've been unable to find any reference or documentation about them so far.

Whe you use sharepoint as a CMS connections in Framemaker it creates the folder where Sp is installed and also a file ending .sp is created that let SP know that its the file associated with it.
.fm.sp indicates that its the framemaker type SP file.
Dont worry about it as its not creating any mess in the system.
Harpreet

Similar Messages

  • What is the av-1 file that is created when I make Quicktime Movies from FCP

    I have just experienced the -av1 phenomena for the first time.
    I have been exporting to QT movies regularly using the same internal and external drives for months - no changes, no incorrect formatting. I have used those exported movies to create One-Step DVDs in iDVD for display and distribution. This -av1 file thing is keeping me from doing that.
    The only diff with this project (and, in fact, it's a new Sequence in a Project that has successfully been exported (without the companion file)) is that this sequence had .aiff music files some of which were from iTunes (downloaded/protected).
    I thought that might be the problem, so I created mp3s (by burning to disk and re-importing) and replaced the aiff's in the timeline - it still insisted on creating -av1 files with the QT Movie.
    Help would be appreciated.
    Thanks.

    It means that the drive that you are saving these to is formatted FAT32 and has a file size limit of 2GB. Check the file sizes and see.
    If the drive was formatted MacOS Extended you won't see this issue.
    Shane

  • What is the min pulse width that can be measured using a 32-bit conter?

    what is the min pulse width that can be measured using a 32-bit conter?
    and also by chnaging the referenced Clock, can we measure as min as 10ns pulse width?

    You could measure a 40ns pulse, but not with a great degree of accuracy. Here's a good document on how counter pulse width measurements are handled:
    http://zone.ni.com/devzone/conceptd.nsf/webmain/7C77FB9EDC17C3C386256802007B8AB3
    With a 40 ns pulse, you'd have 3 counts per pulse so your uncertainty is pretty high (33%). Another way to look at it would be that you would read either 3 counts or 4 counts which would be values of 37.5ns (3*12.5ns) or 50ns depending on where the rising edges fall. So you wouldn't be able to tell the difference between a 40ns pulse and a 42ns pulse, but you would between a 40ns and a 100ns.
    Hope this helps,
    Andrew S
    National Instruments
    Message Edited by stilly32 on 09-18-2006 05:04 PM
    Getting Started with NI-DAQmx
    Measurement Fundamentals

  • [svn:bz-4.x] 16147: Fix a few more regression tests on the 4. x branch that were failing when using Spring integration.

    Revision: 16147
    Revision: 16147
    Author:   [email protected]
    Date:     2010-05-17 06:18:38 -0700 (Mon, 17 May 2010)
    Log Message:
    Fix a few more regression tests on the 4.x branch that were failing when using Spring integration.
    Modified Paths:
        blazeds/branches/4.x/qa/apps/qa-regress/WEB-INF/src/runtimeconfig/remoteobjects/ROMessage Destination.java
        blazeds/branches/4.x/qa/apps/qa-regress/WEB-INF/src/runtimeconfig/remoteobjects/RuntimeCo nfigurator.java
        blazeds/branches/4.x/qa/resources/webtier/flex_sdk_4/flex-config.xml

    Well heres my story. I tried kde4 from extra the last 3 weeks and I like it. I have used xfce for the past 3 years, previous to that gnome. Tried kde but never really liked it. Now I am only using workspace, base, mutimedia and graphics.
    Here is what I like.
    1- Dolphin, awesome I have used thunar a while and it is great but I love splitview, and fish for ssh (which has been around a while I know), and the ability to mount other partitions on my hdd with a click no fstab entry or nothin'.
    2-Pretty, I've used xfce with built in compositor an love the snappiness. But I like desktop grid with kde4 and flipswitch. Compiz-fusion is cool but I prefer not to use I'll take what the DE gives. Plasmoid are cool too.
    3- Gwenview is nice too. Use to use gqview, but thumnails are nice.
    Looking forward to or lacking
    1- Keyboard shortcuts, Yes xbindkeys is there but if I have a DE I want it to do it. They just don't work now.
    2- kde4 has windows specific settings, but I can't set the opacity for particular windows , doesn't work.
    3- Ram of course is much higher in kde4, but maybe I'm getting old I just don't care as much.

  • I just bot a new ipodnano and synched my playlists from my itunes library.  However, I am unable to disconnect as it says the the ipodnano contains files that are in use by "another application".  What is it talking about and how do I disconnect?

    How do I disconnect./eject my new ipodnano after I had synched my playlists (from itunes library on my computer).
    Itunes message - CANNOT BE EJECTED BECAUSE IT CONTAINS FILES THAT ARE IN USE BY ANOTHER APPLICATION:.
    This is after my synch was succesfull and it says I can disconnect now - but it won't let me.
    Keith

    For the immediately problem, you can shut down the computer and disconnect the iPod.
    There may be a process (program) running on your computer in the background that continuously monitors mounted volumes for things like maintenance, data corruption, and malware.  The iPod's storage is a mounted volume.  If you know of any such program, such as an "anti-virus" utility, and it has settings that allow you to exclude certain volumes, you can set it to ignore the iPod "disk" when connected.
    Also, if you are using automatic syncing (not the manual method) to load the iPod, and you have Enable disk use turned ON, turn it OFF.  With Enable disk use turned OFF, iTunes only mounts the iPods disk when syncing, then immediately unmounts the disk.  Thus, other processes you have running on your PC (not iTunes) will have less of a chance to make the disk "in use" and cause this problem.  You won't even have to eject the iPod before disconnecting.

  • Is the prores file that FCPx creates when importing c300 .mxf files stable/quality enough to then copy to other drives for further use? Are there any quality disadvantages to doing that?

    Im wondering if I can directly copy the prores files fcpx creates when importing c300 .mxf files from the "original media" folder, reimport them for another project to and use them that way. Is there any problem with working that way? I'm doing this bc I want to have an organize finder structure for a client but cant break the c300 card structure to split clips on a card into different "scenes" to make it easier for them to understand what they're looking at. This is all to stay NLE nuetral--we like fcpx but they might want to edit somewhere else and more details in the finder level seems like the best solution? Suggestions on any of that? Thanks.

    Thanks for your response. Are you sure that FCPx is working with .mxf/c300 natively? I thought it was just a background sort of repackaging or transcode into prores that it does without you having a choice? And bc of that, for me, it's sort of a "back end" feeling file: I'm curious if it's bad to get into the package contents folder to copy it over? Not about copying prores in general-- specifically, is the prores created of c300 footage in fcpx more of a fcpx, high quality alias file? Maybe I'm just feeling a little uncomfortable grabbing things from the inside/finder level of fcpx.

  • I accidentally deleted all of the exceptions to the load images automatically list. What is the list of websites that are the exceptions and how do I get them all back onto the list at once?

    I accidentally removed all sites in the tools->options->content->load all images automatically.
    I need to know what the names of these sites are and how to get them all blocked again all at once.
    == This happened ==
    Just once or twice
    == when i accidentally removed all sites from the list

    There's no way to recover this list if you deleted the items, as it's not backed up.
    Why did you have the sites blocked in the first place? You can simply re-block the sites as you see the images in order to re-build your list.

  • Where are the HTML/Source files saved on Macintosh when I click "Preview"?

    On the Mac, I typically expect files to save to my WebServer directory as:
    /Library/WebServer/Documents
    However, I cannot find the temporary html, css, scripts when I preview my site/page with the default or my localhost ip address:
    http://192.168.1.xxx:33333/Preview/website-1/index.html
    http://localhost:33333/Preview/website-1/index.html

    When working in Muse the HTML/CSS/JavaScript of the site doesn't exist.
    Unlike Edge Reflow (and the other Edge tools) Muse is not an HTML/CSS editor. Working in Muse is like working in InDesign or Word or any number of other applications. Muse has it's own representation of things and that makes it easier for us to provide a user experience that avoids many of the idiosyncrasies and limitations of HTML/CSS. It also lets up improve and evolve the HTML/CSS that's output to keep pace with the evolving web.
    With Muse HTML/CSS is only generated when a page is exported (for preview, publish, upload, etc.) and the HTML/CSS that's generated is never read back in. It's like a PDF created from InDesign. HTML/CSS is the output. It's not the original file(s).
    For the question of Web Fonts beyond those available via the Font menu, the specifcs depend on the web font hosting service you're using. However the general approach is the same. In most cases it involves applying paragraph or character styles to the text in Muse (which end up being classes in the HTML/CSS), using a web-safe font in Muse (so the code gen is live text) and then setting up the web fonts to be used by those classes.
    The snippet of code that generally needs to go in the head of each page to load the webfonts can be inserted in the Page Properties dialog for the master page (or each individual page) in Muse.
    With this approach the font will be incorrect in Muse Design view. (It will be whatever web-safe font was selected.) But it should display as the correct font when Previewed and Published/Uploaded.

  • Export/Import-SPSIte :- What is the max size limit that can be moved using this command??

    Export/Import-SPSIte :- What is the max size that can be moved using this command??

    I assume you ment Export-SPWeb not Export-SPSite command.
    There is no known limitations in file size, except the compression file size that is set to 24MB by default. If you exceed 24MB, the cmp file will be splitted into several files. You can change the default 24MB value up to 1024MB, using the -compressionsize
    parameter.

  • Are the Frame or JFrame objects not supported when used by applets??????

    Hi,
    Is there anyone to help me ?
    I've an applet which uses Frame objects. With the "appletViewer" executable the results are
    perfect.
    But Netsacape Communicator seems not to support Frames..?!? Is this possible?????
    Thanks
    deniz

    Oh..Thanks for the replies.
    But the reason was that I was still using Netscape Communicator 4.5.
    With Netscape Communicator 6.1 installed yesterday; everything is
    normal. i.e. I can observe the frames that applet creates... :-))

  • What is the current Firmware Verison that I should be using for my WRT110.....?

    I am currently using 1.0.02....Is rhus the correct one....? If not, where do I get the new one....??

    The Current Firmware version for your Router WRT110 is Ver.1.0.05 (Build 03)... Click on Download this firmware for your Router..
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • What is the role of BootStrap.ini in SCCM when using MDT

    How do I get SCCM to work with a BootStrap.ini file?
    I want my MDT BootDisk to provide information to the client in Windows PE.
    But I cant see how the BootStrap.ini works with SCCM MDT Deployments.
    Please help.
    Thanks

    Check out the ZTIMediaHook.wsf
    http://blogs.technet.com/b/mniehaus/archive/2009/09/30/mdt-2010-new-feature-20-general-purpose-configmgr-wizard.aspx
    ZTIMediaHook will import the bootstrap.ini file in order to get basic information before it continues.
    Keith Garner - keithga.wordpress.com

  • What are the brands of DVD that are easily burned

    I have somme problems to find a brand of DVD and DVD DL that my iMac accepts to burn
    Problems with TDK DVD-R and Emtec DL DVD+R
    Any suggestions or reason why these do not work (either with DVD Studio Pro or Toast )

    I would recommend Taiyo Yuden DVD+Rs.  (I get excellent results using iMovie 06 with iDVD 11.)
    http://www.supermediastore.com/product/u/taiyo-yuden-silver-thermal-8x-dvd-plus- r-media-100
    I have found DVD+R to be more reliable than DVD-R. The only disadvantage to DVD+R is that DVD players manufacture before 2003 may not play them.
    DVD+R disks are better than DVD-R disks because of the increased error correction technique used in the newer +R  standard.

  • I am not able to restore my shuffle(2nd gen) . When ever I tryr, it says that the device contains files that are open in some other application. It does not play any song and the shuffle has 50 percent "other files."

    I tried downloading reset utilities but it keeps on saying it is for 32 bit(I have Windows 7). Please HELP

    The reset utility only works with Windows 2000 and Windows XP.
    As for the files in use by another application, try rebooting the PC and iPod Shuffle and attempt to restore it again. Also make sure the "Enable Disk Use option is NOT ticked from under the iPod's Summary tab in iTunes.
    See here for instructions on resetting the iPod Shuffle.
    Resetting iPod shuffle
    B-rock

  • What are the new 10g features that are heavily used by SAP products?

    Please help list them.  Because we think that we have not exploered 10g to what we should
    have explored.
    Thanks!

    Hi Christy,
    Please check below SAP notes & links.
    Note 828268 - Oracle Database 10g: New functions
    Note 1035137 - Oracle Database 10g: Automatic Undo Retention
    Note 1035051 - Transportable tablespaces
    Note 838725 - Oracle Database 10g: New database statistics
    Note 621293 Oracle 9i/10g: Real Application Clusters
    http://www.oracle.com/newsletters/sap/docs/ora4sap-db-of-choice.090213.pdf
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/9e/6f054c93408a49ad49bde77b012319/frameset.htm
    Hope this helps you.
    Thanks
    Sushil

Maybe you are looking for