What are the log files created while running a mapping?

Hi Sasi , I have a doubt who actually generates the " Log Events ". Is it the Log Manager or Application services ?

Hi Anitha, The Integration service will be generate two logs when the mapping runs 1) Session log -- Has the details of the task ,session errors and load statistics..2) Workflow log -- Has the details of the workflow processing, and workflow errors.. The workflow log will be generated when the workflow started and the session log will be generated once the session intiated.For more detail Please refer the infa help docs... Normally the services will generate log ex: IS and RS will log their activity... The below process will happen the when the workflow inititated..[Copied fropm infa help docs] 1.#The Integration Service writes binary log files on the node. It sends information about the sessions and workflows to the Log Manager.2.#The Log Manager stores information about workflow and session logs in the domain configuration database. The domain configuration database stores information such as the path to the log file location, the node that contains the log, and the Integration Service that created the log.3.#When you view a session or workflow in the Log Events window, the Log Manager retrieves the information from the domain configuration database to determine the location of the session or workflow logs.4.#The Log Manager dispatches a Log Agent to retrieve the log events on each node to display in the Log Events window. ThanksSasiramesh

Similar Messages

What are the temporary files created by Tuxedo 8.1 in /tmp

Hello there,
I've noticed that Tuxedo is storing files into /tmp/tx000XCi002W08 !!??
Does anybody know when and why tuxedo is doing this ?
By the way is it possible to move the location of these temporary files somewhere else ?
My config infos:
- Tuxedo 8.1
- OS AIX 5.3TL6
- Domain is run using MP mode
- Domain is made of two LMIDs
Edited by [email protected] at 11/27/2007 9:03 AM

Herbert,
The temporary files stored in directories similar to /tmp/tx000XCi002W08 are
used to lock the Tuxedo VTOC (Virtual Table Of Contents) when it is updated.
This occurs when a TUXCONFIG, BDMCONFIG, or TLOG file is created, but does
not occur when the MIB updates one of these files or when a TLOG record is
written. These lock files are used to protect against two process creating,
destroying, or modifying the file list in a particular VTOC at the same
time.
As long as your application does not continually vary the location of the
TUXCONFIG, BDMCONFIG, or TLOG files, there should be only a small number of
such directories under /tmp. When Tuxedo is shut down, any such directories
can be safely removed.
Although the location of most temporary files in Tuxedo can be changed using
the TMPDIR environment variable, the location of the VTOC lock files cannot
be changed, since different processes could have different values of TMPDIR
Ed
<herbert koelman> wrote in message news:[email protected]..
Hello there,
I've noticed that Tuxedo is storing files into /tmp/tx000XCi002W08 !!??
Does anybody know when and why tuxedo is doing this ?
By the way is it possible to move the location of these temporary files
somewhere else ?
My config infos:
- Tuxedo 8.1
- OS AIX 5.3TL6
- Domain is run using MP mode
- Domain is made of two LMIDs
Edited by [email protected] at 11/27/2007 9:03 AM

When using wusa.exe to install MSU update package and enabling logging using the /log switch, what format are the log files in?

I have been installing a number of hotfixes for Windows 7 using MSU files and the wusa.exe utility included in Windows. I thought it would be a good idea to generate separate log files for each update as it was installed since wusa.exe now supports this
option using /log:<file name>. However, the log files created do not seem to be regular text files or any other log file format that I immediately recognize. When opened in Notepad or Wordpad you can see that they contain a lot of additional binary data
which can't be read by a regular text viewer.
Does anyone know what format these log files are in? What tool should you use to read them?

I have been installing a number of hotfixes for Windows 7 using MSU files and the wusa.exe utility included in Windows. I thought it would be a good idea to generate separate log files for each update as it was installed since wusa.exe now supports this
option using /log:<file name>. However, the log files created do not seem to be regular text files or any other log file format that I immediately recognize. When opened in Notepad or Wordpad you can see that they contain a lot of additional binary data
which can't be read by a regular text viewer.
Does anyone know what format these log files are in? What tool should you use to read them?
Only Microsoft can manage to design something as stupid as this. If you start wusa from the command line, it pops up the alternative command line switches. For log, it just says: " /log - installer will enable logging". It doesn't say that you
should specify the log file name, hence not HOW you specify it (" /log:<path\filename>.") It doesn't say what extension to use for the file, alas which file type it is (" /log:<path\filename.evtx>."). You open it in notepad, you cannot read it.
You open it in sccm's cmtrace.exe/trace32.exe, you get nothing. IT IS NOT POSSIBLE TO IMPLEMENT THIS IN A WORSE WAY. How can something be so bad? How can Microsoft get such stupidity inhouse, when you need to go through six interviews or something to get in??
I cannot believe it - unfortunely, this is seen again and again.

What format are the .tmp files created by hp scanner deskjet f2400?

What format are the .tmp files created by hp scanner deskjet f2400? I had a customer get the dreaded "out of space" error after scanning over a hundred pages that she was going to have all in one multipage pdf. So all that work was gone (each page was a painstaking layout of multiple elements, etc.), except for the hpfAAAA.tmp files.
I'm trying to recover the data. I should say, the data is now recovered, but now I must figure out a way to use it. How can I open these HP .tmp files? What format are they saved in? There is no human-readable header to give me a clue.
If anyone can help me, it would be much appreciated. You will be saving a very nice woman many hours of work duplicating what she already did. Thanks,

Hi LC475,
There would be no way to read the .tmp file. Unfortunately she will need to free up space on her hard drive before attempting to scan the documents again.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

What are the things taken care while using multiple suites?

Hi all,
I have created a plugin which sends the current file path to an url,
its working fine with debugging in Visual studio 2005 and while it is added to the Adobe Illustrator its works only once.
That is its sending the file path only for one file. While i tried for the second time its not working
I am using following suits in my plugin
AIDocumentSuite
AIFilePathSuite
AIActionManagerSuite
AIUnicodeStringSuite
AIURLSuite
I am using the "AIURLSuite" for calling the url and it is calling the url multiple times while its used alone, and its only working once with the multiple suites.
What are the things taken care while using multiple suites? , is it neccessary to release all variables and the suites after completing the task?
Should they released in the same order in which they are acquired?
Thanks in advance
Sreejesh K V

Hi,
The problem was with the "sAIDocument->GetDocumentModified(mod);"
The "GetDocumentModified" is crashing after executing once, i just removed that statement , and now
i am forcefully saving the document with out checking the modification status!
Its working fine now!
Could you please tell me how can we lock a plugin , or a particular function in a plugin.
There is any specific standard to use the GetDocumentModified function?
Thanks and Best Regards
Sreejesh K V

What are the tables will update while loading Master data ?

Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.

It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar

What is the source file structure while doing the BDC of mm01

What is the source file structure while doing the BDC of mm01

Hi,
first u create a meterial note the data u enterd in the screens.
if u have created the material successfully then that data structure will be the source structure of the
file.
regards.
Jagadeesh.

What are the video card requirements for running a 23" cinema display

What are the video card requirements for running a 22" cinema display(clear acrylic case) w/ a PC? My motherbaord is AGP. Thanks to anyone who can help.
Intel P4 3.0ghz Windows XP

Hi Lionel,
As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
A good place to start looking for answers is:
http://cubeowner.com/kbase_2/
Cheers!
Karl

Internet explorer is required to access some of my financial accounts; what are the risks? I am running Mac OS X 10.7.2 on a Mac Pro

Internet explorer is required to access some of my financial accounts; what are the risks? I am running Mac OS X 10.7.2 on a Mac Pro
Message was edited by: 74683msn

Advisable is irrelevant... It is not possible. There has not been a version of IE for Mac for a long time. You will have to load Windows on your Mac in order to run IE, or try making your browser mimic IE. (In Safari, go to Safari -> Preferences, click the Advanced tab and check the box to show the Develop menu. Then, in that menu, choose User Agent -> Internet Explorer x.0.) Note that doing that will not work if the site relies on some weird non-standard feature of IE that no other browser on the planet has.

What are the tools to create a digital magazine for ipad version and how can be place it in newsstand?

Hello..
"what are the tools to create a digital magazine for ipad version and how can be place it in newsstand?"
I am very tired after done a week of R&D on this issue..
But i doesn't get any fair solution for this one..
I hope this is best option to place my issue here to get quick solution..
Thanks and Regards..

We are all users here.
There is no one here from Apple.
In order for you to develop and distribute content for the iPad, you need to become an apps developer.
Not sure where you sign up for this or who you have to call.
There should be a place on Apple's site that refers to a section of the site if you want to be an Apple iOS content developer.
It cost, I believe $99 U.S. to become an Apple apps developer. You'll agree to Apple's Non-disclosure rules. You'll receive Apple's app/software developers kit,and access to Apple's app developer site.
No one here is going to be able to help you.
Good Luck.

HT5295 What are the basics of creating and distributing Podcasts?

What are the basics of creating and distributing Podcasts?

Search the web for "creating podcasts" and you'll find a plethora of information.
Regards.

What are the differences of creating a physical standby database with ASM?

I want to create a physical standby database for my 10g(10.2.0.1) database. But it is using ASM. Is it possible to create a standby database for a database using ASM?
What are the differences of creating a physical standby database with ASM?

tell us what your research shows and we'll try to
validate it. I am simulating Oracle ASM on a PC and I want to try
DataGuard on it now. So I am trying to create DataGuard
on an ASM system. The purpose is only learning and test.That's telling us how you are researching, not what you have observed.
Your research could have included looking at the documetation, and you might have found http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/scenarios.htm#sthref1642
which discusses exactly what you are looking for.
Message was edited by:
Hans Forbrich

What are the Jar files required,that for accessing the Type 4 Drivers.

what are the Jar files required,that for accessing the Type 4 Drivers.
Regards,

Well it is Database Specific.
Howevr there are few 3rd party .jar (Derby) which you can use it for accesing some standard databases.

What are the steps to create sap apo ..plz send step by steps plzzzzzzzzzzz

what are the steps to create sap apo ..plz send step by steps plz. Iam new for these ?

what are the steps to create sap apo ..plz send step by steps plz. Iam new for these ?

What are the steps to create DB connect?

What are the steps to create DB connect?

Hi,
Check the following link for DB Connect details:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40
Also please search in the forum, you will find lot of threads on this topic.
regards,
Pruthvi R

What are the log files created while running a mapping?

Similar Messages

Maybe you are looking for