What are the Methods to check the Relation between BP Number and User ID ?

Hi Colleagues,
Requirement
Hi, i need to generate a report to Management for approx 1400+ Partners and am facing some diffculties.
While i have the BP number of the partners and their email ID's, i am unable to find the USer ID (ABAP ID) that these are mapped to.
Is there any Tcode or Table(s) that i can use to find this relationship ?
Note:
I have tried Tcode BP in CRP, but am unable to find the ABAP ID in 'Identification Tab' for any Role for these partner Id's. The same can be found for Non-Partner Id's though.
I have Tried relationship between ADR6 & USR21 tables too, but it gives me output only for 500 or so users.
Rgds
Ganesh.S

Hi,
Use FM BUP_PARTNER_GET.
Regards,
Caíque Escaler

Similar Messages

Relation between Business Partner and User

Hi everyone.
Where can i found the relation between the business partnes and user in the tables of CRM application.
Thanks.
Mauricio N.

But in the database where is located this data, which is the table in the database that has the relation between business partners and users???
Thanks,
Mauricio N.

Is there any table for relation between batch number and valuation type ?

hi,
I would like to know where i can find relation between batch number and valuation type ?
thank you and Best regards
Fernand

Hello
MCHA

Relation between serial number and sales order number

Hi,
Is it any one to one relation between serial number (IN) and sales order? For example, when I create the special serial number for the special sales order (Internal or External) , whether I put the sales order number in the IQ01 or not, sales order accept that serial number(IN). Is it any way to specialize one serial number to exact one sales order number?
Edited by: Lida Navabpour on Jun 9, 2009 1:02 PM

Hi,
> Is it any one to one relation between serial number (IN) and sales order? For example, when I create the special serial number for the special sales order (Internal or External) , whether I put the sales order number in the IQ01 or not, sales order accept that serial number(IN). Is it any way to specialize one serial number to exact one sales order number?
Yes, There is one to one relation ship. U have to maintain serial number profile for the same. The serial number runs on different status.The status ESTO means the serial number is in stock. ECUS means the serial number is at customer site. AVLB means the serial number is available.
If the status is ECUS then u cant use that again.
Serail number profile Check t-code OIS2.
Thanks,
Raja

Relation Between SalesPerson, Employee and User in B1

Hi all,
I have a confusion that what is the Relation between the USER, EMPLOYEE and SALESPERSON in BusinessOne. Can anybody explain me about this relation? Like Salesperson is assigned to Employee like that.....? Who is the superior among these three? what are the roles for the USER and EMPLOYEE etc....
Thanks in Advance,
Ramu.

As Gilbert Said:
An Employee is for the HR module (Absence report, Phone Book, etc), and a Salesperson is the one who gets the comissions on sales
None of this are related to BO Users

Relation between Material Number and Material document Number.

hi xperts,
I want to Know Is there any Relation ship between the Material Number and Material Document Number.
If So can i get any Tcodes to check them?
Thanks in advance.
Message was edited by:
STALIN JOSEPH

Hi,
Thanks for your reply.
I want to Load the Inventory Management Data into Business warehouse ,there the Only way i correlate the Data between is by taking some material Number.
and Material Document.
In step 1 i load Material Number data and step 2 i load material document data,so i want to make cure those two loads i load the same material numbers.
Please help me to collerate between them.

What are the effects of checking the checkmark box in a list?

In an iTunes (Mac) list of Music, what are the effects of checking the checkmark box in a list?

If the box is left unchecked then the music will not sync or play when part of a playlist

What is the relation between adobe forms and web dynpro

hi
what is the relation between adobe forms and web dynpro

Hi Jyothsna,
Adobe forms are advanced to smartforms and scripts.
Adobe forms are much easier than smartforms they are online forms.
they can be developed online.
Adobe forms : This is another SAP tool designed to create your own forms. The transaction for this is SFP.
How to use them: You can create a sales order form in adobe form and send to the sales reps. Sales reps can fill this form when they are not connected to internet / SAP system. Once they connect to SAP just send an e-mail to a specific user id in outlook. You got to customize and code how do you want to process once you receive this form. This enables you to create orders even when you are not connected to the system. Hence no data loss. This is not how i used though :-). This is just my idea.
What is the difference between Adobe forms and smart forms / scripts.
Smart forms / scripts are used to show the data in SAP. Most likely you will use these to print / display some kind of reciepts / forms. Many companies must be using this for hard copies / ALE / EDI or to transfer data from SAP to others.
Adobe forms are used to post data into SAP from SAP too. So this has an additional feature compared to smartforms.
Please check this link
http://www.erpgenie.com/index.php?option=com_content&task=view&id=600&Itemid=77
Web dynpro in one of the component in NETWEAVER.
Web Dynpro is the SAP NetWeaver programming model for user interfaces and provides support when developing the Web representation of business applications. The Web Dynpro model is based on the Model View Controller paradigm, and has the following features that build on the classic dynpro model:
·        Clear separation of business logic and display logic
·        Uniform metamodel for all types of user interfaces
·        Execution on a number of client platforms.
·        Extensive platform independence of interfaces
please check this link
http://help.sap.com/saphelp_nw04/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
Best regards,
raam

My mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be?

my mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be? can it be a software issue with the wifi?
also i noted that it has only been doing this since quite recently, before it was fine
please help!

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Just bought an IPod nano 7th generation. I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?

Just bought an IPod nano 7th generation. I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?
Thanks to your feedback.

Click here, check that your computer meets the requirements, purchase and install the DVD, and run Software Update.
(74380)

What is the command to check the changes in the spanning-tree topology?

What is the command to check the changes in the spanning-tree topology?

Hi,
Few commands which would help are:
1- Show spanning-tree detail
2-show spanning-tree detail | in ieee|from|occur|is exec >> This will give from were the changes occuring- Ex:
C6K1#show spanning-tree detail | in ieee|from|occur|is exec
VLAN0001 is executing the rstp compatible Spanning Tree protocol
Number of topology changes 9536 last change occurred 00:00:29 ago
from GigabitEthernet4/6
3- show spanning-tree active *& show spanning-tree root >> Will give you the root information.
4- show spanning-tree inconsistentports >> If there are any port which are inconsistent state due to STP features.
STP running MST:
===============
show spanning-tree mst configuration >> Need to check and match the same outputs with the other switches running in the same MST domain/region.
show spanning-tree mst detail
show spanning-tree mst <name of the region>
Debug on STP:
============
debug spanning-tree events/bpdu >> would be good but to be run with more cautious.
HTH
Inayath
*Plz rate if this info is usefull.

My iPhone was stolen and I have contacted the police who are using the meid number to locate. How does this work and what are my chances of getting the phone back?

My iPhone was stolen. I used Find My iPhone app to lock it and display a message. The phone has not connected to the internet to locate it. I contacted the police and they have taken my meid number. How does this work and what are my chances of getting the phone back? Are there other ways the theif can use it. I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes. If they do that, they'll probably keep him under surveilance for a year or so before they act.
Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
I'm sorry, but that's the way it is.

What are options available to cancel the Excise Invoice?

Hi,
What are options available to cancel the Excise Invoice?
Does cancelling the commercial invoice automatically cancels the excise invoice
if not what are the other options?
Any settings required to achieve that.
Usefull answers will be rewarded
Thanks
Regards

Dear Rajiv
No cancelling commercial invoice will not cancel the excise invoice in background. For that, you need to run the T.Code J1IH where if you click on Cancel Excise Invoice, system will ask for excise invoice reference, financial year and series group. Here while giving the excise invoice number, you have to ensure that it is preceded with zeroes as you can see in J1I7.
thanks
G. Lakshmipathi

What is the Relation Between S_PARTY.ROW_ID AND S_PARTY.PARTY_UID

Hi,
What is the Relation Between S_PARTY.ROW_ID AND S_PARTY.PARTY_UID

Why do you need to know?
From the configuration in Tools (for instance the fields of Business Component Contact) you can see that by default they have the same value.
But if you import through EIM you can supply your own value for PARTY_UID.

How to view what are all programs maped with the event....

I am new to this events concept - could you please say
in SM64 we can give Event....
How to view what are all programs maped with the event..
Thanks in advance.

Hi Sam,
See these links:
How-to trigger a process chain using ABAP?
Re: scheduling process chain 3 specific times a day
NOTE: If you want to trigger the process chain from R/3, there are many examples in this forum. However, since the search function is not working now, I suggest you look at OSS Note 135637. This will show you how to do it also.
Hope this helps.
concerning to sm64 ..
Triggering events manually ...
Events let you start background jobs when particular changes in the R/3 System take place. When an event occurs, the background processing system starts all jobs that were scheduled to wait for that event.
example : JOB_OPEN to create a background job..
When scheduling a background job, you can specify it to start "after event".
If you do so, you'll have to create an event in SM62.
If a job is scheduled after event event and you trigger the event with SM64, the job will start.
Events can be raised by external systems in SAP by sending a command to a SAP application server. You can also raise event in any program using function mosule BP_EVENT_RAISE.
Reward if helpful.
Regards,
Harini.S

What are the Methods to check the Relation between BP Number and User ID ?

Similar Messages

Maybe you are looking for