What are the methods used for creating customer

i have to upload a text file and create customer using idoc .can any one suggest the methods used to fullfil this requirement

Hi,
Upload the file using the function module GUI_UPLOAD into an internal table then try to pass the values from the file to the segments in the idoc DEBMAS03 using the function module MASTERIDOC_CREATE_DEBMAS to create the customer.
Any doubts regarding you can clarify.
Thanks&Regards
Sarves

Similar Messages

What are the materials used for the earbuds/earphones??

What are the materials used for the earbuds/earphones?? Like whats the plastic used and what are the speaker materials and the volume button???

Hello Veronica176
The materials in Apple headphones include Neodymium magnets, oxygen-free electrolysis copper wire and a Nickel plated plug
Apple uses Neodymium magnets in their headphones as it is much more magnetic compared to that of a ferrite magnet. This also further enhances the accoustics of sound and preventing any loss of sound. Because of this, you can get the same sound out of Apple headphones as the good ol' circum-aural headphones (image attached).
Oxygen free copper wire is created through electrolysis which is furthermore considered an above average material for headphones, thus ensuring better sound quality. Oxygen free copper wire ensures a faster transfer time (as copper is one of the best conductors) and because of this, allows a faster transfer time, minimising loss. This means the sound quality of the music/sound playing may actually depend more on the quality of the MP3 file than the headphones.
The nickel plated plug used by Apple is a standard connection and joins to a female connection into the iPod (for example) which is also nickel plated. Where gold plated plugs are renowned to transfer more data and superior sound quality when connected to any device. Connecting the same metals during transfer (nickel plated plugs and nickel female connections) ensures optimum sound as the signal will not be jumping different kinds of metal. The lack of gold plating also helps to reduce the cost in manufacturing and to the customer.
If you have any more queries, please feel free to ask further questions, it is what we are here for

How to find out what are the interfaces used for Job and Job Codes

HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
Sunny

Hi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya

What are the basic steps for creating a content repository?

I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
If anyone knows of any guides that show a step by step process that would be great too.
Thanks
Paul

Hi Paul
First of all you need to create a new repository
Suppose you want to add all the documents under folder Paul under C: Drive
(Even you can put whole documents of C: drive into Paul)
Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
There you can create a new directory by clicking on button New
Give the parameters as follows :-
Name               :           Anything you like
Description       :           Anything you want
Prefix (must start with /) : Probably same as your repository name like \Paul
Lookup mode : caseless
Root Directory   : C:\Paul
NOTE: This is the trick. You need to give the proper path means folder path which you want use as repository)
Repository Services : Any services you want
Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
Security Manager         :           AclSecurityManager
ACL Manager Cache   :           ca_cm_rep_acl
The save it
Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
I think the above information will help you. If still you have problem, please feel free to contect me.
Regards,
Chamkaur

What is the method used for upload of data

Hi All,
What is the method used for upload of Data from excel spread sheets to SAP HR.
it is Bulk Data from many countries.LSMW or BDC Session Method?
what are country specific infotypes used for PA and OM.
can u plz give the list of country specific infotypes used for PA n OM Module.
Thanks
Archana

Hi Archana,
To Upload bulk data I think BDC is the best and effecient way.
Regarding Infotypes we dont have any country specific Infotypes in OM & PA. In Payroll we do have according to country wise.
I hope you had understood the point
Regards
Pavani
Remainder: Points to be given on answers

What are the classes used for bropdownListBox in BSP and purpose and how

what are the classes used for bropdownListBox in BSP and purpose and how
thank you,
Regards.
Jagrut BharatKumar Shukla

Benje001,
Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
Hope that helps!
Regards,
Shannon R.
Applications Engineer
National Instruments

What are the printers used for cheque prinitng ?

Hi all,
what are the printers used for cheque prinitng ?

Mostly SAp supports all printers( mostly used are HP ones) but all printers can be configured in SAP.
Regards,
SaiRam

What are the tables used for ACR & Master data daemon job?

Hi Experts,
What are the tables used in the backend for ACR & Master data daemon jobs. I would like to see the details of CHANGERUNMONI or ACR/Hierarchy Change run.
Kr,
Praveen

Hi Praveen,
Have you tried these tables BALHDR, BALDAT and BALOBJT for checking master date daemon delta status. It may not give you complete details. but definitely helps.. If you find any more details please do let me know..
Thanks,
Bharath

What are the tables used for this Report

hi all..
i am a fresher for ABAP. i need the help.
what r the tables used for this report.
Reports provide pending order details according to Material wise and customer wise for particular month.
thanks in advance
RK.Ashokkumar.
9994262112.

hi
good
try with these tables,
MARA
KNA1
thanks
mrutyun^

What are the main uses for a Macbook Pro, and also for a Macbook Air?

I'm curious of whether I should buy a Macbook Pro, or Macbook Air. Before I make my decision I would like to know what are the main purpaces for each Macbook.

Here's an article that compares the two.
http://news.cnet.com/8301-13579_3-57458148-37/13-inch-macbook-air-vs-13-inch-mac book-pro-which-should-you-buy/?tag=postrtcol;posts

What are the pixel dimensions for creating an Apple ibook book cover?

I'm trying to create a book cover for Apple ibooks, what are the pixel dimensions requirements?

Thanks again.
Apple seems to have made it more confusing than it should be.
As an aside, the Apple documentation contradicts itself.
Cover art (also known as a marketing image or jacket) should be at least 1400 pixels along the smaller axis and must be a JPEG or PNG file in RGB Color mode.
This clearly says the shorter side must be at least 1400 pixels. The next sentence says this:
For an average trade paperback, this could be 400 x 1400 minimum size, as the books are generally taller than they are wide.
That doesn't make sense, seeing that the shorter side is supposed to be at least 1400 pixels, meaning it should say "1400 x 4900" for the same aspect ratio.
...I did notice this too.
So, if as you say, that the Cover Art and Cover image terms are the same and the 2 million limit does not apply, then it is unclear to me why Apple sent this message to me about cover file being rejected
"Action Required: Your book could not be delivered to the iBookstore.
The following images are larger than two million pixels and must be resized:
Full ePub: Cover_xyz.jpg "
I'll probably need to have the cover file in epub and Cover Image for Asset in iTunes Producer be named differently (but be copies of the same file) so I can understand which one is the "problem" file.
And finally, why does Apple refer to Cover Art twice here and then end in last sentence with Cover Image if they are the same ( and if they are the same why not state "this cover image").
"Cover art (also known as a marketing image or jacket) should be at least 1400 pixels along the smaller axis and must be a JPEG or PNG file in RGB Color mode. For an average trade paperback, this could be 400 x 1400 minimum size, as the books are generally taller than they are wide. For best results, deliver the largest pixel dimensions possible. When possible, match cover art to the cover contained in the book file. The 2 million pixel maximum does not apply to the cover image".

What are the wagetype using for submitting tax declaration

HI all,
Please give a clarity on what the wagetype using for submitting tax declaration.
regards, Milarepa

for knowing tax declaration or tax caluculation in indian payroll , it is not dependent on only couple of wage types or infotypes it is dependent on lot of other wage types and infotypes
fro IT 580 to IT591
and for other information check the documentation of function INTAX in PE04 tcode
you should also know the wage types that caluculates tax

What are the methods available for passing data between Labview 6.0 VI and another custom windows program

The big picture is that I'm trying to use labview to interface to a DSP board.
I already have a small windows application "app" which communicates with the dsp. Now I want Labview to grab data from the "app" and plot/analyze ... etc.
I'm a novice at this 'interprocess communication stuff", what can I use to pass data back and forth between between the "app" and LV?
use ActiveX, DMA, streams, etc.?
In a crude sense I could just have the "app" write the data to a file and then have LV read the file. (can two applications read the file at the same time?), but
this seems very slow and clumsy. I'd rather have a RAM based FIFO which both could access.
Thanks!
G
Details:
Pentium120 Windows 95 Host
Spectrum TMSC30 DSP
VC++6
LV6

It depends on what 'interprocess communication' your "app" program has available.
I regulary use DDE to control a PLL App which controls our PLL via the LPT Port. This is only a write process, but works very easily. The read is equaly easy. You need to know the various "keywords" like service, topic and instruction which the "app" will respond to.
Generaly I found ActieX to be more extensive, meaning its probably going to take longer and more steps to achive similar simple results.
The file does not seem to be the best way.
Hope that helps a bit.

What are the different options for creating a basic image slideshow in Dreamweaver 5?

Hi, I have created slideshows in Bridge, and they all work fine. They aren't exactly what I had in mind, but this was the only solution I could find that I could understand. My knowledge of web design is minimal at the most. I have attached the slideshows to my html website using IFrames, but it doesn't load properly in Safari.
I included the code at the bottom of this post.
The code dealing with the slideshow and IFrame in question are towards the bottom of the document, I marked them in bold. All the styles with regards to the <div> locations and such are on a separate stylesheet, I'm not sure if you would need that to help out.
I'm wondering if someone could clue me in as to what I can do with this code to make this slideshow work properly in safari. I checked in Chrome and it loads properly. Unsure about other browsers, I do not have access currently.
I am also wondering if there is another way I can create a slideshow using CSS5. This slide show is fine, but I was also looking to include text--image names and descriptions--without having to edit each image in Photoshop to include the text.
Thank you for your time, any help would be appreciated.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta name="creator/artist" content="Ryan Olsen" /><meta name="keywords" content="Ryan Olsen, artist, paint, draw, dark fantasy, landscape, seascape, Paire, Connecicut, New York" /><meta name="description" content="The collection of art by Ryan Olsen" />
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Ryan Olsen's Studio</title>
<script type="text/javascript">
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
   if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
<link href="ryanolsenstudios.css" rel="stylesheet" type="text/css" />
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
</head>
<body onload="MM_preloadImages('images/gallerytabroll.jpg','images/transformativeroll.jpg','ima ges/landscapesroll.jpg','../ryanolsenstudios/illustrationstab.jpg','images/illustrationrol l.jpg','images/bioroll.jpg','images/petportraitroll.jpg','images/sparklessroll.jpg')">
<div id="pagetop">
<div id="header">
<img src="images/name.jpg" width="1057" height="87" alt="name" />
</div>
<div id="banner">
<img src="images/banner.jpg" width="1158" height="155" alt="banner" /> </</div>
</div>
<div id="navigationalmenu">
<div id="gallerytab">
<ul id="MenuBar2" class="MenuBarVertical">
<li><a class="MenuBarItemSubmenu" href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('gallery tab','','images/gallerytabroll.jpg',1)"><img src="images/gallerytab.jpg" alt="gallery" name="gallery tab" width="252" height="72" border="0" class="MenuBarItemSubmenu" id="gallery tab" /></a>
    <ul>
      <li><a href="transformative.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('transformative','','images/transformativeroll.jpg',1)"><img src="images/transformative.jpg" alt="transformative" name="transformative" width="174" height="53" border="0" id="transformative" /></a>
      <li><a href="landscapes.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('landscapes','','images/landscapesroll.jpg',1)"><img src="images/landscapes.jpg" name="landscapes" width="174" height="53" border="0" id="landscapes" /></a></li>
      <li><a href="illustrations.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('illustrations','','images/illustrationroll.jpg',1)"><img src="images/illustrations.jpg" name="illustrations" width="174" height="53" border="0" id="illustrations" /></a>
</li>
<li>
<a href="petportraits.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('pet portrait','','images/petportraitroll.jpg',1)"><img src="images/petportrait.jpg" alt="pet portraits" name="pet portrait" width="174" height="53" border="0" id="pet portrait" /></a></li>
<li>
<a href="sparkless.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('sparkless','','images/sparklessroll.jpg',1)"><img src="images/sparkless.jpg" alt="sparkless" name="sparkless" width="174" height="53" border="0" id="sparkless" /></a>
</li>
    </ul>
</li>
</ul>
</div>
<div id="showstab">
<a href="shows.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('showstab','','images/showsroll.jpg',0)"><img src="images/shows.jpg" alt="shows" name="showstab" width="252" height="72" border="0" id="showstab2" /></a>
</div>
<div id="hometab">
<a href="home.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('hometab','','images/hometabroll.jpg',0)"><img src="images/hometab.jpg" alt="home" name="hometab" width="252" height="72" border="0" id="hometab2" /></a>
</div>
<div id="biotab">
<a href="bio.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('bio','','images/bioroll.jpg',1)"><img src="images/bio.jpg" alt="bio" name="bio" width="252" height="72" border="0" id="bio" /></a>
</div>
</div>
<div id="warpage">
<a href="https://www.facebook.com/WARSPIT" target="_TOP" style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" title="Welcome to WAR">Welcome to WAR</a><br/><a href="https://www.facebook.com/WARSPIT" target="_TOP" title="Welcome to WAR"><img src="https://badge.facebook.com/badge/515768845136977.2357.1022321304.png" style="border: 0px;" /></a><br/><a href="https://www.facebook.com/advertising" target="_TOP" style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" title="Make your own badge!">Promote Your Page Too</a>
</div>
<div id="ryanpage">
<a href="https://www.facebook.com/ryanolsenstudios" title="Ryan Olsen Studios" style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" target="_TOP">Ryan Olsen Studios</a><br /><a href="https://www.facebook.com/ryanolsenstudios" title="Ryan Olsen Studios" target="_TOP"><img class="img" src="https://badge.facebook.com/badge/572127626212351.1710.552992230.png" style="border: 0px;" alt="" /></a><br /><a href="https://www.facebook.com/advertising" title="Make your own badge!" style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" target="_TOP">Promote Your Page Too</a>
</div>
<div id="ryaninstagram">
<a href="http://instagram.com/ryanolsenstudios" target="_new"><img src="images/instagram-glyph.jpg" width="112" height="144" alt="instagram" /></a>
</div>
<div id="gallery">
<iframe src="Transformative/index.html" width="1003" height="834" frameborder="0" name="gallery">
</iframe>
</div>
</div>
<script type="text/javascript">
var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", {imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>

Have a look here Jquery slideshow tutorial for beginners | WEBTUTS

What are the best options for creating a PDF with bookmarks and a hyperlinked TOC?

What I'm interested in is whether or not there is an alternate process I could follow that would side step Word 2011's inability to export to PDF with bookmarks and hyperlinked TOCs. How do you create PDF documents with bookmarks and hyperlinked TOCs in your documents?
Some background:
In Word 2010 and 2013 for Windows (and I'm sure this applies to older versions as well), you can export documents to a PDF file format where the exported file will carry over the bookmarks and hyperlinked table of contents. Specifically, by making specific text headers, will appear in the final PDF file as bookmarks on the side (see image taken from Adobe's website).
Regarding the table of contents, using Word's built in Table of Contents feature successfully ports the ability to navigate to a specific section by clicking on its chapter in the table of contents to the finished PDF file.
I've read several forum discussions that say it's not possible to do this from Word 2011, so my current solution is to just finish all documents on a Windows machine (either with parallels or a separate computer). The alternate process flow of creating a word document, exporting it to PDF, then rehyperlinking everything in Acrobat is just too time consuming to consider.

Hi, beejasaurus
I found a possible kluge from this discussion here
https://forums.adobe.com/thread/1008480
Create the hyperlinks in Word, save the file
Open that file with Pages, export as PDF.
The links work from that PDF.
Note, I did not try this with TOC but it worked with hyperlinks embedded in the Word document

What are the methods used for creating customer

Similar Messages

Maybe you are looking for