What are the possibilities sending notifications using TTY

What are the possibilities sending notifications using TTY? And how to integrate TTY with Siebel

Here are the possibilities of Content search webparts
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/configure-a-content-search-web-part-in-sharepoint-HA104119042.aspx
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/when-to-use-the-content-query-web-part-or-the-content-search-web-part-in-sharepoint-HA104206662.aspx
Compare the strengths and limitations of the Web Parts
It’s important that you understand the strengths and limitations of the two Web Parts because if you choose the wrong one, your site could run into performance problems. You can use both Web Parts to show content that is based on a query. In a simplified
world, here’s how you can decide between the two:
Use the CQWP when you have a limited amount of content, your query is simple, and you don’t expect your content to grow much in the future.
Use the CSWP in all other scenarios when you want to show content that is based on a query.
The table below gives a comparison of the two Web Parts:
Web Part behavior
Content Query Web Part
Content Search Web Part
Query configuration
Easy
You’ll need to know about certain search features such as
managed properties.
Query across large amounts of content
Limited
Yes
Handle complex queries
Limited
Yes
Scale to handle future content growth
Limited
Yes
Display content from other site collections
No
Yes (see
section below)
Design of query results can be customized
Yes, by using XSLT.
Yes, by using HTML.
Maintenance cost in a complex site architecture
High
Small (see
section below)
Narrow down the query results that are displayed in the Web Part
No
Yes, in combination with the
Refinement Web Part.
It was not there previously but then it was added to Office 365
http://blogs.office.com/2013/10/29/search-innovations-for-site-and-portal-design-in-sharepoint-online/
If this helped you resolve your issue, please mark it Answered

Similar Messages

  • What are the possibilities and limitation of using Out of the box content search webpart on SharePoint Online 2013/O365 ?

    Hi All,
    We are migrating from on-premise SharPoint 2010 to SharePoint online 2013.
    I have few questions below: 
    What are the possibilities and limitations of using Out of the box content search webpart?
    Also, how the cross site publishing will work in SharePoint online something with managed navigations and product catalog apporach? if it is not supported, then what are the alternatives to acheive the same?
    Appriciate any commnets/clarifications.Thanks in advance.
    Thanks,
    Dhananjay.

    Here are the possibilities of Content search webparts
    http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/configure-a-content-search-web-part-in-sharepoint-HA104119042.aspx
    http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/when-to-use-the-content-query-web-part-or-the-content-search-web-part-in-sharepoint-HA104206662.aspx
    Compare the strengths and limitations of the Web Parts
    It’s important that you understand the strengths and limitations of the two Web Parts because if you choose the wrong one, your site could run into performance problems. You can use both Web Parts to show content that is based on a query. In a simplified
    world, here’s how you can decide between the two:
    Use the CQWP when you have a limited amount of content, your query is simple, and you don’t expect your content to grow much in the future.
    Use the CSWP in all other scenarios when you want to show content that is based on a query.
    The table below gives a comparison of the two Web Parts:
    Web Part behavior
    Content Query Web Part
    Content Search Web Part
    Query configuration
    Easy
    You’ll need to know about certain search features such as
    managed properties.
    Query across large amounts of content
    Limited
    Yes
    Handle complex queries
    Limited
    Yes
    Scale to handle future content growth
    Limited
    Yes
    Display content from other site collections
    No
    Yes (see
    section below)
    Design of query results can be customized
    Yes, by using XSLT.
    Yes, by using HTML.
    Maintenance cost in a complex site architecture
    High
    Small (see
    section below)
    Narrow down the query results that are displayed in the Web Part
    No
    Yes, in combination with the
    Refinement Web Part.
    It was not there previously but then it was added to Office 365
    http://blogs.office.com/2013/10/29/search-innovations-for-site-and-portal-design-in-sharepoint-online/
    If this helped you resolve your issue, please mark it Answered

  • What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO gnrly

    Hi all,
    What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO generally?
    Help will be surely rewarded.
    Thanks and Regards,
    Creasy

    > What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO generally?
    General threads about LSMW in MM, SD, PP, FICO will be locked and deleted generally.
    > Help will be surely rewarded.
    &********************** Please read "the rules" if found usefull... ************************&
    Cheers,
    Julius

  • What are the major risks buying used lenses ?

    i just bought my first dslr,  and i was wondering what are the major risks buying used lenses ?

    You need to be able to inspect and test the lens.
    Look for obvious signs of physical damage, drops, etc. (cracks, dents, etc.)  A lens normally will get some signs of wear but as it's a used lens, you expect *some* wear... you're really looking for signs of damage.
    Remove both front and rear caps.  Look through the lens into a bright no-contrast background (a white wall, a blue sky, etc.) and check the optics.  You're looking for signs of mold growth or damage to coatings.  Minor dust on internal optics wont impact the lens performance... so while you wouldn't want major amounts of dirt... don't worry too much about minor bits of dust (I've actually helped prove this to someone by clipping a 3M PostIt note down to a tiny 1/4" x 1/4" size and sticking it on the front glass.  Take a photo... nothing shows in the photo (even a piece of "dirt" that big wont show because the camera cannot focus on anything that close to the lens.)  
    Rotate the focus ring from end to end.  You should feel a smooth and consistent amount of friction as you rotate the focus ring.  There should be no rough spots.  Listen to the lens as you do this... there should be no grinding noises.
    Do the same with the zoom ring but in addition to checking for smooth consistent performance (no sticky or rough spots) you're also checking to make sure nothing seems excessively worn (nothing wobbles loose... very heavily used lenses can do that after enough wear.)
    Connect the lens to the camera and make sure the camera can completely operate the auto-focus motors without a problem and/or if it's an image stabilized lens that the IS components are working.
    Set the camera to max aperture (e.g. f/22, f/32.. depending on the lens) and press your camera's "depth of field preview" button (if you don't know which button is your DOF preview, check your manual.  Canon tends to move that one around a bit but it's almost always on the front side of the camera near the lens mount.)  You want to press and release it a few times.  This will cause the lens aperture blades to stop down to the aperture you set.  Release... do this while watching the lens.  You should see the aperture blades move in and out (well... they snap in and out very quickly).  You want to make sure it works ok, the camera gets no error codes, and there's no signs that anything is sticking.
    And then there is the focus test... 
    Focus the camera preferably at a FLAT surface that has lots of detail.... such as the brick wall of a building.  Make sure the camera is level and that the camera's focal plane is parallel to the plane of the wall.  Take a test photo at low f-stop and inspect.  You're checking to verify that the focus works and that the focus is reasonable across the image.   As you inspect from left ot right and top to bottom you are looking to make sure the focus is more or less equal (if the right side of the image is focused... but the left side of the image is soft... it would indicate that lens elements are skewed (lens isn't collimated).  It's difficult for a lens to get into this situation unless it was dropped and you'd probably see signs of damage.  
    Tim Campbell
    5D II, 5D III, 60Da

  • What are the common APIs we use in oracle interface

    What are the common APIs we use in oracle interface,and any APIs are there for validation Of data During Tranfer to interface table.
    How to find Api s in oracle applications in Individual modules

    For 11i, all public APIS are listed at http://irep.oracle.com
    For R12, use the "Integration Repository" responsibility in your R12 instance to list the APIs available in that instance
    HTH
    Srini

  • I want to airplay from macbook pro to apple tv. What are the possibilities? Does it allow me to play movies or videos I access through the browser as well?

    I want to airplay from macbook pro to apple tv. What are the possibilities? Does it allow me to play movies or videos I access through the browser as well?

    Welcome to the Apple Community.
    Only content in your iTunes library can currently be sent via AirPlay from your mac.

  • What are the advantages/disadvantages of using PS/CS5 in 64bit over 32bit please?

    What are the advantages/disadvantages of using PS/CS5 in 64bit over 32bit please?

    From a practical perspective, besides the 64 bit version being a bit faster at just about everything, limitations on document size are lifted in the 64 bit version.  Essentially, how much can do is limited only by how much RAM you have installed in your system.  You can do things like have larger documents, deeper history, etc. and have it all work quickly.
    On the other hand, many 3rd party plug-ins, especially older ones, only provide 32 bit versions, which will only run in 32 bit Photoshop.
    Both 32 and 64 bit versions are installed by default.  It's important to note that most of the preferences are separate between the two, so you can have two slightly different setups that might help with specialty operations you might need.  This gets pretty subtle, but for example I keep the 32 bit version configured with only 1 cache level, so all previews of high bit depth images are always composited in high bit depth.  This aids me with some aspects of astroimage processing.  It's slower, but more accurate.  By contrast I have more cache levels configured for my 64 bit version, so that's faster for general photography work.
    -Noel

  • Firefox has many versions, what are the 10 most widely used versions?

    Firefox has lots of versions, what are the 10 most widely used versions currently?
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)

    http://www.w3schools.com/browsers/browsers_firefox.asp

  • What are the important standard table use in FI/CO module?

    What are the important standard table use in FI/CO module?
    Moderator Message: Please avoid asking such queries.
    Edited by: kishan P on Jan 24, 2012 12:37 PM

    Hi Sanj,
    Please go through the available information and then you can ask if there is any queries.
    [Google|http://www.google.co.in/search?sourceid=chrome&ie=UTF-8&q=importanttablesinficoin+sap]
    Regards,
    Madhu.

  • What are the general effects of using recovery mode, and is it possible for one's data to be backed up on to it afterwards?

    My iPad, in my opinion is a great device to have whenever I need to use it for work - mainly using it for creating music.  However I feel that it's a bit outdated, and I plan to get a new iPad Air for this holiday season and give this one to my children.  That being said, I have stumbled across a weird problem that keeps me from backing my iPad (generation 2) up to my computer.  The error in question states that "The iPad is currently owned by another computer."  By looking around on the internet, I was able to deduce that one of the ways to solve this problem was to put it in recovery mode to get rid of the 'ownership', and this seems logistical.  The problem I'm facing now, is that, after trying to find the answer, I do not know how recovery mode has an impact on all the data stored on my iPad.  To clarify the question into three parts:
    1)  Is there a way to back up files from my iPad and easily retrieve them without the use of iTunes?
    2)  If not, is there a way to get rid of the 'ownership' of another computer other than recovery mode WITHOUT jailbreaking it?
    3)  If still no, then what are the effects of putting my iPad into recovery mode, and will all of my songs and data be safe?
    Thank you for answering, if possible.

    Was the iPad originally set up on a different computer, and hasn't been synced to the one that you are now trying to use ? There are some instructions on this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141
    (Before trying that you could copy any important files/documents off the iPad so that you have you own backup copy of them e.g. depending upon what the apps support then email them to yourself, use Dropbox, copy them to your computer via your wifi-network.)
    You should be able to copy iTunes purchases off the iPad and over to that computer's iTunes via File > Devices  Transfer Purchases, but if you have music from other sources (e.g. copied from CDs) which aren't in that computer's iTunes (and you haven't got a backup to copy them onto it from) then there are some programs listed half-way down this page which should be able to copy them back : https://discussions.apple.com/docs/DOC-3991
    For recovery mode, that will result in your iPad being put back to factory defaults i.e. all of your content will be removed from it

  • What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

    I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

    I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
    The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
    Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
    Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
    Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
    When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
    Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

  • What are the best practices to use GLOBAL Variables

    Hi,
    Please guide how Global Variables can be declared and how they can be initialized.
    Further please guide what are the impacts of Global Variables(if any) on the memory of CLIENT or SERVER, if they are not initialized or freed up after usage.
    Thanks.
    Regards.

    spilgrim wrote:
    My preference is not to use them and to use parameters or package variables. There is not real control on globals so you can end up with an applicatios that has lots of them that are only used once but persist for the user session.I second that. I don't know how often I searched for bugs caused by typos in the names of global variables. Plus the fact that they are only of datatype VARCHAR2. If you are using share_library_data you could also use Package globals in a forms library to share data between called and calling forms. Or you could use a database package...
    cheers

  • What are the 'gotcha' for exporting using Data Pump(10205) from HPUX to Win

    Hello,
    I have to export a schema using data pump from 10205 on HPUX 64bit to Windows 64bit same 10205 version database. What are the 'gotcha' can I expect from doing this? I mean export data pump is cross platform so this sounds straight forward. But are there issues I might face from export data pump on HPUX platform and then import data dump on to Windows 2008 platform same database version 10205? Thank you in advance.

    On the HPUX database, run this statement and look for the value for NLS_CHARACTERSET
    SQL> select * from NLS_DATABASE_PARAMETERS;http://docs.oracle.com/cd/B19306_01/server.102/b14237/statviews_4218.htm#sthref2018
    When creating the database on Windows, you have two options - manually create the database or use DBCA. If you plan to create the database manually, specify the database characterset in the CREATE DATABASE statement - http://docs.oracle.com/cd/B19306_01/server.102/b14200/statements_5004.htm#SQLRF01204
    If using DBCA, see http://docs.oracle.com/cd/B19306_01/server.102/b14196/install.htm#ADMQS0021 (especially http://docs.oracle.com/cd/B19306_01/server.102/b14196/install.htm#BABJBDIF)
    HTH
    Srini

  • What are the possibilities in OWB?

    I am using OWB 10g R1.
    I am taking the flat files and passed them in to External Tables.
    Suppose if my flat file comes with Extra cloumns,then how to proceed with that one from flat files to Fact population?
    And if a new source file comes,based on the file busininess rules changes.In that case what would be the effect on mappings from Flat file to Fact population ?
    Any one can give suggestions...
    Regards,
    SVS

    Thanks
    If Extra fileds added,then we include nulls.but if the same field is used for comparison with already existing field.In that case what I have to do?
    If one more file comes and we have to include some logic on the file.In that case what are the necessary steps I have to take?
    Wating for your valueble replies..
    Thank you,
    SVS

  • What are the best devices to use in my car to listen to music on my 3rd gen iPod Nano?

    What are the best devices on the market today to use in my car to listen to music on my 3rd Gen iPod nano?  I currently use the Monster device that plugs into the electrical adapter (former cigarrette lighter!) in the car.  It's a pain in the neck to manually search for unused FM stations on a long trip. I want something that automatically searches for unsused FM stations or, better yet, that will allow me to somehow connect the iPod into the CD player or directly to the radio itself.  I have a 2004 Toyota Highlander.
    Any suggestions for quality after-market products from the Forum?

    If you have files with the .m4v or .m4a extension its better to change them to .mp4. The M4 extensions will sometimes download in the browser instead of playing.
    A usefull free app for file conversion is Miro...
    http://www.iwebformusicians.com/Website-Movie-Video/Easy-Movie-Player.html
    It can quickly convert to all the formats you need to load for html5 playback: MP4, OGG, WebM
    If you include these three, fallback to flash will only be required for Internet Explorer V 8 and older. V 9 is supposed to support html5 but I haven't actually seen any proof of this.
    Players like flowplayer and JWLongtail are convenient because the control bar icon be customized. This lets you get away from the nasty looking QT control bar.
    http://www.iwebformusicians.com/Website-Movie-Video/JW-Media-Player.html
    http://www.iwebformusicians.com/Website-Movie-Video/Flow-Player.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Maybe you are looking for

  • Calculation of Demurrage in TSW Need heeeellllpppp

    I want to calculate Demurrage value upon actualization of discharge line in nomination in an FOB OP/DX scenario.System calculates the: a) Potentuial Latime b) Allowable Laytime but NOT the demurrage value Following are the config settings I have done

  • Movie Clip playing very fast

    Hi guys,      I have a problem with my loaded movie clip, its playing very fast than its suppose to, (using loadMovie) I've tried to adjust the frame rate of the main file and the movie file, but still the problem occurs.... any suggestion on fixing

  • File info on ipod

    Hiya Has anybody found / written an app for the iphone that allows the file info / xmp / iptc data to be read and edited? If not does anybody have any pointers on how this can be achieved? Thanks for your help. Chris

  • [SOLVED]Setting x11 keyboard map PERMANENTLY for all.

    Read carefully through https://wiki.archlinux.org/index.php/Ke - on_in_Xorg. Ran 'localectl set-x11-keymap gb' as instructed.  Confirmed this creates: /etc/X11/xorg.conf.d/00-keyboard.conf Ran 'grep "config directory" /var/log/Xorg.0.log'  which conf

  • Can l upgrade from Mac OSX 10.4.11 to what?? and how

    AND HOW