What are the procedures for getting Apple to remotely wipe all my data off my ipad that was stolen? I have no hope of recovering it. Please advise asap...thanks!
What are the procedures for getting Apple to wipe the data off my original ipad I bought two years ago. I had it stolen from a hotel room over the weekend and it is not password protected and no I did not download app to find it.
Any hwlp would be greting appreciated!
Apple can't do it, only you could potentially do it if you had enabled Find My iPad on it before it was stolen.
If it was stolen then you should report it to the police. As a safety precaution you should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.
Similar Messages
-
My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
What are the prerequisite for getting MTTR / MTBR data.
Dear SAP Experts,
I want to know what are the prerequisite for getting MTTR / MTBR data.
Regards
ERP TechPre-requisites are:
Maintain Start date in Equipment / Functional location master
Maintain the Malfunction Start date & time, Malfunction End Date & time in Notification
Maintain the Breakdown tick mark in notification
Maintain update group (stats) in Notification type configuration (IMG - Plant Maintenance & Customer Service - Maintenance & Service Processing - Maintenance & Service Notifications - Notification types - Define Notification types) -
I am now using v3.6.8 and tried updating to v7.01 but it does not seem to work. Went to control panel to remove all the old versions but Firefox was not listed there although Thunderbird is there. Please advise asap, thanks
I recommend backing up your Firefox settings in case something goes wrong during the uninstall/reinstall process. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
In the Control Panel, Add/Remove programs, look for '''Mozilla Firefox'''. Make sure to save (do not delete) your personal settings when uninstalling.
If it isn't there, just try installing 3.6.23, which is the latest in the 3.6 family. You can download 3.6.23 here: http://www.mozilla.com/firefox/all-older
With respect to version 7.0.1, are you saying that the installation failed, or it seemed to work but it's nowhere to be found? -
What is the procedure for getting my IP Profile in...
I have recently moved to BT from Talk Talk. I believe that Talk Talk were LLU in my exchange, and the service was via BT Wholesale.
While I was with Talk Talk, I took some steps to maximise broadband speed:
Removed all unnecessary internal extension wiring
Fitted an ADSL faceplate to the master socket
Switched to a Vigor 120 ADSL modem, plugged straight into the master socket
The above increased my connection speed from below 2Mbps to about 3.75. After about a week the connection stabilised at just over 5Mbps.
Since joining BT, my speed has settled to about 4Mbps. Running the speedtest beta 3 times gave results of 4.13, 4.15, 4.15
My IP profile is set to 4.15
The connection is extremely stable.
It seems probable to me that my profile is limitting the connection speed. How do I request an increase?
BTW, thanks to all the users who keep this site going - much appreciated!
Solved!
Go to Solution.Online Status
System Status
System Uptime: 136:28:36
LAN Status
Primary DNS:
194.109.6.66
Secondary DNS:
168.95.1.1
IP Address
TX Packets
RX Packets
192.168.2.1
7606527
6190035
ADSL Information ( ADSL Firmware Version: 321311_A)
ATM Statistics
TX Cells
RX Cells
TX CRC errs
RX CRC errs
51777854
158499926
29
2468
ADSL Status
Mode
State
Up Speed
Down Speed
SNR Margin
Loop Att.
G.DMT
SHOWTIME
448000
5216000
8
47
WAN 3 Status
Enable
Line
Name
Mode
Up Time
Application
Yes
ADSL
00:00:00
Management
IP
GW IP
TX Packets
TX Rate(Bps)
RX Packets
RX Rate(Bps)
0
0
0
0
WAN 4 Status
Enable
Line
Name
Mode
Up Time
Application
Yes
ADSL
00:00:00
Management
IP
GW IP
TX Packets
TX Rate(Bps)
RX Packets
RX Rate(Bps)
0
0
0
0 -
What are the steps for merging of database files ?
hi
i have 23 datafiles in a tablespace .i want to merge these 23 datafiles into 4 to 5 datafiles.What are the steps for merging of database files
Edited by: mithun on Oct 22, 2011 11:29 PM>
i have 23 datafiles in a tablespace .i want to merge these 23 datafiles into no of
small no of datafiles.What are the steps for merging of database filesYou didn't mention your Oracle version.
See here for creating tablespaces http://www.adp-gmbh.ch/ora/sql/create_tablespace.html.
You can specify as many (or as few) datafiles as you like.
Then create tables in your new tablespace x_old_table_name(s) - you can Google this.
Then select the data from old_table_name(s) into x_old_table_name(s).
Drop old_table_name(s)
Rename x_old_table_name(s) old_table_name(s).
There may be a better way.
Paul... -
hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you
Legality aside (I'm not a lawyer and have no opinion on the matter) in order to make a purchase of an iPhone 5 you would need to travel to a country where they are for sale and purchase it there. Be sure to get one that is officially unlocked or you would not be able to use it with your cell carrier. Be sure that your carrier supports use of the iPhone before you buy. Also note that the warranty of the iPhone is only valid in the country of purchase.
Appe does not ship outside of the countries where it sells the phones. -
What is the procedure for verifying that my photos, after syncing up my iPad and my iMac, actually are in iTunes?
iTunes manages your photos between the iPad and iPhoto on the iMac. If you have things set up correctly, then the photos will go to iPhoto for safe keeping and later use.
-
What is the procedure for a hard boot of my iPod touch 4th generation
without iTunes, and without computer, and without iPod data screen?
6 months after purchase I updated my iPod touch as recommend by iTunes.
It has not worked since that day. It frozen (disabled) with a "connect to
iTunes" icon displayed...that is the only thing it does. itunes does not
recognize the iPod. My Windows7 computer recognizes an Apple device.
Other computers recognize the devise but if iTunes resided on that
computer it did not recognize the iPod
I suffered a setback with deep depression and am just now getting out of it enough to do something. The depression prohibited me from taking action.
I have done every procedure recommended from Apple help and external
sources. I did this thoroughly with help for other owners and IT experts,
Apple employees etc etc. I and associates have perform reboots utilizing a
number procedure using only button on the iPod. These were unsuccessful
also have performed.
Please do not ask me to do the usual.
Online I saw a process using the buttons on the iPod to completely
reformat
the iPod. It was NOT the hold buttons for 10 sec let go of one wait 8 sec
etc. I can not find the process now...a friend showed it to me in passing
I have lost contact with him. This is the procedure, I believe, that with
enable me to update and use the iPod.You need an internet connection and likely a computer with iTunes but an iPhone, iPad or iPod touch with the FindMy iPhone App may work by:
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Otherwise
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Yo may have to go to an Apple store or a friend's house with an internet connection and iTunes. -
My MacBookAir is one year. I want to upgrade IMovie, IPhoto, Garageband and ITues, But What are the prices for these upgrades. How do I get around?
Actually, if you are updating the free iLife apps (iPhoto, iMovie & GarageBand) that came with your new Mac, the updates are free. Only if you are upgrading to newer major paid versions would you be charged.
iTunes is always free, but is located in Apple Downloads, not the Mac App Store;
http://support.apple.com/downloads/ -
PLEASE HELP
my iphone 4 is out of warranty and its screen has cracked but its completely working WHAT IS THE PROCEDURE TO GET IT FIX ?$99 is the carrier's fully subsidized or discounted price which requires signing a new two year contract with the carrier. Apple's out of warranty or not covered under the warranty "repair" price which pays for an exchange at a significantly reduced price off the full retail sales price has no effect on the existing contract nor requires signing a new contract with the carrier.
-
What are the points for?
I am just wondering what are the points for that you get in this Support community thing for?
First, not money or Apple products.
What you get is a "reputation for being helpful" because points are awarded by the OP (original poster) of the thread. OPs can be fickle ... awarding point to the least helpful answer. But time will win out if you truly help.
DO not, please , open more accounts in the ASC and award points to yourself. Moderators will kick you out (all of your accounts) for that.
Reaching level 2 lets you "report" people. I usually only report people who want help explcitly from moderators as you cannot report yourself. I also report people who truly are violating policies badly such as the obnoxious "anonymous usless poster" who posts the same thread in all of the sub-forums.
Basically though, reputation. -
What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?
I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube
Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR -
What are the settings for datasource and infopackage for flat file loading
hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumarLoading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets. -
What are the settings for Transport?
What are the settings for Transport?
u will get three panel in transport connection in BW side
here u need to collect object and drop them to 2nd panel
then u need to select whether u want o select all objects or only necessary objects
select as per ur requirement hten u need to write thse object in a NEw request
now executte nad go to Se10 and relaease sub task and main task
now ask basis team to impot it in QAS test it and again trnasport these to Production environemnt.
assign points if helps
Maybe you are looking for
-
DDNTK and ARREARS PROCESSING???
In Indonesian payroll during processing of PRPRI function the net amount (/550)is taken and other deductions which are marked for arrears processing are compared for sufficient deductions and if enough net amount(/550) doesn't exist then based on arr
-
JSP editor ignores position attributes in style tag
I have recently installed M7 NitroX for JSP and Struts evaluation build 366. When using the JSP editor to view the design of a jsp page that uses layers e.g. <div style="position:absolute; left: 100px; top: 100px;">sometext</div> The design view comp
-
Toocan---I have a question for you
Can you please tell me in simple terms what I need to do to add songs from ITUNES to IPOD without losing all the songs on my IPOD. My Itunes library I am slowly building back up, but dont wish to lose my 17,000 songs on my POD. thanks in advance for
-
Why java does not support multiple inheritance ???
Hai friends ..iam new to java .. i have doubt ..plz help me Why java does not support multiple inheritance ???
-
Handling states within selfmade components
Hey folks, I have got a tiny problem. I have made a program that contains saveral states, two of them are "Login" and "Board". In the Login state I refer to the "compLogin" Component. There, the user has to login and afterwords the program has to swi