What are the ramifications of removing items from Usage Settings?

When attempting to download and install the latest upgrade to my iPad, I received a message that I needed at least 3.8 GB to install the upgrade. Then it recommended removing items in the Usage Settings.
I'm primarily concerned the process could disrupt my large music library.
If I backup my iPad, remove the music from the iPad Usage Settings, and install the upgrade, can I then restore the music?

" ... restore the music" -- to your iPad?
The upgrade requires more space than the older software you have. You should plan to keep less data on your iPad than you had before the upgrade.

Similar Messages

What are the ramifications of removing owa.num_cgi_vars :=0; ??

Hello All,
Hoping someone can help me with this...
changed my character set from WE8ISO8859P1 to AL32UTF8.
After this many pl/sql procedures would fail with:
ERROR Message:
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "SYS.HTP", line 1526
ORA-06512: at "SYS.HTP", line 1735
ORA-06512: at "SYS.HTP", line 594
ORA-06512: at line 5
The fix from Oracle was:
SQL> set serveroutput on
begin
owa.num_cgi_vars := 0;
HTP.HTBUF_LEN := 84;
htp.init;
htp.htmlopen;
htp.p(rpad('.',128,'.'));
htp.htmlclose;
owa_util.showpage;
end;
This works fine for most of our applications, however some only work ok when I take out the owa.num_cgi_vars := 0;
above.
I'd like to remove it altogether as it works for both sets of applications when I take that line out.
What are the ramifications of removing owa.num_cgi_vars := 0; ??
What is it doing?
Thanks so much in advance!
Dan

user13794949 wrote:
After this many pl/sql procedures would fail with:
ERROR Message:
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "SYS.HTP", line 1526
ORA-06512: at "SYS.HTP", line 1735
ORA-06512: at "SYS.HTP", line 594
ORA-06512: at line 5 Obviously. As you are not preparing a valid web gateway call interface for the web-enabled procedure to execute it. Kind of like buying a fish at the local pet store and putting it into an empty bowel and then acting all surprised that it died.
The fix from Oracle was:Not a fix. A work-around. Allowing a web-enabled PL/SQL procedure to be called without using a web gateway interface. And this is only done for very basic testing. And very, very seldom...
This works fine for most of our applications, however some only work ok when I take out the owa.num_cgi_vars := 0;
above.
I'd like to remove it altogether as it works for both sets of applications when I take that line out.
What are the ramifications of removing owa.num_cgi_vars := 0; ??
What is it doing?The question is WTF ARE YOU DOING!?
It seems you are clueless as to what a web-enabled procedure is. How these need to be called and used. And not calling these from a proper environment. And what, do you copy the entire HTML buffer (in expensive PGA server memory) to the DBMS_OUTPUT buffer (in expensive PGA server memory) in order for the client to access the HTML output?
As for that static variable. It sets the number of CGI (Common Gateway Interface) parameters that are the in the CGI name-value arrays.

HT201364 You need 4.93 GB of available space. I cannot download OS X Mavericks. I obtain the following answer: Remove items from your startup disk to increase available space. How do I know what items I should remove in order to make more space available?

You need 4.93 GB of available space. I cannot download OS X Mavericks for I obtain the following answer: Remove items from your startup disk to increase available space. How do I know what items I should remove in order to make more space available? Thanks.

You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your Mac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
Other things you can do to gain space.
Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
This app will help you locate files that you can move/archive and/or delete from your system.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

What are the repercussions with removing my husbands icloud account info from my iPad?

What are the repercussions with removing my husbands icloud account info from my iPad?

Hahaha. Yes everything's ok on that front. I'm just not great at sharing my toys, so I wanted everything on my iPad to be in my name (not selfish at all, is it?). Anyway, was just concerned that if I removed that info, I might lose a whole bunch of stuff on there. I've since learned that I can keep his icloud account and " disable" the fields that I don't want to share (contacts, email) and keep the ones that I do (photos). Excuse my ignorance, I'm still a rookie on the iPad front.
So, that being said, I suppose I can tolerate his info being in my icloud. ;)
Thanks for your help Barry!

What are the ramification of changing the default installation path?

Some of the users in my agency would like to standardize the installation path so it doesn't change when we upgrade from one version to another. There are other applications that use Adobe Reader and Adobe Acrobat Pro, and a standard path would be helpful. What are the ramification for security and quarterly updates?
We are on Win 7 Pro SP1, mostly 32-bit.
E Powell
Austin TX

I tend to agree, and strongly recommended against it. Especially since Adobe products can be finicky. And the path that they have to update is not dynamic, unfortunately.
Thanks.

What are the ways to download data from ods?

Hi all,
what are the ways to download data from ods?
1. se11/se12
2. listcube
3. infospokes.
Apart from the above 3 is there any other way to download data from my ods.
I need to download around 90 fields from my ods to a flat file. But listcube doesnt allow me to select all the fields. So i used se11 to download the data from my ods. bUt still se12 doesnt allow me to download all the 90 fields it downloads only 40 fields.
Can anyone suggest me how to select all the 90 fields and download it to an excel sheet.
thanxs
haritha

Hi Haritha,
Go to Tcode SE16, give your ODS active Table name and give width of output list as 1023.
Now run transaction to see your data and then click Settings --> User parameters and Select ALV Grid Display.
Now you should see and Excel Icon on top, click on it then select Table , then
Microsoft Excel and it will open your data with all columns you want.
I just tried for 213 columns
Hope this helps.
Thanks
CK

What are the idoc to send data from sap hr to sap fi

what are the idoc to send data from sap hr to sap fi

Message type of IDoc depends on the data you wish to send.
please detail on the data that you need to send in the IDocs.
regards,
Nitin

What are the methods called while navigating from one applet to another one

Hi All,
Could any one brief me about "When you navigate from one applet to another what are the methods called ?".
Thanks in advance.
Best Regards,
N.Madhusudhanan.

http://forum.java.sun.com/thread.jsp?forum=421&thread=426771&tstart=0&trange=100

What are the book names for MDM from SAP Education academy

Hi SAP gurus,
Can any one tell the name of the books for MDM from SAP Education academy.
For example in SAP MM (material management) - it is TAMM40(part1,part2,part3,paret4...etc)
So what are the names of the books for MDM from SAP Education academy. Just name and other deails enough.
Thanks in advance.
Vam C

Hi Vamsay,
I am sending you some books names of SAP MDM.
1. SAP MDM Frequently Asked Questions (English)
(Master Data Management Certification Sap Mdm Faq - ISBN: 9781603320153)
Price range: $42.00 - $54.95 from 4 Sellers
Publisher: Equity Pr
Format: Paperback
2. Build Foundations for Continual Improvements with SAP MDM
Enterprise Data Management with SAP NetWeaver MDM
Andrew LeBlanc
3. English Edition
Auszug aus:
SAP NetWeaver Master Data Management
ISBN 978-1-59229-131-1
lieferbar EUR 69,95 CHF 115,00
[In den Warenkorb] [Auf den Merkzettel]
Please rewrds if found helpful.
Regards,
Alok

What are the reports we can get from OPM Quality

Dear All,
What are the reports we can get it from OPM Quality module.
I am unable to get any reports abouts Tests, Samples specifications.
Can someone please suggest me.
Regards,
Jon

Pl post details of EBS version.
If 12.1.3, see Chapter 7 of the OPM Quality User Guide - http://download.oracle.com/docs/cd/B53825_08/current/acrobat/121gmdqmug.pdf
The same guide for other versions can be found at http://www.oracle.com/technetwork/documentation/applications-167706.html
HTH
Srini

What are some ways to remove shine from the face in portraits?

What are some different methods that people use to remove shine from the face while still leaving enough for a subtle highlight? I would love to hear all the different options I have. Thanks!

Here is one:
Open a blank layer above the background layer
Access the Clone Stamp Tool.
On the tool's option bar, enter Mode: Darken Opacity: 30% Aligned: Checked Sample all layers: checked
Zoom in on the shiny area, then ALT+left click a non-shiny skin area to sample the skin. Now, paint over the shiny area

What are the recommended steps to upgrade from CF7 to CF8

I have read all of the documentation for how to upgrade from
CF 7.02 to CF 8. Well there is actually only one blurb in all of
the CF docs.
"Upgrade installation You can upgrade from ColdFusion MX,
ColdFusion MX 6.1, and ColdFusion MX 7. When upgrading from
ColdFusion MX, ColdFusion MX 6.1, or ColdFusion MX 7, the installer
preserves the existing settings and installs in a new directory,
automatically assigning ports that do not conflict with the
existing installation."
OK that sounds simple enough, so i went ahead and installed
it. Well it did not work, now I am stuck somewhere between 7 and 8.
My basic step, as I can best recall at 1:00AM.
* Select Multi server Configuration
* Select install path, I used D:\JRun4
* This is where my existing cf7 install was located
* installer told me port 8300 was being used so it gave me
port 8306 instead
* Selected d: for ColdFusion8DotNetService install path
* Select Passwords for admin and rds
* installed cf
* received error after install
(Adobe_ColdFusion_8_InstallLog.log)
ANT Script Error:
Status: ERROR
Additional Notes: ERROR - jrun.xmlUnable to remove existing
file D:\JRun4\bin\jrun.exe
* rebooted
* can't login to cfadmin at port 8306
* tried to login to cfadmin at port 8300, everythin works
* it appears the cf7 services are still running,
* didn't notice any new cf8 services, excpet the dotnet
stuff
Any assistance would be appriciated.
I am on windows 2003/CF8EE/Multiserver configuration

A_B wrote:
> I have not seen anything come out from Adobe on this
subject but I did talk to
> two of the CF engineers at the Max Conference regarding
this issue. I spoke
> with Dean Harmon and Tom Jordahl about this issue. Here
are the basic take
> aways from what I recall. I have not yet attempted this
but will be sometime
> in the next month or two. There are a few options but
basically JRUN is an
> updated version with CF8 and there is a new JRE that it
runs on
Essentially CF comes with the updates that will become JRun 4
Updater 7
integrated into it. (The beta of Updater 7 is under way).
> - Backup existing JRUN directory (c:\JRun4 or whatever)
completely.
> - Make a backup of all the existing CF settings via a
CAR file in the CF admin.
> - Do an uninstall of your CF7 installation. This goes
against my better
> judgement since you should not need to uninstall 7
before installing 8 since
> there should be an upgrade path. I understand that there
are differences with
> JRUN etc ... but this should be done via an install.
> - Install CF8 and then restore your settings via the CAR
file. If you are
> crafty enough I believe you can also bring back all the
XML files and set a
> flag to let the CF admin to an upgrade.
Use the CAR file, XML file formats have changed between
versions.
> I want to also note that this is for the multi-server
install on top of JRUN
> in which you already have JRUN installed with CF7. I'm
surprised that Adobe
> has not released better instructions on how to do this
but they haven't and
> they seem to have let us to try to figure this out which
is completely wrong of
> them. How hard is it to write up a tech article.
What you are describing is a simultaneous update of JRun and
CF. For
just an update of CF you need to redeploy the CF EAR file as
described
in the JRun manual. For just an update of JRun you have to
wait until
updater 7 is released (or join the beta and file bugs if you
don't like
the procedure).
> Another possible option would be to update JRUN with the
latest release,
The latest release is only updater 6.
> download the latest JRE and create a custom jvm.config
file to use for the new
> JRE. Then you would create a new instance of JRUN using
the JRUN console and
> deploy a CF8 EAR/WAR file to it. You still then have the
issue of getting
> settings and things transferred.
Use a CAR file for that.
> This seems possible to do it this way but does not seem
as clean at all.
In place upgrades are never clean. In my book, an upgrade
means
rebuilding from scratch.
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

What are the essentials needed before upgrading from call manager 9.1.1 to call manager 9.1.2?

I recently tried to upgrade my call manager in a lab environment from 9.1.1 to 9.1.2 but failed. The error stated that connection had been lost after 2 hours into it. Connect using CLI. Any help would be greatly appreciated.
Steve

You mean via GUI??
What does the upgrade status via CLI says??

What are the correct iphone 5 H.264 export settings?

I have scoured the internet for help trying to find the correct way in which to make a proper H.264 mp4 video file that will play on the iPhone 5. I am using Adobe Premiere CS 6. There exist presets for the iphone 4, but not the iphone 5. I tried the iphone 4 presets but they will not play on the iphone 5.
I tried checking Apple's iphone 5 video specs to make sure I am not over spec: https://www.apple.com/iphone/specs.html, which says: Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Here is how I have my video export settings set up in Adobe Media Exporter and the multiplexer is set to iPod:
I've tried other slight variations, but nothing will play. I am hosting these videos on a site and just trying to access them from the URL bar such as: http://harbourak.us/videos/iOS_mp4.mp4. I cannot use m4v or mov formats because of the flash script that is used on other flash supporting browsers that can convert the mp4 quickly on the fly.
If anyone has any suggestions for how to get this to work I would be greatly appreciative! Thank you!

So yeah, there is no setting I can find that allows you to properly export your video in h.264 .mp4 that will play on the iphone from Adobe Premiere CS6. What is the point? I just don't get it. It's like secretly apple has decided to not allow any mp4 to be downloaded from the web and be played on the iphone, but then lie to everyone when they say on their spec page that the iphone will play mp4s that are 640x480, 30fps, AAC 48kHz, < 2.5Mbps. Ugh, I've exported so many different versions of .mp4s and for each and everyone the iphone says "sorry, broken play button image" and no explanation. So helpful! </sarc>
Okay, you want examples that work FINE in regular PC browsers? Well, I set up a dummy page with the HTML5 embed code here:
http://housemajority.org/wp-content/themes/candidate/video-test.php. Works fine in Safari for Mac & PC.
This currently has the 640x480, 30fps, AAC 48kHz, < 2.5Mbps h.264 codec .mp4. Plays fine in Safri on the PC or Mac but not the iphone. This file completely coorelates with Apple's spec sheet so I'm at a total loss. The actual file can be found here: http://housemajority.org/vids/iOS_30fps.mp4
Other video attempts:
/vids/iOS_preset.mp4 - 29.97 fps before changing to 30fps
/vids/iOS_mp4.mp4 - 720x480 before changing to 640x480. makes no sense
/vids/H264_w29.mp4 - another version of the 720x480 version.
/vids/iOS_converted.mp4 - tried using one of those "convert videos to iphone version" shareware apps that also doesn't work.

What are the steps to remove SMS Provider traces from a server

Hi,
My client's environment is set up with a standalone primary site. They decided to install a second SMS Provider on a site system also running the Reprting Services Point to provide redundancy in the case the SMS Provider on the primary site
would go down.
They experienced a problem with the server running the second SMS Provider and it went down for about a day. The behavior for SCCM console users was to get an error message preventing them to connect to SCCM; they had to close the console and re-launch it
so it would randomly connect to the SMS provider on the primary site successfully. When a SMS provider is down, it seems the console won't redirect itself automatcally to another provider when trying to connect.
Since it was causing some frustration because console users had to launch it several times before they could connect, someone removed the second SMS Provider using the Site Maintenance wizard on the primary site. The thing is the wizard ran while the second
SMS Provider was down, it removed traces of this SMS Provider from the site configuration, but couldn't remove the actual SMS Provider files and registry entries since the server was down.
Now, only one SMS Provider is active on the primary site server, but we have orphaned SMS Provider files and registry keys on the site system server. Is there a way to remove them cleanly? The site system is still running the Reporting Services Point, so
we cannot remove everything related to SCCM.
Now we prefer to keep a single SMS Provider on the primary site server, since SCCM is not consider critical to the business anyway, and to avoid this issue in the future.
My guess would be to reinstall the SMS Provider from the Site Maintenance wizard and remove it after, but I just want to have feedback from people who might have deal with it in the past.
Tnx for help
Patrick

Hi,
Could you install the SMS Provider from the Site Maintenance wizard while SMS Provider files and registry entries are still there? Please have a look on the thread below, although it is for sccm 2007.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/bb307748-7638-404d-a6a4-982827a051c8/how-do-i-remove-sql-provider-that-was-previously-installed-on-a-remote-sql-server?forum=configmgrsetup
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

What are the ramifications of removing items from Usage Settings?

Similar Messages

Maybe you are looking for