What are the right content conversion parameter in this receiver ?

Hi experts,
Can someone help me with setting right Content conversion parameter in the Receiver of File adpater(FCC).The output file must be fixed length text file.
Here is the receiver structure:
<Recordset>
    <Header>
       <f1>01</f1>
       <f2> </f2>
       <f3> </f3>
    </Header>
     <Body>
        <SubBody1>
              <field1 />
              <field2 />
              <field3 />
              <field4 />
              <field5 />
        </SubBody1>
         <SubBody2>
              <field6 />
              <field7 />
              <field8 />
              <field9 />
              <field10/>
        </SubBody2>
     </Body>
    <Trailer>
        <f1>03</f1>
        <f2> </f2>
        <f3> </f3>
   </Trailer>
</Recordset>
Also Body can occure multiple times in the file but still will have this structure...Header and Trailer can occure only once in file.
What are the right content conversion perameters in this case?
Appreciate your help asap!T
Thanks
Jon

<Recordset>
    <Header>
       <f1>01</f1>
       <f2> </f2>
       <f3> </f3>
    </Header>
     <Body>
         <SubBody>
              <field1 />
              <field2 />
          </SubBody>
          <SubBody>
              <field1 />
              <field2 />
          </SubBody>
          <SubBody>
              <field1 />
              <field2 />
          </SubBody>
        </Body>
    <Trailer>
        <f1>03</f1>
        <f2> </f2>
        <f3> </f3>
   </Trailer>
</Recordset>
if this is the input structure then FCC goes like this ....
Recordset:Header,Body,SubBody,Trailer
Header.fieldFixedLengths – 10,20,30.. (based on you are structure fixed lengths)
Header.endSeparator - 'nl'
SubBody.fieldFixedLengths – 10,20,20  (based on you are structure fixed lengths)
Body.endSeparator - 'nl'
Trailer.fieldFixedLengths – 10,20,30….(based on you are structure fixed lengths)
Trailer.endSeparator - 'nl'
We might have to try out SubBody.endSeparator - 'nl' if Body.endSeparator - 'nl' does not insert a new line after each body record.
Cheer's

Similar Messages

  • What are the right names for the 2 OHS?

    Hi,
    Currently we have 2 options for an HTTP Web Server for APEX:
    - An Oracle HTTP Server (OHS) from the database companion CD.
    - An Oracle HTTP Server (OHS) from the Oracle Application Server.
    The first OHS is based on Apache 1.3.x and the second on Apache 2.0.x.
    What are the right way to reference them so people know what your are talking about? In the manuals they are just called OHS but since they are not the same I would like to distinguish them some way. What do you call them?
    Regards Pete

    OK now I think got it:
    OHS from the database companion CD and from the Application Server are both based on an Apache 1.3.x HTTP server.
    On the Oracle Application Server companion CD is an OHS based on an Apache 2.0.x HTTP server. This release does not contain the mod_plsql module an can therefor not be used for APEX.
    Regards Pete

  • What are the most challenging conversions in Oracle apps...

    Can any one tell me what are the most challenging conversions in oracle apps.
    Thanks
    Sambit

    d1acf245-8019-40c9-a1df-fdc9374b36b2 wrote:
    Can any one tell me what are the most challenging conversions in oracle apps.
    Thanks
    Sambit
    https://forums.oracle.com/message/10705767
    Thanks,
    Hussein

  • What's the right version of codes for this hybrid 6509?

    I have a 6509 running CatOS on the Sup720 and IOS on the MSFC. I''ll be putting in a 2nd Sup720 as the standby, but not sure what are the right version of codes to load. Here is the hardware info and the Cisco release notes I found:
    Active Sup: SUP720-BASE with PFC3A. Cisco recommends 8.3.3, minimum 8.1.1.
    Standby Sup: SUP720-3B with PFC3B. Cisco recommends 8.4.2, minimum 8.3.7.
    6548-GE-TX: Cisco recommends 7.6.9, minimum 7.6.1.
    6516A-GBIC: Cisco recommends 7.6.9, minimum 7.5.1.
    Thanks for any help.
    Gary

    This is not a supported Redundancy configuration:
    Understanding How Supervisor Engine Redundancy Works
    Note The redundant supervisor engines must be of the same type with the same model feature card. The WS-X6K-SUP1-2GE and the WS-X6K-SUP1A-2GE (both without PFCs) are compatible for redundancy. For supervisor engines with PFCs, the PFCs must be identical for redundancy (two PFCs, two PFC2s, two PFC3As, two PFC3Bs, or two PFC3BXLs).
    http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_4/confg_gd/redund.htm#wp1079325

  • What are the right steps to move iTunes 11 library from external HD to internal HD?

    I have poked around the support communities and tried several times to move the iTunes library (currently on an external HD) to my internal HD. 
    I've tried
    - pointing my library to my new internal HD location
    - checking "keep iTunes library organized"
    - checking "copy files to iTunes media folder while adding"
    - consolidating all files
    - exporting library
    No dice.
    I also tried
    - clicking create "new library"
    - physically copying (drag and drop) my iTunes subfolders to the new iTunes folder...
    - now I've got several duplicates
    Clearly I should not become a Genius at the Genius Bar. Please suggest the best process/steps to get er done! I've kept my original iTunes folder nice and safe. So I can go back to ground zero and do it right.
    Thanks

    What exactly do you have on the external drive?  A library is more than just media files.
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to choose a library, then select the copied iTunes folder.
    If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music  then you don't even need to start with the option key held down, iTunes will automatically look for it there.  (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391
    iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847 - plus supplemental information about organizing to new structure https://discussions.apple.com/message/26404702#26404702
    Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/docs/DOC-7392 - and making an iTunes library portable.

  • What are the different kind of parameter/attributes we can set in  XI ?

    Hi  Experts
        Yesterday i have attended an interview ....one question was
        1) What are the different knid of parameters we can set in XI ? Have done ?
            what and all the cases we will set the parameters/Attributes?
    and one more was
       2) How will you do Stress testing in XI ?
    Awaitng for responses
    Adv thax and regards
    Kiran lvs

    Hi,
    1) What are the different knid of parameters we can set in XI ? Have done ?
    what and all the cases we will set the parameters/Attributes?
    -First you should ask in which stage or where do you want to configure parameters ,i mean  Whatever parameters we can set in XI all comes under this question like all sort of Adapters,each of adapter can have its own set of configuration , configuration parameters,XI admin config parameters.. etc..
    and one more was
    2) How will you do Stress testing in XI ?
    In general stress tesing will be done by testing team
    Stress testing by way of sending more messages and performance also
    see the below links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3a67c790-0201-0010-89aa-d27d97dd1374
    Rules of thumb on size of messagetypes in XI
    /people/sravya.talanki2/blog/2006/02/28/simulating-xi-messages-proto
    Measure Performance
    Regards
    Chilla..

  • What are the commonly used conversion routines apart from alpha conversion?

    hi all,
    Can any one let me know the commonly used conversion routines apart from alpha conversion routines ?
    thanxs ina dvance
    hari

    Hari
    There are lot of conversion routines, like
    BUCAT Conversion Routine. eg. The BUCAT conversion routine converts the internal presentation of the budget type
    (0BUD_CAT) into the external presentation (0BUD_CAT_EX), using the active entries in the
    master data table for the budget type InfoObject (0BUD_CAT).
    see the link below for all the routines.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b9119290-0201-0010-69af-96fe3bf00243
    assign points if helpful
    Kalyan

  • Content Conversion Parameter in File Receiver Adapter

    Hi all,
    I have created one File Receiver Adapter with Message Protocol 'File Content Conversion' and with the following configuration:
    Recordset Structure: Message
    Message.fieldFixedLengths: 1000
    My Message Type is:
    LogErro_MT
      Message (Type: String) (Occurrence: 0..Unbounded) (Details: Min,Max Length: 1000)
    But the file created by it has no data inside it. If I change the Message Protocol to 'File', the content of the file is the XML generated by the Outbound Proxy.
    Would someone can help me?
    Thanks in advance
    Leo

    Hi,
    Please create a data type with
    Records
    Message ---0..unbounded
    and hten MT for the same.
    In the receiver file adapter:
    Recordset Structure: Message
    Message.fieldFixedLengths: 1000
    Please check this weblog for the same:
    /people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp
    IS this what you are trying to do.
    Regards
    Vijaya

  • What are the right DNS records to host more than one site on OSX Server (ML). My conf in Server.app looks right but one of my sites lands on the default server. Any suggestion?

    I started using OSX Server on Mountain Lion a few days ago and it looks promising.
    I do however measure my ignorance in DNS matters...
    I defined two websites in addition to the the Default Server, so I have three names to deal with.
    For argument's sake
    - www.main.com is the default site
    - www.sitea.com is the first site
    - www.siteb.com is the second site
    I define a virtual host for www.sitea.com and another for www.siteb.com
    The resulting apache conf is what I would expect, I am pretty sure it is correct.
    So I modified my DNS entries (they were A records) to point to my new OSX Server.
    My result is:
    - www.main.com shows the default site
    - www.sitea.com shows the first site
    - www.siteb.com shows...the default site
    Any ideas?
    Cheers

    Thanks MrHoffman!
    My problem ended up being a name but not in the DNS!...In Apache.
    Your information allowed me to rule out possibilities and zoom in to the culprit faster.
    I just report here the conclusion hoping it can help someone else.
    When I installed OSX Server last week, I had in mind to principally run siteb.
    During the initial install, this is what I must have entered and then forgot about it.
    Then I defined my virtual hosts sitea and siteb and realised my machine was called siteb and changed its name to main to avaid a name collision. At which time I remember OSX Server telling me that changing the name could have consequences...But it apparently went ok, and it did except for one little thing.
    The consequence was this:
    in the main configuration file /Library/Server/Web/Config/apache2/http_server_app.conf the ServerName directive had remained siteb (instead of main). I manually updated it with TextEdit (could do vi from bash, its the same) and replaced siteb with main.
    There is a way to detect it.
    In Server.app, there is a "logs" panel, which displays all sorts of logs for everything including the websites.
    Each website's logs are presented as "access" and "error" logs. The information was there, but I could not see it because the viewing window in remarkably small for so much information in raw text...
    web logs are actually written to only two files in /var/log/apache2 (error.log and access.log)
    I openned two bash windows and run tail -f on error.log in one and tail -f access.log in the other.
    When I started the web service, apache threw a warning stating from mod_ssl saying that the certificate did not match the serve name...I the certificate was what I expected, I checked http_server_app.conf and found the ServerName directive that was not changed when I renamed my server...
    Easily fixed when its found, but it can take a while to find.
    BTW, I was using A DNS records for and it works, but I find your method of using CNAME records documents the administrator's intent better than with A records; I started to do the same. (A records a useful though, they can run a domain across multiple machines)
    Cheers mate!

  • What are the right Color Settings and Proof Setup in Photoshop if you design for the web?

    This question has come up numerous times, but I still haven't seen a satisfying, final answer. I would like to make sure that what I'm designing in Photoshop in regards to colors, saturation and brightness will be as close as possible as what I'm going to see in my Safari browser once that same page has been developed.
    I understand there are going to be differences between monitors and browsers, but if I just could get an almost one to one translation in regards to color/saturation/brightness from my Photoshop file to that same developed HTML page in Safari that would be ideal.
    Currently I set my Color Settings to Monitor RGB - Display and my Proof Setup to Monitor RGB. Not sure if these settings are correct.
    Curious to hear your thoughts and advice.
    Thanks,
    -Tony

    if AdobeRGB is the more professional working space, then why not use that profile?
    on the web (and in unmanaged and broken work flows) sRGB is the safest profile (source space)
    just open your tagged Adobe RGB and tagged ProPhoto RGB document (use the embedded profile in each document)
    and go to View> Proof Setup: Monitor RGB (notice the loss in saturation? that's how most of the people on the Internet will be viewing your color, assuming you have a standard-gamut monitor like most people)
    always CONVERT to sRGB for the World Wide Web
    i didn't read your link
    anyone who recommends "disable color management in Photoshop" -- set Working RGB to "Monitor RGB" -- AND MOST UNBELIEVABLY -- "Don't color manage this document" (ignore embedded profiles) ------ is pretty mixed up (in my opinion)
    i will recommend reading JEFF SCHEWE and BRUCE FRASER for professional color management information

  • HT2534 These instructions are no working in iStore Canada, what are the right instructions for this country?

    Following http://support.apple.com/kb/HT2534?viewlocale=en_CA&locale=en_CA
    These instructions are not working in iStore Canada, there is no NONE payment option.
    It does work in iStore Mexico tho... I created an account there and added the NONE method but if I try to switch my country to Canada it asks me for a card again.
    Now I have a gift code from a friend in Canada that I cannot claim because iStore Mexico says I can only claim it in iStore Canada and I am not able to switch country without a credit card.
    PS: I do live in Canada and have a canadian card but I have no intention to input my card number even if they don't charge me.
    Thank you!!

    Thank you!
    Here is what I did:
    Log off and restart iTunes.
    Logged it with the account I opened for Mexico.
    Changed my account region to Canada.
    This started the account open section for Canada.
    Now I followed the registration process again and found it loaded my mexican account information including the NONE option.
    I fixed the address to Canad and finished.
    My account got configured and I managed to redeem my gift.
    Thank you!

  • VMI and  reduce Stock in Transit - what are the right methods?

    Hi Gurus,
    We are using APO system to implement VMI functionality to replenish stock at customer location.  We need to build stock in transit at customer location after PGI happens in ECC.  
    Now, stock in transit is show up in 'Stock in transit' key figure, but the question is how to reduce stock in transit once it is received at customer location.
    SAP recommends following four methods to reduce:
    http://help.sap.com/saphelp_scm2007/helpdata/en/f1/f69a3dcbcfac53e10000000a114084/frameset.htm
    1.  Goods receipt information is not sent from the customer to the vendor
    2. The open purchase order quantity is sent from the customer to the vendor
    3. A proof of delivery is sent from the customer
    4.  The stock in transit quantity is sent from the customer to the vendor
    Out of these 1 and 2 methods are feasible in our scenario.
    Please share your experience if you have used any of these methods, I want to hear from someone who implemented any of these methods before deciding on a method.
    Thanks in advance,
    Niranjan

    Dear Niranjan,
    I have implemented SCM-APO VMI using Past Releases of SCM  (version 4.1) for upto 300 Customer Sites & 500-1000 Products.
    In my experience ... this is a Big Custom Development using EDI - IDOCs / ALE wherein you Receive from Customer the Data either as "Open Orders" or  "Goods Receipt" of VMI Order at Customer Store or "In-transits" as they view it.  There is a Facility to receive them in the PROACT IDOC but you have to write IDOC FUnction Modules to post the Data to the
    VMI Planning Area as well as at Product-Location you have to Daily Delete the In-transit Order (Category EI or AH for ASN) and Upload Intransit Quantity directly into Live-Cache as a Order.  The Development is also complex as you need to Map the VMI Customer Product to the Vendor/Manufacturer's Product COdes in SCM-APO.
    I have experience implementing VMI like this several years ago ... and I am not sure if SAP SCM-APO built anything Standard for the Interface over the years.    If you are not sure get a ALE/IDOC & ABAP Consultant or  XI Consultant to work with you on the Project. 
    You can Delete In-transit Quantities by using RLCDEL  Transaction for Category EI or AH (if ASNs are used).  You need a IDOC/ALE Development to Calculate and Upload In-Transits and Update into the VMI Planning Area as well as Download to a FILE which you can use via another ABAP Development to Upload In-transits at the Product-Location (Customer) in SCM-APO.
    Hope this helps.
    Regards,
    Ambrish Mathur

  • Ip_local_port_range - what are the right range

    Hi all,
    we got a little 'problem'
    Currently the range for the dynamic TCP/IP port allocation in our FlexFrame LINUX systems is from 9000 to 65500 (LINUX kernel parameter ip_local_port_range). That means, the pre-defined ports for sapstartsrv (5<inst>13 and 5<inst>14) could possibly be in use by other SAP processes. In that case the following error message in sapstartsrv.log is "soap_bind failed, Webservice thread enters retry loop".
    and now I ask myself ...  do I have to ignore that or should I define an other range for the ports ? From my point of view I think I cannot tighten the range because I do not know if there is any SAP service in my environment which get  problems with a modified range.
    I read that Oracle request the range from 9000 to 65000. We use DB2 as database for our SAP services. But I think even with DB2 I'm not able to tighten my range.
    Any idea to me how I can get rid of my issue ?
    Kind regards
    Karlheinz Heger

    I feel you can change the port range from 52000 to 61000 as this port range is assigned for client applications to connect to a server on a dedicated port .
    Check by changing the range . If that works it should be fine, as you will not have 9000 client applications connecting to a sever from the system .

  • How to escape newline character(nl) in file content conversion parameter?

    Hi Experts,
    How to escape newline character(nl) in file content conversion parameter?
    For example:
    field1field2field3
    field4field5field6
    Means Item is splitted in two lines.
    I want to SKIP new line character
    and to collect all SIX fields.
    What will be the file content conversion parameter?
    Thanks in Advance..........

    Hi,
    as far as i know there is nothing in the standard. But the question is why dont you combine at mapping the fields into only structure?
    Regards,
    Udo

  • What are the best tools to test why Mac Pro is so slow?

    Hi,
    I have a 2 x 2.4 GHz quad core intel xeon with 6 GB 1066 MHz DDR3 RAM.  2 x 1 TB Western Digital disks (WDC WD1001FALS-41Y6A1 (boot disk- 50% disk free) and WDC WD1002FAEX-00Y9A0).  
    I am often surprised at how slow the machine works.  Especially when coming out of sleep mode, where the machine could take minutes just to show the login prompt.
    Yes, I do keep more than a few processes running all the time, but am I expecting too much?  After all it's got some reasonable horsepower.  When I check task manager its usually the Chrome renderers that are hogging up a core (or two) but there are still many cores left  (at least according to istat menus). 
    Anyway, I'm wondering what are the right tools to diagnosing the situation and how to improve it.  
    I've started off with disk utility and everything seems fine.
    Can someone please recommend my next steps?   Are there any freeware utilities? 
    thanks
    moosya

    Use this article to examine your Memory. You can take a screen shot (Command-Shft-4 and drag across the area to be captured) and post it using the little camera icon on the top of the reply window on the forums. Or answer these questions:
    How much total RAM.
    How much of the pie chart is Green?
    How much is Green + Blue?
    How many Pageouts since last Startup?
    How much Swap Used?
    Using Activity Monitor to read System Memory and determine how much RAM is being used

Maybe you are looking for