What are the setups required to perform any inventory transactions

Hello freinds .
What are the bare minimum mandatory setups required in order to perform any inventory transaction

H,
The steps required are as follows:
1. Define Location
2. Define Inventory Organizations
3. Define Sub Inventory Organizations
4. Define Shipping Networks
5.Define Items
These are minimum steps are required for a Inventory Transaction.
Thanks,
SYR

Similar Messages

  • What are the setup requirements for QTP to recognize objects in Macro Media Flash?

    What are the setup requirements for QTP to recognize objects in Macro Media Flash? I have already installed Flex plug-in 4.6 in QTP 11 but QTP still could reconize any objects in the application.

    Over_Nyquest
    Have you enabled the Remote Panel Server in the Web Server options on the server?
    Kyle B  |  Product Support Engineer  |  ni.com/support

  • What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.

    Hi Folks,
    Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
    Thank you.

    In case you don't have access to MOS :
    JBOSS : 5.1.2 EAP
    JDK : 1.6.0_38
    ORACLE :
    Oracle Exadata5
    Oracle 10gR2 (10.2.0.3)
    Oracle 10gR2 RAC (10.2.0.3)
    Oracle 11gR2 (11.2.0.2.0)
    Oracle 11gR2 RAC (11.2.0.2.0)

  • BAPI_SHIPMENT_COST_ESTIMATE  What are the min. required parameters to pass

    Hi All,
       I would like to know what are the minimum required  parameters to pass in BAPI BAPI_SHIPMENT_COST_ESTIMATE. And from which tables I can pull out that information to pass to this BAPI.
    Does this BAPI creates a shipment cost document in the system or just shows the estimate of the shipment cost.
    If it creates a shipment cost document then its good for me. but if it shows us just the estimate does it shows estimate for each delivery (total Qty, Unit Price & Total Price). 
    What will be the item category it will pick. I like to see it picks  basic price related item category.
    Does any body has used this bapi ?
    Appreciate your fast reply.
    Regards,
    Leona

    Hello, I´ll try to answer your question:
    1. is it possible to run the bapi without actual shipment number and the shipment ( & cost ) will be created in simulation mode ?
    I think that the bapi only run with external shipment number and only run in simulation mode, that´s mean the bapi can not create any shipment and cost document, if you want to create a shipment use BAPI_SHIPMENT_CREATE, to create a cost document I don´t know if there is a bapi but you can create easily with transaction VI01 (batch-input)
    The shipment number that you use to call the bapi is a ficticious number always between external range indicated in field V_TVTK-NUMKE with the shipment type that you use.
    2. is it possible to perform estimation to inbound shipments ?
    Yes it´s depend on the shipment type. In standard system 0010 is used
    In the example that I have I use an inbound delivery
    3. does the bapi creates shipment and scd in simulate mode like transaction VICI ( from sales order ) ?
    I think that the bapi only run in simulation mode and it can not create any document
    4. is there any problem if i customized my scd item categories to open manualy ?
    I think that the bapi needs to work properly automatic iten categories
    can you please post sample code ( or any other doc's ) for this bapi ?
    I send you a document with an example if you give me an e-mail because I don´t know how to attach a word document
    Best regards,

  • What are the Things required for BI 7.0 Implementation project

    Hi Friends,
                      Can any one suggest me
    1.What are the Things required for BI 7.0 Implementation project?
    2.System Configurations & Hardware Components?
    3. Any additional steps...
    plz suggest me.
    Regards

    Hi lakshmi,
    http://csc-studentweb.lrc.edu/swp/Berg/articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt#426,3,Why Upgrade u2013 end of supportu2026
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
    https://wiki.sdn.sap.com/wiki/x/JYk
    Check the following links.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    check the following
    http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
    business content
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
    https://websmp203.sap-ag.de/co
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm

  • What are the settings required to maintain consignment storgae location

    Hi, what are the setting required to maintain new consignmnet storgae location for a customer.
    Thank you.

    Here I am giving you over all idea of Consignment:
    Consignment goods are goods which are stored at the customer location but which are owned by your company. The customer is not obliged to pay for these goods until they remove them from consignment stock. Otherwise, the customer can usually return consignment goods which are not required.
    Consignment processing offers the participating partners several advantages. Customers store the consignment goods at their own warehouses. The customer can access the goods in the consignment warehouse at any time. They are only billed for the goods when they are removed from the warehouse and only for the actual quantity taken.
    consignment stock must be
    Managed separately from the rest of your stock so that you know exactly what stock is stored at the customer location
    Managed separately for each customer
    In inventory management, the consignment stock is managed as special stock in your inventory and is assigned to specific customers. This enables you to keep track of returnable packaging stock by customer.
    If the consignment stocks are not managed by the sold-to party but by a central office, you can use the partner function for special stock partner.
    Prerequisites
    Special Stock Partner
    The special stock partner has been defined for carrying out consignment stock processing by means of a third party rather than the customer. This means you can manage all special stock under one partner. It makes sense to use the special stock partner if your customer is using decentralized order processing but manages consignment stock centrally.
    Inventory Management Using the Special Stock Partner
    If you want to process your consignment goods using a special stock partner, proceed as follows:
    Create a customer master record for the special stock partner (account groups 0001 and DEBI are defined for this purpose in the standard system).
    Enter the special stock partner in the relevant customer master record on the partner screen using the partner function SB.
    When you create an order for this customer, the system automatically proposes the partner function SB in the document header and the document items. Consignment goods which have been entered in a consignment fill-up are always posted to the stock of the special stock partner when goods issue is carried out. You can also enter the partner function SB manually in the document header or in the relevant items if a special stock partner is required and is not proposed from the customer master record. If a special stock partner does not exist in the document header, inventory management is carried out using the sold-to party.
    Process Flow
    There are four main transactions for processing consignment stock in the R/3 System, all of which support separate management of stock:
    Creating a Consignment Fill-Up
    Creating Consignment Issue
    Creating a Consignment Pick-Up
    Displaying Consignment Returns
    Consignment fill-up
    Consignment fill up is used to supplement the customer’s consignment stock.
    Goods issue of the appropriate stock is posted from the unrestricted-use stock to consignment stock (special stock). The goods remain in the possession of the vendor.
    When you ship consignment stock to the customer, you record the transaction by creating a consignment fill-up order (order type KB). As a result, the system carries out the following actions:
    If special stock does not yet exist in your inventory for the customer (or special stock partner), the system creates it when goods issue is posted
    The relevant quantity is removed from regular inventory in your plant and is added to the special stock for the customer. The total valuated stock for the plant remains the same.
    The transaction is not relevant for pricing since the consignment stock remains the property of your company.
    Consignment pick-up
    Consignment issue enables the customer to take consignment goods from the special stock for their use or to sell.
    Consignment issue involves removing the goods from the special stock and making it the property of the customer.
    When the customer removes consignment stock to use or sell, you record the transaction in the system by creating a consignment issue order (order type KE). As a result, the system carries out the following actions:
    When goods issue is posted, the relevant quantity is deducted from both the customer’s special stock and your own total valuated stock.
    The transaction is relevant for pricing since the goods now become the property of the customer.
    Consignment issue
    Any consignment goods stored at the customer’s warehouse that haven’t been used can be reposted to your company’s warehouse with a consignment pick-up.
    If the customer returns consignment stock to you, you record the transaction in the system by creating a consignment pick-up order (order type KA). As a result, the system carries out the following actions:
    When goods issue is posted, the relevant quantity is deducted from the customer’s special stock and is added back into your regular stock at the plant where the goods are returned. Your total valuated stock remains the same since the returned stock was regarded as part of your own inventory even while it was at the customer’s premises.
    This transaction is not relevant for billing.
    Consignment return
    Consignment returns are used for when your customer wants to return goods to the consignment stock.
    If the customer wishes to claim on consignment goods which have already been issued, you can record this transaction by creating a consignment return order (order type KR). As a result, the system carries out the following actions:
    When goods issue is posted, the relevant quantity is added to the customer’s special stock at the plant where the goods are returned
    Since the ownership of the goods is passed from the customer back to your company, the transaction is relevant for billing. In this case, the customer receives a credit memo for the returned goods.
    Depending on the settings in Customizing for Sales, you can create consignment returns with direct reference to a consignment issue. The consignment issue appears in the document flow for the consignment return. This function is not supported in the standard version of the SAP R/3 System.
    When you create consignment returns in the standard version of the SAP R/3 System, the system automatically sets a billing block. To credit a return, you must first approve the request for a credit memo by removing the billing block in the return header. You can control the automatic setting of a billing block in Customizing for Sales.
    The following table provides an overview of the order types used in the standard system for processing consignments:
    Transaction
    Sales order type
    Consignment fill-up
    KB
    Consignment issue
    KE
    Consignment pick-up
    KA
    Consignment return
    KR
    Pricing and Availability Check
    Whether pricing is carried out for the individual transactions depends on the item category. The schedule line category controls the availability check and the transfer of requirements in each of the transactions. The schedule line category itself is determined by the item category and the MRP type of the material. The order types KE and KA check against the consignment stock for the customer involved and order type KB checks against your own plant stock. Requirement records for consignment stock are stored as individual requirements, independently of the setting in the material master

  • What are the settings required to block a particular IP to make connection on particular port no running on another IP?

    Problem:
    -   What are the settings required to block a particular IP to make connection on particular port no running on another IP?
    Environment:
    Operating System            : - Windows XP Service
    Pack 1
    System type                     : - 32 – bit Operating System
    Description: - We
    have requirement to block Port access from particular IP. It is specific requirement for a machine.
    We have service which is running on
    Server with IP: - 10.14.15.116 on
    Port Number 3366 and we need to
    block Client Machine IP: - 10.14.15.114 to make
    any connections with server on this port. Not even client machine
    should be able to telnet on server on port 3366.
     I
    will be really thankful.
    For any kind of input which can assist us to complete the requirement.

    Does it allow in same way with firewall setting in Windows Server 2008?
    I will read in details shared link, but as a matter of urgency; kindly let us know, if we can follow some concise instruction to do above activity.
     I
    will be really thankful

  • What are the minimum requirements to successfully Synchronize a SharePoint 2010 Calendar or Task List with Outlook 2010?

    What are the minimum requirements to successfully Synchronize a SharePoint 2010 Calendar or Task List with Outlook 2010?
    SharePoint permission levels required for the user profile?
    Does the user need top level permissions on the SharePoint site?
    What other minimum requirements must be met for Outlook 2010 to synchronize successfully with SharePoint 2010?
    TheDrape

    Hi,
    To synchronize these libraries and lists, you must have Outlook 2010 installed on your client computer and you must have Collaborate permission to the library or list.
    You don’t need any permissions for the user profile.
    I provide you a link about synchronizing SharePoint 2010 content with Outlook 2010 for your reference:
    http://office.microsoft.com/en-us/sharepoint-foundation-help/synchronize-sharepoint-2010-content-with-outlook-2010-HA101881295.aspx
    Thanks,
    Rock Wang
    Rock Wang TechNet Community Support

  • What are the System Requirements for Web Server hosting Adobe Air application

    Working on a project that is using Adobe Air . The Adobe support site has system requirements for the client side application, but for the server side, what are the system requirements?
    Using a Windows server, would expect to have approx. 100 concurrent connections at any given time.

    Adobe AIR applications are installed on the end user's computer. They are not hosted on a web server. You can deploy an AIR file, which is the installer file for an AIR application, via your web server.

  • What are the network requirements for the Remote Panel Server?

    What are the network requirements for the Remote Panel Server?
    I've been trying for a while now to setup a Remote Panel.  I can connect to my computers remote panel from other computers on my LAN but nowhere else.  
    When ever I use the web publishing tool it gives me a URL in this format:  http://Computer-Name.Corporate-Name.local:8086/VI-Name.html Apparently this means I have a local DNS server and this URL has no meaning from the public.
    When I try connecting with the Operate>>Connect to Remote Panel..., I get this error message:
    "Connecting to remote panel server...
    Remote panel connection refused by specified server: Make sure LabVIEW Web Server is enabled on specified server"
    I got the same error when I tried to host a remote panel from my laptop at home, on my Wi-Fi.  Is there some network or firewall setting I'm not seting?  Could it be my server or router or private network?
    My goal is to be able to host Remote Panels from my laptop while I am travailing internationally, by using 4G mobile internet.  Is that even passable?
    Solved!
    Go to Solution.

    Over_Nyquest
    Have you enabled the Remote Panel Server in the Web Server options on the server?
    Kyle B  |  Product Support Engineer  |  ni.com/support

  • What are the system requirements for Firefox 4

    What are the system requirements for Firefox 4.0? There's all sorts of information on how to improve performance, etc., etc. However, I cannot find the simple list of system requirements that most software companies put on their web site (i.e. RAM and processor speed). This simple information seems to be completely misssing!

    They are available here: http://www.mozilla.com/en-US/firefox/4.0/system-requirements/

  • What are the settings required for QM in procurement

    Hi Team,
    What are the settings required for QM in procurement. I have  set indicator for QM in procurement in QM view in material master.
    I am not clear about  following fields to be maintained in QM view.
    QM Control Key
    Certificate type
    Target QM system
    Tech. delivery terms Indicator.
    Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
    Thanks

    Hi,
    All meaning are
    QM Control Key :
    If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
    Certificate type :
    Certificate types applies to the Certificate processing in procurement  &  Certificate creation
    Target QM system :
    whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
    -  If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
    -  If you want Vendor's perticular certificate for Material then you have to define Certificate type.
    Also, you have to maintain Material, Vendor's Info record at plant level.
    Thanks,
    JM

  • What are the infotypes required for maintaining benefits....

    Hi
    Please help ...
    What are the ingotypes required for maintaing benefits....

    Hi Srikanth,
    Please find below the list of Infotypes required for maintaining benefits:
    1. General Benefits Information (Infotype 0171)
    2. Adjustment Reasons (Infotype 0378)   
    3. Health Plans (Infotype 0167)  
    4. Insurance Plans (Infotype 0168)  
    5. Savings Plans (Infotype 0169)  
    6. Flexible Spending Account (Infotype 0170)  
    7. Miscellaneous Plans (Infotype 0377)  
    8. Family/Related Person (Infotype 0021)
    There are also other benefits infotypes e.g. Stock Purchase Plans (Infotype 0379), Credit Plans (Infotype 0236) and many COBRA and retirement plan infotypes but these are used based on the company requirement.
    I hope this helps.
    Regards,
    Anand Jalan
    Edited by: Anand Jalan on Jan 6, 2010 9:50 PM
    Edited by: Anand Jalan on Jan 6, 2010 9:52 PM

  • What are the jars required for prepare portlet tool?

    what are the jars required for prepare portlet tool which converts portlets to .portlet.

    HI
    you will  have to create manager as portal role and assigned to them  necessary worksets containing necessary worksets  look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions  and applications you need to do it .please do not forget to give points
    with regards
    subrato kundu

  • What are the roles required for MSS

    What are the roles required for MSS in R/3.
    I have created ESS roles. But need to find for MSS.
    I am able to see the PERNR in ESS on portal which created in R/3.
    I need to get my staff on portal.
    What config is required for this.
    MSS User.

    HI
    you will  have to create manager as portal role and assigned to them  necessary worksets containing necessary worksets  look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions  and applications you need to do it .please do not forget to give points
    with regards
    subrato kundu

Maybe you are looking for