What are the steps to remove popup survey requests?

On all browsers and all websites that I go to I keep getting these annoying popup survey requests.
Can anyone tell me what steps are needed to get rid to this problem.
Thanks

You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Similar Messages

  • What are the steps to remove SMS Provider traces from a server

    Hi,
    My client's environment is set up with a standalone primary site. They decided to install a second SMS Provider on a site system also running the Reprting Services Point to provide redundancy in the case the SMS Provider on the primary site
    would go down.
    They experienced a problem with the server running the second SMS Provider and it went down for about a day. The behavior for SCCM console users was to get an error message preventing them to connect to SCCM; they had to close the console and re-launch it
    so it would randomly connect to the SMS provider on the primary site successfully. When a SMS provider is down, it seems the console won't redirect itself automatcally to another provider when trying to connect.
    Since it was causing some frustration because console users had to launch it several times before they could connect, someone removed the second SMS Provider using the Site Maintenance wizard on the primary site. The thing is the wizard ran while the second
    SMS Provider was down, it removed traces of this SMS Provider from the site configuration, but couldn't remove the actual SMS Provider files and registry entries since the server was down.
    Now, only one SMS Provider is active on the primary site server, but we have orphaned SMS Provider files and registry keys on the site system server. Is there a way to remove them cleanly? The site system is still running the Reporting Services Point, so
    we cannot remove everything related to SCCM.
    Now we prefer to keep a single SMS Provider on the primary site server, since SCCM is not consider critical to the business anyway, and to avoid this issue in the future.
    My guess would be to reinstall the SMS Provider from the Site Maintenance wizard and remove it after, but I just want to have feedback from people who might have deal with it in the past.
    Tnx for help
    Patrick

    Hi,
    Could you install the SMS Provider from the Site Maintenance wizard while SMS Provider files and registry entries are still there? Please have a look on the thread below, although it is for sccm 2007.
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/bb307748-7638-404d-a6a4-982827a051c8/how-do-i-remove-sql-provider-that-was-previously-installed-on-a-remote-sql-server?forum=configmgrsetup
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • What are the steps in deleting in add remove to install a clean version of itunes/quicktime?

    what are the steps in deleting in add remove to install a clean version of itunes/quicktime?
    What has to go, in order, like itunes-quicktime-mobile me, or?

    There are two part when installing WebEnt.. The first one is the web server part where it installs the fortecgi.exe or other web server components. This should be installed where the web server is going to be running. This is usually not you development server. The second part is the http library and web designer part. This should be installed on the development server. The http library need to go through a install of its own to make it part of the central environment. After that all the developers will have access to the http library and all they will need to do is install the Web desinger part.
    Hope this helps.
    ka

  • What are the steps to make it seamless for a customer to use the install program and then use the installed program?

    I wrote an install program (.exe) that is downloaded from a website.  When run, it 1) leads a customer to browse to a directory, and 2) copies files (.exe, .dll, etc.) from a website to that directory.  When I run, the installed program works.
    What are the steps to make it seamless for a customer to use the install program and then use the installed program? 
    bhs67

    This site https://msdn.microsoft.com/en-us/library/vstudio/2kt85ked%28v=vs.110%29.aspx provides a basic description of the Visual Studio Windows Installer. 
    Near the bottom of the page is "You can unlock all the features of InstallShield by paying to upgrade to the full version of InstallShield."  Where do I find info that describes the differences between the "free" and the "full"
    versions?
    bhs67
    Hello,
    The default feature does support the task for your requirement, so there is no need to pay for the other features unless you want to use some feature which is not free.
    In addition, as this thread
    InstallShield LE not available with VS 2012 RTM? shared, even through there is a link to InstallShield LE in the New Project dialog under Deployment solutions, but it belongs to third-party that I would recommend you consider posting this issue
    at the following forum to get supports about InstallShield.
    http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
    Regards.
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What are the steps to migrate j2ee project from version 1.4 to 1.6

    Hi All,
    What are the steps to migrate java project from version1.4 to 1.6 and weblogic 9 to 12c.
    Currently my application(java version1.4) is running on weblogic 9, i want to migrate it to weblogic 12c, what are the major steps i have to follow.
    Please anyone of you help me as soon as possible.
    Thanks,
    Yugandhar.G

    Hi Jeet,
    The following are the logs for exception.
    <Dec 13, 2012 12:04:52 PM CST> <Warning> <Socket> <BEA-000449> <Closing the socket, as no data read from it on 0:0:0:0:0:0:0:1:52,370 during the configured idle timeout of 5 seconds.>
    <Dec 13, 2012 12:07:14 PM CST> <Warning> <Deployer> <BEA-149251> <Operation Remove failed for application "tcs". Error: java.lang.NullPointerException
    java.lang.NullPointerException
         at weblogic.servlet.internal.WebAppModule.remove(WebAppModule.java:851)
         at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:236)
         at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:223)
         at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:148)
         at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:138)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.NullPointerException
         at weblogic.servlet.internal.WebAppModule.remove(WebAppModule.java:851)
         at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:236)
         at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:223)
         at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:148)
         at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:138)
         Truncated. see log file for complete stacktrace
    >
    <Dec 13, 2012 12:07:14 PM CST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID "1355371555961" for task "1". Error is: "java.lang.ArrayIndexOutOfBoundsException: 8"
    java.lang.ArrayIndexOutOfBoundsException: 8
         at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
         at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ArrayIndexOutOfBoundsException: 8
         at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
         at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
         Truncated. see log file for complete stacktrace
    >
    <Dec 13, 2012 12:07:14 PM CST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application "tcs".>
    <Dec 13, 2012 12:07:14 PM CST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    java.lang.ArrayIndexOutOfBoundsException: 8
         at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
         at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ArrayIndexOutOfBoundsException: 8
         at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
         at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
         Truncated. see log file for complete stacktrace
    >
    <Dec 13, 2012 12:07:17 PM CST> <Error> <Console> <BEA-240003> <Administration Console encountered the following error: weblogic.application.WrappedDeploymentException: 8
         at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
         at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
         at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
         at weblogic.application.utils.annotation.ClassfinderClassInfos.populateClassInfos(ClassfinderClassInfos.java:137)
         at weblogic.application.utils.annotation.ClassfinderClassInfos.<init>(ClassfinderClassInfos.java:28)
         at weblogic.application.utils.annotation.AnnotationMappingsImpl.loadAnnotatedClasses(AnnotationMappingsImpl.java:69)
         at weblogic.application.internal.ApplicationContextImpl.processAnnotationMappings(ApplicationContextImpl.java:985)
         at weblogic.application.internal.ApplicationContextImpl.getAnnotatedClasses(ApplicationContextImpl.java:1010)
         at weblogic.j2ee.managedbean.ManagedBeanModuleExtensionFactory.create(ManagedBeanModuleExtensionFactory.java:43)
         at weblogic.servlet.internal.WebAppModule.initModuleExtensions(WebAppModule.java:562)
         at weblogic.servlet.internal.WebAppModule.init(WebAppModule.java:271)
         at weblogic.servlet.internal.WebAppModule.init(WebAppModule.java:636)
         at weblogic.application.internal.flow.ScopedModuleDriver.init(ScopedModuleDriver.java:162)
         at weblogic.application.internal.ExtensibleModuleWrapper.init(ExtensibleModuleWrapper.java:74)
         at weblogic.application.internal.flow.ModuleListenerInvoker.init(ModuleListenerInvoker.java:84)
         at weblogic.application.internal.flow.InitModulesFlow.initModule(InitModulesFlow.java:312)
         at weblogic.application.internal.flow.InitModulesFlow.initModules(InitModulesFlow.java:325)
         at weblogic.application.internal.flow.InitModulesFlow.prepare(InitModulesFlow.java:378)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:706)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:35)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:237)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:61)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:158)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:96)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:229)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
         at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >

  • What are the step to Cancel the iStore order hold

    Hi All,
    What are the steps to cancel the Order hold option in iStore, and OM all the orders for all user getting hold, Please tell me what are the steps to Cancel this hold option.
    Thanks
    Vivek

    like below i set the profile options
    ASO: Credit Card Authorization = No
    ASO: Default Order State profile = Booked
    IBE: Perform Payment authorization = Yes
    and i removed the OM>> Customer >> standard >> credit Check option then also i am getting the same hold issue.
    Your order is on "Hold" with Order Number 17968
    Please print this page and keep it for your records. If you are faxing your credit card number or purchase order, remember to complete the Faxed Order section below before faxing.
    Thanks
    Vivek

  • What are the steps to change existing sharepoint 2010 farm database server to a new server

    Hi
    i have a sharepoint 2010 farm and backend with sqlserver2012 standard edition on windows server 2008 r2 server
    now what are the steps to if  want to  connect this farm to a new sql server 2012 on windows server 2012 server and remove this existing server
    adil

    You have two options:
    Use a SQL Alias and you will then need to swing all databases over to the new SQL Server
    Don't use a SQL Alias and swing all but the Configuration and Administration databases to the new SQL Server, and individually re-configure Service Applications/Web Applications to use the new SQL Server. This will force you to keep the old SQL Server around.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • What are the steps if; the disk cannot be partitioned because some files cannot be moved

    I'm to install windows XP software, and I can partition the disk.  If state, "The disk cannot be partitioned because some files canot be moved."  What are the steps to complete partition to install windows XP?

    Ok  what happens with Bootcamp is it needs to carve out a contiguous free space at the bottom of your hard drive.
    If it can't do that then it can't make the partition.
    What has happened is there are some files down in closer in the bottom part of the drive, this occurs if you've had a hard drive nearly full, performed a software update, installed programs and then removed some files leaving parts and large empty spaces.
    So what to do to fix this?
    Well your going to have to learn how to clone your OS X boot partition, with all your programs and files to a external drive, which you can then hold the option key and boot from it.
    Then you run Disk Utility from the clone, erase the OS X partition on the internal drive and clone everything right back.
    This will place everything in order, move everything up and nice and compact at the top of the drive, which will allow you to make a BootCamp partition as big as you have room for.
    It will also make your comptuer perform a bit faster too.
    Cloning back and forth is rather safe, because you always have a hold option key bootable clone, either on the internal drive or the external drive, your computer will work from either.
    What you don't want to use is Defrag software, that moves things around while the computer is running and messes things up quite a bit and really doesn't optimize as well or as safely as a clone.
    In fact I just assisted a person who did just that and royally messed up their machine, requiring a complete rebuild of everything.
    So read through this thread of mine and grasp things and you'll be cloning your boot drive in no time.
    https://discussions.apple.com/message/16276201#16276201
    Remember that cloning can't clone Filevaulted drives or Bootcamp partitions, also it only (at this time) clones the OS X partition, which for Snow Leopard is the whole drive usually (minus Bootcamp partition.)
    However if your on Lion, Carbon Copy Cloner doesn't quite yet clone the hidden Lion Recovery Partition, so when you clone you won't have it on the external drive but the computer will boot off the external drive just fine without it.
    So when you go to erase the Lion internal drive, you need to erase only the OS X Lion Partition not the entire drive before reverse cloning.
    You should make a Lion Recovery USB if you have Lion, as only through Lion Recvoery can you reinstall Lion now. Instrucitons are in my thread.
    The way you can tell if your selecting a partition or a entire drive in Disk Utility is how far left it is.
    The far left are devices and the slightly indented items are partitions or media using that device.
    Good Luck

  • I have Lightroom 4 and my hard drive is getting too full wiht pictures i have in lightroom. I want to move many to a thumbdrive and delete them from lightroom. what are the steps to perform this please ?

    I have Lightroom 4 and my hard drive is getting too full wiht pictures i have in lightroom. I want to move many to a thumbdrive and delete them from lightroom. what are the steps to perform this please ?

    If you want to be able to view, edit and export from Lightroom you can move the files using your computer OS (explorer or finder) and update the folder location by right-clicking on the folder name in the LR Library. See fig 8 at the attached link:
    http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
    This will work when the thumb drive is connected.
    If you really have no need to keep these files off-line in LR then simply move the files, select all the thumbnails in the LR Library and hit delete. Then choose remove.

  • Currently running OSX 10.6.8 and Safari 5.1.10. What are the steps to update my IMAC?

    I'm currently running OSX 10.6.8 and Safari 5.1.10. What are the steps to get my IMAC totally up-to-date?

    Back up your data, check your applications for compatibility, and download Yosemite from the Mac App Store.
    (116042)

  • How do I unlock an iphone 5 with Sprint. The SIM is in and Sprint gave me the unlock code, but what are the steps to unlock it?

    How do I unlock an iphone 5 with Sprint 15.1 at IOS 7.0.6 IMEI 99 000320 012095 0 .
    The SIM is in and Sprint gave me the unlock code, but what are the steps to unlock it?

    There is no such thing as an unlock code.   Sprint may have processed the unlock, and then requested you restore the iPhone using iTunes to complete it. But that's it. There is no code to enter, and nowhere to enter it any way.
    iPhone: About unlocking

  • How do i get my apple ID from my old iphone 5 to my new iphone 6 ? what are the steps? because last time i tried getting my apple ID from my old to new phone it all went wrong and i could not sign in or use imessage? thanks

    How do i get my apple ID to work from my old iphone 5 to my new iphone 6? what are the steps? as last time i tried this everything went wrong my imessage would not work and it would not let me sign in?

    Try TransPhone, it's working fine, but a bit expensive...
    After installing this, you'll Be able to send/recieve music, contacts, text messages, photos and Videos over bluetooth. Works fine with all mobile phones and computers...
    I may receive some form of compensation, financial or otherwise, from my recommendation or link
    <Edited by Host>

  • What are the steps would liket take using AR,AP,GL Datasource in R/3

    Hi,
    When i would like to use SAP content data source Like ,AR,AP,GL
    data source what are all the master data need to activate for this.
    Ex: for AR we need to activate the Customer master data
    what abt AP,GL what are the master data need to be activated while using SAP content data source in R/3.

    <i>What are the steps i need to do in source system?.First of all identify the data source and what are the master data need to be used for the data source like AP,AR,GL in R/3.</i>
    Find out what Cubes, ODS's will be used  - > HELP.SAP using the datasource.
    Activate transaction datasources.
    See Infosource Overview and activate relevant master datasources in RSA5 - ECC.
    Install content on BI side.
    It doesnot matter what datasources you activate first, it is just a preferred way to load transaction data only after master data.
    <i>What are all the masterdata need to activate before going to activate AR,AP,GL data source in R/3.</i>
    Infosource Overview

  • What are the steps need to be taken care  for MM data sources  while extrac

    what are the steps need to be taken care  for MM data sources  while extracting  from R/3 tables
    and please provide the Steps involved in R/3 side
    thnaks
    Racha

    Hi,
    For Inventory Management, you can have a look at the following link.
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]

  • What are the steps for loading master data

    Hello
    what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
    if anyone has documents please send me the documents i will be really greatful
    [email protected] thanks everyone
    Evion

    Hi Heng,
    Download the data into a CSV file.
    Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
    http://www.sap-img.com/abap/vendor-master-upload-program.htm
    Reward Points for the useful solutions.
    Regards,
    Harini.S

Maybe you are looking for

  • Problem using iPad mirroring with an Apple TV and 4:3 Projector

    I'm a teacher and I've been using my iPad 2 in the classroom for about a year and a half. I would use Apple's VGA Adapter to connect to my projector, which worked fine. I just didn't like being tied down, and the dock connector would come loose very

  • Can't load an image in flash builder

    Hi, I recently copied my project from one computer to another.  On my old computer, everything worked fine, but on my new computer, when it tries to load images, it gives me this error : Error #2148: SWF file http://localhost/MyProject-debug/MyProjec

  • PAC file not working in IE 9

    I have the IE9 browser set to use the PAC file, but it does not send traffic to the WSA.  I have tried it locally from the C: drive and downloading it from the WSA PAC source.  Putting the link to the file opens it from either location.  It seems tha

  • Webcam capture works fine in JMFStudio, not in Eclipse

    Hi all, I search the forum, but can't find any answer ! I'm trying to capture a webcam using JMF Performance Pack on XP64. I can read the webcam in JMFStudio, but when using some code to do it, for instance in eclipse, it says : java.io.IOException:

  • Errors encountered installing dowload of NIRIO 2.1.3.

    Just downloaded NIRIO 2.1.3 and trying to install. During install, receive error message: .\ConfigInfo.cpp(2653): IInstallerError 11006 Developer Error. The following errors were found in your ini file: 1. Specified file not found: [MsiEngine] WinNTP