What are the tables rfpdo and rfpdo1?

what are the tables rfpdo and rfpdo1?
wht are these fields?
rfpdo-allgstid
rfpdo1-allgfael

Look at <a href="http://help.sap.com/saphelp_46c/helpdata/en/40/5f3275e24bd111950d0060b03c6b76/frameset.htm">Data Collection Programs for FI-GL, FI-LC, CO-OM and CO-PA</a>
<i>Data Collection Programs for FI-GL, FI-LC, CO-OM and CO-PA
Description
1. Data retrieval from the FI general ledger With the report RFBILA00, data from the balance sheet and the P+L statement can be transferred to SAP-EIS. Detailed information on this is stored with the corresponding parameter of the report RFBILA00 (RFPDO-BILA_EIS).
2. The interface to FI-LC has been revised and the sender structure enhanced. AS sender field names were changed, it is necessary to adapt transfer rules created in release 2.2. Detailed information on this interface is contained in the online help for transfer program RGCEISS1.
3. CO-PA data can be transferred into SAP-EIS using a basic report. More information on this can be found in the Implementation Guide of SAP-EIS.
4. Data from CO-OM can be transferred to SAP-EIS using Report Writer reports. Since reports must fulfill certain conditions for the data transfer, standard reports in the report group '1EI' are delivered for CO-CCA. From the same group, you can define reports which transfer data from CO-OPA to SAP-EIS. You will find more information on this in the implementation guide.</i>
Regards

Similar Messages

  • What are the tables PHO and LOC of OIM Schema?

    Hi,
    In the schema documentation of OIM tables you have the following description for the tables PHO and LOC:
    LOC - Holds information about locations
    PHO - Holds all communication addresses for this contact -- e.g., contact telephone numbers,fax numbers, e-mail, etc.
    When those have have some records? I haven't seen yet any form ou function where I can put some information like that.
    I don't have any problem with them and it is just for curiosity. As I understand the OIM User Model, I thought those tables were part of OIM User Model, where:
    Organization (field ACT_Key of USR table)
    Location (I guess table LOC but it is always empty in my env). There is a field USR_LOCATION but it is not shown by default.
    User Group (all groups a user is member are in the USG table)
    User Defined Fields (all fields start with USR_UDF of USR table)
    Manager (USR_MANAGER that is alwasys empty and USR_MANAGER_KEY that has the Key of User's Manager)
    Organization (ACT_KEY of USR table)
    Contact Information (I guess it is the table PHO)
    Thanks,
    Renato.

    They probably serve no purpose anymore but might have been used at some point during the life cycle of the product.
    -Kevin

  • What are  the tables and fields  in fico & sd module

    what are  the tables and fields  in fico & sd module

    Hi,
    <b> Sales and Distribution:</b>
    Customers KNA1 General Data
    KNB1 Customer Master – Co. Code Data (payment method, reconciliation acct)
    KNB4 Customer Payment History
    KNB5 Customer Master – Dunning info
    KNBK Customer Master Bank Data
    KNKA Customer Master Credit Mgmt.
    KNKK Customer Master Credit Control Area Data (credit limits)
    KNVV Sales Area Data (terms, order probability)
    KNVI Customer Master Tax Indicator
    KNVP Partner Function key
    KNVD Output type
    KNVS Customer Master Ship Data
    KLPA Customer/Vendor Link
    Sales Documents VBAKUK VBAK + VBUK
    VBUK Header Status and Administrative Data
    VBAK Sales Document – Header Data
    VBKD Sales Document – Business Data
    VBUP Item Status VBAP Sales Document – Item Data
    VBPA Partners
    VBFA Document Flow
    VBEP Sales Document Schedule Line
    VBBE Sales Requirements: Individual Records
    SD Delivery DocumeLIPS Delivery Document item data, includes referencing PO
    LIKP Delivery Document Header data
    Billing Document VBRK Billing Document Header
    VBRP Billing Document Item
    SD Shipping Unit VEKP Shipping Unit Item (Content)
    VEPO Shipping Unit Header
    <b>Financial Accounting</b>
    FBAS             Financial Accounting “Basis”
    BKPF             Accounting Document Header              BUKRS / BELNR / GJAHR
    BSEG             Accounting Document Segment             BUKRS / BELNR / GJAHR / BUZEI
    BSIP             Index for Vendor Validation of Double   BUKRS / LIFNR / WAERS / BLDAT /
                     Documents                               XBLNR / WRBTR / BELNR / GJAHR / BUZEI
    BVOR             Inter Company Posting Procedure         BVORG / BUKRS / GJAHR / BELNR
    EBKPF            Accounting Document Header (docs from   GLSBK / BELNR / GJHAR / GLEBK
                     External Systems)
    FRUN             Run Date of a Program                   PRGID
    KLPA             Customer / Vendor Linking               NKULI / NBUKR / NKOAR / PNTYP
                                                             / VKULI / VBUKR / VKOAR
    KNB4             Customer Payment History                KUNNR / BUKRS
    KNB5             Customer Master Dunning Data            KUNNR / BUKRS / MABER
    KNBK             Customer Master Bank Details            KUNNR / BANKS / BANKL / BANKN
    KNC1             Customer Master Transaction Figures     KUNNR / BUKRS / GJHAR
    KNC3             Customer Master Special GL Transactions KUNNR / BUKRS / GJAHR / SHBKZ
                     Figures
    LFB5             Vendor Master Dunning Data              LIFNR / BUKRS / MABER
    LFBK             Vendor Master Bank Details              LIFNR / BANKS / BANKL / BANKN
    LFC1             Vendor Master Transaction Figures       LIFNR / BUKRS / GJHAR
    LFC3             Vendor Master Special GL Transactions   LIFNR / BUKRS / GJHAR / SHBKZ
                     Figures
    VBKPF            Document Header for Document Parking    AUSBK / BUKRS / BELNR / GJHAR
    FBASCORE         Financial Accounting General Services “Basis”
    KNB1             Customer Master (Company Code)          KUNNR / BUKRS
    LFA1             Vendor Master (General Section)         LIFNR
    LFB1             Vendor Master (company Code Section)    LIFNR / BUKRS
    SKA1             G/L Account Master (Chart of Accounts)  KTOPL / SAKNR
    SKAT             G/L Account Master (Chart of Accounts – SPRAS / KTOPL / SAKNR
                     Description)
    MAHNS            Accounts Blocked by Dunning Selection   KOART / BUKRS / KONKO / MABER
    MHNK             Dunning Data (Account Entries)          LAUFD / LAUFI / KOART / BUKRS /
                                                             KUNNR / LIFNR / CPDKY / SKNRZE /
                                                             SMABER / SMAHSK / BUSAB
    FI-GL-GL (FBS)   General Ledger Accounting: Basic Functions- G/L Accounts
    SKAS             G/L Account Master (Chart of Accounts – SPRAS / KTOPL / SAKNR / SCHLW
                     Key Word list)
    SKB1             G/L Account Master (Company Code)       BUKRS / SAKNR
    FI-GL-GL (FBSC)  General Ledger Accounting: Basic
                     Functions - R/3 Customizing for G/L Accounts
    FIGLREP          Settings for G/L Posting Reports        MANDT
    TSAKR            Create G/L account with reference       BUKRS / SAKNR
    FI-GL-GL (FFE)   General Ledger Accounting: Basic
                     Functions - Fast Data Entry
    KOMU             Account Assignment Templates for G/L    KMNAM / KMZEI
                     Account items
    FI-AR-AR (FBD)   Accounts Receivable: Basic Functions - Customers
    KNKA             Customer Master Credit Management :     KUNNR
                     Central Data
    KNKK             Customer Master Credit Management :     KUNNR / KKBER
                     Control Area Data
    KNKKF1           Credit Management : FI Status data      LOGSYS / KUNNR / KKBER / REGUL
    RFRR             Accounting Data – A/R and A/P           RELID / SRTFD / SRTF2
                     Information System
    FI-BL-PT         Bank Accounting: Payment (BFIBL_CHECK_D)  Transactions – General Sections
    PAYR             Payment Medium File                     ZBUKR / HBKID / HKTID / RZAWE /
                                                             CHECT
    PCEC             Pre-numbered Check                      ZBUKR / HBKID / HKTID / STAPL
    FI-BL-PT-AP(FMZA)Bank Accounting: Payment Transactions – Automatic Payments
    F111G            Global Settings for Payment Program for MANDT
                     Payment Requests
    FDZA             Cash Management Line Items in Payment   KEYNO
                     Requests
    PAYRQ            Payment Requests                        KEYNO
    Hope this solves your concern...
    Regards,
    Habeeb
    Assign points if helpful

  • What are the table names for CRM and APO?

    hi friends,
    what are the table names for CRM and APO?
    Regards
    suneel.

    hi Suneel,
    check in crm forum
    Re: SAP-CRM Tables
    BUT051 BP Relationship: Contact Person Relationship
    Similar to BUT050 , additionally contains Contact Person’s Address data
    BUT0BK Business Partner: Bank Data & Details
    BP Number, Bank Key, Bank Country Key, Bank Account Number
    BNKA Bank Master Data
    BUT100 BP: Roles
    ADR2 Telephone Numbers (Business Address Services)
    ADR6 SMTP Numbers (Business Address Services)
    Contains Email – Id of the BP.
    ADRC Addresses (Business Address Services)
    BP’s Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
    TSAD3T Table containing the Title text against a Title No.
    COMM_PRODUCT Master Table for Product
    CRMM_BUAG Master table for Business Agreement
    CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
    Note:
    1. It doesn’t store the Business Partner
    responsible for the transaction. To
    get the Partner No, link it with
    CRM_ORDER_INDEX.
    2. This table can be used for search
    based on the Object Id(Business
    Transaction No).
    CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
    CRMC_PROC_TYPE Master table Business Transaction Type
    CRMC_PARTNER_FCT Definition of Partner Functions
    SCPRIOT Priorities for Activities with priority text.
    CRMC_PROC_TYPE_T Text for a transaction type
    CRMC_ACT_OBJ_T Objective Number and Text for Activities
    TJ30T All the status code and text
    CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
    IBIB : Installed Base/Ibase
    IBIN : Installed Base Components
    COMM_PRODUCT : Products
    CRMC_T077D : customer account groups
    CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
    CRMD_ORDERADM_H Business Transactions CRM
    CRMD_ACTIVITY_H Activity
    CRMD_OPPORT_H Opportunity
    BUTOO : Customer details
    BUT001 BP: General data II
    BUT100 BP: Roles
    BUT150 BP relationship: Attribute table (test
    different
    BUT_HIER_TREE Business Partner Group Hierarchy
    CDBC_T_PRODUCTID Mapping: Product Id
    CDBD_ORGMAN Business transaction - organizational unit -
    set
    COMC_PRODUCT General Product Settings
    COMC_R3_FIELDS Assignment of R/3 material master fields to
    CFOP
    COMM_CATEGORY Category
    COMM_CFGMAT Basic Data for Materials
    COMM_HIERARCHY Category Hierarchy
    COMP_TYPES Hierarchy Tool: Comparison Type Check
    Table
    CRMC_CPRICPROC Customer Pricing Procedures
    SMOKVBEZ15 Assignment employees to positions
    CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
    CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
    SMOFSUBTAB : Mapping & Parameters
    SMOFDSTAT : Download Monitor (R4AM1)
    SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
    SMOFOBJECT Definition of Objects for Download
    SMOFOBJPAR Parent Objects of an Object in Table
    SMOFPARSFA Middleware Parameter
    SMOFQFIND Queue Finder Table for MW-Queue finder
    SMOFTABLES Definition of Tables for Download

  • What are the delta mechanisms and tables used for  Lo Extraction & COPA

    Hi all
    what are the delta mechanisms and tables used for  Lo Extraction & COPA.
    please explain clealry.
    Thanks & Regards,
    James

    James,
    Please go through Roberto's weblog :
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    Anyways,
    As you know LO cockpit consists of different modules(MM, PP, SD, etc)
    They are called appl components. Each of them have a number (eg.MM=02) and for each appl comp they might be different Data sources and for each DS they might be different tables. So, unless you be specific we cant tell a specific table for a DS.
    coming to the delta mechanisms, there are " direct delta, queqed delta and serialized delta".
    Copa is based on the oepration concern. it can be created on " accouting based" or "costing based".
    Assign points if helpful
    Kalyan

  • What are the tables will update while loading Master data ?

    Hello Experts,
    What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects. 

    It depends upon the type of Master data u r loading....
    In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
    But the exceptional tables that get updated depending on the type of master data are.....
    If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
    If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
    If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
    If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
    NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
    NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
    NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
    All the above tables are for ATTRIBUTES
    But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
    Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
    C = Customer Defined Characteristic
    0 = Standard or SAP defined Characteristic
    * = P, Q, T, X,Y, S (depending on the above said conditions)
    Thanks & regards
    Sasidhar

  • What are the tables used for ACR & Master data daemon job?

    Hi Experts,
    What are the tables used in the backend for ACR & Master data daemon jobs. I would like to see the details of CHANGERUNMONI or ACR/Hierarchy Change run.
    Kr,
    Praveen

    Hi Praveen,
    Have you tried these tables BALHDR, BALDAT and BALOBJT for checking master date daemon delta status. It may not give you complete details. but definitely helps.. If you find any more details please do let me know..
    Thanks,
    Bharath

  • What Are the Tables in new oracle 10g express

    Hi guys,
    I am new at oracle and I just installed the Oracle 10g express. after login to the oracle by SQL Developer I noticed there are lots of tables in table folder which some of them come with $ and some not! can you please let me know what are these tables for? are they like system tables in SQL Server? if so then what are the tables under
    -->Other Users/System/Tables?
    I am lost here and I can't figure out what are the Other Users? are they like databases? I tries to google them but I couldn't find any thing
    Thanks a lot

    http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/toc.htm
    http://download.oracle.com/docs/cd/E11882_01/server.112/e17110/toc.htm
    SELECT USERNAME FROM ALL_USERS;
    USER/SCHEMA are to Oracle; what database is to SQL_Server
    Edited by: sb92075 on Apr 22, 2011 5:53 PM

  • How to see what are the Tables avialable in DataBase

    Hi ,
    Is it possible to see what are the tables avialable in the Data base (I am using Oracle 10g Client )
    Thanks in advance .

    user672373773 wrote:
    Hi ,
    Is it possible to see what are the tables avialable in the Data base (I am using Oracle 10g Client )
    Thanks in advance .Learning where to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
    Go to tahiti.oracle.com. Drill down to your product and version.
    Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
    Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
    Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there, especially the initialization parms and the data dictionary views.
    Do the same with the SQL Reference Manual.
    Do the same with the Utilities manual.
    Then set yourself a plan to dig deeper.
    - Read a chapter a day from the Concepts Manual.
    - Look in your alert log and find all the non-default initialization parms listed at instance startup. Then read up on each one of them in the Reference Manual.
    - Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
    - When you have finished reading the Concepts Manual, do it again.
    Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
    =================================

  • What are the tables/view used to Compute Dependecies Report

    Hi,
    what are the tables/views we have in APEX, which is used to create the Compute Dependecies Report
    Home -> Application xxxxx > Application Reports > Shared Components > Database Object Dependencies
    thanks,
    Deepak

    Hi Scott,
    thanks for the quick response.
    So my question is then...
    I want to create a APEX Report which will give me the following information.
    1. Application and all the Pages associated with it, which I am getting from apex_applications and
    apex_application_pages. This is OK
    2. List of all the Database Objects (Table/View) which the individual page is using, I mean relation between Page ID and database object. HOW to get that???.....(I want for each individual page, the list all the database objects (tables/views), which that page is using)
    Thanks,
    Deepak

  • What are the tables for Partner Fuction regarding the Vendors Purchasing ?

    Hello Gurus,
    What are the tables for Partner Fuction regarding the Vendors Purchasing Organisation. I need the Partner Function Key, Parner Function Name, Number and the Name of the Number.
    Thanx in advance,
    Ramona

    Hi Jürgen,
    I know that table but it is only showing me the technical name of the Partner Function and I need also the rest: the text(name), number and the number name (text). I presume there are other tables for those infos.
    I am not sure if I understand what are these. I just want the table to upload the data to BW.

  • If we open a transaction i need to find what are the tables used

    hi gurus
    can anyone suggest me
    if we open a transaction  liek va01
    i need to find what are the tables used
    what are the fields used in that transaction
    i need a list .
    thanks&regards
    kals.

    Hi
    you can find all those details in transaction variant,
    go with SHD0 ( numerical 0) and then enter your transaction code and enter transaction variant name and then select that
    Select the program SAPMV45A and go CHANGE WITH PROCESSING (F6),
    there you can find the list of fields and field names.
    reward points if usful.
    thanks and regards,
    muralidhar

  • What are the tables getting updated

    Dear,
    can anybady tell me the what are the table getting updating while doing J1IEX (CAPTURE AND POST). like RG23A, RG23C,RG1,PLA.......
    THANKS
    MRS

    Thanks Ravi,
    Can u help me some more input like how to see the RG23A value and RG23C,PLA.
    what Is the any t code to the know the status?
    Thanks
    mrs

  • What are the tables  related to Goods receipt details

    Hi,
    Please tell me the GR related data base tables.
    What are the tables  related to Goods receipt details
    Regards,
    Sunil Kumar.T
    Edited by: sunil kumar on Apr 28, 2008 8:49 AM

    Hi,
    If you want to know tables which are related to transaction.
    Use recording through SHDB tcode.
    go to shdb tcode
    after enter name of your zname.
    after for which transaction you are doing recording enter that tcode here migo.
    after press start recording.
    then enter data into fields after at last save and back.
    then it goew to control recording session screen
    after press program for create.
    then enter attributes ,select source code after save your code.
    Using this tables and which fieldsa you are using for perticular requirement.
    this is an easy procedure to know tables and fields.
    or
    USE ST05 tcode by entering single filed into application.
    These two approaches are usefull but go to first one if you knew which data you have to entered.
    Otherwise go to st05.
    *Reward points
    for goods receipt tcode by entering data

  • What are the surrogate key and row_number( )

    what are the surrogate key and row_number( ) function, and why do not we always make the row_number a primary key in the table.

    Mohannad,
    we just try to safe your efforts and to prevent common
    mistakes you can make.
    Look here.
    Your requirement is to avoid gaps in sequence.
    OK. But it means you HAVE to lock your sequence
    exclusively until you commit transaction.
    Also, it means you have to rollback sequence
    number to original value if you rollback you
    entire transaction.
    SQL> create table my_tab (id number);
    &nbsp
    Table created.
    &nbsp
    SQL> create table numer_tab (id number);
    &nbsp
    Table created.
    &nbsp
    SQL> insert into numer_tab values(0);
    &nbsp
    1 row created.
    &nbsp
    SQL>  create or replace trigger
      2   tr_no_gap
      3   before insert on my_tab
      4   for each row
      5   begin
      6    /* Let's lock sequence in exclusive mode */
      7    update numer_tab set id = id + 1
      8    returning id into :new.id;
      9   end;
    10  /
    &nbsp
    Trigger created.Now I havn't to worry about gaps:
    Fisrt session:
    SQL> insert into my_tab values(null);
    &nbsp
    1 row created.because my next session is waiting:
    SQL> insert into my_tab values(null);
    &nbspI do commit in first and second session -everything is OK:
    SQL> commit;
    &nbsp
    Commit complete.
    &nbsp
    SQL> select * from my_tab;
    &nbsp
            ID
             2
             1Now I do the same but do rollback in 1th:
    SQL> insert into my_tab values(null);
    &nbsp
    1 row created.
    &nbsp
    SQL> rollback;
    &nbsp
    Rollback complete.and commit in 2th:
    SQL> insert into my_tab values(null);
    &nbsp
    1 row created.
    &nbsp
    SQL> commit;
    &nbsp
    Commit complete.No gaps:
    SQL> select * from my_tab;
    &nbsp
            ID
             2
             3
             1Now I will not lock sequence resource due a transaction:
    SQL>  create or replace trigger
      2   tr_no_gap
      3   before insert on my_tab
      4   for each row
      5   declare
      6    pragma autonomous_transaction;
      7   begin
      8    /* Let's lock sequence in exclusive mode */
      9    update numer_tab set id = id + 1
    10    returning id into :new.id;
    11    commit;
    12   end;
    13  /
    &nbsp
    Trigger created.And I repeate my last operation.
    Both inserts execute immediately
    1th
    SQL> insert into my_tab values(null);
    &nbsp
    1 row created.2th
    SQL> insert into my_tab values(null);
    &nbsp
    1 row created.Now I rollback the first and commit the second.
    And what I see is the gap:
    SQL> select * from my_tab;
    &nbsp
            ID
             2
             3
             5
             1We are just trying to explain what you will have to
    pay the serious price of performance in the
    absence of gaps and you will have the lack
    of Oracle multithreading advantage in this case.
    I doubt your customers will happy with that.
    Rgds.

Maybe you are looking for

  • DVD drive not recognising DVD's

    Hi, I've a fairly basic iMac G4 which had a standard drive CD-RW fitted. I've swapped this for a CD/DVD drive out of another redundant iMac but cannot get it to recognise DVD's. It spins up & mounts CD's fine. I've done a system re-install (10.3.x as

  • Split of delivery notes

    Hello forum, for a customer project there is a requirement, that there is no need for a separate delivery note if the plant calender currency of the order payment term are different. Is it useful to suppress those criteria and where I have to do it?

  • Found solution to Snow Leopard issues...

    Got tired of Snow Leopard slowness/bugginess. Downgraded my Mac Mini to Leopard - whew! Movies work fine again in Front Row, and the system no longer freezes, and no more annoying like **** Quicktime X, which keeps popping up when opening movies, eve

  • SunMC Console on a Mac?

    Hi there, Just wondering, did anybody try running the Console on a Mac with OSX? I'd love to be able to monitor the network with my Mac ;-) Regards, Emerald

  • Is there a fix for the wifi issue with 5.01 yet?

    After my g3 installed the 5.01 lollipop there is lag in app selection and web and email speeds are worse that dial up now. what can be done that works?