What are the user exits available related to Credit Management?

What are the user exits available related to Credit Management?
<b>I have blocked users from releasing SO through Tciode VKM3 , now I want to block
the same (releasing of SO through VKM4) ,I want VKM4 to be used only for releasing delivery orders. Can anyone help me in configuring the same?.</b>
Thanx in advance,
Regrds,
Binayak

Hi,
User Exits For Credit Checks And Risk Management
Credit Check
If you want to carry out your own individual credit checks, that differ from those in the standard system, you must define them in the following user exits:
LVKMPTZZ
LVKMPFZ1: USER_CREDIT_CHECK1
LVKMPFZ2: USER_CREDIT_CHECK2
LVKMPFZ3: USER_CREDIT_CHECK3
User exit for availability check
User exit USEREXIT_AVAIL_CHECK_CREDIT exists in Include MV45AFZF.
This user exit allows you to determine whether the system should or should not carry out an availability check after a blocked document has been released or after a new credit check.
Risk Management for Receivables
RVKMPUS2
Using this user exit, you can define new forms of payment guarantee.
Regards,
Amrish Purohit

Similar Messages

  • What are the User Exit Available after saving a Billing Documents

    Hi,
    What are the User Exit Available after saving a Billing Documents
    Regrds,
    Binayak

    Hi
    Check the following Exits for VF01 Tcode
    V61A0001                                Customer enhancement: Pricing
    V60P0001                                Data provision for additional fields for display in lists
    V60A0001                                Customer functions in the billing document
    V05N0001                                User Exits for Printing Billing Docs. using POR Procedure
    V05I0001                                User exits for billing index
    SDVFX011                                Userexit for the komkcv- and kompcv-structures
    SDVFX010                                User exit item table for the customer lines
    SDVFX009                                Billing doc. processing KIDONO (payment reference number)
    SDVFX008                                User exit: Processing of transfer structures SD-FI
    SDVFX007                                User exit: Billing plan during transfer to Accounting
    SDVFX006                                User exit tax line in transfer to accounting
    SDVFX005                                User exit reserves in transfer to accounting
    SDVFX004                                User exit G/L line in transfer to accounting
    SDVFX003                                User exit cash clearing in transfer to accounting
    SDVFX002                                User exit for A/R line in transfer to accounting
    SDVFX001                                User exit header line in delivery to accounting
    Business Add-in
    SD_CIN_LV60AU02                         BADI for billing
    VOR_WA_FAKTURA                          Billing before Goods Issue
    Reward points if useful
    Regards
    Anji

  • What are the User Exits for Sales Order creation process?

    Hi,
    what are the User Exits for Sales Order creation process? how can I find them?
    thanks in advance,
    will reward,
    Mindaugas

    Please check this info:
    User Exits In Sales Document Processing
    This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
    Involved program components
    System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
    MV45ATZZ
    For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
    MV45AOZZ
    For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
    MV45AIZZ
    For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
    MV45AFZZ and MV45EFZ1
    For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
    User exits in the program MV45AFZZ
    The user exits which you can use for modifications in sales document processing are listed below.
    USEREXIT_DELETE_DOCUMENT
    This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
    For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
    The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
    USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields.
    To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
    The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains 'LOO' for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
    This FORM routine is called up by the module FELDAUSWAHL.
    See the Screen Painter manual for further information on structuring the interface.
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    USEREXIT_NUMBER_RANGE
    Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
    The user exit is called up in the FORM routine BELEG_SICHERN.
    USEREXIT_PRICING_PREPARE_TKOMK
    Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
    USEREXIT_PRICING_PREPARE_TKOMP
    Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
    USEREXIT_READ_DOCUMENT
    You use this user exit if further additional tables are to be read when importing TA01 or TA02.
    The user exit is called up at the end of the FORM routine BELEG_LESEN.
    USEREXIT_SAVE_DOCUMENT
    Use this user exit to fill user-specific statistics update tables.
    The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
    Note
    If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    User exits in the program MV45AFZA
    USEREXIT_MOVE_FIELD_TO_KOMKD
    Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMPD
    Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMKG
    Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_MOVE_FIELD_TO_KOMPG
    Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_REFRESH_DOCUMENT
    With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
    For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
    The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
    The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
    User-Exits in program MV45AFZB
    USEREXIT_CHECK_XVBAP_FOR_DELET
    In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
    USEREXIT_CHECK_XVBEP_FOR_DELET
    In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
    USEREXIT_CHECK_VBAK
    This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
    USEREXIT_CHECK_VBAP
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    USEREXIT_CHECK_VBKD
    The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
    USEREXIT_CHECK_VBEP
    This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
    USEREXIT_CHECK_VBSN
    You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
    USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
    USEREXIT_FILL_VBAP_FROM_HVBAP
    You can use this user exit to fill additional fields in the sub-item with data from the main item.
    USEREXIT_MOVE_FIELD_TO_TVCOM_H
    You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    USEREXIT_MOVE_FIELD_TO_TVCOM_I
    You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    User-Exits for product allocation:
    The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
    USEREXIT_MOVE_FIELD_TO_COBL
    Option to include new fields in structure COBL.
    USEREXIT_COBL_RECEIVE_VBAK
    Option to assign values from the document header to the new fields.
    USEREXIT_COBL_RECEIVE_VBAP
    Option to supply values from the item to the new fields.
    USEREXIT_COBL_SEND_ITEM
    A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
    USEREXIT_COBL_SEND_HEADER
    A changed field can be copied from the structure to the header (see source text MV45AFZB)
    USEREXIT_SOURCE_DETERMINATION
    You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
    USEREXIT_MOVE_FIELD_TO_ME_REQ
    With this user exit you can include additional fields for the following fields:
    EBAN (purchase requisition)
    EBKN (purchase requisition-account assignment)
    USEREXIT_GET_FIELD_FROM_SDCOM
    Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
    USEREXIT_MOVE_WORKAREA_TO_SDWA
    You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
    User-Exits for first data transfer:
    The following user exits can only be used for the first data transfer.
    Note
    Only use the user exits if the names/fields do NOT have the same name.
    USEREXIT_MOVE_FIELD_TO_VBAKKOM
    Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
    USEREXIT_MOVE_FIELD_TO_VBAPKOM
    Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
    USEREXIT_MOVE_FIELD_TO_VBEPKOM
    Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
    USEREXIT_MOVE_FIELD_TO_VBSN
    You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
    USEREXIT_MOVE_FIELD_TO_KOMKH
    You can use this user exit to include new fields for batch determination (document header).
    USEREXIT_MOVE_FIELD_TO_KOMPH
    You can use this user exit to include new fields for batch determination (document item).
    USEREXIT_CUST_MATERIAL_READ
    You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
    USEREXIT_NEW_PRICING_VBAP
    Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
    USEREXIT_NEW_PRICING_VBKD
    Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
    User-Exits in Program MV45AFZD
    USEREXIT_CONFIG_DATE_EXPLOSION
    The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
    User exits in the program FV45EFZ1
    USEREXIT_CHANGE_SALES_ORDER
    In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
    If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
    User-Exits in Program RV45PFZA
    USEREXIT_SET_STATUS_VBUK
    In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
    The following workareas are available for this user exit:
    VBUK (header status)
    FXVBUP (item status)
    FXVBUV (Incompletion)
    USEREXIT_SET_STATUS_VBUP
    In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
    The following workareas are available for this user exit:
    FXVBAP (Item data)
    FXVBAPF (Dynamic part of order item flow)
    FXVBUV (Incompletion)
    USEREXIT_STATUS_VBUK_INVOICE
    You can use this user exit to influence billing status at header level.
    User exits in the screens
    Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
    Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
    For field transports, you do not have to make changes or adjustments.
    Example
    A new field, VBAK-ZZKUN, should be included in table VBAK.
    If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
    User Exits in Program MV45AFZ4
    USEREXIT_MOVE_FIELD_TO_KOMK
    You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
    USEREXIT_MOVE_FIELD_TO_KOMP
    You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
    User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
    EXIT_SAPFV45P_001
    You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
    Regards
    Eswar

  • What are the user-exits which will trigger on saving Sales Order

    Hello Experts!!!
    I am working on Sales Order VA01. The requirement is I need to pre populate Sold-to-Party field. I find out user-exit (V45A0002  Predefine sold-to party in sales document  ). So it is working fine.
    Now second requirement is I need to capture all the date once user saves Sales Order. Also the time or Sales Order creation I have to make u2018GRAYu2019 some of the fields so user cannot change the value. Can anybody tell me which user-exits should I use to retrieve the entire information user entered and lock fields in Sales Order screen?
    Thanks a lot on advance.

    Hi
    U can't find it there,because it's a include, not enanchement.
    So u need to use the trx SE38, not CMOD.
    For sales ored there aren't the enanchements, but only some FORMs defined in particular includes.
    U need to get the access key by OSS in order to change them.
    These are the rest of the includes where u can find other exits:
           INCLUDE MV45ATZZ.            " Data definitions in MV45ATOP
             INCLUDE MV45AOZZ.             " User-modules PBO
             INCLUDE MV45AIZZ.             " User-modules PAI
             INCLUDE MV45AFZA.             " User-forms < 3.0
             INCLUDE MV45AFZB.             " User-forms
             INCLUDE MV45AFZC.             " User-forms < 3.0D
             INCLUDE MV45AFZD.             " User-forms   3.0E
             INCLUDE MV45AFZF.             " User-forms   3.0F
           include mv45afzg.             " User-forms   3.1G
             INCLUDE MV45AFZH.             " User-forms   4.6B
             INCLUDE MV45AFZZ.             " User-forms
             INCLUDE MV45AFZ4.             " User-forms   4.0
    Anyway u can find some information about these exit in customizing (trx SPRO):
    Sales and Distributions->System modifications->User exits
    Max

  • How can we identify what are all user exits are there for sales orders,deli

    Dear All,
    How can we identify what are all user exits are there for sales orders,deliverys and invoices
    thanks
    nitchel v

    Hi Nitchel
    There are many ways to find out the user exits..
    For example for VA01.
    Goto Transaction ie VA01:
    goto System-- Status
    doubleclick on the program name ie SAPMV45A
    SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
    get the package name from here ie VA
    note the package(VA) and get back to main screen
    goto SMOD tcode  and click on find button in the package spec giv the package name ie VA and execute it
    you will find list of exits available
    check out the exit that suits ur requirement
    goto cmod and create a new project and implement in that user exit.
    You will get the following exits in SMOD..
    SDTRM001  Reschedule schedule lines without a new ATP check
    V45A0001  Determine alternative materials for product selection
    V45A0002  Predefine sold-to party in sales document
    V45A0003  Collector for customer function modulpool MV45A
    V45A0004  Copy packing proposal
    V45E0001  Update the purchase order from the sales order
    V45E0002  Data transfer in procurement elements (PRreq., assembly
    V45L0001  SD component supplier processing (customer enhancements
    V45P0001  SD customer function for cross-company code sales
    V45S0001  Update sales document from configuration
    V45S0003  MRP-relevance for incomplete configuration
    V45S0004  Effectivity type in sales order
    V45W0001  SD Service Management: Forward Contract Data to Item
    V46H0001  SD Customer functions for resource-related billing
    V60F0001  SD Billing plan (customer enhancement) diff. to billing
    For Delivery you will get .. here the package name will be VL.
    V02V0001  Sales area determination for stock transport order
    V02V0002  User exit for storage location determination
    V02V0003  User exit for gate + matl staging area determination (h
    V02V0004  User Exit for Staging Area Determination (Item)
    V50PSTAT  Delivery: Item Status Calculation
    V50Q0001  Delivery Monitor: User Exits for Filling Display Fields
    V50R0001  Collective processing for delivery creation
    V50R0002  Collective processing for delivery creation
    V50R0004  Calculation of Stock for POs for Shipping Due Date List
    V50S0001  User Exits for Delivery Processing
    V53C0001  Rough workload calculation in time per item
    V53C0002  W&S: RWE enhancement - shipping material type/time slot
    V53W0001  User exits for creating picking waves
    VMDE0001  Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002  Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003  Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004  Shipping Interface: Message SDPACK (Packing, Inbound)
    For Billing VF01..Package is VF..
    SDVFX007  User exit: Billing plan during transfer to Accounting
    SDVFX008  User exit: Processing of transfer structures SD-FI
    SDVFX009  Billing doc. processing KIDONO (payment reference numbe
    SDVFX010  User exit item table for the customer lines
    SDVFX011  Userexit for the komkcv- and kompcv-structures
    V05I0001  User exits for billing index
    V05N0001  User Exits for Printing Billing Docs. using POR Procedu
    V60A0001  Customer functions in the billing document
    V60P0001  Data provision for additional fields for display in lis
    V61A0001  Customer enhancement: Pricing
    Or another way is ..
    - Get the program name for that T-Code
    - Go to that program
    - In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
    And also you can check in the tables in SE16 for user exits..
    MODSAP - Stores SAP Enhancements
    MODSAPT - Stores SAP Enhancements - Short Texts
    MODACT - Stores Modifications
    And there are other ways as well , pls check the forum for this ,
    Regards,
    Vvieks
    Note : If you have any specific requirement then pls let us know , we will guide you

  • What are the standard Solutions available for Complaints Management in CRM?

    Dear all,
    What are the standard solutions available in SAP CRM to receive and process complaints through Customer Interaction Center.
    Our requirement is to receive and register complaints from contact center and process them by integrating back end ECC and BIW systems.
    As per my understanding we can not integrate ECC transactions in CASE Management while CASES are being created through Interaction Center.
    Please help me to map the following requirement successfully into SAP.
    How to register the complaint through Interaction Center?
    How this complaint information is communicated in back end ECC system?
    How to track the status and solution of the complaint available in back end ECC system?
    How the complaints are stored in ECC system?
    After creation of a complaint, can we trigger an automatic email on back end ECC system user with all complaint relevant data?
    Kindly help me to understand the process.
    Best regards,
    Raghu ram.

    You can analyse this [link |http://help.sap.com/saphelp_crm60/helpdata/en/68/691976cd2ef845a4e62437a82b67df/frameset.htm]for more information. Additionaly the tree hierarchy links contain some process flows where it explains you briefly the big picture of the process, in standard SAP CRM Complaint Manaagement Scenario.
    BR,
    Cenk Sezgin

  • Any report to see what are the users assigned to an org-unit ?

    Hi All,
    Is there any standard report available to see what are the users assigned to a particular org-unit?
    I'm looking for complete list of users assigned to a particular org-unit both directly and indirectly/
    Thank you so much in advance !!
    Cheers,
    Gyan.

    Hi,
    None of them actually helped.
    Trx PC00 is not available in 4.0 sytem. And from the table mentioned i don't see the org-unit value. Could you please elaborate on this.
    Thanks,
    Gyan.

  • What is the user exit triggering at this time of saving delivery document

    Hi All,
    What is the user exit triggering at this time of saving delivery document
    regards
    Deekshitha.

    For the Delivery process following project are used, you can list out all exit
    V02V0001
    V02V0002
    V02V0003
    V02V0004
    V50PSTAT
    V50Q0001
    V50R0001
    V50R0002
    V50R0004
    V50S0001
    V53C0001
    V53C0002
    V53W0001
    VMDE0001
    VMDE0002
    VMDE0003
    VMDE0004

  • What are the user defind functions

    hi all,
    what are the user defind functions.
    Regards,
    priya

    Hi Priya,
    Generally we will complete our mapping things with the help of Standard Functions itself those are available in Graphical Mapping.
    UDF are used when the mappings are unable to complete with these standard functions then we need to write small piece of Java code and can achieve that functionality.
    Steps to UDF
    Activities
    1. To create a new user-defined function, in the data-flow editor, choose Create New Function (This
    graphic is explained in the accompanying text), which is located on the lower left-hand side of the
    screen. In the menu, choose Simple Function or Advanced Function.
    2. In the window that appears, specify the attributes of the new function:
    Name
    Technical name of the function. The name is displayed in the function chooser and on the data-flow
    object.
    Description
    Description of how the function is used.
    Cache
    Function type (see above)
    Argument Count
    In this table, you specify the number of input values the function can process, and name them. All
    functions are of type String.
    3. In the window that appears, you can create Java source code:
    a. You can import Java packages to your methods from the Imports input field, by specifying them
    separated by a comma or semi-colon:
    You do not need to import the packages java.lang., java.util., java.io., and java.lang.reflect. since
    all message mappings require these packages and therefore import them. You should be able to
    access standard JDK and J2EE packages of the SAP Web Application Server by simply specifying the
    package under Import. In other words, you do not have to import it as an archive into the Integration
    Repository. You can also access classes of the SAP XML Toolkit, the SAP Java Connector, and the
    SAP Logging Service (see also: Runtime Environment (Java-Mappings)).
    In addition to the standard packages, you can also specify Java packages that you have imported as
    archives and that are located in the same, or in an underlying software component version as the
    message mapping.
    b. Create your Java source text in the editor window or copy source text from another editor.
    4. Confirm with Save and Close.
    5. User-defined functions are limited to the message mapping in which you created the function. To
    save the new function, save the message mapping.
    6. To test the function, use the test environment.
    The new function is now visible in the User-Defined function category. When you select this category,
    a corresponding button is displayed in the function chooser pushbutton bar. To edit, delete, or add the
    function to the data-flow editor, choose the arrow next to the button and select from the list box
    displayed.
    REgards
    Seshagiri

  • What are the ODM components available in SNC?

    Hi experts,
    Could you please explain on
    1. what are the ODM components available with SNC an their use?
    2. Settings that required to activate/generate/regenerate ODM?
    Thanks in advance and eagerly looking for your great words.
    Regards
    Vinoth

    Hi Rohan
    The following are the order components available with SNC
    1HDR,1KNB,1NOT,1PAC,1PRA,1PRC,1PRT,1SCN 1SUB 1PRT 1SCN 1SUB 1TST 2IT2 2IT3 2NOT 2PRA 4NOT 4SDL 4TST 7MP1 7MP2 7MP3 7REF 7RQT BWHG BWIG BWLG DLH1 DLI1 DLI2 DLI3 DLI4 DLI5 DLI6 DLI8 DRIT DRSL FTD1 FTDH FTU1 FTUH HEXC HHU1 HHU2 HHU3 HHU4 HMSG HPRT HSTT HTRA ICAR IEXC IPRD ISTO ISTT IVH1 IVI1 IVI2 KNBR OECN OECP OEHD OEIL OEIR
    OEIT OESL PIHD PIND  PIOR RWAA RWAT RWCG  RWCP RWDS RWFA  RWGN RWHN RWIB RWIN RWIR RWIV RWLC RWNS RWOH RWOI RWOP RWP1 RWP2  RWPA RWPG RWPH RWPN RWPP RWPR  RWPV RWPW  RWRC RWRS  RWSN RWTS  SCNR
    TLBH
    Depending on the data you exchange between the two systems, you need to activate the necessary components.
    These components form the basic framework where the data in your order document gets stored in the respective components
    For example:A double-level order document, use the components 1HDR (header) and 2IT2 (item). For a triple-level order document, use 1HDR (header), 2IT3 (item) and 4SDL (schedule line).
    As mentioned by Nikhil and Sandeep, the above notes help you, in activating the necessary ODM's
    Kindly read the help document available is SAP IMG for further understanding.
    Best Regards
    Vinod

  • What is the user exit for automatic account determination in PO

    Hi Experts
       I ned to know  what is the user exit for automatic account determination in PO
    my client needs the document type to defines Account Assignment Category.
    choosen a document type Account Assignment Category is defined automatically.  you can't choose
    a wrong  Account Assignment Category from the drop down list.
    thanks form you help.

    If this is the case than why don't you use the Transaction variant
    SHD0: http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
    If you have knowledge of Transaction variant then you can use SHD0 tcode and generate the transaction using default type and give that transaction to user instead of ME21N so they will not have the issue.
    The exact solution for your problem is as follows
    Go to Tcode SHD0 and enter the transaction variant
    In T code field enter ME21N and then enter the ZXXXX or the name you want to keep in transaction variant field and hit create button
    This will take you to ME21N transaction and here you just enter the data but make sure you enter the A/c which you want to default.
    Once you finish system will save this one as a variant
    Every time you hit or enter the pop up screen comes here you just hit enter and whichever data you want to default that you have to select in the Popup by checking the Box
    W content and output only for your case the field XXXXXXXX should be selected for W content and output only
    Make sure you have value 1 in contents field
    If not then restart the variant again and on the ME21Nscreen reselect the invoice field
    Later exit and save (save in the object which you can transport)
    Then from SHD0 transaction select GOTO create variant transaction and here you careate the tcode and use that tcode for ME21N (e.g ZTRAN - For specifix sto)

  • I have a Win7Pro SP1 PC locked down with a Group Policy as it is a public facing PC. PDF fillable forms cannot be completed when logged on as the restricted user. The forms work as a normal user. What are the user requirements/permissions needed to fill f

    I have a Win7Pro SP1 PC locked down with a Group Policy as it is a public facing PC. PDF fillable forms cannot be completed when logged on as the restricted user. The forms work as a normal user. What are the user requirements/permissions needed to fill forms?

    Well, try this (I was able to fix my with these steps):
    Go Utilities > Disk Utility
    Select your Startup Disk, e.g. Macintosh HD
    Then, under the First Aid Tab, click Verify Disk Permissions.
    If there are errors, then click repair Disk Permissions.
    After it is done, restart the computer and see if your problem is resolved.
    I hope this help.
    Zeke
    www.ZekeYuen.com/blog/

  • What are the proposal options available?

    What are the proposal options available?

    Hi,
    please use meaningful subjects as well as  well explained questions. See also the rules of engagement.
    kind regards
    Siggi

  • For Delivery Performance what are the standard report available n SAP?

    For Delivery Performance what are the standard report available n SAP?

    hi
    If you wanna know the SD report just go to SAP1 transaction code from easy access( it works only from easy access) and you will find entire reports available in SAP. Then select what is relevant to you. And as you asked any material on reports, so I have some good material on it and will surely send you tonight.
    And Some of the Standard reports in SD are given below check it out for convenient however always better to chek above told transaction code:
    Sales summary - VC/2
    Display Customer Hierarchy - VDH2
    Display Condition record report - V/I6
    Pricing Report - V/LD
    Create Net Price List - V_NL
    List customer material info - VD59
    List of sales order - VA05
    List of Billing documents - VF05
    Inquiries list - VA15
    Quotation List - VA25
    Incomplete Sales orders - V.02
    Backorders - V.15
    Outbound Delivery Monitor - VL06o
    Incomplete delivery - V_UC
    Customer Returns-Analysis - MC+A
    Customer Analysis- Sales - MC+E
    Customer Analysis- Cr. Memo - MC+I
    Deliveries-Due list - VL04
    Billing due list - VF04
    Incomplete Billing documents - MCV9
    Customer Analysis-Basic List - MCTA
    Material Analysis(SIS) - MCTC
    Sales org analysis - MCTE
    Sales org analysis-Invoiced sales - MC+2
    Material Analysis-Incoming orders - MC(E
    General- List of Outbound deliveries - VL06f
    Material Returns-Analysis - MC+M
    Material Analysis- Invoiced Sales - MC+Q
    Variant configuration Analysis - MC(B
    Sales org analysis-Incoming orders - MC(I
    Sales org analysis-Returns - MC+Y
    Sales office Analysis- Invoiced Sales - MC-E
    Sales office Analysis- Returns - MC-A
    Shipping point Analysis - MC(U
    Shipping point Analysis-Returns - MC-O
    Blocked orders - V.14
    Order Within time period - SD01
    Duplicate Sales orders in period - SDD1
    Display Delivery Changes - VL22
    These are all main standard reports as well I am again repeating that it's better to check all reports from above said transaction code.

  • What are the prerequsite for installing and Configure  Knowledge management

    Hi All,
    what are the prerequsite for installing and Configure  Knowledge management in CE 7.1 eph1.
    Thanks
    AB

    Hi Michael,
    Thanks for yor quick response.......Can you please tell me whats the alternative for KMC in CE 7.1 in portal
    thanks
    AB

Maybe you are looking for

  • IOS 7.0.2 sound settings being ignored

    I have an iPhone 4s and I just updated to iOS 7.0.2 (11A501). When I try to change the sound bytes for my notifications, the phone is still using the old settings from before I did the change. I've tried restarting the device, and the problem still p

  • Setup needed for ACH payments to the Employee and Supplier

    Hi, I am looking for a document to know the setup steps needed for ACH payment to the Employees and the Suppliers. Can anybody give me a detailed document on that or let me know where I will find one? Thanks, Arun Edited by: 834011 on Feb 4, 2011 3:5

  • Additional component needed

    I downloaded a movie file (.avi) and the video plays fine in quicktime, however, the audio is not playing. It said that I need and additional quicktime component that mine does not have. What component do I need to download?

  • How to install the iCloud copy?

    just got a new iPhone so I did a iCloud copi of my old, and hen I wanted to start the new with my iCloud copi, I says the phone has to be updated with iOS 8.2. How do I get my iCloud copy on the new phone, because the only way to get the 8.2 I to sta

  • Help! Can I recover an image from Bridge's Cache?

    Nightmare situation. Deleted clients 3 month old baby files by accident. Recovery software found files but they are corrupted, all of them.... SO I know I showed them to her originally in Bridge CS3 and that bridge makes a high-res preview. This prev