What are the uses for Macbook pro and Macbook air?

Hi! I am deciding between MBA and MBP and need to know what the different uses for each one was. Like what would you use the MBA for and what would you use the MBP for?? All opinions welcome!!

They're actually pretty comparible in what they can do if you're talking about the base model of both (say 13") with 4GB RAM. At that level, the Pro has the advantage if you're going to watch or burn DVD's or CD's, as the Air has no optical drive. But otherwise, they're pretty much the same--full-sized, backlit keyboard, camera, beautiful screen, etc. If you're going for more than a basic 13" Pro, then things start to change. For example, you can get up to 8GB RAM on the Pro, and a huge hard drive, you can also get a 15" or 17" size. You will be paying a lot for these, but, obviously, if you're going to be working on, say, making videos (which you may then want burn onto disk) the Pro is very much what you'll want.
However, if you don't need or want any of that--if, for example, you plan to do the usual programs (word processing, games, web surfing, music, etc.), then you really won't see much difference between the two. At 4GB RAM and a 13" screen, the big difference is going to be thickness and weight, not power. And in this the Air will have the advantage--it's really amazingly slim, light and with a SSD, faster (you pay extra--a lot extra--to get SSD on the Pro).
Just to make the point, I switched from a 13" Pro to an 11" Air. My hard drive size is half what it was with a Pro, but I was barely taking up half of that amount on the Pro, and so have plenty of room on my 128GB Air (you can get 256GB for the 11" if you order it online). Absolutely everything my Pro did, my Air does (sans optical drive), only faster and lighter and more compact--meaning it takes up less table space, slips in and out of my bag faster, balances on my lap easier, etc. But there was no interruption of service--I switched pretyt seamlessly from 13" Pro to 11" Air.
The Pro offers you more options for power, screen size, HD size and optical drive. But it's really pretty surprising how few of us need that much power, that much room, or the optical drive. It's very freeing to realize that less can be more than enough.

Similar Messages

What are the uses of MVC, Extension and how to create it for begineers pls

what are the uses of MVC, Extension and how to create it for begineers pls
dont give link for tutorials please explain ,
thank you,
Regards,
Jagrut BahratKumar Shukla

Hi,
Check out this link :
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm</a>
It is the best possible explanation and documentation that you'll get.
Thanks,
Tatvagna.

What is the use for lock object and how to use the lock objects

Hi Guru's,
I am new to ABAP .Can you please clarify the that what is the use of lock object and how to use the loct object .what is use of the Deque & Enque function modules .

hi ,
below are some minfo about lock objects :
Lock Objects
These types of objects are used for locking the access to database records in table. This mechanism is used to enforce data integrity that is two users cannot update the same data at the same time. With lock objects you can lock table-field or whole table.
In a system where many users can access the same data, it becomes necessary to control the access to the data. In R/3 system this access control is built-in on database tables. Developers can also lock objects over table records.
To lock an object you need to call standard functions, which are automatically generated while defining the lock object in ABAP/4 dictionary. This locking system is independent of the locking mechanism used by the R/3 system. This mechanism also defines LUW i.e. Logical Unit of Work. Whenever an object is locked, either by in built locking mechanism or by function modules, it creates corresponding entry in global system table i.e. table is locked. The system automatically releases the lock at the end of transaction. The LUW starts when a lock entry is created in the system table and ends when the lock is released.
Creating Lock Objects
Lock object is an aggregated dictionary object and can be defined by using the following steps:
o From initial data dictionary screen, enter the name for the object, Click Lock object radiobutton and then click on Create. The system displays a dialog box for Maintain Lock Objects screen
o Enter short text as usual and the name for primary table.
-Save
-Select Tables option
From this screen you can:
Select secondary tables, if any, linked by foreign key relationship.
Fields for the lock objects. This option allows you to select fields for objects (R/3 system allows locking up to record level). Lock object argument are not selected by user but are imposed by the system and includes all the primary keys for the table.
1) Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
2) Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
3) Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
Also, last but not the least, locking the object is logical (locking with any enqueue ) .so, you have to use the lock object while trying to access from second program .
reward if helpful ,
Regards,
Ranjita

What are the settings for apn data and mms for iphone 4 on straight talk?

what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

Package question - what are the uses for /var/sadm/pkg ?

I'm writing packages and noticed once a packages is installed using pkgadd, that files and dirs are created in the /var/sadm/pkg directory. I'm specificly intereseted in the pkginfo file - it contains all the variables from my request script and their values. My question is what are all the uses for this file?
I've noticed that pkginfo reads from it but would there be any problem deleting certain lines from that file (lines not used by pkginfo - just variables used in the request script that I'd really rather not have floating around in a publicly accessable file).
thanks!
Bob

I'm refering specificly to the file "/var/sadm/pkg/<pkgName>/pkginfo" - it's created during pkgadd and contains all the variable-value pairs from the packages pkginfo file as well as any variables used in the request script and copied to it's temporary response file. I'm not refering to the pkginfo file that you create as a package infofile component.
I want to remove, from the /var/sadm/pkg/<pkgName>/pkginfo file, certain var-value pairs that were used in my request scripts (not part of the InfoFile/pkginfo component). Otherwise, any user can look at this file or run 'pkgparam <pkgName>' and get that sensative info.
To the best of my knowledge, this file is only used by the commands pkgparam and pkginfo. Are there other uses?
My worries are:
-is it OK to remove lines manually during the postinstall script?
-will doing this cause problems with any admin or package maintenance functions?
Thanks-
Bob

What are the settings for iPhone, iPad and iMac to sync ical and contacts?

How can I get all three items to sync? What are the settings on the iMac with Lion on board? I put all my stuff on iphone but iMac & iPad do not have the items synced even though I have everything on icloud?

They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

What are the uses of table control and tabstrip control

can anyone tell me the uses of table control and tabstrip control

Hi,
table control is more comfortable for customizing.scroll bars all possible in this.where as it is not possible in step loops.
check this example.
PROGRAM ZBHTCTRL.
TABLES: LFA1, EKKO.
DATA: OKCODE1 LIKE SY-UCOMM,
OKCODE2 LIKE SY-UCOMM.
CONTROLS TABC TYPE TABLEVIEW USING SCREEN 1001.
DATA: BEGIN OF ITAB OCCURS 0,
MANDT LIKE EKKO-MANDT,
EBELN LIKE EKKO-EBELN,
BSTYP LIKE EKKO-BSTYP,
BSART LIKE EKKO-BSART,
END OF ITAB.
MODULE USER_COMMAND_1000 INPUT.
CASE OKCODE1.
WHEN 'BACK'.
SET SCREEN 0.
WHEN 'NEXT'.
SET SCREEN 1001.
SELECT * FROM EKKO INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE
LIFNR = LFA1-LIFNR.
ENDCASE.
ENDMODULE. " USER_COMMAND_1001 INPUT
MODULE MOVE_DATA OUTPUT.
EKKO-MANDT = ITAB-MANDT.
EKKO-EBELN = ITAB-EBELN.
EKKO-BSTYP = ITAB-BSTYP.
EKKO-BSART = ITAB-BSART.
ENDMODULE. " MOVE_DATA OUTPUT
MODULE USER_COMMAND_1001 INPUT.
CASE OKCODE2.
WHEN 'BACK'.
SET SCREEN 1000.
ENDCASE.
ENDMODULE. " USER_COMMAND_1001 OUTPUT
MODULE STATUS_1001 OUTPUT.
SET PF-STATUS 'MENU'.
SET TITLEBAR 'TIT'.
ENDMODULE. " STATUS_1001 OUTPUT
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS 'DMENU'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_1000 OUTPUT
FORM ON_CTMENU_FORM1 USING CMENU TYPE REF TO CL_CTMENU.
CALL METHOD CMENU->LOAD_GUI_STATUS
EXPORTING
PROGRAM = ' ZBHTCTRL'
STATUS = 'CMENU'
MENU = CMENU.
CALL METHOD CMENU->ADD_FUNCTION
EXPORTING
FCODE = 'RX'
TEXT = 'RECIEVE'.
ENDFORM.
FLOW LOGIC:
PROCESS BEFORE OUTPUT.
MODULE STATUS_1000.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1000.
PROCESS BEFORE OUTPUT.
MODULE STATUS_1001.
LOOP AT ITAB WITH CONTROL TABC CURSOR TABC-TOP_LINE.
MODULE MOVE_DATA.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1001.
LOOP AT ITAB.
ENDLOOP.
for more info check this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac1d35c111d1829f0000e829fbfe/content.htm
thanks
Ashu.

What are the uses for AW?

I have yet to find a use for AW that excel or word or pages or keynote could not do.
So i was wondering what is the program being used for?

I agree, although I suspect anyone looking specifically at Word, Excel, and Keynote/PowerPoint are not using databases (although many do not, but are trying really hard to make excel into a databse!).
I've been using FileMaker so long, that I find AW database to be underpowered, but for the price, the database tool in AW is very good for flat databases.
When one comes to the point of needing a relational database, FileMaker can't be beat -- expecially when compared to Access on PCs,...FileMaker is far simpler and more intuitive (at least to me), and development time is very fast.
Barbara's example is one where I bet a relational database would be very useful,...something to consider,...

What are the coupons for?? and where can I get cheaper .Mac membership

What are those coupons that came with the mechine for??
Not for .Mac??
where can I get cheaper ones.(I live in Canada)
Thanks

They are used for the rare promotion or upgrade offers.
The only time I've ever seen a use for them is when you purchase a computer with a previous version of the Mac OS when a newer version is already available.
You can submit one of the coupons with the upgrade form to obtain the new version at a reduced price.
That's about the only benefit I've ever seen for them.
Apple calls this program something like "Mac OS Up To Date" (something along those lines).
To illustrate, say you purchased an iMac right after OS 10.4 came out, and discovered that the iMac was packaged-up prior to OS 10.4 being available (like it sat on a shelf for a while). So, you've got OS 10.3 installed on it.
Now, you purchased a new computer, obviously you want the latest OS to go with it.
So, because you purchased a new machine with an old OS, you can use the OS Up To Date program to order upgrade disks to OS 10.4 for only $20 or $30 instead of the $129 everyone else pays.
It's not really a fair deal for a person who just purchased a new computer. But, it's better than getting stuck with paying $129.
So, you would fill out the upgrade form, and submit your coupon with it.
The same thing applies to if you purchased the system after the new version of iLife was available. You might be able to get the new version of iLife at a reduced price.
Apple usually runs this program for about 90 days after a new software version is available.
They used to work it the other way:
When I purchased my PowerMac G3 266-DT, they had a program that allowed you to upgrade to the new version of the Mac OS for $19 or $29 (can't remember for sure the $ amount) if it was released within 90 days of you purchasing your computer.
I took advantage of that, and got a reduced-price upgrade to OS 8.5 from OS 8.1.
That method makes more sense to me than the current method.
It makes sense to get a reduced price on updates that arrive up to 90-days from your date of purchase.
But, it is not such a good deal to have to pay for updates that were already available at the time of purchase and should have been included with your new computer. After-all, it's not your fault that the computer sat on the shelf too long.
But, that's how it works now. The coupons basically get you a discount on software updates that were shipping on new systems when you purchased your new computer that had been boxed-up before the new software was released.
As for cheaper .Mac prices, the only options I know of are:
1) You get a $30 discount on it when you purchase a new Mac. So, when you setup the Mac, you are usually presented with an option to sign-up for .Mac with a discount.
2) Amazon sometimes runs a special on it.
3) You might be able to get a .Mac retail box from someone who purchased it and then changed their mind. But, don't buy a box that has been registered already.
Be very careful buying products like .Mac second-hand. There is no way to know that they have not already used the registration code until after you receive it and try to register it yourself.
Hope this helps to answer your question.

What are you using for Fan speed AND temp monitor?

Thanks to Bosskiller, my rig seems to be running a bit stabler now! Knock on wood. Is there any program other than MSI's core center that monitor fan speed AND temp? I used to use MBM but it's no longer being supported and CoreCenter doesn't seem all that popular here?

Quote from: BOSSKILLER on 25-September-08, 00:42:40
http://www.cpuid.com/hwmonitor.php
http://www.alcpu.com/CoreTemp/
Actually how accurate is the temp reading on HWMonitor for your MSI board? One thing I noticed is that w/ Coretemeter the temp reading was around 48-50c on Rig#1 and almost 58-60c on Rig#2 (That's my HTPC w/ EXTREMELY tight spacings so still work in progress as far as cooling's concern!) but using HWMonitor I got 31c CONSISTENTLY on both rigs! I'll love to think that I'm indeed running this cool but feeling the exhaust air, I think this 31c reading is not real...

4.6C to ERP6.0 Upgrade - what are the recommendations for Unicode and Java

Hi All,
Forgive such a basic question.
We are just beginning to look at our ERP6.0 upgrade and am unclear whether we should convert to unicode at the same time, and also what are the uses for the Java stack.
Unicode?
We are a single language Latin-1 site so don't need Unicode. However will it become mandatory eventually? Are we better, if we have the opportunity now, just to convert. Also I believe the Java stack is only Unicode. Does ASCII ABAP and Java Unicode complicate things?
Java?
Will we need it? We are proposing a technical upgrade from our 4.6c Javaless environment. Where does Java come in to play in ERP6.0? Doesn't it increase greatly the iSeries HW requirements? (I'm looking at a 2 way 550 at the moment)
Look forward to hearing your views.
Regards
Steve

Hi Stephen,
at the moment, in a latin-1 environment Unicode is for old customers not a requrirement. This might change in 5-10 years ...
Java: No problem at all with ASCII (in latin-1 environments)
=> there is no need for you, but you could go for it. We did several Unicode conversions already and these Latin-1 conversions are pretty easy and simple especially on iSeries, because of the special InPlace Unicode Conversion.
... but this can be done at any time ...
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

What are the frequencies all versions of the iPhone 6 and what are they used for (e.g. GSM, 3G, LTE, WIFI, Bluetooth,etc...) provided with channel numbers per frequency

what are the frequencies all versions of the iPhone 6 and what are they used for (e.g. GSM, 3G, LTE, WIFI, Bluetooth,etc...) provided with channel numbers per frequency.

Click here

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

Hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

Legality aside (I'm not a lawyer and have no opinion on the matter) in order to make a purchase of an iPhone 5 you would need to travel to a country where they are for sale and purchase it there. Be sure to get one that is officially unlocked or you would not be able to use it with your cell carrier. Be sure that your carrier supports use of the iPhone before you buy. Also note that the warranty of the iPhone is only valid in the country of purchase.
Appe does not ship outside of the countries where it sells the phones.

What are the uses for Macbook pro and Macbook air?

Similar Messages

Maybe you are looking for