What are these values after importing raw formats?

Hello,
I am using Lightroom 5.7, and I import .nef files (Nikon D800).
I import the .nef files without any Quick Develop settings (set to 'None'). My default presets are not specific to the camera serial number, and also not specific to the camera iso setting.
However when I open the image in the 'Develop' module, some values are not set to zero: e.g. tint +25, sharpening +25.
My question is:
Has Lightroom already pre-modified the image, or is it just reading these values from the file itself?
Thanks.

Tint would have been calculated by your camera as part of the white balance calculation.
The +25 amount of sharpening is the default sharpening applied to all RAW files.

Similar Messages

  • AuthC = P, A  What are these values?

    We are implementing the compensation module and I have recieved some "odd" errors during Manager Self Service testing.  When they have to Plan or Approve certain records for their employees I show that they must have P or A in the Authc field of P_orgincon.  These values are not listed in the possible entries nor can I find any documentation on them on SAP.  While I have a pretty good idea of what they do, I do not like granting access without more understanding.
    Does anyone have documentation on these values?   Are they simply marking them as planned or approved.  Are there any side affects of these values I should be aware of?

    Hi Waldon,
    P and A seem not to be documented yet.
    Found only other values in the docu:
    [http://help.sap.com/saphelp_erp60_sp/helpdata/EN/ef/4aba3b3bf00152e10000000a114084/frameset.htm]
    I suggest to open a message at SAP to get an update of the documentation triggered. (PA-BC).
    b.rgds, Bernhard

  • Just purchased Nikon D610. tried to import 3 images and got this message: The files are not recognized by the raw format support in Lightroom. How do I fix this frustrating problem. Have been using Lightroom for years also Nikon products without any prior

    How do I import images. Have a message that says: The files are not recognized by the raw format suppot in Lightroom. Am using a Mac version 10.9.4. the import is from a new Nikon D610. Am using LR 4.4 Please help Adobe is useless as a support.

    Each camera must be supported explicity and your LR version is years older than your camera.
    According to Adobe's Camera-support page, you need at least LR 5.3 to work with your D610 NEFs in LR:
    Camera Raw plug-in | Supported cameras
    If you don't want to upgrade to LR 5, or can't due to your OS being too old, then it might work to use the latest DNG Converter and create DNGs from your NEFs, which should open in LR 4.x.  You can find the DNG Converter here:  http://www.adobe.com/downloads/updates

  • What are these imports?and how can i use them?

    import javax.microedition.lcdui.Canvas;
    import javax.microedition.lcdui.Display;
    import javax.microedition.lcdui.Form;
    import javax.microedition.lcdui.Graphics;
    import javax.microedition.lcdui.Image;
    what are these imports?

    how would i make a server applet that can be accesed by 2 specific pll or random which ever makes it easier for the time being i just want 2 ppl to have acces to one applet and have a variable like a paddle in pong under each persons controll

  • What are these processes and how do I prevent them?

    For many years, many have complained of external drives that are in standby/sleep spinning up for no apparent reason.  From the user's point of view this is unnecesssary, but to make matters worse, the system usually stops everything else while waiting for the drives.
    I have a Mac mini that I use as a home theater pc.  The media and backups are on a 5-bay enclosure (no RAID) attached by USB.  While watching a video, the unused drives will go into standby mode, which is good.  But then, with no user activity, they will spin up, freezing the video and everything else, which is not good.  As these are slow drives and spin up sequentially, this can take 10-20 seconds.  This may happen once or twice an hour, but sometimes more frequently.
    In looking into the causes, I have turned off time Machine (after putting these drives into the Privacy section for good measure).  I also prevented Spotlight and fsevents logging with the following:
    mdutil -i off /Volumes/<drive1> /Volumes/<drive2> . . .
    cd /Volumes/<drive1 and then repeat for other drives>
         rm -rf .fseventsd .Spotlight-*
         mkdir .fseventsd
         touch .fseventsd/no_log .metadata_never_index
    As far as I can tell this has worked to stop those processes from accessing the drives after they are mounted, but the problem persists.  To find out what else might be causing them to wake up:
    sudo fs_usage -w | grep -e Volumes/<drive1> -e /Volumes/<drive2> . . .
    and here is what I found last night (actually didn't use the -w last night, thus it is cut off):
    18:35:36  fsgetpath   /Volumes/XBMC         0.000026   SSDragHelper
    18:35:36  fsgetpath   /Volumes/Stuff        0.000006   SSDragHelper
    18:35:36  fsgetpath   /Volumes/DatOptic_3   0.000005   SSDragHelper
    18:35:36  fsgetpath   /Volumes/MacBackUp    0.000003   SSDragHelper
    18:36:15  fsgetpath   /Volumes/XBMC         0.000026   System Prefe
    18:36:15  fsgetpath   /Volumes/Stuff        0.000004   System Prefe
    18:36:15  fsgetpath   /Volumes/DatOptic_3   0.000003   System Prefe
    18:36:15  fsgetpath   /Volumes/MacBackUp    0.000003   System Prefe
    18:55:36  fsgetpath   /Volumes/XBMC         0.000034   GoogleSoftwa
    18:55:36  fsgetpath   /Volumes/Stuff        0.000004   GoogleSoftwa
    18:55:36  fsgetpath   /Volumes/DatOptic_3   0.000003   GoogleSoftwa
    18:55:36  fsgetpath   /Volumes/MacBackUp    0.000003   GoogleSoftwa
    After looking into the Google process, I was surprised to find the tentacles that Google puts into your system, and ripped every bit of it out that I could.  But I have no idea about what's going on with SSDragHelper and System Prefe (presumable System Preferences).  This must be OS X itself?  What are these processes doing, and is there any way to prevent them from accessing these disks in this way?

    Thanks for the reply Hen3ry.  Looks like you've done a lot of investigation.  For me, fs_usage entries accompanying spindown are not problems - I'm happy if the drives spin down.  My problem is the spinups.  But still, I don't think it is necessary to time the fs_usage entries with spinups.  If you grep for the drives you're concerned about, you will see any process that would potentially wake them up.
    Because my understanding is limited, I also am more concerned with the process/application that is accessing the drives than with the functions or commands they are sending.  And the values that are returned by those functions are way beyond what I can deal with.
    It's interesting that you've found a difference between your old and new drives.  Could you specify the enclosure and drives in each case?
    The StorageStatus app looks interesting; thanks for the tip.
    Here's a summary of what I've done so far, which I think is working.  I need a few more weeks to know for sure.
    How to prevent unwanted drive spin-ups
    If you are actively using the computer that the enclosure is attached to, nothing on God’s green earth will stop OS X from waking them up after some user action, even ones that seem to have nothing to do with the external drives.  But if you leave the computer alone while some application is running, like watching a movie or downloading a file, you have a fighting chance of coaxing OS X into leaving the uninvolved drives alone.
    If the drives are shared with any other computers over a network, eject them on those computers
    Otherwise, OS X (AppleFileServer) will poll them every 10 seconds.  This might not be bad if you want to just keep the drives spinning and the other computer stays awake.
    Third-party apps
    Make sure no apps are running that might access your drives.  Google runs some processes that do this (maybe I’m naïve, but I was so shocked I removed chrome and every other trace of Google from my Mac mini system). Another is iStat and any utility that monitors SMART status in the background.
    Don’t let Spotlight index or search the drives
    Spotlight is persistent, and it may be necessary to take a variety of steps to stop its various processes (mds, mdworker) from accessing the drives and waking them up.  In other words, kill it, drive a stake through its heart, then burn the body:
    In System Preferences > Spotlight, add the drives to the Privacy pane.
    Add a file called .metadata_never_index to the root of each drive (note the leading period).  The easiest way to do this is in Terminal
    touch /Volumes/<drive1>/.metadata_never_index
    Tell Spotlight AGAIN to keep away from the drive:
    mdutil -i off /Volumes/<drive1> /Volumes/<drive2> . . .
    Finally delete the Spotlight folder from the drive.
    rm -rf /Volumes/<drive1>.Spotlight-*
    Stop fseventsd from logging in the drive
    This is easy, just putting a no_log file in its folder.  I have found that rarely it still writes some files in there, but it doesn’t seem to do so when it causes problems, so . . .
              rm –rf /Volumes/<drive1>/.fseventsd/*
         touch /Volumes/<drive1>/.fseventsd/no_log
    Finder sidebar
    Some people say that if the drives show in the Sidebar of Finder windows, the Finder will be checking them.  I’m not sure. But to be safe, in Finder Preferences > Sidebar, uncheck External Disks.
    Just say no to Time Machine
    On the home theater mac itself, regular backups shouldn’t be needed.  You should be able to just turn Time Machine off.  However, it is probably sufficient to simply open System Preferences > Time Machine > Options and add the drives to the list of locations to exclude from backup.
    Second, local backups can be disabled with
    sudo tmutil disablelocal
    Look for other culprits
    If the problem persists, use fs_usage, which generates a real-time log of filesystem activity. There is so much going on that you need to use grep to restrict the output to entries that involve your drives. The entries that accompany your drive spin-ups are the ones you really want.
    sudo fs_usage -w | grep -e Volumes/<drive1> -e /Volumes/<drive2> . . .
    Now leave the keyboard and mouse alone, as many things you might do will cause the drives to be accessed. You probably want to find what does it when you’re not actively interacting with the computer.  It’s not really necessary to wait for your drives to sleep and see what wakes them.  Any activity you see would probably wake the drives if they were asleep.  When you see some activity and want to stop and examine, type Control-C to stop the output.  On the far right of each entry is the process or application that accessed the disks.
    I got pointers from http://system-log.tyr.org.uk/2012/01/31/how-to-stop-usb-drives-from-spinning-up- unnecessarily-on-os-x-lion/ and http://www.jackenhack.com/disk-that-refuses-to-sleep-in-mac-os-x-how-to-fix-it/

  • Im running lightroom 4 and just purchased the Sony A7 and using its sd card. when I   tried to load the photos, I got a message "the files are not recognized by the raw format support in lightroom"

    Tried loading my raw files shot w my new Sony a7 and its sd card into lightroom4. Got a message: "The files are not recognized by the raw format in lightroom"
    Does Lightroom 4 not work with the Sony A7?
    Thanks,

    Lightroom 4 cannot read the RAW photos from a Sony A7
    You would have to download and install the FREE Adobe DNG Converter version 8.5 and then convert your RAW to DNG, and then import the DNGs into Lightroom 4
    You could also purchase Lightroom 5.5, which will have the capability to read the RAWs directly.

  • What are Before and After Images ?

    Hello Masters,
    Best wishes to all.
    For the past one week I've learnt many concepts from SDN, got all my doubts clarified.
    On the same roll, I have one more question
    What are Before and After Images ?
    Where do we come across these terms ?
    Could you please explain with an example ?
    I always thank my replies in points 
    Thanks in advance...

    <b>Hai</b>....
    <u><b>Before and After Images:</b></u>
    This Term is Used in the " Change Log "....
    Change Log is one of the Table used in ODS....
    That means the Changes in Running Request in ODS....
    Example:
    If you Enter the Request to " New Table" after activation the Request will be Deleted From the Table, You can see that in Change log......
    <i><b>Assign Points If It Halps</b></i>....
    <u><b>BalajeeKannan</b></u>

  • LSMW: What are Fixed Values and Translations for?

    Hi,
    I'm working with LSMW and I don't know what are Fixed Values and Translations for? They are on the "Maintain Fixed Values, Translations, User-Defined Routines" step.
    Thanks in advance,
    Gerard

    this is the step,we can process the reusable rules of a project.
    <b>Fixed value:</b> Here you can specify length, type, flag for lowercase/uppercase and value in addition to the description.
    this is nothing but CONSTANTS in your report programs.
    <b>Translation:</b> Here you can enter information on the source field and the target field.
    for example, your input file language value will be 2 characters and we need to send only 1 for LANG in SAP.
    so here we have to do the translation of 2chars to 1 char.
    so, we will give these set of values in this step.
    Message was edited by: Srikanth Kidambi

  • What are the values and meaning of PaymentStatusID and statusTypeId from the API

    What are the values of PaymentStatusID and statusTypeId from the API?
    The WSDL just list the fact tht these exists but not the values and meaning.

    Found more info on the BC site, figured I'd include it all.
    PaymentMethodType
    CreditCard = 1
    Cheque = 2
    Cash = 3
    EFT = 4
    PayPal = 5
    HostedCreditCard = 7 - like google checkout etc.
    DirectDebit = 8
    GiftVoucher = 9
    Free = 10
    PaymentStatusID
    Unknown = -1
    Succeeded = 0
    Failed = 1
    Pending = 2
    Denied = 3
    AddressTypeId  - AddressType
    Home Address = 1
    Work Addres = 2
    PO Box = 3
    Not Used = 4
    Shipping Address = 5
    Pickup Address = 6
    Storage Address = 7
    Billing Address = 8
    OrderType
    Quote = 1
    Invoiced = 2

  • What are these old files?

    I am going through old folders and found several of the following:
    Cache folder containing Timeline Movie Data.plist, Timeline Movie.mov
    Media folder containing Clip 01.dv,
    What are these files and can they ever be used to recreate some old project? Should I just delete?
    Thanks.

    Cache folder containing Timeline Movie Data.plist, Timeline Movie.mov
    Media folder containing Clip 01.dv,
    These look as though they are or were associated with iMovie HD 6.
    The Media folder containing Clip01.dv will be original source material, which you say you do not want to delete.
    This media will most likely have been imported from a DV tape camcorder ( or an analogue to digital converter).
    Do you still have the old version of iMovie  ? (iMovie HD 6, if I am correct).
    If you no longer have the version of iMovie that generated your above files, but have a later version that you wish to use this .dv media in, then you may well be able to import it into the later version.
    I would be curious to see if you can also import the "Timeline Movie .mov" into a later version of iMovie.
    If the Timeline Movie.mov had still been within the iMovie HD 6 project then you can carry out this import into say iMovie versions 8 and 9 (iMovie 09 and 11) and most probably iMovie ver. 10 (iMovie 13).Try it anyway.

  • What are these tools such as Erwin, Case........?

    What are these tools such as Erwin, Case, Ingres, Developer2000?-------No.187

    > What are these tools such as Erwin, Case, Ingres, Developer2000?
    Erwin is an Entity Relationship modelling tool that uses cryptic blobby symbols instead of proper crows' feet to represent one to many relationships. Heaven knows why.
    Computer-Aided Software Engineering is a generic term for a class of application that was going to replace programming in the early 1990s.
    Ingres used to be an RDBMS product.
    Developer/2000 was Oracle's flagship Forms/Reports/Graphcs application development suite in the mid-1990s. It was rebranded "Oracle Developer Suite" some years after "2000" stopped sounding cool and futuristic.

  • What are Current Value Tables VIs in LabVIEW 2010?

    I was just looking over LabVIEW 2010, and noticed a new set of VIs stored under "Reference Design".  They seem to consist of a series of VIs dealing with Current Value Tables.  What are these?  I tried to search Help, didn't find much under either CVT or Reference Design.  There's a discussion of Reference Design in the NI Tutorials, but it doesn't really seem to apply ...

    Hello Bob,
    Reference Designs are essentially application oriented examples made by NI systems engineers. These examples demonstrates how to design and integrate systems rather than NI Shipping Examples that illustrate features of products.
    You can find more information about Reference Designs here
    An Overview of Reference Designs
    http://zone.ni.com/devzone/cda/tut/p/id/8241#toc0
    Andy Chang
    National Instruments
    LabVIEW Control Design and Simulation

  • What are these weird blue dashes?

    What are these weird blue dashes that got inserted into my Pages document since I closed it? They appear with each new paragraph start or break and I can't see how to get rid of them! ( I have OS 10.6.8 and Pages 4.1)

    Probably you used tabs to indent your paragraphs instead of using First Line Indent and you have Show Invisibles turned on:
    Menu > View > Hide Invisibles
    Peter

  • My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for? Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?

    My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for?
    Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?
    I do not have any VPN enabled?

    Do you happen to have an Android?  If so and depending on what version there is a great data usage analyse tool built-in.  See if you can go to Settings -> Data Usage  from there you can pick a current or previous billing cycle and then use the vertical sliders to select a date range and it will filter the usage data per app to show you exactly what app(s) were using data during that time frame.

  • What are these called?

    Hi,
    I am trying to figure out what this element is?  Since I dont know what its actually called I have to provide a picture for my example.
    What are these elements called?  I have pointed to them in my image with the red arrows.  Im pretty sure the horizontal ones are  a "horizontal rule".  But what about the vertical ones?  And how does one implement them in a site?  http://i52.photobucket.com/albums/g29/FartyMcFly/Example.jpg
    Thanks for any answers in advance and I apologize if its something stupidly simple.
    Thanks

    How do I set the length of the border lines.
    I'm afraid there is no support for that in current CSS2 standards.
    You will be able to do it with CSS3 border-images.  But not for a few more years.
    http://www.css3.info/preview/border-image/
    In the meantime, you could put your border on a neighboring division -- see example below:
    http://alt-web.com/TEMPLATES/CSS-Basic-2-column-layout.shtml
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

Maybe you are looking for

  • Standard MDM iView for Creation of Record

    Hi All, We have requirement to create a record in MDM through Portal. Are there any standard iViews available in Portal content of MDM, which can create or update a record in MDM repository? In the Portal content we have found following two SCA BPMDM

  • [new] rubygems

    Okay, finally I think I have been able to package up rubygems. Please try it out and tell me what you think. The PKGBUILD file: pkgname=rubygems pkgver=0.8.1 pkgrel=1 pkgdesc="A package management framework for the Ruby programming language" url="htt

  • I can compile objects with SQL dev tool but not with a direct sql

    hi, This is a bit weird - I'm probably not familiar enough with Oracle's compilation process... I'm creating a some functions / procedures / triggers. When I run the script to create them with Oracle's SQL Developer tool, usually they become immediat

  • Illustrator CC Wont open on windows 8

    My illustrator will not open it keeps showing an error message but I already tried uninstalling and installing it. I even factory restored my computer and it still won't work.

  • Home Sharing vs regular iTunes sharing

    We've got a home network where one Mac Mini has all of our music and videos, which are shared to other computers such as Mac Book Pros. This is done by turning on Sharing in iTunes on the Mini, and then accessing that shared library from any other co