WHAT BIOS SETTINGS FOR RAID 0 MSI NEO4 SLI-F-AMD 3800+MANCHESTER

What are the M-Board settings for raid-0 I have 2 Seagate 7200.3 500gb drives MSI NEO4 SLI - f board and a AMD 3800+ Manchester. Thanks

Setting up raid
http://www.nvidia.com/object/feature_raid.html
There are two guides here :
Media Shield User's Guide PDF
RAID Floppy Disk Install PDF
Most things are covered in thees guides if running a nForce4 system.

Similar Messages

How to install Windows 7 in UEFI modeand what bios settings for D30

How do you install windows 7 in UEFI mode and what bios settings do I need to install it on a D30 workstation.

Not a ThinkStation guy, but FWIW, that can happen when installing Win 7 in UEFI mode when CSM support is not enabled in BIOS.
Is CSM support - either explicit or by selecting "other OS" and turning UEFI back on as suggested above - an option?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

890FXA-GD70 - what bios settings for RAM

I have a 890FXA-GD70 mb and some GSkill dual channel memory with latency of CL7-7-7-21 at 1.5v.
Specifically, what bios settings do I change to properly use this memory?
thx

Quote from: camphill on 19-April-11, 06:16:34
I have a 890FXA-GD70 mb and some GSkill dual channel memory with latency of CL7-7-7-21 at 1.5v.
Specifically, what bios settings do I change to properly use this memory?
thx
Need more information pertaining to the issue at hand, does the PC have problems booting or stability issues or does it run no problems at all?
From whats in your sig it seems you have some OCZ unless that is incorrect? What is the issue at hand?
For dual channel, put the two sticks of ram into color matched DIMM's closest to the CPU, 1&2 for AMD boards as far as I know.

Settings for OCZ3OB1600LV6GK on MSI Eclipse SLI (X58) and i7 @ 920??

Hello everybody!
Could anyone suggest me the right settings for the RAM (at 1600MHz), in order to pass memtest (in windows) wih no errors?
I've managed to setup the RAM at 1333 MHz without errors at all and my sytem stable. All the Dimms have been examined one by one and found healthy (via memtest in & out of windows). Thank you in advance!
Here are my computer specs:
MSI Eclipse SLI (MS-7520)
Intel(R) Core(TM) i7 920 @ 2.67 GHz + Noctua NH-U12P SE1366 CPU Cooler
XFX NVIDIA GeForce GTX 285 (1024 Mbytes - GDDR3)
OCZ DDR3 PC3-12800 /1600MHz /Value Series /Obsidian XTC Heatspreader /Core i7 Ready /2GB Module /6GB Triple Channel
WD2500AAKS
Corsair HX620W Modular Power Supply

Henry thank u for answering!
First image settings (in bios): 9-9-9-24 (1T), Memory Ratio 1333Mhz - Uncore Ratio 2666Mhz, DRAM Voltage -Auto (1.50V), Spead Spectrum Disasbled. PASSES MEMTEST
Second image settings (in Bios): 9-9-9-24 (1T), Memory Ratio 1600Mhz - Uncore Ratio 3200Mhz, DRAM Voltage 1.65V, Spead Spectrum Disasbled. FAILS MEMTEST
I have tried a lot of different timings to stabilize at 1600Mhz but no luck I tried also to icrease the QPI Voltage at 1.35V (as i was suggested by a friend) but i can't read anywhere the default voltage in order to increase it
The CPU-Z SPD tab 1st and 2nd image shows some sets of timings which are the same. They differ a lot than the manufacturer's settings (9-9-9-24 1.65v). Which of these should i use? Could you help me a little by being more specific?
p.s: Hope you can see the images as they are my first (pic) uploads!
(Click images to enlarge)
I made your images clickable.
-- Mark

Bios Settings For MSI K8N Neo4/SLI Platinum MB

Hello all... Has anyone came up with the best and most stable bios settings for the MSI K8N Neo4/SLI Platinum motherboard yet. Specifically under the CPU and Memory menus.
If anyone has seen any, please post them. or post a link.
Thanks
DaaDoctor

Well that depends on the installed CPU and memory, doesnt it? So I find that question kinda odd.
One thing though: Dont use Cool n Quiet.

Bios settings for single SATA Drive Help

I have just installed a 945P Platnium mother board with a Pentium 4 3.4 extreme with HT tech.
I have 2 GB of memory, nvidia 1 gb video 9800 GT, I have 2 IDE hard drives: WD 320 GB(C:) and WD 120 GB (E:) and a CD/DVD drive (F:). I installed a WD 500 GB SATA drive on SATA 1 and the two IDE hard drives on IDE 1 on the same cable with the 320 GB as master and the 120 GB as slave. The CD is on IDE channel 2 as the master. I have cloned the IDE 320 (c:) to the 500 GB Sata which is now the boot drive (c:).
I have been able to boot the computer but the CD/DVD drive doesn't show. If I unplug the the hard drives and reboot then the CD/DVD drive shows up.
My question is: I want the single 500GB sata as the boot drive (c:) (don't need RAID?). I want the two IDE drives with the 320GB as drive (e:) and the 120GB as drive (whatever) and the CD/DVD drive to show up as (F: or whatever).
I don't know what settings in the bios I need to be working with. I have been experimenting but would like the correct way to set the bios up.
Thanks

Nope. Didn't work.
I can try things all day but this doesn't make sense. Surely someone knows what bios settings are required (especially on the MSI board site) to set the bios on a MSI 945p platnium motherboard. I have the sata drive plugged into the Sata 1 connector and bios still says it is ide channel 4 master. The computer will boot with just the sata drive plugged in but the problems start when I plug the ide drives in on ide 1 or 2 or 3.

Suggested K8T Neo BIOS settings for CL 3 Kingston Value RAM

G'evening!
I'll be putting together a system with the Athlon 64 3000 and K8T Neo board and had a question about optimal BIOS settings for paired Kingston non-ECC DDR 3200 RAM (2x512mb) that's CAS 3. Should have gotten some CAS 2.5 probably but this is what I have for now so in it goes. I'm reading the quick users guide and noticed that you can manipulate the CAS, TCRD, TRAS, and TRP.
First question: Will the board's auto detect do a good job in picking out a stable configuration?
2nd question: If you had to or wanted to make manual settings, what would you suggest? The CAS value is rather easy since I guess it should be set to 3 but what settings would one pick for the others?
And if I still have your attention...
The other things that will be going in the system are the infamous Maxtor 120 gig SATA HD, a XFX 5900FX video card, Lite-On combo burner. Powersupply is an Antec Solution Series 400W PS. After reading the forums for a bit I get the impression that you shouldn't forget to load the SATA Promise drivers so the HD will get recognized. My SATA drive will be the only drive in the system and will of course be the boot drive. Any other possible pitfalls or problems I should know about with the Maxtor SATA's and the K8T Neo board?
Also, I had thought I read from a review that the Zalman Al-Cu CPU heatsink/fan will fit on this board. Of course after seeing it in my hands for the first time I thought that it was a pretty damn big heatsink. Anyone else using this heatsink? (haven't taken it out of the packaging yet so that's why I wanted some impressions).
Thanks for any advice you can give me. It's been a bit of time since I built a computer and I'm sure there's alot of basic things I'm relearning along with the fact that the Athlon 64 is fairly new technology. On the other hand, when it's running smoothly...

Cant offer anything on the Timing, (sorry as I am Intel Fodder ), But I can assure you that the Zalman 7000-AlCu, Will Indeed Fit onto your Motherboard (With Room To Spare!) :biggthumbsup:I can attest to this because My buddy just installed the Zalman 7000-AlCu on his K8T ....And He loves it! As do I ....It's about the only thing that we have in common as far as PC'S Go .........Sean REILLY875

MOVED: Bios settings for single SATA Drive Help

This topic has been moved to Intel P4/Celeron boards.
https://forum-en.msi.com/index.php?topic=142931.0

Nope. Didn't work.
I can try things all day but this doesn't make sense. Surely someone knows what bios settings are required (especially on the MSI board site) to set the bios on a MSI 945p platnium motherboard. I have the sata drive plugged into the Sata 1 connector and bios still says it is ide channel 4 master. The computer will boot with just the sata drive plugged in but the problems start when I plug the ide drives in on ide 1 or 2 or 3.

Best BIOS settings for Kt3 Ultra2 and Geforce4?

Hi,
Can someone tell me what the best BIOS settings would be for my KT3 Ultra2 running a Geforce4 ti4200?
I get crappy scores in 3dMark2001 SE and I have the infamous stuttering/crashing problems in 3D games. I've tried pretty much every configuration of settings and drivers I can think of.
I saw on these forums that the Kt3 Ultra2 can be a bit fussy with GF4 cards. If someone could post the best BIOS settings for performance and stability I'd be eternally grateful.
Alternatively, email me at [email protected] with them.
Thanks in advance

very very similar as far as i can make out

Bios Settings for 785GT-E63

Where can I find BIOS settings for the 785GT-E63 that will give me the most optimum performance for my system? My system consists of:
Nvidia GeForce 7300GT graphics card-256MB memory
G.Skill-4GB DDR2 PC2-6400 Memory
Phenom X3 8600-2.3 GHZ
Coolermaster case with 2-120MM fans
Coolermaster 500 watt PSU
Stock cpu cooling fan
Can someone tell me what I need to do to optimize this system? Would like to buy another CPU, but not sure if I am getting the most out of this one. Help!!

Quote
Would like to buy another CPU, but not sure if I am getting the most out of this one.
How do you mean? If your CPU is correctly recognised, and operates at its native speed of 2.3ghz, then you're getting the most out of it.
Does your system work without issues? Does it do everything you require of it, and do it well?
If yes, and yes, then stop fretting and enjoy your system, instead of trying to look for problems that aren't there.
Of course, if you want to try and push your system further, then you'll have to start overclocking. But we have a whole seperate area for that here, and you should post your questions there.

Default Bios Settings for RS480MS-IL2

Hi all
I am just wondering if there is some hidden key that loads some Default Bios Settings for this board? I know there is an Optimized Settings option, but i haven't seen a Default one.
I am using version bios version 3.8
Thanks.

have you tried a better psu
a 128 mb ram consumes around around 8 to 10 watts
http://www.blueowltechnologies.com/pmConsumption.asp
volts x amps =watts
3.3v feeds ram
so at most you have 46 watts on a good day

Need help with bios settings for Neo4 Platinum

Hi. I've checked several guides on bioses and still have questions about my settings. I'm not an overclocker, so I'm looking for stability over anything else (although I don't want my computer to run like a pig . I'll post what I have and the parts of the bios that I'm unsure of. I also have saved pictures of a Cpu-z scan if that helps. Any suggestions are much appreciated!
Here's my stuff:
Motherboard: MSI K8N NEo4 Platinum (MS-7125)
Processor: AMD Athlon 64 3000+ 512K 90nm (Winchester socket 939)
   clock frequency: 1800mhz
   system bus: 2000
   operating mode: 32/64
   voltage: 1.40v
   max temp: 70 degrees C
   thermal power: 89w
   L1 cache: 128KB
   L2 cache: 512KB
   cmos technology: 90nm SOI
   memory controller: 128-bit
Award bios version: 1.9
Installed ram: Micron Crucial Ballistix 512MBx2 (1024MB total) (Crucial
part number BL6464Z402)
   PC3200 400mhz Dual-Channel DDR Dimm (184 pins)
   configuration: 64Meg x 64
   unbuffered/non-ecc
   voltage: 2.8v
   memory timings:   2-2-2-6
Here's my current bios settings (I've only listed sections that contained settings that I was unsure of):
ADVANCED BIOS FEATURES
quick booting: enabled
boot to os/2: no
ioapic function: enabled
mps table version: 1.4
full screen logo display: disabled
seek floppy: enabled
typematic rate setting: enabled
typematic rate: 30
typematic delay: 1000
security option: setup
ADVANCED CHIPSET FEATURES
--->>DRAM CONFIGURATION
timing mode: manual
memclock index value: 200mhz
cas# latency TCL:2
min ras# active time TRAS: 6t
ras# to cas# delay TRCD: 2t
row precharge time TRP: 2t
row to row delay TRRD: auto
row cycle time TRC: 8t
row refresh cyc time TRFC: 11t
read-to-write time TRWT:auto
write recovery time TWR:auto
write to read delay: TWTR:auto
refresh period TREF:auto
user config mode: auto
x bottom of 32-bit [31:24] io: D8
x 1t/2t memory timing: 2t
x read preamble value: 8ns
x async latency value: 9ns
s/w memory hole remapping: disabled
mtrr mapping mode: continuous
PNP/PCI CONFIGURATIONS
primary graphic's adapter: first pcie
resources controlled by: auto (escd)
x irq resources setup: press enter
maximum payload size: 4096
CELL MENU
current cpu clock: 1810 mhz
current ddr clock: 201 mhz
high performance mode: manual
aggressive timing: disabled
dynamic overclocking: disabled
adjust cpu fsb frequency: 200
ht frequency: 5x
ht width: (down arrow 16/up arrow 16)
cpu spread spectrum: disabled
sata spread spectrum: disabled
pcie spread spectrum: disabled
pcie clock: 100 mhz
sse/sse2 instructions: enabled
cool'n'quiet: disabled
adjust cpu vid: startup
extra cpu voltage: by cpu vid
cpu voltage 1.400v
memory voltage: auto
nf4 voltage: 1.50v
Thanks again. xpfshost

I'll do that, thanks. I guess I'm really mostly clueless about the following items:
memclock index value: 200mhz
row cycle time TRC: 8t
row refresh cyc time TRFC: 11t
current cpu clock: 1810 mhz
current ddr clock: 201 mhz
adjust cpu fsb frequency: 200
ht frequency: 5x
ht width: (down arrow 16/up arrow 16
pcie clock: 100 mhz
Do they look OK?? Thanks!
xpfshost
Quote from: Grayone on 19-April-07, 05:13:03
Change your user config mode in dram configuration to manual and change your memory timing to 1T. The 1T setting will speed up your memory slightly.

BIOS settings for MSI 770-c45 - overclocked with a Phenom II 550 Black Edition

Hi,
Wish I could say I knoew what these bios settings are, but I can't - I really need some help here. Anyone who has this m/b knows that there is a dip switch to help you get a 10%/20% perf increase, but it fails for me...
Anyone have some advice onthe appropriate settings?
Many thanks,
Sayer

here's mine:
Phenom II X2 550BE@4ghz
MSI 770-C45 bios 1.3B2
Team Xtreem DDR3 1866 C8 running DDR3 1550 7-7-7-21@1,8v
cooling Thermalright Ultra 120 extreme, dual fans
bios settings (Cell menu only, I dont think the others setting would affect)
* AMD Cool N' Quiet--->disabled
* CPU Fsb freq--->230mhz...might different with yours, depend on your CPU though
* CPU Ratio--->17.5
* CPU-NB Ratio--->x9
* EC Firmware--->normal
* Advanced Clock calibration--->disabled
* Auto Overclock--->disabled
* multi-step OC booster--->disabled
* HT link control--->x9
* vcore--->1,55v (must use good cooling with this voltage)
* vdimm--->1,84v
* NB voltage--->1,2v
* CPU-NB voltage--->1,33v
other setting are all auto

Request for proper BIOS settings for MSI "KM4M-V" VIA KM400

Hello,
I tried to search on this problem but with no success. I have a computer that I had to reset the bios and I'm trying to get the clock speed adjusted to the processor chip. Here is my setup:
MB = MSI "KM4M-V" VIA KM400 (MS-7061)
CPU = AMD ATHLON XP 3000 "Barton" 333 FSB OPN - AXDA3000DKV4D
Here is my problem, when I boot up the cpu shows the clock speed of 1.733 GHZ with default BIOS settings.(it shows this speed in windows when booted up also) When I try to go into the BIOS and change any of the speed settings under Advance Chipset Features, the cpu will reboot and loose video until I reset the BIOS with the jumper.
I was wondering if someone had a setup like this and could give me info on what settings are the RIGHT ones to get the AMD XP 3000 up to speed? ;-)
Any help would be greatly appreciated!!!

Quote
Did a search on the form and looked thru that posting guide with no results.
Read >>Posting Guide<< and provide full system specification.
Quote
how do you find CPU OPN code?
Look over CPU itself:

NF980 + SLI What Bios settings should be set at for PCIE.

I currently purchased back in april the 955 BE am3 chip from AMD. I paired that with 4 gig's of mushikin 1600 ddr3 ram with a latency of 7-7-6-18. I have installed 2 EVGA Geforce 9800 gtx+ SSC editions. Now here my issue, I currently play a brand new MMO called Aion. This board got released right as Aion came out, but at the time I was currently using a m4a79T deluxe, but obviously only utilizing one video card. Aion flew at between 120-130 fps. Now I purchased this board (NF980-65) hooked up everything I did above, again pairing it with Vista 64. I am now utilizing an SLI setup. However on this board my ram is showing much much lower then what it should be. I've read through the forums and will be correcting the ram issue tonight. But now I am curious what the Bios settings should be for PCIE because my frames per second NOW using two cards, has dropped down to , get ready for this 20-50 fps. All drivers are current, and up to date. Everything except the ram is proper and in order. I am wondering if I need to manipulate the Bios for PCIE or something, or what they should be at exactly so that I can utilize this system to its fullest potential. These cards are Nvidia, this board is Nvidia, yet 1 card ran better on a crossfire only board. Please help.

Quote from: Svet on 02-October-09, 00:34:09
Install latest VGA drivers ==> http://www.nvidia.com/object/win7_winvista_64bit_191.03_beta.html
191.03, 2009.09.25
Also the game "Aion" may not have corespond SLI pro file or to do not support SLI.{contact to game vendor to find out}
Another tip:
Apply from Nvidia CP:
Turn off Vertical sync
And set SLI Performance mode to: "Force alternate frame rendering 2"
Apply and re-test.
The game does not have an SLI profile. However, I should have mentioned, I uninstalled 1 card to kind of recreate my april environment. No change in FPS. Nivida control panel also has a feature to create your own profile if you will, or turn off sli, which I did too, without change. It has the last nvidia drivers of course, as its a brand new build, so it would require brand new drivers. I said that in the initial post. Again, all settings in OS and hardware are proper and in proper order. Thats why I asked about bios to begin with. You cannot setup a new computer with a fresh install and even see the nvidia control panel without installing it first which would be accompanied by the newest nvidia driver install package. Fyi. Also, I tried the additonal tip you mentioned in creation of a profile...Didn't change.
You seem to know alot about this,I'm honestly impressed. But are you certain my bios settings from the factory are completly correct for an SLI setup?

WHAT BIOS SETTINGS FOR RAID 0 MSI NEO4 SLI-F-AMD 3800+MANCHESTER

Similar Messages

Maybe you are looking for