What could be causing Illustrator CS6 to freeze when I save a particular .ai file?
I tried saving it in a new location, changing the name, and saving it in a legacy format. Every time I ended up with the spinning beachball. No other file is having this issue. What could I look for in the file that might be causing this?
Interesting note: once during this process I left the computer for 20 minutes, and it eventually unfroze. Still had the same issue when I tried to save it again.
We have seen this issue with the latest Esko Data Exchange plug-in, version 12.0.147 and Illustrator CS6.
If you are using Pantone Plus swatches, you may see a beach ball during a save. Either, remove the Esko folder from the Illustrator Plug-ins folder, or change your Pantone Plus swatch from an LAB value to a CMYK. Your file will now save correctly.
UPDATE: I received a response from Esko, they said to turn off this option: In Illustrator CS6 go to: Illustrator/Preferences => Esko and turn off "update XMP on Document Save". Confirmed, it corrects this issue!
Similar Messages
-
On my PC running windows XP Service Pack 3, iTunes 11.0.3.42 causes it to hang when attempting to view a .MOV (1.6 GB) requiring a cold boot. What could be causing this? Corrupted .MOV? Too little RAM? It successfully plays a 162 MB .MOV.
Hello David,
Thank you for providing all that information about the iTunes issue you are experiencing. We would first want to rule out any software issues before we can determine if it has to do with RAM. I found an article that will help you isolate and troubleshoot software issues that could be causing iTunes to behave this way:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
I hope this helps you get back on track with watching movies in iTunes!
Best,
Sheila M. -
THE LINKS AT THE TOP OF ANY WEB PAGE NO LONGER WORK. wHAT COULD BE CAUSING THIS
WITHIN THE LAST FEW DAYS NO MATTER WHAT WEBSITE I GO TO THE LINKS IN THE BANNER OR TOP PORTION OF THE PAGE DO NOT WORK. THE SYSTEM DOESN'T SEEM TO KNOW THAT THEY ARE LINKS WHEN I HOVER OVER THEM I GET THE MOUSE ARROW ICON INSTEAD OF THE HAND LIKE I DO ON ALL OTHER LINKS ON THE PAGE. THE LINKS ON THE SIDES AND BOTTOM OF THE PAGE WORK JUST FINE. WHAT COULD BE CAUSING THIS?
That is a problem with the Yahoo! Toolbar.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
What's New in Illustrator CS6 | Visual Design CS6 | Adobe TV
Adobe Design evangelist Rufus Deuchler provides an overview of what's new in Illustrator CS6
http://adobe.ly/I7OPj9Me parece algo inverosimil ver a una persona diseñando en un portatil y moviendo vectores u objetos con trackpad, si pudiesemos modificar eso quedaría más creible y profesional. De todas formas el video es bastante ilustrativo.
-
Hi, my MacBook Pro has become very slow... what could be causing this and what can I do to fix it?
Hi, my MacBook Pro is working very slowly.. what could be causing it and what can I do to fix it??
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
What could be causing import error?
I purchased a GoPro HERO helmet-mounted digital camera and connected it to my MacBook (OS X 10.5.8) with iMovie (7.1.4) using a USB cable.
The camera produces MP4 files which are visible in finder.
When I open iMovie it identifies and displays the movie clips for importing but at the end of the import process it says "An Error Occurred During Import" and the files are not finally imported. I tried numerous times, even importing one small clip at a time and get the same message.
There is no further information on what could be causing this.
The only way I managed to import these clips was to first copy them to my hard drive and then use the "Import movies" option in iMovie.
Anyone have ideas why I can't import directly from the camera?
Bill.I changed my directory in Unix to JAVA_TOP and I ran the command as follows -
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/oracle/apps/gl/translation/webui/AuditDetailPG.xml -username apps -password password -rootdir $JAVA_TOP/ -dbconnection "(description=(address_list=(address=(protocol=tcp)(host=devrdebsdb38.dev.mycompany.com)(port=1553)))(connect_data=(sid=AEBDV02)))"
I get the following error with the above command - Segmentation fault. At least it is not NullPointerException! Any clue to what could be causing a Segmentation fault? -
appears and quickly disappears a new screen overlaying the screen in use, it starts at the bottom of the screen tela.MACbook pro retina.O what could be causing this?
Thanks for the suggestion, the next step was to call Apple, who gave me a claim number, which I discovered you must have to get anything done with them. They refered me to a Apple store or repair center, after some reseach took it to the Computer Store in Mobile, Alabama and they were excellent. They took pictures of the screen with bug submitted it to Apple who denied the claim but they kept kicking it up to the next level and finally Apple agreed to sent new cover. The Computer Store had the cover the next day, they changed it out and now I am bug free. If your in the area of Mobile Alabama you can feel good about getting help from the Computer Store. For the two folks that responded to my note, Thank You, good comments and good advice.
-
RE: (forte-users) What could have caused the StopWatch classto r eturn
Attila
1. Ops - I DO instantiate it as follows:
[snip]
sw : StopWatch = new;
[snip]
I missed the "= new" in the orig mail message (cut/past from wrong
workspace).
2. LogWriter(deltaT:integer, t1:DateTimeData, t2:DateTimeData)
[snip]
task.part.logmgr.put('| ');
task.part.logmgr.put(deltaT);
task.part.logmgr.put(' | ');
task.part.logmgr.put(t1);
task.part.logmgr.put(' | ');
task.part.logmgr.put(t2);
task.part.logmgr.putline(' |');
[snip]
OK, it's just a quick 'n dirty but it does the job for testing.
Regards,
Dirk
-----Original Message-----
From: Attila Rácz [mailto:[email protected]]
Sent: Thursday, 7 October 1999 14:35
To: Haben, Dirk
Subject: Re: (forte-users) What could have caused the
StopWatch class to
return a negative v alue?
Hi Dirk,
1. You don't instantiate the StopWatch object!!! So the
attached code have to
throw a NIL exception. On my PC it does:
"Trying to invoke a method on a NIL object (qqos_StopWatch, 1)."
2. Send the whole LogWriter method for analyzing.
Attila
"Haben, Dirk" wrote:
G'day
Suppose the following output is produced:
Loaded Forte Message Catalog 'fortemsg/en_us.cat'
NLM Startup is Complete - Partition's Locale is 'c'
Loading partition CollectResponseStatistics_cl0_Client built on 30-Sep-1999
09:12:28.
Attached to manager for node BLAH.
%DiH-I-VERID: CollectResponseStatistics_v371.002
%DiH-I-BGP, BGP Started...
%DiH-I, Repeat Interval (in milliseconds) 300000
%DiH-I, Sample Account Number: 123456
%DiH-I-BGPSTART, BackgroundProcessing started at: 07-Oct-1999 08:54:16
| Total Time | Account Fetch | Account Fetch |
| in milliSeconds | Start Time | Completion Time |
|-----------------|----------------------|----------------------|
| -194 | 07-Oct-1999 08:54:16 | 07-Oct-1999 08:54:17 |
What could cause the stopwatch class to return this negative value? Here is
the code that is run:
sw : StopWatch;
//that line is actual as follows:
sw : StopWatch = new;
//*****[Dirk]
>>
BP_t1 : DateTimeData = new;
BP_t2 : DateTimeData = new;
BP_t1.SetCurrent();
self.LogWriter('%DiH-I-BGPSTART, BackgroundProcessing started at: ',BP_t1);
self.LogWriterHeading();
tmpAcc : account = new;
sw.fire();
BP_t1.SetCurrent();
tmpAcc = self.AccountFetch(aAccountNumber);
BP_t2.SetCurrent();
deltaT : Integer = sw.split();
self.LogWriter(deltaT,BP_t1,BP_t2);
Oh, and the logwriter is just a formatted logmgr.put(deltaT) ,
logmgr.put(t1) etc
Any light on this one much appreciated.
Thanks,
Dirk
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to:
[email protected]
Attila Racz Lufthansa
Systems Hungary
BUD LSYH
E-mail: [email protected] .-``'.
Tel.: (36 1) 431-2910 .` .' Mazsa ter 2-6.
Fax : (36 1) 431-2977 _.-' '._ H-1107
Budapest, HungaryAttila
1. Ops - I DO instantiate it as follows:
[snip]
sw : StopWatch = new;
[snip]
I missed the "= new" in the orig mail message (cut/past from wrong
workspace).
2. LogWriter(deltaT:integer, t1:DateTimeData, t2:DateTimeData)
[snip]
task.part.logmgr.put('| ');
task.part.logmgr.put(deltaT);
task.part.logmgr.put(' | ');
task.part.logmgr.put(t1);
task.part.logmgr.put(' | ');
task.part.logmgr.put(t2);
task.part.logmgr.putline(' |');
[snip]
OK, it's just a quick 'n dirty but it does the job for testing.
Regards,
Dirk
-----Original Message-----
From: Attila Rácz [mailto:[email protected]]
Sent: Thursday, 7 October 1999 14:35
To: Haben, Dirk
Subject: Re: (forte-users) What could have caused the
StopWatch class to
return a negative v alue?
Hi Dirk,
1. You don't instantiate the StopWatch object!!! So the
attached code have to
throw a NIL exception. On my PC it does:
"Trying to invoke a method on a NIL object (qqos_StopWatch, 1)."
2. Send the whole LogWriter method for analyzing.
Attila
"Haben, Dirk" wrote:
G'day
Suppose the following output is produced:
Loaded Forte Message Catalog 'fortemsg/en_us.cat'
NLM Startup is Complete - Partition's Locale is 'c'
Loading partition CollectResponseStatistics_cl0_Client built on 30-Sep-1999
09:12:28.
Attached to manager for node BLAH.
%DiH-I-VERID: CollectResponseStatistics_v371.002
%DiH-I-BGP, BGP Started...
%DiH-I, Repeat Interval (in milliseconds) 300000
%DiH-I, Sample Account Number: 123456
%DiH-I-BGPSTART, BackgroundProcessing started at: 07-Oct-1999 08:54:16
| Total Time | Account Fetch | Account Fetch |
| in milliSeconds | Start Time | Completion Time |
|-----------------|----------------------|----------------------|
| -194 | 07-Oct-1999 08:54:16 | 07-Oct-1999 08:54:17 |
What could cause the stopwatch class to return this negative value? Here is
the code that is run:
sw : StopWatch;
//that line is actual as follows:
sw : StopWatch = new;
//*****[Dirk]
>>
BP_t1 : DateTimeData = new;
BP_t2 : DateTimeData = new;
BP_t1.SetCurrent();
self.LogWriter('%DiH-I-BGPSTART, BackgroundProcessing started at: ',BP_t1);
self.LogWriterHeading();
tmpAcc : account = new;
sw.fire();
BP_t1.SetCurrent();
tmpAcc = self.AccountFetch(aAccountNumber);
BP_t2.SetCurrent();
deltaT : Integer = sw.split();
self.LogWriter(deltaT,BP_t1,BP_t2);
Oh, and the logwriter is just a formatted logmgr.put(deltaT) ,
logmgr.put(t1) etc
Any light on this one much appreciated.
Thanks,
Dirk
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to:
[email protected]
Attila Racz Lufthansa
Systems Hungary
BUD LSYH
E-mail: [email protected] .-``'.
Tel.: (36 1) 431-2910 .` .' Mazsa ter 2-6.
Fax : (36 1) 431-2977 _.-' '._ H-1107
Budapest, Hungary -
I purchased 2 ipad mini's at Xmas, I then sync'd them with itunes on my pc, and put basically the same apps on each of them. Both are 16gb units. One of them is full ( with over 9gb of "other" memory) the ipad still has 10gb left.What could be causing this "other" storage
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
Cheers, Tom -
I am trying to save a large file on Illustrator CS6 and it does not save and instead says "Unknown Error Occurred." What do I do?
The file has 4 artboards with webpage designs. I tried to take two of the artboards, create a separate doc with those two, and save, but the result was the same.
However, I am able to save simpler, smaller files.
I need to not lose these files and I am afraid to quit and restart and lose my unfinished work.
Any advice?What happens if you choose this option?
-
I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings
OK, but in my ipad, the apple id i have in itues is already the one iwant to have, but th one i used to sin in for i-coud is the other one. Any tip as to how to change the apple id for icloud and any idea how to know what apps i bought with the other apple id so as to delete them from my ipad to avoid being asked to enter another apple id every time they get updated? thanks!
-
I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.
Thomas A Reed wrote:
You will be advised by people here that Sophos is "junk" and should be removed {...} Sophos actually works pretty well, in my testing, and so I would suspect that there may be an underlying problem with your file system that needs to be repaired.
FWIW, I have used Sophos regularly for several years now (including on my new iMac running Mountain Lion versions 10.8.2 & now 10.8.3) & never had any problems with it on any of the half dozen or so Macs I have installed it on.
Quite a few people automatically assume all Mac A-V software is troublesome junk, & many will leap to the conclusion it is the cause of some problem without considering other potential (& often much more likely) causes, regardless of which A-V product is installed.
Obviously I hope, not all A-V products are alike, so it doesn't make a lot of sense to me to condemn them all because of problems with one of them. Regarding Sophos in particular, finding first hand reports of it causing problems is quite difficult -- typically, if you ask for the details it turns out to be a second or third hand report & there isn't enough info available to know for certain if it is the real cause or not.
This is not to say it is impossible for it to cause problems, just that it is prudent to consider all the possibilities before concluding that any one of them is the cause. -
I purchased a refurbished iBook G4-Version 10.4.11 and everytime that I try to purchase anything on iTunes or change something in my account, I click "done" and it says that I have timed out, when I'm on there for less than a minute. Hence, none of my purchases have gone through.What could be causing this?
You need to use a newer Mac OS X version. A G4 can be upgraded to 10.5.8(if desired, buy a retail DVD from a source such as Amazon or eBay), but you'll likely find it more cost-effective to buy a secondhand Intel Mac.
(124606) -
Logic Pro 8 crashes every time I press "record." What could be causing this?
Hi,
I have Logic Pro 8 and opened it today for the first time after updating to Snow Leopard. Logic opens just fine, but if I try to record an audio track it crashes almost immediately (I was just using the built-in microphone, nothing external). It doesn't crash if I record to a midi track. Any ideas as to what could be causing this? I went and updated to 8.0.2 and it still did the same thing. This never happened before. I'm wondering if it's related to using Snow Leopard?
Thanks for any advice you might have!Hi,
All your Creations should be fine...
But just to be Safe, back them up to an External HD and save them as PROJECTS with ALL ASSETS...
Just make sure to have the LP 8 Serial Number handy for when and if, you are asked for it during the Install...
Also, after the Install, don't forget to Run Software Update to get the Latest version of LP 8...
Cheers, -
My iPad isn't working. I cannot follow a link in an email or connect to a game. It goes to a black screen then back to the main screen. Any idea what could be causing this?
Settings > General > Reset > Reset Network Settings
Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
Then test to see if it solved the problem.
Maybe you are looking for
-
I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos sa
-
Oracle 11g installation on Oracle Enterprise Linux, 64bit version.
Hi I want to install oracle 11g on Oracle Enterprise Linux, 64bit version. Do I need to set kernel parameters in this operating system, since it is not standart Linux editions. or Can I have a step by step documentation for installing oracle 11g on t
-
HT2513 How do i export iCal to make it import into microsoft outlook
How do I export iCal and make it import into Microsoft Outlook?
-
Looking for an online bit calculator
What's the best way of determining bit rate for long form jobs. I do between 1 1/2 hours to 2 hours 20 minutes? I am interested in 2 pass mainly. I will be using FCP6 & converting to m2v-ac3 in compressor then bringing into DVD studio pro4 for author
-
Every time a pop up come ' an error occurred while checking updates for software update' please help
please help me to update the software