What do I do with this error message?

My "C" drive, which is where I originally set up iTunes. was nearly full from the music I had downloaded from cd's so I moved everything to my "D" drive which has a huge amount of space and is nearly empty. Everything went well until I picked a song to play and I got the following error message: The song" " cannot be used because the original file could not be found. Would you like to locate it?" I went to the "D" drive and opened the song, it then duplicated itself into iTunes and began to play. Now I have a song the error message says it can't open and one that plays correctly. I have downloaded 768 songs into iTunes so far. Am I going to have to follow these same steps 768 times or is there an easier way? Thanks.
Sony Vaio   Windows XP  

This article in the Apple Knowledge Base outlines the method for changing the location of the iTunes Music folder.
I'm guessing you didn't follow that method so if your music is still on the C drive, I'd suggest deleting it from the D drive and starting over again by following the steps in the article.
If your music isn't on the C drive any more, post back and we'll try something else.

Similar Messages

  • What do I do with this error message: To use this library, make sure its file permissions are set correctly.

    So I cannot even access the application. It was working fine yesterday and today I get this error message:
    To use this library, make sure its file permissions are set correctly.
    I have changed nothing. All the pictures are there on the computer. Help?!

    Reboot.  Close any programs which open at start-up.  Run Disk Utility (you can type this in the Spotlight search field at the right end of your Menubar).
    In Disk Utility, select your drive from the list on the left, and click "Repair Disk Permissions".  This will take a few minutes, but should be less than ten.
    Reboot.
    Try to open your Library in Aperture.  What happens?

  • What should I do with this error message:

    Two days ago I opened Photoshop Elements 7 and received this error message:
    There is no disk in the drive.  Please insert a disk into drive \Device\Hard disk5\DR5
    I have uninstalled and reinstalled and updated.  Restarted the computer and I still get the same message.
    Please someone help!  I use this program often.  Thanks.

    Try resetting the PSE preferences by
       1. Close Elements.
       2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Edit.
       3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.

  • What do I do with this error message Component returned failure code: 0x8050000e (NS_ERROR_ILLEGAL_INPUT) [nsIConverterInputStream.readString]?

    I am trying to do a mail merge.
    I downloaded the add on and finally got it enabled.
    So under file Mail Merge is an option and I get through all of it, but then I get this error message every time.
    How do I fix it?

    you contact the add-on author and ask him... there is an email address on the add-on download page.

  • I just bought v10.7lion but when I try to install it comes with this error message:"Install Failed"...try to install again. Now I've been restarting over and over again.  What should I do?

    I just bought v10.7lion but when I try to install it comes with this error message:"Install Failed"...try to install again. Now I've been restarting over and over again.  What should I do?

    JPPI-
    Did you try it with the iTunes your Mac already has?
    Try running Software Update in your System Preferences.  That should bring your computer up to the latest software available for 10.4.  You would end up with an older version of iTunes, but that may be good enough to activate your iPad.
    Fred

  • I am having trouble installing Lightroom 5 with this error message: Payload: AdobeLightroom5CCMPkg-m

    I am having trouble installing lightroom 5 with this error message:
    Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80} -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
    what should I do? Billmeb

    Hi BillMeb,
    Please refer the knowledge base article: http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html.
    Regards,
    Romit Sinha

  • What is the cause of this error message?

    What is the cause of this error message?
    What is the solution to this problem ?
    Thanks

    First part of your question:
    Error Message
    %CFT_API-3-CFT_ERRMSG_NO_MEMORY: [chars] [chars] [dec]
    Explanation
    The system was unable to supply the requested memory for flow processing to continue
    Recommended Action
    Reduce other system activity to ease
    memory demands. If conditions warrant,
    upgrade to a larger memory configuration.
    link:
    www.cisco.com/c/en/us/td/docs/ios/system/messages/guide/sm_cn02.pdf
    Pretty generic, but its a start, the process in question is cft_flow_lookup.
    This may be an indication of a deeper resource issue.

  • What do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

    what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

    It can be that you have an old version of Photoshop Elements and a new camera.
    Please tell us
    Which operating system you are running on
    Which version of Photoshop Elements you are using
    Which camera the raw images come from (Make & model)
    Brian

  • ISync fails - what to do with this error message?

    I set my iMac to autosync everyday at a certain time. I realized that the last sync was 7/27/06, and when I go to Sync tab in the .Mac system preferences, I get the following ".Mac Sync Error" message exactly as follows:
    "* -[NSKeyedUnarchiver initForReadingWithData:]: incomprehensible archive (0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0)"
    Any idea of what sync fails? and what I need to do ?
    Thanks!

    With the release of Mac OS X 10.4 more than a year ago, iSync no longer has anything to do with the synchronization of contacts, calendars and tasks with .Mac - that is the responsibility of .Mac Sync. You should probably post you query in the .Mac Sync forum, here:
    http://discussions.apple.com/forum.jspa?forumID=957
    You may be able to deal with the error message by resetting the Sync Services framework—its truth database, actually—by launching iSync, opening the Preferences… dialog, and pressing the Reset Sync History button. That will leave your data intact and your sync clients registered, but reset the truth database and framework to behave in such a way that your next synchronization event will appear to be the first event you have ever performed.
    The 'incomprehensible archive' the error message refers to is likely on your Macintosh.
    Before proceeding further, back up your contact and calendar files using the built in provision to do so in both the Address Book and iCal. If resetting the database does not correct your issue, you can launch System Preferences, open the .Mac pane and press the Advanced tab. In the lower left corner is a Reset Sync History button. Press that, and in the dialog which appears, configure .Mac to overwrite the data files for one OS X application on your machine at a time, starting with contacts. Make sure that you overwrite your computer data [which you have just backed up, and can therefore restore if that is necessary] with the data from .Mac.

  • What to do with this error message?

    Database Log In Failed
    TNS could not resolve service name
    Verify that the TNS name in the connectstring entry of the DAD for this URL is valid.
    Thank you,
    David
    [email protected]

    With the release of Mac OS X 10.4 more than a year ago, iSync no longer has anything to do with the synchronization of contacts, calendars and tasks with .Mac - that is the responsibility of .Mac Sync. You should probably post you query in the .Mac Sync forum, here:
    http://discussions.apple.com/forum.jspa?forumID=957
    You may be able to deal with the error message by resetting the Sync Services framework—its truth database, actually—by launching iSync, opening the Preferences… dialog, and pressing the Reset Sync History button. That will leave your data intact and your sync clients registered, but reset the truth database and framework to behave in such a way that your next synchronization event will appear to be the first event you have ever performed.
    The 'incomprehensible archive' the error message refers to is likely on your Macintosh.
    Before proceeding further, back up your contact and calendar files using the built in provision to do so in both the Address Book and iCal. If resetting the database does not correct your issue, you can launch System Preferences, open the .Mac pane and press the Advanced tab. In the lower left corner is a Reset Sync History button. Press that, and in the dialog which appears, configure .Mac to overwrite the data files for one OS X application on your machine at a time, starting with contacts. Make sure that you overwrite your computer data [which you have just backed up, and can therefore restore if that is necessary] with the data from .Mac.

  • What's the meaning of this error message?

    I regularly receive from different AEBS the following error
    message:
    | Sep 16 11:33:06 15a6.net.pasteur.fr 15a6-net-pasteur-fr dot11: Deauthenticated with station 00:11:24:2d:39:a6 (received invalid class-3 frame).
    What is the cause of this error?
    What is an invalid class-3 frame?
    dan

    Hello,
    If you found that in your Airport Express log, then seems that can be caused (at least one option is:) streaming iTunes music through the AE.
    Solution: Deactivate DHCP on the Express via the Aiport Management Utility, and fix it's IP and DNS settings to something coherent with your network. Save the settings to the Express, it reboots and your are done.
    (If you continue monitoring the logs, the "Deauthenticated..." message above keeps on happening, but the Express now recovers fast enough so that iTunes never notices)
    So just avoid DHCP if that is your scenario and all will come back normality.
    Please let me know if all is OK after this.

  • I have itunes set up to sync with my Ipod Touch and my Ipad.  As of today, it keeps looking for an iPhone to sync with and give me an error message.  I don't have an iPhone and don't know how to stop it from popping open with this error message.

    I have Itunes set up to sync with my Ipod touch and Ipad.  As of today, iTunes has started searching to sync with an iPhone, which I don't have and pops open with an error message stating it cannot locate the iPhone to sync.  I have looked in devices and only the iPad and iPod Touch are listed.  Any ideas on how to stop iTunes from searching for any iPhone it is never going to find? It is annoying to have it popping up all the time with the error message.  Thanks in advance for any suggestions.

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • Why the modem deconncts frequently with this error message, "You were disconnected by the PPP server. Try reconnecting."? Please, help me out.

    Hello. I am using a ZTE 3G modem. Whenever I connect to internet, Sometimes during browsing or downloading it disconnects with the error message, "You were disconnected by the PPP server. Try reconnecting." There is no problem with the modem. Last few months, I have used it with Mac OS X Mavericks. There was no problem. Some days ago, I downgrade to Mac OS X 10.8.3, because I was fed up with different bugs in 10.9. Anyway, the first two days the connection were fine. But, after that, The problem began from no where. I tryed everything i could, but, It didn't help.
    Please, help me out. It's very disturbing frequanlty disconnection. I am mad at the PPP is like, if I found standing it in front of me, I would beat it with a bat, who gave this so called Mr. PPP permission to disconnect my connection as it's wish!

    Hi I'm having same issue since last week and now unable to reconnect. Not sure if it's an issue with the mobile company, modem or apple .
    Before was able to connect eventually now connects and drops connection after 3 seconds . Using macbookpro early 2014 mavericks all ipdate - modem 4G Huawei
    Haven't found any info to assist us
    Hope someone comes forward soon
    Thanks and good luck !

  • I need help with this error message "seek encountered an internal error"

    I wonder if anyone can help me with a Captivate issue: I just upgraded to 5.5 - when I try to insert a video slide I get an error "seek encountered an internal error". The video is a 35.3 MB flv file.
    This is a prroject that I have been working on for months and need to switch the video on the slide to an updated video - so I try to delete the video slide that is there and insert a new slide but when browse for the new video file I want to use, I keep getting this error message.

    Try <fx:XML>

  • Can anybody help me with this error message I keep getting

    When I try to export my document as a pdf I keep getting this error message...  "The document “Client Invoice_TMC copy” could not be exported as...."

    What version of Numbers?What version of Mac OS X?
    Have you tried restarting Numbers?
    Have you tried restarting your computer?
    Can you export other documents to pdf?
    Have you tried printing the docmment to pdf using the built-in print dialog?  To do this select the menu item "File > Print", then click the print button, then select the "Open in Preview" select from the PDF button in the bottom left corner:

Maybe you are looking for

  • Can't receive fax LaserJet Pro MFP M127fw

    While I can send faxes on my LaserJet Pro MFP M127fw, I can't receive them.  I've downloaded the newest software & drivers, and the LaserJet Firmware Update utility, and run the fax test, with the report indicating it passed.

  • Data not coming on second page of smartform

    Dear All, I am having a smartform . The smartform displays 7 items on first page 7 on next and so on. The problem is if there are total 10 items , the smartform is showing 7 items correctly on first page but showing only one item i.e 8th item on the

  • Serious bug

    Working on my site in Muse when suddenly PINK!!     The whole document became pink! It should be white. I can't find where it has come from or why it's there. It only exists in edit, not in preview mode. The pink background also exists in the master

  • How to add/modify the running toal by SDK?

    I am working on CR2008 SP2. By SDK, I found that I can access running total field, get properties of this kind field. but I can not add or modify it. How to solve this issue?

  • ORA-29786: SIHA attribute GET failed with error [Attribute 'ASM_DISKSTRING'

    Hi, I un-register below services to configure them with solaris SMF (I know oracle won't support SMF yet). they are running quite good, but only issue we are facing was RBAL create error logs in trace file. /u01/grid/oracle/product/11.2.0/asm_1/bin/c